[ANN][POOL] Mining Pool Hub - Multipool. Multialgo, Auto Exchange to any coin.

[newmz]

helo,

Is it just me , or has anyone else problems with monero block confirmation??
since midday i have 20 - 30 blocks that not be confirmed

here is only the "first" page:

I just saw my confirmed balance go from aproximately 0.7 to approximately 1.25 over about 10 minutes..... what's going on with all the unconfirmed stuff stacking up?

[doktor83]

New Cpuminer binaries for forked Zcoin algo:

https://mega.nz/#!mVY2hZCD!jHlleKrZp4eoZSOn8Idhgw7dIKEfMM_buQwhUsxswZs


New Cpuminer sources for forked Zcoin algo:

https://mega.nz/#!HZIkUSpa!Raf_zNC9Whbsm0jIEChxIS-fyiforGIhfaQx3CIODkU

[br2459]

Can someone help me out with the auto-exchange feature. Is there a how to article somewhere I can reference? I am new to mining pool hub and mining ZCL and I would like to auto-exchange it for either ETH or ZEC but haven't figured out how to set that up. Any help is greatly appreciated.

[aaronsace]

Can someone help me out with the auto-exchange feature. Is there a how to article somewhere I can reference? I am new to mining pool hub and mining ZCL and I would like to auto-exchange it for either ETH or ZEC but haven't figured out how to set that up. Any help is greatly appreciated.

Just set your auto exchange coin then everything that you mine will go to one single currency.

I recommend MultiPoolMiner so that you get the most amount of coins.

[br2459]

Can someone help me out with the auto-exchange feature. Is there a how to article somewhere I can reference? I am new to mining pool hub and mining ZCL and I would like to auto-exchange it for either ETH or ZEC but haven't figured out how to set that up. Any help is greatly appreciated.

Just set your auto exchange coin then everything that you mine will go to one single currency.

Thanks for the reply, but what wallet does it go to, to be exchanged?

[aaronsace]

Thanks for the reply, but what wallet does it go to, to be exchanged?

Set your wallet address for auto withdraw on the pool that you are exchanging everything to.

[br2459]

Thanks for the reply, but what wallet does it go to, to be exchanged?

Set your wallet address for auto withdraw on the pool that you are exchanging everything to.

Ahh ok I think I got it now. So I put my ZEC address in the ZEC mining pool to have my ZCL auto-exchanged to ZEC? Does that sound correct?

[aaronsace]

Thanks for the reply, but what wallet does it go to, to be exchanged?

Set your wallet address for auto withdraw on the pool that you are exchanging everything to.

Ahh ok I think I got it now. So I put my ZEC address in the ZEC mining pool to have my ZCL auto-exchanged to ZEC? Does that sound correct?

Yes. Remember that the wallet address is just for withdrawing; it doesn't control anything.

[br2459]

Thanks for the reply, but what wallet does it go to, to be exchanged?

Set your wallet address for auto withdraw on the pool that you are exchanging everything to.

Ahh ok I think I got it now. So I put my ZEC address in the ZEC mining pool to have my ZCL auto-exchanged to ZEC? Does that sound correct?

Yes, remember that the wallet address is just for withdrawing. It doesn't control anything.

Got it! Thanks for your help!

[induktor]

Hello Miningpoolhub guys
again with problems, i had for two days: ZEC 0.12988492 "on exchange" that it's not getting exchanged.

any ideas why? can you force it, thank you
my user is lightman there.

thanks
indkt.

[aaronsace]

Hello Miningpoolhub guys
again with problems, i had for two days: ZEC 0.12988492 "on exchange" that it's not getting exchanged.

any ideas why? can you force it, thank you
my user is lightman there.

thanks
indkt.

Sounds like there is something wrong with your account. That's enough Zec; it should have exchanged by now. MiningPoolHub will check it for you when he is back on the forum.

[UR-Quan]

Greetings MPH ppl.

1. Didn't use my favorite MPH recently because of LBRY and PASC. Any hope they will be added?

(don't know if it is the right place, maybe should ask the MPOS people, but here goes nothing)
2. The pool-based autoswitching is king. But please make new category including "Ethash, Equihash, Myriad-Groestl, NeoScrypt, Skein, Groestl, Cryptonight, Lyra2RE2, Keccak" for Nvidia - as far as can see theese are the top profit algos.
3. I'd like to autoexchange some coins while stockpiling the others. Can you do distinct settings on site or parse them from password field of connected miner programs?
(next one is probably should go to EWBF's thread, but I think your request will have more weight then mine))
4. For me, EWBF's miner don't disconnect from the pool after it is left with no work regardless of its new "eexit" option.

Thanks in advance!

[newmz]

Greeting Mining Pool Hub,

firstly, thank you for a great service. I have been using MPH for some of its individual pools for a while now, just experimenting initially but lately I have used your monero pool all the time because it is the only one I can find with a pool server close to me with a decent ping time. I live in Australia and use asia1.monero.miningpoolhub.com:20580. Another good thing here is that you allow the claymore client to make an encrypted connection and thus a lower dev fee. So I am very happy with all that stuff.

I have a question though about the various hash-rate measurements available which can sometimes confuse me a bit.

