[ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency

[coins101]

I got an email from the bitcoin foundation asking me to comment on the New York regs.

Ok, I was doing a bit of moonlighting on bitcoin

[1715506409]

1715506409

[1715506409]

1715506409

[1715506409]

1715506409

[1715506409]

1715506409

[1715506409]

1715506409

[TanteStefana2]

+1 on xpool. Tried it and loved it !! Just have to get used to shifts thing if you've never done it before. Its great! It works. It rocks! Does wonders for DRK.

 Keep up the great work guys

Oh, do you have to keep an eye on the shifts?  I mean, I'm really getting close to a payout at slush's pool, and want to switch to xpool so I never have to think about it again, LOL.  Also, I'm hoping that I can do a little better with someone managing my hash, LOL.  But I don't think I'll be able to be "on top of it" if we have to manually switch when there is a shift to another coin? 

[Ignition75]

some advice guys about the following tip i got for my AMD R280X thats currently running at 4.3 MH/s for X11
(using SGminer v5 with -k darkcoin-mod) --> http://www.reddit.com/r/DRKCoin/comments/2bbqt3/holy_cow_batman_i_just_downloaded_the_new_sgminer/


*****************************************************************************************
press g on sgminer, then press x. after that type 500 and press enter. tell me if that boosts your hashrate.
I think you need more than 4-8gb of ram for it to run without hardware errors though. DDR3 ram to be exact.
I also have the new pci express i think its either 2.0 or 3.0 i have to check.
*****************************************************************************************

what does that x 500 (--xintensity 500) precisely do ? i dont feel like blowing up my graphic card just to find out...

btw.. this is my current batch file (i dont use conf. files) :

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
c:\sgminerdarkcoin\sgminer.exe -k darkcoin-mod -o stratum+tcp://stratum-eu.suchpool.pw:3335 --failover-switch-delay 60 --no-submit-stale --gpu-dyninterval 7 --gpu-platform 0 --api-mcast-port 4028 --api-port 4028 --expiry 1 --log 5 --no-pool-disable --tcp-keepalive 30 --temp-hysteresis 3 --shares 0 --vectors 1 -u YrUsername.1 -p Yrpassword --expiry 1 --queue 0 --scan-time 1 --gpu-engine 1150 --gpu-memclock 1500 -g 2 -w 256 --lookup-gap 2 -I 18 --thread-concurrency 8192 --shaders 2048

As I've gone full retard and moved into my warehouse where my farm is located, I've gone for the low power/low noise option for my rigs... They still do OK in terms of speed, if anyone is interested here's a whisper quiet config for the fans and it sucks less power:

290 @ 4.7 Mhs (Core Clock 520, MemClock 625) -I 17 --expiry 1 --queue 0 --scan-time 1 --temp-target 75 --auto-fan --no-submit-stale
280x @ 3.8 Mhs (Core Clock 535, MemClock 735) -g 2 -w 256 --thread-concurrency 8192 -I 15 --expiry 1 --queue 0 --scan-time 1 --temp-target 75 --auto-fan --gpu-fan 10-85 --no-submit-stale.
270x @ 2.9 Mhs (Core Clock 575, MemClock 750)  -g 2 -w 64 --thread-concurrency 8192 --rawintensity 81920 --expiry 1 --queue 0 --scan-time 1 --no-submit-stale

rem setx GPU_MAX_HEAP_SIZE 100
rem setx GPU_USE_SYNC_OBJECTS 1
rem setx GPU_MAX_ALLOC_PERCENT 100

Enjoy  

[crackfoo]

+1 on xpool. Tried it and loved it !! Just have to get used to shifts thing if you've never done it before. Its great! It works. It rocks! Does wonders for DRK.

 Keep up the great work guys

Oh, do you have to keep an eye on the shifts?  I mean, I'm really getting close to a payout at slush's pool, and want to switch to xpool so I never have to think about it again, LOL.  Also, I'm hoping that I can do a little better with someone managing my hash, LOL.  But I don't think I'll be able to be "on top of it" if we have to manually switch when there is a shift to another coin?  

