SRBMiner-MULTI AMD & NVIDIA & INTEL & CPU miner

[energy_xxx]

Doctor, you need to overhaul the CPU miners. The algorithm that gets 100 hashes with SRB on the same hardware gives 250-300 hashes with another miner. There is only one CPU in the Ghostrider algorithm. Why don't you add a GPU? We love SRB.

[doktor83]

V2.4.5
+ Minor performance improvement on algorithm 'karlsenhash' for AMD RDNA2 GPU's
+ Minor performance improvement on algorithm 'sha3d'
+ OC parameters (NVIDIA) should now work as expected on both WINDOWS and LINUX
+ Fixed issue with lower poolside hashrate on algorithm 'blake3_alephium' introduced in previous version
+ Fixed an issue that caused higher difficulty to be used than what the pool sent - on some algorithms, introduced in previous version
+ Removed algorithms : blake2b, blake2s, yespowerlitb, yespoweriots, yespoweritc, yespowerres, yespowerarwn, cryptonight_talleo, cryptonight_ccx, randomhash2, scryptn2, k12, keccak, dynamo, minotaur, kaspa

[Spill]

Can you guys add octopus ?

[PoorGang]

Iam sorry, but i have a question.

On my linux, i can see hash rate like

3776.12 H/s etc on minotaurx when iam mining some coin, but on pool side, i see my rate like 2 h/s or 4..
How it is possible?

[catalin7504]

V2.4.5
+ Minor performance improvement on algorithm 'karlsenhash' for AMD RDNA2 GPU's
+ Minor performance improvement on algorithm 'sha3d'
+ OC parameters (NVIDIA) should now work as expected on both WINDOWS and LINUX
+ Fixed issue with lower poolside hashrate on algorithm 'blake3_alephium' introduced in previous version
+ Fixed an issue that caused higher difficulty to be used than what the pool sent - on some algorithms, introduced in previous version
+ Removed algorithms : blake2b, blake2s, yespowerlitb, yespoweriots, yespoweritc, yespowerres, yespowerarwn, cryptonight_talleo, cryptonight_ccx, randomhash2, scryptn2, k12, keccak, dynamo, minotaur, kaspa

Does this version support 2 CPUs? I have a 2 x Xeon 2699v4, each CPU 22 cores/44 threads, and even using the --cpu-affinity only the first CPU is being used. Maybe I'm doing something wrong, but I set the --cpu-threads 44 --cpu-affinity 0x555555555555555555555

[doktor83]

V2.4.6
+ Added algorithm 'aurum' (BitNet) for CPU mining, fee 2.00%
+ Minor performance improvement on algorithm 'blake3_alephium'
+ Added support for algorithm 'cryptonight_turtle' on AMD gfx1100
+ Added Vega56/64 rocm binary for algorithm 'cryptonight_turtle'
+ Minor bug fixes

[BoozyTalking]

V2.4.6 aurum algo, miner gives low hashrate on N100-N300 intel CPUs (avx2+sha+vaes), about twice lower then official miner.

[drunkshihtzu2]

etc and aleph is broken in newest version
etc shares not credited. aleph works.

copied exact file from previous version.
please fix

[doktor83]

etc and aleph is broken in newest version
etc shares not credited. aleph works.

copied exact file from previous version.
please fix

Tested both on herominers pool and its ok.
So please provide more information.

[drunkshihtzu2]

its not working when logged in to different mining sites
the herominer works but for etc the 2miners isnt working.

i copied the exact bat file and not working.  the previous version works.
could be on my end. im not perfect.   any suggestions?

[BoozyTalking]

its not working when logged in to different mining sites
the herominer works but for etc the 2miners isnt working.

i copied the exact bat file and not working.  the previous version works.
could be on my end. im not perfect.   any suggestions?

Try some previous version, this mining software have many bugs for very long time without fixing.
Try different versions - some algo combinations for dual mining may be broken in different versions.

[doktor83]

its not working when logged in to different mining sites
the herominer works but for etc the 2miners isnt working.

i copied the exact bat file and not working.  the previous version works.
could be on my end. im not perfect.   any suggestions?

