Biodom
Legendary
Offline
Activity: 3920
Merit: 4386
|
|
October 05, 2014, 05:51:13 AM |
|
main point i asked how many bitcoins this machine SP35 that looks to have 6000 ghs can mine monthly......
Probably a lot less than it costs you Mining is a dead game, you won't ROI with such pre-orders that take 2 months and difficulty rising the way it is. Just bummed the price of bitcoin/USD is dropping by the day. Need to get hardware free to make money. im looking for USED sp30 ..$300 per TH shoot me pm is this a comic relief act?
|
|
|
|
Master One
Full Member
Offline
Activity: 238
Merit: 100
Wanna buy a Tesla? Visit TeslaBargain.com first!
|
|
October 05, 2014, 05:52:52 AM |
|
Just bummed the price of bitcoin/USD is dropping by the day. Need to get hardware free to make money. Need to get hardware AND energy for free!
|
|
|
|
bobsmoke
|
|
October 05, 2014, 10:08:18 AM |
|
Hello, oOne of my miners performance decreased a bit (~10%) .. I checked the ASIC Events and it looks like there is an issue with the bottom board. Loop9 OFF.
I already rebooted the miner and restarted the miner gate couple of times ... anyone saw this before?
----BOTTOM BOARD------ PSU-BOT[EMERSON1200]: 1392->1280w[1280 1264 1260] (lim=1335) 0c cooling:0/0x2000
LOOP[9] OFF (no data on loop) 27: disabled (i2c good) 28: disabled (i2c good) 29: disabled (i2c good)
[H:HW:3868Gh[2114+1754],W:1810,L:0,A:27,MMtmp:0 TMP:(20)=>=>=>(63,44)]
thx
|
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
|
October 05, 2014, 10:15:09 AM |
|
Hello, oOne of my miners performance decreased a bit (~10%) .. I checked the ASIC Events and it looks like there is an issue with the bottom board. Loop9 OFF.
I already rebooted the miner and restarted the miner gate couple of times ... anyone saw this before?
----BOTTOM BOARD------ PSU-BOT[EMERSON1200]: 1392->1280w[1280 1264 1260] (lim=1335) 0c cooling:0/0x2000
LOOP[9] OFF (no data on loop) 27: disabled (i2c good) 28: disabled (i2c good) 29: disabled (i2c good)
[H:HW:3868Gh[2114+1754],W:1810,L:0,A:27,MMtmp:0 TMP:(20)=>=>=>(63,44)]
thx
I got the same on one miner. What have I done is set both PSUs to 1340W (on 220V+) so they can re-optimize. You should get ~4200 from that miner.
|
|
|
|
bobsmoke
|
|
October 05, 2014, 10:22:23 AM Last edit: October 05, 2014, 10:52:23 AM by bobsmoke |
|
Hello, oOne of my miners performance decreased a bit (~10%) .. I checked the ASIC Events and it looks like there is an issue with the bottom board. Loop9 OFF.
I already rebooted the miner and restarted the miner gate couple of times ... anyone saw this before?
----BOTTOM BOARD------ PSU-BOT[EMERSON1200]: 1392->1280w[1280 1264 1260] (lim=1335) 0c cooling:0/0x2000
LOOP[9] OFF (no data on loop) 27: disabled (i2c good) 28: disabled (i2c good) 29: disabled (i2c good)
[H:HW:3868Gh[2114+1754],W:1810,L:0,A:27,MMtmp:0 TMP:(20)=>=>=>(63,44)]
thx
I got the same on one miner. What have I done is set both PSUs to 1340W (on 220V+) so they can re-optimize. You should get ~4200 from that miner. Ok, thank you Roadstress - will try. The miner is currently at 4200 Ghs without changing settings and with the Loop9 OFF ..... Before that do you or anyone knows where to find the SP firmware versions for manual upgrade? update: Upgrade to 2.3.46 fixed the issue.
|
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
|
October 05, 2014, 11:02:44 AM |
|
update: Upgrade to 2.3.46 fixed the issue.
Happy New Year!
|
|
|
|
wh00per
|
|
October 05, 2014, 11:58:45 AM |
|
update: Upgrade to 2.3.46 fixed the issue.
