UnclWish
|
 |
November 29, 2020, 01:34:03 PM |
|
how can i know the manufacturer of the memories of my sapphire rx480? I not know if is Hynix, samsung, micron or other.
GPU-Z
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
|
|
|
|
KGSGRP.ITA
Newbie
Offline
Activity: 11
Merit: 0
|
 |
November 29, 2020, 02:35:56 PM Last edit: November 29, 2020, 03:10:35 PM by KGSGRP.ITA |
|
My operating system: Win 10 x64 GPU: AMD 480 8gb as in this picture https://ibb.co/HCpdWqQvideo driver: Adrenalin 2020 ver. 20.4.2 Miner: lolMiner 1.6 without making any changes "lolMiner 1.6" gives me 22.23 MH/s on ETH. All right for this GPU? Or can I do something to get better performance?
|
|
|
|
Alainmardirossian
Newbie
Offline
Activity: 8
Merit: 0
|
 |
November 29, 2020, 06:42:33 PM |
|
My operating system: Win 10 x64 GPU: AMD 480 8gb as in this picture https://ibb.co/HCpdWqQvideo driver: Adrenalin 2020 ver. 20.4.2 Miner: lolMiner 1.6 without making any changes "lolMiner 1.6" gives me 22.23 MH/s on ETH. All right for this GPU? Or can I do something to get better performance?1-changes straps to increase performance http://polaris-bios-editor.eu/2-Flash card https://www.techpowerup.com/download/ati-atiflash/look it up on youtube before doing it it could be tricky and scary the first time you do it also make sure you are on compute mode... GL
|
|
|
|
Frenia
Newbie
Offline
Activity: 4
Merit: 0
|
 |
November 29, 2020, 08:41:47 PM |
|
On page 1 it says support: Beam Hash III 3G / 4G
I'm trying with a AMD HD7970 card it gives me the following error: Setup Miner... Device 0: Name: AMD Radeon R9 200 / HD 7900 Series Address: 2:0 Vendor: Advanced Micro Devices (AMD) Memory: 3072 MByte (3022 MByte free) Active: false (Unsupported device or driver version.)
Connecting to pool... Connected to beam-us.leafpool.com:3333 (TLS enabled) TLS Handshake success
Am I doing something wrong?
|
|
|
|
sk0mi
Newbie
Offline
Activity: 24
Merit: 0
|
 |
November 29, 2020, 11:16:34 PM |
|
My operating system: Win 10 x64 GPU: AMD 480 8gb as in this picture https://ibb.co/HCpdWqQvideo driver: Adrenalin 2020 ver. 20.4.2 Miner: lolMiner 1.6 without making any changes "lolMiner 1.6" gives me 22.23 MH/s on ETH. All right for this GPU? Or can I do something to get better performance?Compute mode on?
|
|
|
|
ruslan4040
Member

Offline
Activity: 194
Merit: 10
|
 |
November 29, 2020, 11:31:01 PM |
|
On page 1 it says support: Beam Hash III 3G / 4G
I'm trying with a AMD HD7970 card it gives me the following error: Setup Miner... Device 0: Name: AMD Radeon R9 200 / HD 7900 Series Address: 2:0 Vendor: Advanced Micro Devices (AMD) Memory: 3072 MByte (3022 MByte free) Active: false (Unsupported device or driver version.)
Connecting to pool... Connected to beam-us.leafpool.com:3333 (TLS enabled) TLS Handshake success
Am I doing something wrong?
Same problem( win 8.1. and win 10 - different drivers) and in ETCHASH only 10mh per card
|
|
|
|
sxemini
Member

Offline
Activity: 1348
Merit: 42
|
 |
November 30, 2020, 10:33:17 AM |
|
AMD 380 and 380x not supported on etchash? I get "problem in building kernel" and miner close. Tested driver versions 20.2.2 and 18.6.1
|
|
|
|
abarth23
Newbie
Offline
Activity: 17
Merit: 0
|
 |
November 30, 2020, 10:53:06 AM |
|
RX 570 and 580 4gb only 22.3Mh or even less. Cards are bios flashed. Before i was getting 27-30 each . Now is much less. Drivers used Win10-Radeon-Software 20.4.2. I also tried the blockchain drivers and the latest drivers of AMD. Sometimes I even get 8Mh 16mh. Im using 1.16 I tried also 1,12 and 1.15 Lolminer. Compute mode is on. Is it only me who has this problem. Is anybody using other drivers which give more hashrate? Thanks
|
|
|
|
sxemini
Member