Try some previous version, this mining software have many bugs for very long time without fixing.
Try different versions - some algo combinations for dual mining may be broken in different versions.

You could be kind enough and write down here those bugs ?

its not working when logged in to different mining sites
the herominer works but for etc the 2miners isnt working.

i copied the exact bat file and not working.  the previous version works.
could be on my end. im not perfect.   any suggestions?

Try add --esm 2

edit: tried --esm 2 and 2miners etc with latest version, found shares were registered on poolside. So its working as it should.

[BoozyTalking]

Try some previous version, this mining software have many bugs for very long time without fixing.
Try different versions - some algo combinations for dual mining may be broken in different versions.

You could be kind enough and write down here those bugs ?

--multi-algorithm-job-mode 3 - broken (at least for nvidia) at least from version 2.3.7.
Latest few versions - MinotaurX broken, yespowerltncg - broken, yespower and some other cpu algo - something wrong when working with intel cpu's, especially with E Xeon's v3 v4 versions and N100-N300 cpu's - miner show good hashrate, but too low numbers of found shares, for example: yespower, Xeon E2650 V4 - hashrate ~ 1300h/s, on pool hashrate - 130 h/s.

[doktor83]

Try some previous version, this mining software have many bugs for very long time without fixing.
Try different versions - some algo combinations for dual mining may be broken in different versions.

You could be kind enough and write down here those bugs ?

--multi-algorithm-job-mode 3 - broken (at least for nvidia) at least from version 2.3.7.
Latest few versions - MinotaurX broken, yespowerltncg - broken, yespower and some other cpu algo - something wrong when working with intel cpu's, especially with E Xeon's v3 v4 versions and N100-N300 cpu's - miner show good hashrate, but too low numbers of found shares, for example: yespower, Xeon E2650 V4 - hashrate ~ 1300h/s, on pool hashrate - 130 h/s.

--multi-algorithm-job-mode 3 is not broken, also its not a gpu dependent thing. Write down the example that's not working for you, then i might be able to test.

Im aware of some yespower derivates broken - broke in last version - not for very long time as you wrote.
Also the miner vs pool hr on some algorithms fixed in v2.4.5 - it is in the release notes.

Code:

+ Fixed an issue that caused higher difficulty to be used than what the pool sent - on some algorithms, introduced in previous version

[BoozyTalking]

SRBMiner-MULTI.exe --disable-cpu --multi-algoithm-job-mode 3 --gpu-intensity 22;22 --algorithm progpow_epic;evrprogpow --pool de.epicmine.io:3333;stratum-eu.rplant.xyz:7073 --wallet *******;******** --password *****;*******

Nvidia Asus RTX3060Ti, miner mine two algos at same time so hashrate split between algos.

[BoozyTalking]

YespowerMgpc also broken in latest version.

[doktor83]

--multi-algoithm-job-mode 3

cared to fix that ?

[BoozyTalking]

--multi-algoithm-job-mode 3

cared to fix that ?

Same with CPU. RandomEpic+Yespower (Ryzen 2700 Pro):
https://i.imgur.com/SFMSEDR.jpeg

Maybe not broken, but definitely not work correct with epicmine.io pool.

[doktor83]

--multi-algoithm-job-mode 3

cared to fix that ?

Same with CPU. RandomEpic+Yespower (Ryzen 2700 Pro):
https://i.imgur.com/SFMSEDR.jpeg

Maybe not broken, but definitely not work correct with epicmine.io pool.

Insane. Did you actually cared to fix the TYPO you have ?

Code:

--multi-algoithm-job-mode 3

vs fixed:

Code:

--multi-algorithm-job-mode 3

[BoozyTalking]

Insane. Did you actually cared to fix the TYPO you have ?

Code:

--multi-algoithm-job-mode 3

vs fixed:

Code:

--multi-algorithm-job-mode 3

[/quote]

If so, then why the fuck miner didn't show any warnings about wrong parameter?