[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[btcbro]

Let's make this HUGE everyone so it makes headlines!

Facebook Promotion Wallet: UV65rd1p2D5TcAihXm4vdSWy89tTLajoEf
http://bitgo.pw:3731/address/UV65rd1p2D5TcAihXm4vdSWy89tTLajoEf
This above address is managed by Ultracoin Dev @bumface.

Current balance# 1800 UTC

What this is about:
https://bitcointalk.org/index.php?topic=413978.msg5461523#msg5461523
https://bitcointalk.org/index.php?topic=413978.msg5461676#msg5461676
https://bitcointalk.org/index.php?topic=413978.msg5464443#msg5464443
https://bitcointalk.org/index.php?topic=413978.msg5467262#msg5467262

+100 UTC on the way. spread the word guys. 

[skribnod]

I have tried everything to get my pair of 280x mining. Best i can get is 70khs each. I only have 2gigs of system ram but never had a problem before with it. Anyone have a good working scrypt for 280x cards? If the ram is a problem i may just have to mine a alt coin and sell for UTC.

Ps: whats the best alt right now for the 280x?

Thanks

[TheStuhlman]

Ok back from lunch and nobody dumped anything into my buy wall  and my wall went down the list can you guys be nice and let me buy some @ 0.00015 somebody keeps racing me on the way up  

[jakiman]

Blockexplorer is DOWN?

http://bitgo.pw:3731/address/UV65rd1p2D5TcAihXm4vdSWy89tTLajoEf

It would also be great if it could just work via port 80 as my work firewall doesn't allow these ports.

[Mikebeav3r]

Pointing ALL my hash power at UTC right now, only getting 70-75KH/s per 280x, but they are also pulling a LOT less power than normal scrypt and it's helping out the cause, still not sold any of my mined coins, hoarding them all up

[solarflareq]

Ok back from lunch and nobody dumped anything into my buy wall  and my wall went down the list can you guys be nice and let me buy some @ 0.00015 somebody keeps racing me on the way up  

be nice?? what is that??

[skribnod]

Pointing ALL my hash power at UTC right now, only getting 70-75KH/s per 280x, but they are also pulling a LOT less power than normal scrypt and it's helping out the cause, still not sold any of my mined coins, hoarding them all up

Is 75khs per 280x what others are getting? I thought it was suppose to be around 130khs?

[solarflareq]

about 85kh/s on my 7970 @ 1250/1850 clock speeds.

[jakiman]

Pointing ALL my hash power at UTC right now, only getting 70-75KH/s per 280x, but they are also pulling a LOT less power than normal scrypt and it's helping out the cause, still not sold any of my mined coins, hoarding them all up

about 85kh/s on my 7970 @ 1250/1850 clock speeds.

You should be getting at least 110 KH/s with each 280x/7970. (Over 130KH/s if you have 8GB of RAM or more)
http://www.reddit.com/r/official_utc/comments/1z93t9/cgminer_configs_for_new_nfactor/

[TheStuhlman]

I am not seeing enough pressure on BigVern yet, you people are not loud enough on twitter. We want him to scream "Enough Enough", tweet @cryptsy all day today. Show him you are solid. Follow and Retweet: https://twitter.com/JStuhlman

[solarflareq]

Pointing ALL my hash power at UTC right now, only getting 70-75KH/s per 280x, but they are also pulling a LOT less power than normal scrypt and it's helping out the cause, still not sold any of my mined coins, hoarding them all up

about 85kh/s on my 7970 @ 1250/1850 clock speeds.

You should be getting at least 110 KH/s with each 280x/7970. (Over 130KH/s if you have 8GB of RAM or more)
http://www.reddit.com/r/official_utc/comments/1z93t9/cgminer_configs_for_new_nfactor/

tyvm 170kh/s with that 280x config. much much better.

guess that solves the hw errors without dropping the intensity down to much.

[skribnod]

Pointing ALL my hash power at UTC right now, only getting 70-75KH/s per 280x, but they are also pulling a LOT less power than normal scrypt and it's helping out the cause, still not sold any of my mined coins, hoarding them all up

about 85kh/s on my 7970 @ 1250/1850 clock speeds.

