SRBMiner-MULTI AMD & NVIDIA & INTEL & CPU miner

[CoqBurne]

Hi.
Trying to mine DNX on 6x 5700XT for the first time.

Upgraded SRBMiner to 2.3.7 but its always stuck here

[2023-10-11 17:01:46] Job type: SAT
[2023-10-11 17:01:46] Chips needed: 900000000
[2023-10-11 17:01:46] Chips available: 2574
[2023-10-11 17:01:51] Mallob error: [Timeout was reached]
[2023-10-11 17:01:57] Updated capacity with mallob endpoint https://dnx.us.ekapool.com
[2023-10-11 17:01:57] Preparing data, please wait..
[2023-10-11 17:01:58] GPU0 allocating memory for 429 chips
[2023-10-11 17:01:58] GPU0 doing init - please wait
[2023-10-11 17:01:58] GPU0 init...
[2023-10-11 17:02:03] GPU1 allocating memory for 429 chips
[2023-10-11 17:02:03] GPU1 doing init - please wait
[2023-10-11 17:02:03] GPU1 init...
[2023-10-11 17:02:08] GPU2 allocating memory for 429 chips
[2023-10-11 17:02:08] GPU2 doing init - please wait
[2023-10-11 17:02:08] GPU2 init...

If I disable GPU2 then it stops at GPU1 or 3, never gets through initialization.

Whats wrong?

[doktor83]

V2.3.8
+ Added support for NVIDIA 'Volta' architecture - displayed as 'unknown_nvidia' but supported algorithms should work
+ Dynex bug fixes
+ Minor bug fixes

!MANDATORY UPGRADE FOR DYNEX MINING!

To be able to continue mining, users MUST upgrade to this version ( v 2.3.8 ) as soon as possible!
Older versions will stop working in a few days (i don't know the exact date - Dynex team will make that decision).

[ronnieb]

What's more profitable at the moment? Dynex+ dualmining or just dynex stand alone?

I get around 3.1kh per rx 470 right now on just dynex single mining.

[wOvAN]

Dynex+Zil (windows) V2.3.8

Code:

[2023-10-18 05:00:34] Update capacity FAILED [hk.dynex.herominers.com:1119]
[2023-10-18 05:00:35] Update capacity FAILED [https://dnx.eu.ekapool.com]
[2023-10-18 05:00:36] Update capacity FAILED [eu.dnx.minenow.space:8000]
[2023-10-18 05:00:38] Update capacity FAILED [sg.dynex.herominers.com:1119]
[2023-10-18 05:00:38] Update capacity FAILED [mallob.deepminerz.com:9000]
[2023-10-18 05:00:39] Update capacity FAILED [https://dnx.ca.ekapool.com]
[2023-10-18 05:00:40] Update capacity FAILED [au.dynex.herominers.com:1119]
[2023-10-18 05:00:41] Update capacity FAILED [ru.dynex.herominers.com:1119]
[2023-10-18 05:00:42] Update capacity FAILED [https://dnx.eu.ekapool.com]
[2023-10-18 05:00:43] Update capacity FAILED [us2.dynex.herominers.com:1119]
[2023-10-18 05:00:45] Update capacity FAILED [http://mallob-ml.us.neuropool.net/]
[2023-10-18 05:00:47] Update capacity FAILED [https://dnx.sg.ekapool.com]
[2023-10-18 05:00:48] Update capacity FAILED [http://mallob-ml.us.neuropool.net/]
[2023-10-18 05:00:48] Update capacity FAILED [tr.dynex.herominers.com:1119]
[2023-10-18 05:00:49] Update capacity FAILED [ru.dynex.herominers.com:1119]
[2023-10-18 05:00:50] Update capacity FAILED [mallob.deepminerz.com:9001]
[2023-10-18 05:00:50] Update capacity FAILED [au.dynex.herominers.com:1119]
[2023-10-18 05:00:52] Update capacity FAILED [https://dnx.eu.ekapool.com]

only miner restart helps to fix this.

[orekixu]

--max-no-share-sent value

[2023-10-19 17:21:37] GPU0[t0] result accepted [  388ms] [dynex][0]
[2023-10-19 17:21:40] Last valid share sent more than 1 minutes ago! Miner will restart [1]
[2023-10-19 17:21:40] Restarting miner...


this Parameter “--max-no-share-sent” will make SRBMiner always restart  while dualing zil mining，could fix it only work on main algo like DNX

[doktor83]

V2.3.9
+ Fixed invalid shares issue on algorithm 'dynex' [introduced in v2.3.8]
+ Performance improvement on algorithm 'dynex' for some GPU's
+ Reduced devfee for algorithm 'dynex' to 2.0%
+ Added accepted/rejected/compute error stats per GPU in json API->algorithms
+ Minor bug fixes

