Taugeran
|
|
December 26, 2014, 04:53:49 AM |
|
Been kinda curious: is there a datasheet available on the rockerbox ASIC With details on pinout, protocol etc?
I'm a habitual tinkerer and enjoy hobbyist level electronics tinkering. On occasion I'll set myself a challenge, most recently it was to design as simplistic as possible single board computer around the atmel sama5d4 series mpu (not quite hobbyist level, and still working on it)
Well curiosity has me desiring to, if possible and permissible by spond-tech, design a board for the rockerbox.
And yes I know I may get people asking why when it won't roi, or saying it's been done already( technobit RB DICE)
I'm asking because I want to better my skill set and deepen my knowledge of electronics design, nothing more.
|
Bitfury HW & Habañero : 1.625Th/s tips/Donations: 1NoS89H3Mr6U5CmP4VwWzU2318JEMxHL1 Come join Coinbase
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
December 26, 2014, 05:15:19 AM |
|
Been kinda curious: is there a datasheet available on the rockerbox ASIC With details on pinout, protocol etc?
I'm a habitual tinkerer and enjoy hobbyist level electronics tinkering. On occasion I'll set myself a challenge, most recently it was to design as simplistic as possible single board computer around the atmel sama5d4 series mpu (not quite hobbyist level, and still working on it)
Well curiosity has me desiring to, if possible and permissible by spond-tech, design a board for the rockerbox.
And yes I know I may get people asking why when it won't roi, or saying it's been done already( technobit RB DICE)
I'm asking because I want to better my skill set and deepen my knowledge of electronics design, nothing more.
Contact support@ and we'll release the DS after signing an NDA. We won't be able to support your project.
|
|
|
|
luki19994
Member
Offline
Activity: 99
Merit: 10
|
|
December 26, 2014, 10:13:12 AM |
|
what ? Order no 4671 my name : Ivo Kuhn payed for 3 months , before you need 13 days to get my unit working ( i can proof ) and then you write my unit was offline because not paying ??
minersource hosting : i start a new topic 2 months before ( minersource hosting )
whats wrong with you ?
ah i write an mail whats wrong why is not hashing i only recieve a ticket from minersource on 23.12 then a day later unit works no email answer nothing really bad service from minersource
|
|
|
|
raskul
|
|
December 26, 2014, 10:15:09 AM |
|
-snip- really bad service from minersource
I understand your frustration but this thread is not for minersource. Do they not have their own thread?
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
luki19994
Member
Offline
Activity: 99
Merit: 10
|
|
December 26, 2014, 10:20:52 AM |
|
i know , so i started a new topic , 2 months before but when minersource replay here i have to answer my post whas about sp 31 and about how is hashing and that is really good
|
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
|
December 26, 2014, 11:01:30 AM |
|
-snip- really bad service from minersource
I understand your frustration but this thread is not for minersource. Do they not have their own thread? raskul- Would you read it again?http://www.spondoolies-tech.com/pages/hostingpThanks spondoolies recommendation he's got in this minersource shit .
|
|
|
|
luki19994
Member
Offline
Activity: 99
Merit: 10
|
|
December 26, 2014, 11:21:15 AM |
|
thanks i only choose because spondoolies recomend it ! but my sp31 is running so i´m okay
|
|
|
|
luki19994
Member
Offline
Activity: 99
Merit: 10
|
|
December 26, 2014, 11:33:47 AM |
|
raskul i like you i think about to host my unit by my self someone(barbara from sp) advise me to host it by spondoolies tech , when there should be a problem what to do ?
|
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
|
December 26, 2014, 11:35:06 AM |
|
minersource shit .
what's wrong Tupsu? didn't get that barbie doll you wanted for xmas? The correlation you make is like - you complaining about the saleroom where you bought a car, to the place you put petrol in it. there is no correlation whatsoever. If this "car" is advertised here for more than 15 spams tread, then yes, if the car dealer advertises the wrong fuel. And my grandchildren could not barbie doll for xmas, They both got me LEGO Friends series Sunshine Ranch 41039
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
|
December 26, 2014, 02:42:04 PM |
|
I'll appreciate a bit of holiday spirit.
|
|
|
|
ASICSPACE
Full Member
Offline
Activity: 121
Merit: 100
Feel free to contact me via email, skype or phone!
|
|
December 26, 2014, 02:47:21 PM Last edit: December 26, 2014, 03:58:47 PM by ASICSPACE |
|
minersource shit .
what's wrong Tupsu? didn't get that barbie doll you wanted for xmas? The correlation you make is like - you complaining about the saleroom where you bought a car, to the place you put petrol in it. there is no correlation whatsoever. Are you fcking retard? Of course there is a correlation if the damn dealership recommend the wrong petrol. Dumbfck. stop kissing asses already If minersource is letting you down, then you should check us out. We have very competitive rates, as low as $80/kw/month. See our website http://www.asicspace.com/
|
|
|
|
ElGabo
|
|
December 26, 2014, 03:19:03 PM |
|
|
" I'm waiting for my punishment, I know it's on my way So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
thomas_s
|
|
December 26, 2014, 04:04:49 PM |
|
what ? payed for 3 months , before you need 13 days to get my unit working ( i can proof ) and then you write my unit was offline because not paying ??
minersource hosting : i start a new topic 2 months before ( minersource hosting )
whats wrong with you ?
ah i write an mail whats wrong why is not hashing i only recieve a ticket from minersource on 23.12 then a day later unit works no email answer nothing really bad service from minersource
Please send another ticket, yours wasn't taken down for non payment. BTW so everyone stops saying why "service was bad", the wrong worker details were provided and no notification till November 14th that it was wrong we as well provided a screen shot of the unit up and running at speed (however the wrong worker details were in). Again please submit a ticket.
|
|
|
|
wpgdeez
|
|
December 26, 2014, 04:05:02 PM |
|
I'll appreciate a bit of holiday spirit.
