[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[miningpoolhub]

Greetings MPH ppl.

1. Didn't use my favorite MPH recently because of LBRY and PASC. Any hope they will be added?

(don't know if it is the right place, maybe should ask the MPOS people, but here goes nothing)
2. The pool-based autoswitching is king. But please make new category including "Ethash, Equihash, Myriad-Groestl, NeoScrypt, Skein, Groestl, Cryptonight, Lyra2RE2, Keccak" for Nvidia - as far as can see theese are the top profit algos.
3. I'd like to autoexchange some coins while stockpiling the others. Can you do distinct settings on site or parse them from password field of connected miner programs?
(next one is probably should go to EWBF's thread, but I think your request will have more weight then mine))
4. For me, EWBF's miner don't disconnect from the pool after it is left with no work regardless of its new "eexit" option.

Thanks in advance!

Greattings

1. Yeah they will be added.
But I can't guarantee ETA. Many works are delayed due to accidental coin maintenance these days. forking issue happened, some coin updates..
Anyway I do my best.

2. I can add that if you want.
But why is Keccak included? As maxcoin is not exchanged any more from most exchange sites, I think it's useless.

3. I will make some detailed auto exchange switch to control how much rate to be exchanged from newly mined coins. It will be on website interface.

4. I'll check it. I actually don't know what that option is.

[miningpoolhub]

Greeting Mining Pool Hub,

firstly, thank you for a great service. I have been using MPH for some of its individual pools for a while now, just experimenting initially but lately I have used your monero pool all the time because it is the only one I can find with a pool server close to me with a decent ping time. I live in Australia and use asia1.monero.miningpoolhub.com:20580. Another good thing here is that you allow the claymore client to make an encrypted connection and thus a lower dev fee. So I am very happy with all that stuff.

I have a question though about the various hash-rate measurements available which can sometimes confuse me a bit.

For example, if I look now at my "workers" tab and add all the individual numbers together it totals 7.6 mh/s but if I then open the "dashboard" tab it shows a figure of 6.71 mh/s then changes to 8.03 mh/s.

I just did the same thing after a few minutes and the "workers" totallled to 8.725 mh.s but the dashboard showed still 8.03 mh/s.

Does this mean that the "worker's data is collected more frequently and the "dashboard" is just a longer average? If I add all of the hash-rates reported by the rigs I use it's something like 8.8 mh/s and if I look at the "graphs" that is appromimately where my graph peaks, but it looks like the average is around 8.3 - 8.6 mh/s. So does this mean that my rigs are offering 8.8 mh/s but you are not able to utilize all that hash rate all the time? I know there are random fluctuations all the time but is there any way for me to improve my settings to raise my average up to what my rigs are reporting?

ethereum, ethereum-classic, zcash, zclassic have asia server as well.

Worker's data and dashboard's data can be different because dashboard data is from regularly cached data. But worker's data is measured dynamically when you open the page.
Pool is showing just estimated hashrate. It's not easy for pool to know actual hashrate. Pool just uses some probability mathematics to measure which means it's very rough result.

I believe your rigs are working fine. my rigs are reporting like that too.

I think claymore cryptonote miner's hashrate numbers are a bit bigger than actual due to memory bandwidth. I'm just guessing.

[PovertyByte]

It would be great if Decred could be added. It's not my most profitable mining coin but it's what I want to store up.

Besides DCR I have some auto exchange question. I read on the site that auto exchange will credit the coins to the target pool but everyone here is talking about needing a wallet. On the site it says that coins that don't have enough volume for exchange for a certain amount of time may be sent back to me or exchanged as bitcoin. How long does that extend past the 4-6 hour exchange intervals?

One thing I do not quite get. If auto exchange relies on exchanges like Bittrex, Yobit, and Poloniex, than why is the auto exchange even limited to the pools on MPH? At first my impression was that MPH acted as the exchange but if it travels through these other exchanges than I am wondering if auto exchange could be enabled for any given coin outside of MPH.

[lyolyalya]

hey.seen xzc coin now.
any stats?mining calculator?hashrates for 1070/
i have 1.333 Mhash now and only 40% TDP.is it normal?

[PovertyByte]

hey.seen xzc coin now.
any stats?mining calculator?hashrates for 1070/
i have 1.333 Mhash now and only 40% TDP.is it normal?

It's normal and it is good. AMD cards only pull 400 K/h so XZC is free game for NVidia for the meantime

[lyolyalya]

hey.seen xzc coin now.
any stats?mining calculator?hashrates for 1070/
i have 1.333 Mhash now and only 40% TDP.is it normal?