It's all automated. The pool chooses which coin get mined and everyone's hash is automatically transitioned, without interruption, to the next coin. Those coins are then exchanged automatically and the BTC/LTC proceeds are then used to buy up DRK, then your are sent your share of DRK that is relative to the % you contributed.

You do have to give it some time to "ramp" up and get a solid spread of shares. You only get paid for blocks you've contributed to and have matured. So if the pool finds blocks during your shift, you may not actually received the DRK for those coins until the next shift if the block hasn't matured before the end of the shift.

That being said... someone on the darkcointalk board was happy to see when they had to move and turn off all their miners, they actually still earned dark on the 2 days they were moving because some of the share they had contributed to, didn't get confirmed for a couple days. That includes if you mined on a coin and no block was found, it all carries over.

Cheers!

[coins101]

some advice guys about the following tip i got for my AMD R280X thats currently running at 4.3 MH/s for X11
(using SGminer v5 with -k darkcoin-mod) --> http://www.reddit.com/r/DRKCoin/comments/2bbqt3/holy_cow_batman_i_just_downloaded_the_new_sgminer/


*****************************************************************************************
press g on sgminer, then press x. after that type 500 and press enter. tell me if that boosts your hashrate.
I think you need more than 4-8gb of ram for it to run without hardware errors though. DDR3 ram to be exact.
I also have the new pci express i think its either 2.0 or 3.0 i have to check.
*****************************************************************************************

what does that x 500 (--xintensity 500) precisely do ? i dont feel like blowing up my graphic card just to find out...

btw.. this is my current batch file (i dont use conf. files) :

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
c:\sgminerdarkcoin\sgminer.exe -k darkcoin-mod -o stratum+tcp://stratum-eu.suchpool.pw:3335 --failover-switch-delay 60 --no-submit-stale --gpu-dyninterval 7 --gpu-platform 0 --api-mcast-port 4028 --api-port 4028 --expiry 1 --log 5 --no-pool-disable --tcp-keepalive 30 --temp-hysteresis 3 --shares 0 --vectors 1 -u YrUsername.1 -p Yrpassword --expiry 1 --queue 0 --scan-time 1 --gpu-engine 1150 --gpu-memclock 1500 -g 2 -w 256 --lookup-gap 2 -I 18 --thread-concurrency 8192 --shaders 2048

As I've gone full retard and moved into my warehouse where my farm is located, I've gone for the low power/low noise option for my rigs... They still do OK in terms of speed, if anyone is interested here's a whisper quiet config for the fans and it sucks less power:

290 @ 4.7 Mhs (Core Clock 520, MemClock 625) -I 17 --expiry 1 --queue 0 --scan-time 1 --temp-target 75 --auto-fan --no-submit-stale
280x @ 3.8 Mhs (Core Clock 535, MemClock 735) -g 2 -w 256 --thread-concurrency 8192 -I 15 --expiry 1 --queue 0 --scan-time 1 --temp-target 75 --auto-fan --gpu-fan 10-85 --no-submit-stale.
270x @ 2.9 Mhs (Core Clock 575, MemClock 750)  -g 2 -w 64 --thread-concurrency 8192 --rawintensity 81920 --expiry 1 --queue 0 --scan-time 1 --no-submit-stale

rem setx GPU_MAX_HEAP_SIZE 100
rem setx GPU_USE_SYNC_OBJECTS 1
rem setx GPU_MAX_ALLOC_PERCENT 100

Enjoy  

290 @ 4.7 Mhs (Core Clock 520, MemClock 625) -I 17 --expiry 1 --queue 0 --scan-time 1 --temp-target 75 --auto-fan --no-submit-stale

+101

I'll check against mine on Sat.
thanks

[goodluckpool]

some advice guys about the following tip i got for my AMD R280X thats currently running at 4.3 MH/s for X11
(using SGminer v5 with -k darkcoin-mod) --> http://www.reddit.com/r/DRKCoin/comments/2bbqt3/holy_cow_batman_i_just_downloaded_the_new_sgminer/


*****************************************************************************************
press g on sgminer, then press x. after that type 500 and press enter. tell me if that boosts your hashrate.
I think you need more than 4-8gb of ram for it to run without hardware errors though. DDR3 ram to be exact.
I also have the new pci express i think its either 2.0 or 3.0 i have to check.
*****************************************************************************************

what does that x 500 (--xintensity 500) precisely do ? i dont feel like blowing up my graphic card just to find out...