Happy New Year! So does a couple of minergate resets, temporary Loop 9 looks the toughest to please .. When the unit is starting to mine, minergate modifies the asic frequencies to bump the hashrate up .. it starts from loop 1 and ends with loop 9 .. sometimes I feel like loop 9 is not started because everything else is running above parameters. With loop 9 off, the other loops try to compensate the missing hashrate and they're overclocked. http://powerprice.info/SPT/graphic.php << see the "loop 9 issue" when the bottom board exhaust temperature is 56 deg C or so. With 2.3.46 fixing the issue means this problem with loop 9 does not appear at all?
|
CSA/cUL Certified Power Distribution Panels - Basic, Switched, Metered. 1-3 phases. Up to 600V. NMC:N4F9qvHz11BHcc4nh1LCJFsrZhA1EWgVwj
|
|
|
bobsmoke
|
|
October 05, 2014, 12:25:29 PM |
|
update: Upgrade to 2.3.46 fixed the issue.
Happy New Year! So does a couple of minergate resets, temporary Loop 9 looks the toughest to please .. When the unit is starting to mine, minergate modifies the asic frequencies to bump the hashrate up .. it starts from loop 1 and ends with loop 9 .. sometimes I feel like loop 9 is not started because everything else is running above parameters. With loop 9 off, the other loops try to compensate the missing hashrate and they're overclocked. http://powerprice.info/SPT/graphic.php << see the "loop 9 issue" when the bottom board exhaust temperature is 56 deg C or so. With 2.3.46 fixing the issue means this problem with loop 9 does not appear at all? I never had this Loop 9 issue until yesterday .. what I noticed was the hashrate decreasing slowly to the ~4.2~ and I needed to manual restarted minergate to bump it up again to the ~4.5 range. Now the 2.4.15 FW release notes states it fixes this problem. Also Zvi told me to upgrade to the last version of the FW ... so I will upgrade to 2.4.18 as soon as I have remote hands in case a power off is needed. On the other hand I have a SP30 running with FW 2.3.43 running at ~4950 since day 1 like a Swiss watch!
|
|
|
|
BitcoinPappi
Legendary
Offline
Activity: 915
Merit: 1005
|
|
October 05, 2014, 01:01:07 PM Last edit: October 05, 2014, 01:19:48 PM by BitcoinPappi |
|
Received a miner on Friday that was preordered. However it has not run at above 2 TH. I thought it was just doing its calibration thing but upon further investigation the miner appears to not be functional. Any advice on getting this fixed ? 3: DC2DC/1/:[vlt1:599 vlt2:600(DCl:794 Tl:600 Ul:749) 24W 40A 251c] ASIC:[ 85c* 350hz(BL: 550) 7 (E:193) F:0] 4: DC2DC/1/:[vlt1:597 vlt2:600(DCl:794 Tl:600 Ul:749) 24W 41A 254c] ASIC:[ 85c* 350hz(BL: 605) 5 (E:193) F:0] 5: DC2DC/1/:[vlt1:601 vlt2:600(DCl:794 Tl:600 Ul:749) 24W 41A 254c] ASIC:[ 85c* 350hz(BL: 600) 9 (E:193) F:0] LOOP[2] ON 6: DC2DC/1/:[vlt1:599 vlt2:600(DCl:794 Tl:600 Ul:749) 25W 41A 253c] ASIC:[ 85c* 350hz(BL: 590) 5 (E:193) F:0] 7: DC2DC/1/:[vlt1:597 vlt2:600(DCl:794 Tl:600 Ul:749) 25W 41A 255c] ASIC:[ 85c* 350hz(BL: 500) 6 (E:193) F:0] 8: DC2DC/1/:[vlt1:601 vlt2:600(DCl:794 Tl:600 Ul:749) 25W 41A 252c] ASIC:[ 85c* 350hz(BL:1045) 4 (E:171) F:0] LOOP[3] ON 9: DC2DC/1/:[vlt1:601 vlt2:600(DCl:794 Tl:600 Ul:749) 25W 41A 254c] ASIC:[ 85c* 350hz(BL: 545) 4 (E:193) F:0] 10: DC2DC/1/:[vlt1:599 vlt2:600(DCl:794 Tl:600 Ul:749) 25W 41A 255c] ASIC:[ 85c* 350hz(BL: 575) 8 (E:193) F:0] 11: DC2DC/1/:[vlt1:605 vlt2:602(DCl:794 Tl:602 Ul:749) 25W 42A 254c] ASIC:[ 85c* 350hz(BL: 625) 5 (E:191) F:0] LOOP[4] ON 12: DC2DC/1/:[vlt1:666 vlt2:672(DCl:794 Tl:794 Ul:749) 53W 79A 9c] ASIC:[ 85c 615hz(BL: 615) 10 (E:193) F:0] 13: DC2DC/1/:[vlt1:666 vlt2:672(DCl:794 Tl:794 Ul:749) 54W 80A 10c] ASIC:[ 85c 630hz(BL: 630) 15 (E:193) F:0] 14: DC2DC/1/:[vlt1:599 vlt2:600(DCl:794 Tl:600 Ul:749) 25W 42A 254c] ASIC:[ 