It's normal and it is good. AMD cards only pull 400 K/h so XZC is free game for NVidia for the meantime

nice=)but difficulty is too high now=(

[PovertyByte]

hey.seen xzc coin now.
any stats?mining calculator?hashrates for 1070/
i have 1.333 Mhash now and only 40% TDP.is it normal?

It's normal and it is good. AMD cards only pull 400 K/h so XZC is free game for NVidia for the meantime

nice=)but difficulty is too high now=(

I do not know how to calculate profitability other than mining for 2 hours and calculating the average for the day

Difficulty comes from the interest in ZCoin to rise probably. It's a real threat to XMR gone silent to begin with and superior to the copy cat special interest ZCash

[lyolyalya]

hey.seen xzc coin now.
any stats?mining calculator?hashrates for 1070/
i have 1.333 Mhash now and only 40% TDP.is it normal?

It's normal and it is good. AMD cards only pull 400 K/h so XZC is free game for NVidia for the meantime

nice=)but difficulty is too high now=(

I do not know how to calculate profitability other than mining for 2 hours and calculating the average for the day

Difficulty comes from the interest in ZCoin to rise probably. It's a real threat to XMR gone silent to begin with and superior to the copy cat special interest ZCash

there are mining calculators=)like whattomine=)
yeah...but on suprnova with 3.5 GHs with diff 1024 - about one hour without any block...crazy people=)
update=)got one=)but with that difficulty - too low profit=(

[PovertyByte]

hey.seen xzc coin now.
any stats?mining calculator?hashrates for 1070/
i have 1.333 Mhash now and only 40% TDP.is it normal?

It's normal and it is good. AMD cards only pull 400 K/h so XZC is free game for NVidia for the meantime

nice=)but difficulty is too high now=(

I do not know how to calculate profitability other than mining for 2 hours and calculating the average for the day

Difficulty comes from the interest in ZCoin to rise probably. It's a real threat to XMR gone silent to begin with and superior to the copy cat special interest ZCash

there are mining calculators=)like whattomine=)
yeah...but on suprnova with 3.5 GHs with diff 1024 - about one hour without any block...crazy people=)
update=)got one=)but with that difficulty - too low profit=(

supposedly most the mining is being controlled by some Chinese mega farms on a private miner getting 4x the hash rate per GPU right now and these miners paid 5 BTC for the miner.

I hope it's not profitable enough to cover that 5 BTC in 2 months time when the algo changes again

[miningpoolhub]

Zcoin Mining Pool Hub

https://zcoin.miningpoolhub.com

Zcoin pool fork compensation credited.
As Zcoin dev sent 400 XZC to us, pool distributed x5 of 20594, 20616 block reward for each accounts.

Thanks.

[miningpoolhub]

It would be great if Decred could be added. It's not my most profitable mining coin but it's what I want to store up.

Besides DCR I have some auto exchange question. I read on the site that auto exchange will credit the coins to the target pool but everyone here is talking about needing a wallet. On the site it says that coins that don't have enough volume for exchange for a certain amount of time may be sent back to me or exchanged as bitcoin. How long does that extend past the 4-6 hour exchange intervals?

One thing I do not quite get. If auto exchange relies on exchanges like Bittrex, Yobit, and Poloniex, than why is the auto exchange even limited to the pools on MPH? At first my impression was that MPH acted as the exchange but if it travels through these other exchanges than I am wondering if auto exchange could be enabled for any given coin outside of MPH.

Yeah DCR is next coin to add.

I had to deal with vcash fork issue, zcoin hardfork, dash update/superblock support, groestlcoin segwit things these days. Some of them are still not completed yet too.
I'll complete things one by one and add DCR.

As exchange sites need at least minimum amount to trade, some cheap coins can't overcome this.
So pool waits next coin to arrive, and exchange them.
I flush stuck coins like 2~6 months interval. Or maybe faster if user requests.

All exchanges are done at poloniex, bittrex, yobit. This is to push up market price and grow trade volume who want their coin to rise.
It's not just getting more profit for them. It's like investment act because it makes real buy order at exchange site.

Exchange can be enabled for any coin outside of mph. I prefer major exchange sites like poloniex and bittrex. Other sites have low trading volume problem.

[miningpoolhub]

hey.seen xzc coin now.
any stats?mining calculator?hashrates for 1070/
i have 1.333 Mhash now and only 40% TDP.is it normal?

It's normal and it is good. AMD cards only pull 400 K/h so XZC is free game for NVidia for the meantime

nice=)but difficulty is too high now=(

I do not know how to calculate profitability other than mining for 2 hours and calculating the average for the day

Difficulty comes from the interest in ZCoin to rise probably. It's a real threat to XMR gone silent to begin with and superior to the copy cat special interest ZCash

there are mining calculators=)like whattomine=)
yeah...but on suprnova with 3.5 GHs with diff 1024 - about one hour without any block...crazy people=)
update=)got one=)but with that difficulty - too low profit=(

Zcoin difficulty fluctuates too much. Too slow change but big which makes unbelievable profit or hash waste.
I hope it to calm down within few days.

