[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[untalented]

Funny but the best settings for hd7950 (1044/1500Mhz) on my rigs is the same like on 280x
-w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --expiry 10 --scan-time 1 --queue 0
Hd 7950 works ~100khs without HW errors is good for me.
Someone maybe have better results on hd7950?

here's my sapphire rig 3x 7950's.   Also have 3x powercolors they are 125Khs


good thing I check too; hadn't noticed room temp...whoops

I've tried exact multipliers, at least on scrypt, and they never hashed as well as TC's close to them in intervals of about  60 TC.  And I can't go above 33,000 wihtout one card getting the error 4 - blah blah blah something about enqueing a kernel.  Basically I don't have enough RAM to run 4 cards at a TC higher than 32xxxx.  I actually tried 33,792 (approx) and it works okay... except 1 card doesn't load.  I actually raised the "-w"  because I was having card failures at lower numbers.  I typically have never moved it from 256 and thought a lower number would work but it failed worse.  Much like when I had 8xxx as the TC, I got nothing but HW for some reason.  This N is messing with my cards pretty badly.  

did you by chance try doing -G 2 instead?   16,896 and  18,304   and 19,712  
just another thought ;P

Protagonus
Can you post your settings hd7950?

[nanoprobe]

Best settings for me on 280x:



setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0

Now getting Rejects.

Getting a small % of rejects is normal. It's HW errors that should be 0

I am not getting any Accepts and HW errors.It just finds blocks but not Accepts.

Was it working before the N-factor changed?

[Ookami999]

Anyone have a working config for ASUS R9 280x? Everything I try gives me HW errors.  

try

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600  -g 2 -w 256 -I 12 --lookup-gap 2 --thread-concurrency 16484 --gpu-engine 1000 --gpu-memclock 1500

Still HW errors.  

4x Asus R9 280x rig with 4gb of RAM running solid 130kh/s with no HW errors and no Rejects

--thread-concurrency 16484 -g 2 -I 12 -w 256 --lookup-gap 3 --gpu-powertune 20 --gpu-engine 1190 --gpu-memclock 1500



If it helps, donations are appreciated.

UgXqeXFF95SXntHDdHJnBX6SnvjGJmUQGN

Anyone have a working config for ASUS R9 280x? Everything I try gives me HW errors.  

try

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600  -g 2 -w 256 -I 12 --lookup-gap 2 --thread-concurrency 16484 --gpu-engine 1000 --gpu-memclock 1500

Still HW errors.  

Try TC 16384 instead if 16484

Tried that also. I have tried literally every config I saw here, nothing worked for me. It is strange tho cause before the N-Factor change I had no problems at all. This is my config BTW :

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 16384 -g 2 -I 12 -w 256 --lookup-gap 2 --gpu-memclock 1500 --gpu-engine 1100 --gpu-powertune 20 --temp-cutoff 90 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --temp-overheat 85

Try lookup-gap 3

I love you!   Getting ~ 120kh/s now without HW errors!

[sameev29]

Best settings for me on 280x:



setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0

Now getting Rejects.

Getting a small % of rejects is normal. It's HW errors that should be 0

I am not getting any Accepts and HW errors.It just finds blocks but not Accepts.

Was it working before the N-factor changed?

I didnt mine it before.Just trying now.

I gave you a message,please look.

[untalented]

Best settings for me on 280x:



setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0

Now getting Rejects.

Getting a small % of rejects is normal. It's HW errors that should be 0

I am not getting any Accepts and HW errors.It just finds blocks but not Accepts.

Use ultraminer from first page

https://bitcointalk.org/index.php?topic=413978.0

[sameev29]

Best settings for me on 280x:



setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0

Now getting Rejects.

Getting a small % of rejects is normal. It's HW errors that should be 0

I am not getting any Accepts and HW errors.It just finds blocks but not Accepts.

Use ultraminer from first page

https://bitcointalk.org/index.php?topic=413978.0

You mean to download 'Windows GPU  |  Mirror' on first page?

[nanoprobe]

Best settings for me on 280x:



setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0

Now getting Rejects.

Getting a small % of rejects is normal. It's HW errors that should be 0

I am not getting any Accepts and HW errors.It just finds blocks but not Accepts.

Was it working before the N-factor changed?

I didnt mine it before.Just trying now.

I gave you a message,please look.

Replied. Sounds like you're using the wrong version of cgminer.