btw.. this is my current batch file (i dont use conf. files) :

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
c:\sgminerdarkcoin\sgminer.exe -k darkcoin-mod -o stratum+tcp://stratum-eu.suchpool.pw:3335 --failover-switch-delay 60 --no-submit-stale --gpu-dyninterval 7 --gpu-platform 0 --api-mcast-port 4028 --api-port 4028 --expiry 1 --log 5 --no-pool-disable --tcp-keepalive 30 --temp-hysteresis 3 --shares 0 --vectors 1 -u YrUsername.1 -p Yrpassword --expiry 1 --queue 0 --scan-time 1 --gpu-engine 1150 --gpu-memclock 1500 -g 2 -w 256 --lookup-gap 2 -I 18 --thread-concurrency 8192 --shaders 2048

As I've gone full retard and moved into my warehouse where my farm is located, I've gone for the low power/low noise option for my rigs... They still do OK in terms of speed, if anyone is interested here's a whisper quiet config for the fans and it sucks less power:

290 @ 4.7 Mhs (Core Clock 520, MemClock 625) -I 17 --expiry 1 --queue 0 --scan-time 1 --temp-target 75 --auto-fan --no-submit-stale
280x @ 3.8 Mhs (Core Clock 535, MemClock 735) -g 2 -w 256 --thread-concurrency 8192 -I 15 --expiry 1 --queue 0 --scan-time 1 --temp-target 75 --auto-fan --gpu-fan 10-85 --no-submit-stale.
270x @ 2.9 Mhs (Core Clock 575, MemClock 750)  -g 2 -w 64 --thread-concurrency 8192 --rawintensity 81920 --expiry 1 --queue 0 --scan-time 1 --no-submit-stale

rem setx GPU_MAX_HEAP_SIZE 100
rem setx GPU_USE_SYNC_OBJECTS 1
rem setx GPU_MAX_ALLOC_PERCENT 100

Enjoy  

280x @ 3.8 Mhs (Core Clock 535, MemClock 735), I will give this a try to make the cards last longer

[CryptoChronic]

 

 

[coins101]

not the best time to be doing that sort of thing.

I think you would do well to delete that post Mr XC supporter.

[splawik21]

+1 on xpool. Tried it and loved it !! Just have to get used to shifts thing if you've never done it before. Its great! It works. It rocks! Does wonders for DRK.

 Keep up the great work guys

Oh, do you have to keep an eye on the shifts?  I mean, I'm really getting close to a payout at slush's pool, and want to switch to xpool so I never have to think about it again, LOL.  Also, I'm hoping that I can do a little better with someone managing my hash, LOL.  But I don't think I'll be able to be "on top of it" if we have to manually switch when there is a shift to another coin? 

TanteS you just point your miners at xpool and you dont need to do anything else. They think about everything. There are 3 algos and the shifts mean every algo has its time but all algos mine 24/24... After all btc earned change name through exchange on drk which goes on every miners drk address thats all so simple.

[goodluckpool]

280x @ 3.8 Mhs (Core Clock 535, MemClock 735) -g 2 -w 256 --thread-concurrency 8192 -I 15 --expiry 1 --queue 0 --scan-time 1 --temp-target 75 --auto-fan --gpu-fan 10-85 --no-submit-stale.

epic fail, I am getting 1.9 Mhs, did you count 2 cards?

I was getting 4.2 MHs

[Ignition75]

280x @ 3.8 Mhs (Core Clock 535, MemClock 735), I will give this a try to make the cards last longer

Also be aware it's Winter in Australia so that is not a summer configuration, temps on each 280x are around 60 degrees and fans are less than 20%.  I've left enough padding for when the weather changes, I shouldn't have to tweak too much.

Using 14.6 Beta.

[Ignition75]

280x @ 3.8 Mhs (Core Clock 535, MemClock 735) -g 2 -w 256 --thread-concurrency 8192 -I 15 --expiry 1 --queue 0 --scan-time 1 --temp-target 75 --auto-fan --gpu-fan 10-85 --no-submit-stale.

epic fail, I am getting 1.9 Mhs, did you count 2 cards?