[miningpoolhub]

Vcash Mining Pool Hub

https://vcash.miningpoolhub.com

Vcash forked again due to network attack or its own bug.
I also saw that another pool forked.

Currently, I believe it's just wallet's own bug, not from other attacks.
I'll try to deal it with previous no-forking-version 0.4.7 but not sure at this moment.


Thanks.

[PovertyByte]

It would be great if Decred could be added. It's not my most profitable mining coin but it's what I want to store up.

Besides DCR I have some auto exchange question. I read on the site that auto exchange will credit the coins to the target pool but everyone here is talking about needing a wallet. On the site it says that coins that don't have enough volume for exchange for a certain amount of time may be sent back to me or exchanged as bitcoin. How long does that extend past the 4-6 hour exchange intervals?

One thing I do not quite get. If auto exchange relies on exchanges like Bittrex, Yobit, and Poloniex, than why is the auto exchange even limited to the pools on MPH? At first my impression was that MPH acted as the exchange but if it travels through these other exchanges than I am wondering if auto exchange could be enabled for any given coin outside of MPH.

Yeah DCR is next coin to add.

I had to deal with vcash fork issue, zcoin hardfork, dash update/superblock support, groestlcoin segwit things these days. Some of them are still not completed yet too.
I'll complete things one by one and add DCR.

As exchange sites need at least minimum amount to trade, some cheap coins can't overcome this.
So pool waits next coin to arrive, and exchange them.
I flush stuck coins like 2~6 months interval. Or maybe faster if user requests.

All exchanges are done at poloniex, bittrex, yobit. This is to push up market price and grow trade volume who want their coin to rise.
It's not just getting more profit for them. It's like investment act because it makes real buy order at exchange site.

Exchange can be enabled for any coin outside of mph. I prefer major exchange sites like poloniex and bittrex. Other sites have low trading volume problem.

There is no contact page on MPH

I have ZCL being held on exchange waiting to be traded to ZCoin, well actually I disabled auto trade hoping the ZCL would return to me but it is still being held.

I figured I may as well exchange it myself when I see the ideal spread plus seeing how most people are holding ZCoin I assumed it would take too long for that auto exchange anyway

I will be sure to give MPH a plug in the DCR slack to get some hash power over there

[miningpoolhub]

It would be great if Decred could be added. It's not my most profitable mining coin but it's what I want to store up.

Besides DCR I have some auto exchange question. I read on the site that auto exchange will credit the coins to the target pool but everyone here is talking about needing a wallet. On the site it says that coins that don't have enough volume for exchange for a certain amount of time may be sent back to me or exchanged as bitcoin. How long does that extend past the 4-6 hour exchange intervals?

One thing I do not quite get. If auto exchange relies on exchanges like Bittrex, Yobit, and Poloniex, than why is the auto exchange even limited to the pools on MPH? At first my impression was that MPH acted as the exchange but if it travels through these other exchanges than I am wondering if auto exchange could be enabled for any given coin outside of MPH.

Yeah DCR is next coin to add.

I had to deal with vcash fork issue, zcoin hardfork, dash update/superblock support, groestlcoin segwit things these days. Some of them are still not completed yet too.
I'll complete things one by one and add DCR.

As exchange sites need at least minimum amount to trade, some cheap coins can't overcome this.
So pool waits next coin to arrive, and exchange them.
I flush stuck coins like 2~6 months interval. Or maybe faster if user requests.

All exchanges are done at poloniex, bittrex, yobit. This is to push up market price and grow trade volume who want their coin to rise.
It's not just getting more profit for them. It's like investment act because it makes real buy order at exchange site.

Exchange can be enabled for any coin outside of mph. I prefer major exchange sites like poloniex and bittrex. Other sites have low trading volume problem.

There is no contact page on MPH

I have ZCL being held on exchange waiting to be traded to ZCoin, well actually I disabled auto trade hoping the ZCL would return to me but it is still being held.

I figured I may as well exchange it myself when I see the ideal spread plus seeing how most people are holding ZCoin I assumed it would take too long for that auto exchange anyway

I will be sure to give MPH a plug in the DCR slack to get some hash power over there

There's some people mine and exchange to Zcoin currently but these coins didn't meet zcoin withdrawal condition yet.
(There's trade limit and withdrawal limit as well)
As exchange site charges withdrawal fee, pool waits until certain amount to pile up and withdraw them at once.

Thank you for supporting miningpoolhub. I hope I open DCR soon. It is quite different type of coin and needs some work.