[doktor83]

--max-no-share-sent value

[2023-10-19 17:21:37] GPU0[t0] result accepted [  388ms] [dynex][0]
[2023-10-19 17:21:40] Last valid share sent more than 1 minutes ago! Miner will restart [1]
[2023-10-19 17:21:40] Restarting miner...


this Parameter “--max-no-share-sent” will make SRBMiner always restart  while dualing zil mining，could fix it only work on main algo like DNX

v239 should fix it 

[shera037]

http://www.anyg.rs/cam/errors.jpg


On RAVEOS dynex mining not working with vega56
error naughty0

aded
export GPU_MAX_HEAP_SIZE=100
export GPU_MAX_USE_SYNC_OBJECTS=1
export GPU_SINGLE_ALLOC_PERCENT=100
export GPU_MAX_ALLOC_PERCENT=100
export GPU_MAX_SINGLE_ALLOC_PERCENT=100
export GPU_ENABLE_LARGE_ALLOCATION=100
export GPU_MAX_WORKGROUP_SIZE=1024

same problem

I need help

[stsocrat]

Detecting GPU devices...
[2023-10-20 12:50:50] Getting UTC time from NTP service
[2023-10-20 12:50:50] Connecting to mallob endpoint [us.dynex.herominers.com:1119]
[2023-10-20 12:50:51] Downloading job file 6abfdd7f707d155da0ecef6242593c19.bin
[2023-10-20 12:51:20] Job file downloaded
[2023-10-20 12:51:20] Loading job file Cache\6abfdd7f707d155da0ecef6242593c19.bin - please be patient, this can take some time..
[2023-10-20 12:51:28] Error loading job file, job expired ?

Restarting miner...

WTF((

Update:
started after 11th try

[FloppyPurpleGherkin]

If you haven't already, please make sure you upgrade your miners to the latest version (OZM 1.2.5 or SRB 2.3.9) to provide the highest quality of PoUW. Note that we start ceasing support for older versions beginning of October 20th, 22:00 UTC

[t4zer]

Can anyone help me out in getting dual mining Dynex + Radiant to work? I haven't been able to properly sort out the config parameters yet (I am using minerstat). Any help would be greatly appreciated, thanks.

What I believe should work is below:

--disable-cpu --algorithm dynex --mallob-endpoint http://mallob-ml.eu.neuropool.net,http://mallob-ml.us.neuropool.net,http://mallob-ml.in.neuropool.net --pool (POOL:DYNEXNEURO)⁣ --wallet (WALLET:DYNEX)⁣ --password (WORKER)⁣⁣ --algorithm sha512_256d_radiant --pool (POOL:RADIANT)⁣ --wallet (WALLET:RADIANT)⁣ --worker (WORKER)

but this ends up only mining Radiant.

[energy_xxx]

Can anyone help me out in getting dual mining Dynex + Radiant to work? I haven't been able to properly sort out the config parameters yet (I am using minerstat). Any help would be greatly appreciated, thanks.

What I believe should work is below:

--disable-cpu --algorithm dynex --mallob-endpoint http://mallob-ml.eu.neuropool.net,http://mallob-ml.us.neuropool.net,http://mallob-ml.in.neuropool.net --pool (POOL:DYNEXNEURO)⁣ --wallet (WALLET:DYNEX)⁣ --password (WORKER)⁣⁣ --algorithm sha512_256d_radiant --pool (POOL:RADIANT)⁣ --wallet (WALLET:RADIANT)⁣ --worker (WORKER)

but this ends up only mining Radiant.

SRBMiner-MULTI.exe --disable-cpu  --algorithm dynex  --pool  DYNEX POOL --wallet DYNEXWALLET --password DYNEXWORKER  --algorithm sha512_256d_radiant  --pool  RADİANTPOOL --wallet RADİANTWALLET.RADİANTWORKER   --zil-enable --zil-pool ZİLPOOL --zil-wallet ZİLWALLET.ZİLWORKER
pause

I added it to zilqiada too, I hope it helps.

srb miner version 2-3-9

[energy_xxx]

This dynex algorithm uses the processor as well, resetting it when the processor is insufficient, and the fact that all cards are the same in this algorithm ensures stable operation. On mixed nvidia and amd rigs, Miner gets stuck, crashes or gives gpu dead error. If possible, it would be beneficial to run separate miners for the same similar cards for those who can.

[t4zer]

Can anyone help me out in getting dual mining Dynex + Radiant to work? I haven't been able to properly sort out the config parameters yet (I am using minerstat). Any help would be greatly appreciated, thanks.