I was getting 4.2 MHs

What drivers and miner are you using?

[goodluckpool]

280x @ 3.8 Mhs (Core Clock 535, MemClock 735) -g 2 -w 256 --thread-concurrency 8192 -I 15 --expiry 1 --queue 0 --scan-time 1 --temp-target 75 --auto-fan --gpu-fan 10-85 --no-submit-stale.

epic fail, I am getting 1.9 Mhs, did you count 2 cards?

I was getting 4.2 MHs

BTW, I actually set those number with --gpu-engine 535 and --gpu-memclock 735

I think if you don't set, you were running at full speed, just lower -I 15

press g in your sgminer window to check

[Ignition75]

280x @ 3.8 Mhs (Core Clock 535, MemClock 735) -g 2 -w 256 --thread-concurrency 8192 -I 15 --expiry 1 --queue 0 --scan-time 1 --temp-target 75 --auto-fan --gpu-fan 10-85 --no-submit-stale.

epic fail, I am getting 1.9 Mhs, did you count 2 cards?

I was getting 4.2 MHs

BTW, I actually set those number with --gpu-engine 535 and --gpu-memclock 735

I think if you don't set, you were running at full speed, just lower -I 15

press g in your sgminer window to check

I'm using MSI Afterburner Profiles, I find it easier to play on the fly...

I was going to suggest, you can keep clocks at standard speeds, it doesn't seem to make that much difference on power and speed with 14.6... I just do it for good measure...

[CryptoGretzky]

not the best time to be doing that sort of thing.

I think you would do well to delete that post Mr XC supporter.

You know how easy it will be for a new account to create some "crap" and post as a DRK "supporter" everywhere and make the DRK community look bad?   Do you really think that this is really a XC supporter and not some other coins supporter?

This one is actually from Cloak supporter...  Pookie and Mr.boh

https://twitter.com/cryptoboh/status/491621747712860160

[Toninho]

 

[goodluckpool]

280x @ 3.8 Mhs (Core Clock 535, MemClock 735) -g 2 -w 256 --thread-concurrency 8192 -I 15 --expiry 1 --queue 0 --scan-time 1 --temp-target 75 --auto-fan --gpu-fan 10-85 --no-submit-stale.

epic fail, I am getting 1.9 Mhs, did you count 2 cards?

I was getting 4.2 MHs

BTW, I actually set those number with --gpu-engine 535 and --gpu-memclock 735

I think if you don't set, you were running at full speed, just lower -I 15

press g in your sgminer window to check

I'm using MSI Afterburner Profiles, I find it easier to play on the fly...

I was going to suggest, you can keep clocks at standard speeds, it doesn't seem to make that much difference on power and speed with 14.6... I just do it for good measure...

thanks for the suggestion, never mind. I still want to say its impossible to do 3.8Mhs on 280x if your cards are actually running at Core Clock 535, MemClock 735, and I don't think using afterburner profiles is the right way to go. good luck.

[Ignition75]

thanks for the suggestion, never mind. I still want to say its impossible to do 3.8Mhs on 280x if your cards are actually running at Core Clock 535, MemClock 735, and I don't think using afterburner profiles is the right way to go. good luck.

It makes no difference how I adjust clocks... It's a leftover from the very first NIST5 miner not having the ability to adjust clocks within the software, I haven't gotten around to updating my farm.

I ask again, what drivers are you using???

[Coolstoryteller]

not the best time to be doing that sort of thing.

I think you would do well to delete that post Mr XC supporter.

You know how easy it will be for a new account to create some "crap" and post as a DRK "supporter" everywhere and make the DRK community look bad?   Do you really think that this is really a XC supporter and not some other coins supporter?

This one is actually from Cloak supporter...  Pookie and Mr.boh

https://twitter.com/cryptoboh/status/491621747712860160

I wouldn't put it past an XC supporter - they have a tendency to hi-jack Cloak and DRK posts via reddit/twitter/articles. There's been a fair share of shameless XC plugs in the Cloak thread.

[MasterMined710]

Please delete your post and don't quote trolls. thanks