Offline
Activity: 1348
Merit: 42
|
 |
November 30, 2020, 11:50:04 AM |
|
RX 570 and 580 4gb only 22.3Mh or even less. Cards are bios flashed. Before i was getting 27-30 each . Now is much less. Drivers used Win10-Radeon-Software 20.4.2. I also tried the blockchain drivers and the latest drivers of AMD. Sometimes I even get 8Mh 16mh. Im using 1.16 I tried also 1,12 and 1.15 Lolminer. Compute mode is on. Is it only me who has this problem. Is anybody using other drivers which give more hashrate? Thanks
what are you mining? ETC, ETH, PIRL or what. I think you mine ETH and for this 22,3mh are normal, because 4gb are not enough for the DAG file.
|
|
|
|
abarth23
Newbie
Offline
Activity: 17
Merit: 0
|
 |
November 30, 2020, 12:00:29 PM |
|
I forgot the most important, yes I mine eth. Do you think I should start mining something else? Thanks
|
|
|
|
sxemini
Member

Offline
Activity: 1348
Merit: 42
|
 |
November 30, 2020, 12:32:08 PM |
|
how can i know the manufacturer of the memories of my sapphire rx480? I not know if is Hynix, samsung, micron or other.
GPU-Z RX 570 and 580 4gb only 22.3Mh or even less. Cards are bios flashed. Before i was getting 27-30 each . Now is much less. Drivers used Win10-Radeon-Software 20.4.2. I also tried the blockchain drivers and the latest drivers of AMD. Sometimes I even get 8Mh 16mh. Im using 1.16 I tried also 1,12 and 1.15 Lolminer. Compute mode is on. Is it only me who has this problem. Is anybody using other drivers which give more hashrate? Thanks
what are you mining? ETC, ETH, PIRL or what. I think you mine ETH and for this 22,3mh are normal, because 4gb are not enough for the DAG file. You can mine ETC (new algo EtcHash)
|
|
|
|
jgonzi
Member

Offline
Activity: 603
Merit: 19
|
 |
November 30, 2020, 01:47:22 PM |
|
I forgot the most important, yes I mine eth. Do you think I should start mining something else? Thanks
You should make your analysis... with ETH you will continue loosing Mhs each new EPOCH, but you are able to mine thanks to the lolMiner Zombie mode.... If you jump to ETChash you will recover all your Mhs. You should analize ETH (Zombie Mode ) vs ETCHash (Normal Mhs) or of course anyother of the Ethash coins (ETHO, EGEM, ELLA, ...)
|
|
|
|
jgonzi
Member

Offline
Activity: 603
Merit: 19
|
 |
November 30, 2020, 01:49:28 PM |
|
On page 1 it says support: Beam Hash III 3G / 4G
I'm trying with a AMD HD7970 card it gives me the following error: Setup Miner... Device 0: Name: AMD Radeon R9 200 / HD 7900 Series Address: 2:0 Vendor: Advanced Micro Devices (AMD) Memory: 3072 MByte (3022 MByte free) Active: false (Unsupported device or driver version.)
Connecting to pool... Connected to beam-us.leafpool.com:3333 (TLS enabled) TLS Handshake success
Am I doing something wrong?
Same problem( win 8.1. and win 10 - different drivers) and in ETCHASH only 10mh per card You haven't active the Compute mode... this 10Mhs is the typical Mhs without the compute mode ON.
|
|
|
|
abarth23
Newbie
Offline
Activity: 17
Merit: 0
|
 |
November 30, 2020, 02:19:30 PM |
|
Thanks a lot for your help
|
|
|
|
KGSGRP.ITA
Newbie
Offline
Activity: 11
Merit: 0
|
 |
November 30, 2020, 03:39:19 PM |
|
My operating system: Win 10 x64 GPU: AMD 480 8gb as in this picture https://ibb.co/HCpdWqQvideo driver: Adrenalin 2020 ver. 20.4.2 Miner: lolMiner 1.6 without making any changes "lolMiner 1.6" gives me 22.23 MH/s on ETH. All right for this GPU? Or can I do something to get better performance?1-changes straps to increase performance http://polaris-bios-editor.eu/2-Flash card https://www.techpowerup.com/download/ati-atiflash/look it up on youtube before doing it it could be tricky and scary the first time you do it also make sure you are on compute mode... GL Can you recommend any videos? Can you confirm that I need to modify the Samsung bios? (Have you seen my GPU photos? If I send you my Original Bios ... can you modify it for me  I have already seen some videos yesterday ... but I see that some modify the bios of the rx480 8gb "samsung" by inserting certain values .. others by inserting other values ... Well ... the YouTubers make a lot of confusion in me Someone give me a video guide accepted by the whole community
|
|
|
|
jgonzi
Member