85c* 350hz(BL: 595) 5 (E:193) F:0] LOOP[5] OFF (test serial failed) 15: disabled (i2c BAD, btw!) 16: disabled (i2c BAD, btw!) 17: disabled (i2c BAD, btw!) LOOP[6] OFF (test serial failed) 18: disabled (i2c BAD, btw!) 19: disabled (i2c BAD, btw!) 20: disabled (i2c BAD, btw!) LOOP[7] OFF (test serial failed) 21: disabled (i2c BAD, btw!) 22: disabled (i2c BAD, btw!) 23: disabled (i2c BAD, btw!) LOOP[8] OFF (test serial failed) 24: disabled (i2c BAD, btw!) 25: disabled (i2c BAD, btw!) 26: disabled (i2c BAD, btw!) LOOP[9] OFF (test serial failed) 27: disabled (i2c BAD, btw!) 28: disabled (i2c BAD, btw!) 29: disabled (i2c BAD, btw!)
[H:HW:1118Gh,W:432,L:0,A:15,MMtmp:0 TMP:(14)=>=>=>(23,0)] Pushed 27 jobs , in HW queue 4 jobs (sw:3, hw:3)! min:30 wins:103[this/last min:98/5] bist-fail:36, hw-err:
|
|
|
|
bobsmoke
|
|
October 05, 2014, 01:09:16 PM |
|
Recieved a miner on Friday that was preordered. However it has not run at above 2 TH. I thought it was just doing its calibration thing but upon further investigation the miner appears to not be functional. Any advice on getting this fixed ?
Did you already emailed SP support? they are usually pretty fast!
|
|
|
|
BitcoinPappi
Legendary
Offline
Activity: 915
Merit: 1005
|
|
October 05, 2014, 01:15:01 PM |
|
Recieved a miner on Friday that was preordered. However it has not run at above 2 TH. I thought it was just doing its calibration thing but upon further investigation the miner appears to not be functional. Any advice on getting this fixed ?
Did you already emailed SP support? they are usually pretty fast! What is their support email ? Is it info@spondoolies-tech.com . Nothing on the contact us page http://www.spondoolies-tech.com/pages/contact-us*sent an email to info@spondoolies-tech.com
|
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
|
October 05, 2014, 01:20:17 PM |
|
Recieved a miner on Friday that was preordered. However it has not run at above 2 TH. I thought it was just doing its calibration thing but upon further investigation the miner appears to not be functional. Any advice on getting this fixed ?
Did you already emailed SP support? they are usually pretty fast! What is their support email ? Is it info@spondoolies-tech.com . Nothing on the contact us page http://www.spondoolies-tech.com/pages/contact-usIt's support@ It seems that you have a dead PSU. Tried swapping it out and pressing it back in?
|
|
|
|
ukzerosniper
Newbie
Offline
Activity: 43
Merit: 0
|
|
October 05, 2014, 01:24:41 PM |
|
Hi Guys,
Is it possible in a firmware update to produce the ability to monitor the miners via SNMP?
This way I could fire up a Cacti instance and graph data in single location for all the miners.
Thanks.
|
|
|
|
zvisha
|
|
October 05, 2014, 02:29:01 PM |
|
Recieved a miner on Friday that was preordered. However it has not run at above 2 TH. I thought it was just doing its calibration thing but upon further investigation the miner appears to not be functional. Any advice on getting this fixed ?
Did you already emailed SP support? they are usually pretty fast! What is their support email ? Is it info@spondoolies-tech.com . Nothing on the contact us page http://www.spondoolies-tech.com/pages/contact-usIt's support@ It seems that you have a dead PSU. Tried swapping it out and pressing it back in? The Murata PSUs do not manage to recover from OC. Please update to latest version (2.4.20) and do full 30 second long power cycle.
|
|
|
|
ukzerosniper
Newbie
Offline
Activity: 43
Merit: 0
|
|
October 05, 2014, 02:40:40 PM |
|
Recieved a miner on Friday that was preordered. However it has not run at above 2 TH. I thought it was just doing its calibration thing but upon further investigation the miner appears to not be functional. Any advice on getting this fixed ?