[imginy]

come on lets pump this coin.

I'm putting everything I got in to it.

[Navyman47]

I love you!   Getting ~ 120kh/s now without HW errors!

   

[red5standingby]

imginy, if it didn't take forever to get btc from coinbase, I'd be jumping in that pool with you. Hopefully tonight. I hate coinbase.

[fredeq]

Sigh, I spam for lookup-gap 3 on last 3 pages but noone listens. Are my posts invisible...

Edit: Sorry for bitching, had a rough day.

[lemfuture]

Sigh, I spam for lookup-gap 3 on last 3 pages but noone listens. Are my posts invisible...

or maybe you're blocked? 

[Navyman47]

Sigh, I spam for lookup-gap 3 on last 3 pages but noone listens. Are my posts invisible...

I listened and I thank you.  I continued to spread the word.

[untalented]

we need good setting for 290/290x without HW errors. 250 UTC waiting

[imginy]

imginy, if it didn't take forever to get btc from coinbase, I'd be jumping in that pool with you. Hopefully tonight. I hate coinbase.

Hopefully only way is up from here

[Ookami999]

Sigh, I spam for lookup-gap 3 on last 3 pages but noone listens. Are my posts invisible...

Sorry I did not saw your posts. I love you too then!   About something else now, does anyone tried CPU mining? I tried with yacoin CPU miner but didn't made it work.

[NewSapUser]

many HW:

 cgminer version 3.7.2 - Started: [2014-03-01 00:17:28]
--------------------------------------------------------------------------------
 (5s):476.6K (avg):472.5Kh/s | A:4032  R:160  HW:47  WU:270.2/m
 ST: 2  SS: 0  NB: 31  LW: 2456  GF: 0  RF: 0
 Connected to ultra.nitro.org diff 64 with stratum as user *****.3
 Block: 3762c0cd...  Diff:2  Started: [00:32:07]  Best share: 1.98K
--------------------------------------------------------------------------------
 [P]ool management [G]PU management ettings [D]isplay options [Q]uit
 GPU 0:  56.0C 2437RPM | 94.58K/94.86Kh/s | A: 768 R: 0 HW: 7 WU: 49.2/m I:16
 GPU 1:  44.0C 2359RPM | 94.60K/94.86Kh/s | A:1024 R:64 HW:14 WU: 70.5/m I:16
 GPU 2:  56.0C 2378RPM | 94.58K/94.86Kh/s | A: 704 R: 0 HW:11 WU: 45.7/m I:16
 GPU 3:  52.0C 2424RPM | 94.60K/94.86Kh/s | A: 736 R: 0 HW: 9 WU: 48.6/m I:16
 GPU 4:  48.0C 2335RPM | 94.30K/94.65Kh/s | A: 800 R:96 HW: 6 WU: 56.3/m I:16
--------------------------------------------------------------------------------

conf:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
ultracoinminer --scrypt-jane  -o stratum+tcp://ultra.nitro.org:3337 -u *******.3 -p aercbz!@# --sj-nfmin 4 --sj-nfmax 30  --sj-time 1388361600 -I 16 -s 1 -g 1 -w 256 -v 1 --thread-concurrency 16384 --gpu-engine 1100 --gpu-memclock 1400 --gpu-powertune 20 --gpu-fan 60%

what wrong? why many HW?

[dooman13]

some of the top hashers are at 28000kh..how? 10000 rigs?

[Navyman47]

Website Maintenance Dear Binarians
Since our launch we have been encouraged through your support and cooperation in making the exchange a success. During this week you highlighted several bugs that have hindered your experience on the platform. Listening to our community and following your lead on how we should conduct our services is embedded in our culture. In line with this and the priority we give to ensuring your experience is seamless, fun and memorable. The dev team have been given a time frame of two weeks to address all issues and return the platform bug free. We also want to take this opportunity to assure you that all successful candidates will have their $50 pre loaded in their accounts on our return. Binary Fund Team

Here we go again.  

[Protagonus]

here's my sapphire rig 3x 7950's.   Also have 3x powercolors they are 125Khs


good thing I check too; hadn't noticed room temp...whoops

Protagonus
Can you post your settings hd7950?

Code:

  --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 18 -w 512 -g 1 --gpu-engine 1080 --gpu-memclock 1600 --gpu-powertune 20 --thread-concurrency 35840 --queue 0  --scan-time 1  --expiry 8 --no-submit-stale