Offline
Activity: 603
Merit: 19
|
 |
December 01, 2020, 12:41:59 PM |
|
My operating system: Win 10 x64 GPU: AMD 480 8gb as in this picture  video driver: Adrenalin 2020 ver. 20.4.2 Miner: lolMiner 1.6 without making any changes "lolMiner 1.6" gives me 22.23 MH/s on ETH. All right for this GPU? Or can I do something to get better performance?1-changes straps to increase performance http://polaris-bios-editor.eu/2-Flash card https://www.techpowerup.com/download/ati-atiflash/look it up on youtube before doing it it could be tricky and scary the first time you do it also make sure you are on compute mode... GL Can you recommend any videos? Can you confirm that I need to modify the Samsung bios? (Have you seen my GPU photos? If I send you my Original Bios ... can you modify it for me  I have already seen some videos yesterday ... but I see that some modify the bios of the rx480 8gb "samsung" by inserting certain values .. others by inserting other values ... Well ... the YouTubers make a lot of confusion in me Someone give me a video guide accepted by the whole community
https://www.youtube.com/watch?v=Um-0Vf38_c0Quite new video, but this post is to talk about the lolMiner
|
|
|
|
weifa
Sr. Member
  
Offline
Activity: 774
Merit: 308
GeoCoin Developer - GIS Technologist
|
 |
December 01, 2020, 09:46:20 PM |
|
Great job with lolMiner! I found your miner on a list of Etchash supported miners, great job supporting the new Ethash variant. I was wondering if you had any interest in adding support for Ubqhash? Here's some of the technicals to help explain the algo changes more in depth: https://blog.ubiqsmart.com/introducing-ubqhash-8fa515befd7Ubiq has quite a large community of miners, but the current number of mining programs is somewhat limited. I'm reaching out on behalf of the Ubiq community to see if you're interested in potentially adding Ubqhash support, thanks!
|
|
|
|
dwdhu
Newbie
Offline
Activity: 37
Merit: 0
|
 |
December 02, 2020, 02:05:12 AM |
|
Claymore miner died.
I am actively working on a solution to keep straps, rxboost and more optimizations working with other miner apps.
|
|
|
|
EthosRIG
Newbie
Offline
Activity: 29
Merit: 0
|
 |
December 02, 2020, 09:12:33 AM |
|
Hello guys,
I am having issues with lolminer setup in ethos. Below my configuration file:
maxgputemp 85 stratumproxy miner #BEAM proxywallet my_adress.733d0f proxypool1 beam-eu.leafpool.com:3333 flags --cl-global-work 8192 --farm-recheck 200 fan 733d0f 25 35 30 45 35 28 globalminer lolminer safevolt disabled cor 733d0f 1150 1150 1150 1150 1150 1150 mem 733d0f 2150 2050 2050 2050 2050 2050 vlt 733d0f 900 850 850 850 850 850
Miner loads properly, it connects to the pool but it disconnect immediately after. Any suggest?
|
|
|
|
bassistas
Newbie
Offline
Activity: 32
Merit: 0
|
 |
December 02, 2020, 09:23:08 AM |
|
Does anyone know why I am getting ~22mh/s on all my r9 390's 8GB with lolminer? It should be around 29mh/s
|
|
|
|
|