For example, if I look now at my "workers" tab and add all the individual numbers together it totals 7.6 mh/s but if I then open the "dashboard" tab it shows a figure of 6.71 mh/s then changes to 8.03 mh/s.

I just did the same thing after a few minutes and the "workers" totallled to 8.725 mh.s but the dashboard showed still 8.03 mh/s.

Does this mean that the "worker's data is collected more frequently and the "dashboard" is just a longer average? If I add all of the hash-rates reported by the rigs I use it's something like 8.8 mh/s and if I look at the "graphs" that is appromimately where my graph peaks, but it looks like the average is around 8.3 - 8.6 mh/s. So does this mean that my rigs are offering 8.8 mh/s but you are not able to utilize all that hash rate all the time? I know there are random fluctuations all the time but is there any way for me to improve my settings to raise my average up to what my rigs are reporting?

[miningpoolhub]

Hello!  First off, I really like what you've done with this mining website.  I've been mining for about 3 months and I've had great success, and your hard work shows.

Do you have an estimate on when you'll be updating the DASH wallet to 12.1?

Here's a cool page showing who's switched and who hasn't: https://dashpay.atlassian.net/wiki/display/DOC/Mining+pools

I updated it.
Thanks!

[miningpoolhub]

It's gonna be one shitty day for zcash today  crap!, freaking variance!

Sorry

[miningpoolhub]

Hi miningpoolhub guys

I don't see credited blocks 59943 and 60015 , it's already bad enough that it took almost 24 hours to find a block, and after that, it has not been credited, what is going on?

can you please investigate? (username: lightman )
thanks
indkt.

I can see credits for that block at your account.
transaction id 2174026 and 2174868
Seems like pool needed time to calculate because of long block time.

[miningpoolhub]

I just started using this the other day, and I am fairly comfortable with computers in general, I do know some scripting language from playing text based games or writing triggers for zmud.

I have been mining for a few months, at the onset of monero. 

I have a 1050 TI x 5 and +1 970 GTX rig,
1050 TI at work
A RX 470 paired with a 6 core AMD waiting for more units I am ordering and finally a 3960x intel which I am looking for a x79 board to do a hybrid CPU/GPU build maybe even make my own personal computer upgrade / miner.

So not a long time vet, but I am not exactly a noob either.

BUT I do want to say its a bit underwelming to me, the instructions which are supplied in the downloads or on website.  How you configure things with MPH client for example.  sgminer doesnt work at all, ive never used it.. the help file is obnoxious when you load.  I tried in a batch, i na config, at the end of the file, tOK, I saw this setting information that SG miner asks for in the claymore readme files.  OK.  I dont know where it goes it still, a batch file? a command?  How do i Make it execute in conjunction with the miner.   If i make a config file that seems to read it, but what about all the kernel files.   What if I dont want to use that miner and had a different one.  I understand the hub switching but I can use others ports, and pools but then what happens to my currency? Also eth dual mining, no decred info on the website or ability to check balances.  When you say 17xxx do i really leave that, and the rest is magic.. in the copy and paste when do i change usernames and dont I.

Yeah the whole config files and json files are new to me, and I dont get how I have .1 zclassic on exchange, or what that means.  Thats confusing to.   Where  Ifigured I could come for help and guides its all people posting pools and what not, im not trying to read 100 pages of old data!!  The fundamentals of  this system or links to similar systems would be handy.   If nothing else the miner control is nice, I just can only use it for a couple coins.

I also get big red fails on eth dual, its got to be a config issue at this point but that dual mining has a lot to it.. so in time ill figure it out im sure! but hopefully my coins miined go someplace I can use them.  I am using my suprnova account and wallet addie so one can hope.

The struggle is real, but for everyone else it sounds like its pretty good.  Thanks for your work on this, I do like it and once i figure out how to use the miner control interface than maybe ill look at the other stuff!

Thank you

I understand your concerns. I too had hard time at starting mining and forgot about it after I learned.

I will totally make website much easier than this.
I really agree about your suggestion. Thanks.

[miningpoolhub]

Use caution with the VCash pool - it has been mining on its own fork for 2+ days. Miningpoolhub is at VCash block 599895 currently while the rest of the network is at 600754:

https://vcash.miningpoolhub.com/index.php?page=statistics&action=pool

https://explorer.vchain.info/block/0b16579188afdad895bf77f2606808e80836b44c5a403e8ae3af70b31973f93b
https://www.blockexperts.com/xvc/height/600754

Thanks.
Sadly vcash forked accidently.
I will compensate after clearing things up.

[miningpoolhub]

helo,

Is it just me , or has anyone else problems with monero block confirmation??
since midday i have 20 - 30 blocks that not be confirmed

here is only the "first" page:

I just saw my confirmed balance go from aproximately 0.7 to approximately 1.25 over about 10 minutes..... what's going on with all the unconfirmed stuff stacking up?

Just block update script was stuck due to small error.
That is why you saw similar numbers at block confirmation count.

It's resolved now.

[miningpoolhub]

Hello Miningpoolhub guys
again with problems, i had for two days: ZEC 0.12988492 "on exchange" that it's not getting exchanged.

any ideas why? can you force it, thank you
my user is lightman there.

thanks
indkt.

There was some delay at withdrawal process.
I've foudn that it's resolved now.

Sorry for late reply.
I had really hard time these days because of vcash, zcoin fork issue things.