You should be getting at least 110 KH/s with each 280x/7970. (Over 130KH/s if you have 8GB of RAM or more)
http://www.reddit.com/r/official_utc/comments/1z93t9/cgminer_configs_for_new_nfactor/

tyvm 170kh/s with that 280x config. much much better.

guess that solves the hw errors without dropping the intensity down to much.

So i need more system ram? I only have 2 gigs and that has been enough up till now. Guess i better order some. Will use the rig for something else on the future anyway i guess.

[fiatslugg]

Been lurking on the forum for a while. Long term investor here who initially bought in because I thought Reggie Middleton was going to be involved with this, but holding because I can see the potential.

Sent over a modest 101 UTC to the Facebook Campaign. Thanks to all those who are volunteering, cheers.

[nanoprobe]

about 85kh/s on my 7970 @ 1250/1850 clock speeds.

Something is very wrong with your set up. I get 140 kh/s from my 7970. Here is my config settings. Hope it helps.


"api-allow" : "W:127.0.0.1",
"api-listen" : true,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "1",
"kernel-path" : "/usr/local/bin",
"log" : "5",
"no-submit-stale" : true,
"queue" : "0",
"scan-time" : "30",
"scrypt" : true,
"shares" : "0",
"gpu-threads" : "2",
"gpu-dyninterval" : "7",
"gpu-engine" : "1150-1150",
"gpu-fan" : "0-85",
"gpu-platform" : "0",
"gpu-memclock" : "1600",
"gpu-memdiff" : "0",
"gpu-powertune" : "20",
"gpu-vddc" : "0",
"intensity" : "12",
"temp-target" : "75",
"temp-overheat" : "85",
"temp-cutoff" : "90",
"temp-hysteresis" : "3",
"vectors" : "1",
"worksize" : "256",
"lookup-gap" : "0",
"shaders" : "0",
"thread-concurrency" : "18432",
"no-pool-disable" : true,
"scrypt-jane" : true

[solarflareq]

we figured it out the above post there got me alot more hash i had been running 10 intensity on old config to avoid hw error and much lower TC ..
sadly now that 7970 is close to hashing same as my 290x lol :*( and thats also with the 290x using the recomended config on that list.

[Mikebeav3r]

Pointing ALL my hash power at UTC right now, only getting 70-75KH/s per 280x, but they are also pulling a LOT less power than normal scrypt and it's helping out the cause, still not sold any of my mined coins, hoarding them all up

about 85kh/s on my 7970 @ 1250/1850 clock speeds.

You should be getting at least 110 KH/s with each 280x/7970. (Over 130KH/s if you have 8GB of RAM or more)
http://www.reddit.com/r/official_utc/comments/1z93t9/cgminer_configs_for_new_nfactor/

Still can't get above 75, even with those settings

[Jacques21]

With a gruff neck beard and eyes full of self confidence, a real trader knows that the moon will soon come.

[tanalith]

we figured it out the above post there got me alot more hash i had been running 10 intensity on old config to avoid hw error and much lower TC ..
sadly now that 7970 is close to hashing same as my 290x lol :*( and thats also with the 290x using the recomended config on that list.

200KH/s no HW on MSI 290X 4G Gaming

-I 20 -w 64 --lookup-gap 2 --gpu-engine 1100 --gpu-memclock 1250 --scan-time 1 --queue 0 --no-submit-stale --thread-concurrency 56320

[fabietech]

I am not seeing enough pressure on BigVern yet, you people are not loud enough on twitter. We want him to scream "Enough Enough", tweet @cryptsy all day today. Show him you are solid. Follow and Retweet: https://twitter.com/JStuhlman

+1 you can facebook all you want!!! but we need a good exchange like cryptsy!!! come on!! lets vote and make cryptsy add us!!! its the only way
Dont only give a reaction alse say you like the post!!

https://cryptsy.freshdesk.com/support/discussions/topics/75770

[Navyman47]

Someone's trying to dump and manipulate the price on Mintpal.  Build the sell walls and eat it into the dump.