Thanks.

[Streetlight9]

Question, How do you Run 1 card out of 2 with the start up bat file?

Looked at most of the posts in here, and cant seem to find the command for it.

[PovertyByte]

Yeah DCR is next coin to add.

I had to deal with vcash fork issue, zcoin hardfork, dash update/superblock support, groestlcoin segwit things these days. Some of them are still not completed yet too.
I'll complete things one by one and add DCR.

As exchange sites need at least minimum amount to trade, some cheap coins can't overcome this.
So pool waits next coin to arrive, and exchange them.
I flush stuck coins like 2~6 months interval. Or maybe faster if user requests.

All exchanges are done at poloniex, bittrex, yobit. This is to push up market price and grow trade volume who want their coin to rise.
It's not just getting more profit for them. It's like investment act because it makes real buy order at exchange site.

Exchange can be enabled for any coin outside of mph. I prefer major exchange sites like poloniex and bittrex. Other sites have low trading volume problem.

There is no contact page on MPH

I have ZCL being held on exchange waiting to be traded to ZCoin, well actually I disabled auto trade hoping the ZCL would return to me but it is still being held.

I figured I may as well exchange it myself when I see the ideal spread plus seeing how most people are holding ZCoin I assumed it would take too long for that auto exchange anyway

I will be sure to give MPH a plug in the DCR slack to get some hash power over there

There's some people mine and exchange to Zcoin currently but these coins didn't meet zcoin withdrawal condition yet.
(There's trade limit and withdrawal limit as well)
As exchange site charges withdrawal fee, pool waits until certain amount to pile up and withdraw them at once.

Thank you for supporting miningpoolhub. I hope I open DCR soon. It is quite different type of coin and needs some work.

Thanks.

I actually received some ZCoin on MPH today so I at least know that it is working with what I mine directly.

I put some things in bold. How would I contact you if I wanted to get my stuck coins returned back to me sooner than the 2~6 months? I do not see anything on the site for contact or support. All I can think of is spotting you on the forum or in slack. Would I just message you the email and username I have regarding stuck coins?

[PovertyByte]

Question, How do you Run 1 card out of 2 with the start up bat file?

Looked at most of the posts in here, and cant seem to find the command for it.

Most miners use "-d" for devices. 0 corresponds to device 1, and 1 corresponds to device 2. If you wanted to mine with GPU 3 and 4 while leaving out GPU 1 and 2 it would look like this "-d 2,3"

One thing I found odd is my main GPU that should be recognized as first was first in the OC software but second in all the miners while the second GPU was first in the miners. You may want to pay attention while setting up

[aaronsace]

I actually received some ZCoin on MPH today so I at least know that it is working with what I mine directly.

I put some things in bold. How would I contact you if I wanted to get my stuck coins returned back to me sooner than the 2~6 months? I do not see anything on the site for contact or support. All I can think of is spotting you on the forum or in slack. Would I just message you the email and username I have regarding stuck coins?

contact@miningpoolhub.com

[celofan]

O.K.
Now i use for monero mining sgminer-gm (the same as in multipoolminer).
https://github.com/genesismining/sgminer-gm/releases
My optimization is --rawintensity 512 --gpu-threads 1 -g 2 -w 4
And for feathercoin mining i use nsgminer https://github.com/ghostlander/nsgminer/releases
My optimiszation is -g 1 -I 13 -w 64 --thread-concurrency 64
For skein i use cgminer (the same as in multipoolminer) ws next optimizations -I 6 -g 2 -w 256
For ethash algo claymore with next string: -allpools 1 -esm 3 -etha 0
For equihash algo claymore also ws -a 2 param.
It is for rx 470 8gb , i think it can be used for all polaris chip based cards/

No more information 

P.S. I have some questions about profitability table for ethash algo. Now multipoolminer uses summary profitability for ethash+sia algo, but for me profitability monero ws profitability ethash+sia the same or monero the best, because i have 5x rx470 8gb undervolted cards, and 650W from the wall summary, but for ethash+sia i have 1kW+ from the wall. It means that for profitability for monero 1.0, ethash 1.0 and sia 0.3 - summary profitability for ethash+sia is 1.3 but electricity +50%, so monero is more profitable for 20% .
Maybe for ethash+sia we must have at some coefficient for correction?
Because multipoolminer will not switch ethash algo when it profitability down.
Sorry for my bad english 

Thank you for sharing; will looking out integrating into the next version.

Regarding the wattage monitoring, it is coming at some point, maybe not the next version but it's coming.
You can tweak it as much as you want though; just put ' * 0.9' etc. in the miner file to decrease the profit by 10%.

Please, can you tell me how i can do it in step-by-step?
What means "in the miner file"? I have'nt any files named "miner".