Did you already emailed SP support? they are usually pretty fast! What is their support email ? Is it info@spondoolies-tech.com . Nothing on the contact us page http://www.spondoolies-tech.com/pages/contact-usIt's support@ It seems that you have a dead PSU. Tried swapping it out and pressing it back in? The Murata PSUs do not manage to recover from OC. Please update to latest version (2.4.20) and do full 30 second long power cycle. Also check the fuses in your plugs. When I first got mine I used cables which had been used on Antminer S3 and CoinTerra Miners. They only had 5A fuses and blew within the first 2hours. As stated above, update to latest firmware then power cycle the miner. You may also want to confirm the max PSU is set to 1300w or lower under Settings > MAX PSU Top and MAX PSU Bottom. This will not effect the performance of the miner but will facilitate the miner working when it hits over current. Hope that helps.
|
|
|
|
dogjunior
|
|
October 05, 2014, 04:52:31 PM |
|
This is a beautiful and proper built miner! Indeed, it's beautiful well built professional grade hardware, if only the price... Beautiful well built hardware is great but it does no good if btc price keeps falling and difficulty keeps going up. How good is a miner if BTC goes sub $100 and it costs more to power the thing than it earns.
|
|
|
|
coinits
Legendary
Offline
Activity: 1582
Merit: 1019
011110000110110101110010
|
|
October 05, 2014, 04:54:56 PM |
|
This is a beautiful and proper built miner! Indeed, it's beautiful well built professional grade hardware, if only the price... Beautiful well built hardware is great but it does no good if btc price keeps falling and difficulty keeps going up. How good is a miner if BTC goes sub $100 and it costs more to power the thing than it earns. Miners need to shut down but as long as people speculate that BTC will rise in the future they will continue to mine at a loss today.
|
Jump you fuckers! | The thing about smart motherfuckers is they sound like crazy motherfuckers to dumb motherfuckers. | My sig space for rent for 0.01 btc per week.
|
|
|
BitcoinPappi
Legendary
Offline
Activity: 915
Merit: 1005
|
|
October 05, 2014, 05:09:06 PM |
|
Recieved a miner on Friday that was preordered. However it has not run at above 2 TH. I thought it was just doing its calibration thing but upon further investigation the miner appears to not be functional. Any advice on getting this fixed ?
Did you already emailed SP support? they are usually pretty fast! What is their support email ? Is it info@spondoolies-tech.com . Nothing on the contact us page http://www.spondoolies-tech.com/pages/contact-usIt's support@ It seems that you have a dead PSU. Tried swapping it out and pressing it back in? The Murata PSUs do not manage to recover from OC. Please update to latest version (2.4.20) and do full 30 second long power cycle. Thanks. Waiting to have the machines power cycled
|
|
|
|
BitcoinPappi
Legendary
Offline
Activity: 915
Merit: 1005
|
|
October 05, 2014, 06:41:54 PM |
|
SP-Tech support is world class not only in the Bitcoin industry but technical support in general - Upgraded to the latest firmware
- Made the change in their technical blog as advised echo 1 > /etc/mg_dc2dc_temp_ignore)
- Now hashing away
- Offered to ssh into the machine
You cannot ask for better server . Hopefully they don't tease us with all these nice customer services then turn into BFL and KNC
|
|
|
|
bobsmoke
|
|
October 05, 2014, 06:47:41 PM |
|
SP-Tech support is world class not only in the Bitcoin industry but technical support in general - Upgraded to the latest firmware
- Made the change in their technical blog as advised echo 1 > /etc/mg_dc2dc_temp_ignore)
- Now hashing away
- Offered to ssh into the machine
You cannot ask for better server . Hopefully they don't tease us with all these nice customer services then turn into BFL and KNC I agree they have been very helpful ... meanwhile got the Loop9 problem again - Just upgraded to 2.4.40 and noticed the fans were set to 70% and some of the ASICS were at 115c .. configured the Fans back to 80%, restarted miner gate and had the issue you earlier described. I just reboot the machine and is hashing away.
|
|
|
|
|