What I believe should work is below:

--disable-cpu --algorithm dynex --mallob-endpoint http://mallob-ml.eu.neuropool.net,http://mallob-ml.us.neuropool.net,http://mallob-ml.in.neuropool.net --pool (POOL:DYNEXNEURO)⁣ --wallet (WALLET:DYNEX)⁣ --password (WORKER)⁣⁣ --algorithm sha512_256d_radiant --pool (POOL:RADIANT)⁣ --wallet (WALLET:RADIANT)⁣ --worker (WORKER)

but this ends up only mining Radiant.

SRBMiner-MULTI.exe --disable-cpu  --algorithm dynex  --pool  DYNEX POOL --wallet DYNEXWALLET --password DYNEXWORKER  --algorithm sha512_256d_radiant  --pool  RADİANTPOOL --wallet RADİANTWALLET.RADİANTWORKER   --zil-enable --zil-pool ZİLPOOL --zil-wallet ZİLWALLET.ZİLWORKER
pause

I added it to zilqiada too, I hope it helps.

srb miner version 2-3-9

Thank you! Much appreciated.

[stsocrat]

Detecting GPU devices...
[2023-10-21 16:50:50] Getting UTC time from NTP service
[2023-10-21 16:50:50] Connecting to mallob endpoint [us.dynex.herominers.com:1119]
[2023-10-21 16:50:51] Downloading job file 6abfdd7f707d155da0ecef6242593c19.bin
[2023-10-21 16:51:20] Job file downloaded
[2023-10-21 16:51:20] Loading job file Cache\6abfdd7f707d155da0ecef6242593c19.bin - please be patient, this can take some time..
[2023-10-21 16:51:28] Error loading job file, job expired ?

Restarting miner...

repeated 200 times...

What's that??

[Sergey2015]

Can anyone help me out in getting dual mining Dynex + Radiant to work? I haven't been able to properly sort out the config parameters yet (I am using minerstat). Any help would be greatly appreciated, thanks.

What I believe should work is below:

--disable-cpu --algorithm dynex --mallob-endpoint http://mallob-ml.eu.neuropool.net,http://mallob-ml.us.neuropool.net,http://mallob-ml.in.neuropool.net --pool (POOL:DYNEXNEURO)⁣ --wallet (WALLET:DYNEX)⁣ --password (WORKER)⁣⁣ --algorithm sha512_256d_radiant --pool (POOL:RADIANT)⁣ --wallet (WALLET:RADIANT)⁣ --worker (WORKER)

but this ends up only mining Radiant.

SRBMiner-MULTI.exe --disable-cpu  --algorithm dynex  --pool  DYNEX POOL --wallet DYNEXWALLET --password DYNEXWORKER  --algorithm sha512_256d_radiant  --pool  RADİANTPOOL --wallet RADİANTWALLET.RADİANTWORKER   --zil-enable --zil-pool ZİLPOOL --zil-wallet ZİLWALLET.ZİLWORKER
pause

I added it to zilqiada too, I hope it helps.

srb miner version 2-3-9

no work
https://imgur.com/a/ibNNDV7

[energy_xxx]

The config is working, no problem, you must have an error somewhere.


By the way, the cards I tested are

amd rx6700 10gb
nvidia 1660 super
nvidia 1660ti
amd rx 6600
amd rx6700xt

It works on all of them, no problem, I just run nvidia cards in separate miner. Same version but different rigs

[bobben2]

Hi doctor83.  I am mining Dynex with my 3080 GPU.
Can I use the API to change GPU clocks on the fly?
I am thinking to write a script to tune the GPU programmatically if I can use API to change clocks on the fly..

[shera037]

http://www.anyg.rs/cam/errors.jpg


On RAVEOS dynex mining not working with vega56
error naughty0

aded
export GPU_MAX_HEAP_SIZE=100
export GPU_MAX_USE_SYNC_OBJECTS=1
export GPU_SINGLE_ALLOC_PERCENT=100
export GPU_MAX_ALLOC_PERCENT=100
export GPU_MAX_SINGLE_ALLOC_PERCENT=100
export GPU_ENABLE_LARGE_ALLOCATION=100
export GPU_MAX_WORKGROUP_SIZE=1024

same problem

I need help

Does anyone have a solution for this problem ??

[doktor83]

http://www.anyg.rs/cam/errors.jpg


On RAVEOS dynex mining not working with vega56
error naughty0

aded
export GPU_MAX_HEAP_SIZE=100
export GPU_MAX_USE_SYNC_OBJECTS=1
export GPU_SINGLE_ALLOC_PERCENT=100
export GPU_MAX_ALLOC_PERCENT=100
export GPU_MAX_SINGLE_ALLOC_PERCENT=100
export GPU_ENABLE_LARGE_ALLOCATION=100
export GPU_MAX_WORKGROUP_SIZE=1024

same problem

I need help

Does anyone have a solution for this problem ??

unset LD_LIBRARY_PATH