Merry Christmas SP-Tech, may Jesus bless you and your family. Such a wonderful time of year.
|
|
|
|
wpgdeez
|
|
December 26, 2014, 04:06:15 PM |
|
what ? Order no 4671 my name : Ivo Kuhn payed for 3 months , before you need 13 days to get my unit working ( i can proof ) and then you write my unit was offline because not paying ??
minersource hosting : i start a new topic 2 months before ( minersource hosting )
whats wrong with you ?
ah i write an mail whats wrong why is not hashing i only recieve a ticket from minersource on 23.12 then a day later unit works no email answer nothing really bad service from minersource
Please send another ticket, yours wasn't taken down for non payment. BTW so everyone stops saying why "service was bad", the wrong worker details were provided and no notification till November 14th that it was wrong we as well provided a screen shot of the unit up and running at speed (however the wrong worker details were in). Again please submit a ticket. Why are you airing other peoples private and personal information? I know here in Canada it is a crime, you should be more professional.
|
|
|
|
thomas_s
|
|
December 26, 2014, 04:08:43 PM |
|
what ?
minersource hosting : i start a new topic 2 months before ( minersource hosting )
whats wrong with you ?
ah i write an mail whats wrong why is not hashing i only recieve a ticket from minersource on 23.12 then a day later unit works no email answer nothing really bad service from minersource
Please send another ticket, yours wasn't taken down for non payment. BTW so everyone stops saying why "service was bad", the wrong worker details were provided and no notification till November 14th that it was wrong we as well provided a screen shot of the unit up and running at speed (however the wrong worker details were in). Again please submit a ticket. Why are you airing other peoples private and personal information? I know here in Canada it is a crime, you should be more professional. I never did, I requested a ticket be submitted, and there is nothing personal about not providing the wrong worker details to stop the complaint of why it was down for 13 days. All the personal information was not provided by me and the order# is not the correct order# from our site. I'm not making another post in regards to this. The only way anything will get resolved is in a ticket.
|
|
|
|
edonkey
Legendary
Offline
Activity: 1150
Merit: 1004
|
|
December 26, 2014, 05:06:16 PM |
|
My SP20 went non-responding yesterday after I added a couple of pools. The web admin GUI never came back after submitting the change, and I could not ssh into the device. It responded to pings, but that was it.
I power cycled the unit and attempted further edits to the pool list. It seemed to work for a little while, then the SP20 hung again.
Operating on a guess that maybe I had specified too many pools, I rebooted again so that I could remove some. Once I saw pings responding, I quickly fired up the web admin GUI and stopped the miner. This allowed me to get back to the pool list and remove a few. Since doing that, the SP20 has run reliably again.
Is there a known problem with too many pools? I had 9 pools specified at the time that the machine went non-responding. I know that's a stupid large number of pools, but I've just been moving disused pools to the bottom of the list with the thinking that if I needed them again, I could just change the order.
If the miner craps out after too many pools are defined, then the UI should probably limit the number that you can specify.
Note that this was with the v2.5.52 firmware.
|
Was I helpful? BTC: 3G1Ubof5u8K9iJkM8We2f3amYZgGVdvpHr
|
|
|
crushed
Member
Offline
Activity: 103
Merit: 11
|
|
December 26, 2014, 06:04:12 PM |
|
My SP20 went non-responding yesterday after I added a couple of pools. The web admin GUI never came back after submitting the change, and I could not ssh into the device. It responded to pings, but that was it.
I power cycled the unit and attempted further edits to the pool list. It seemed to work for a little while, then the SP20 hung again.
Operating on a guess that maybe I had specified too many pools, I rebooted again so that I could remove some. Once I saw pings responding, I quickly fired up the web admin GUI and stopped the miner. This allowed me to get back to the pool list and remove a few. Since doing that, the SP20 has run reliably again.
Is there a known problem with too many pools? I had 9 pools specified at the time that the machine went non-responding. I know that's a stupid large number of pools, but I've just been moving disused pools to the bottom of the list with the thinking that if I needed them again, I could just change the order.
If the miner craps out after too many pools are defined, then the UI should probably limit the number that you can specify.
Note that this was with the v2.5.52 firmware.
I have experienced similar behavior from some of my SP20s. Only for me, it was if I made a number of additions or changes on the pool page. So for example, if I added a pool and then did a lot of shuffling of the order or added a bunch of pools at once, the system would sometimes hang. My way around it was to enter a pool, hit submit, navigate to the status page, go back to the pool page and make the next adjustment. I noticed that I could safely make two or three changes to pool order before I experienced a problem. Once I started operating like that, I didn't experience the problem again. Firmware has been upgraded a few times since then and I have not tried it under the latest releases.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4256
Merit: 8587
'The right to privacy matters'
|
|
December 26, 2014, 06:19:38 PM |
|
My SP20 went non-responding yesterday after I added a couple of pools. The web admin GUI never came back after submitting the change, and I could not ssh into the device. It responded to pings, but that was it.
I power cycled the unit and attempted further edits to the pool list. It seemed to work for a little while, then the SP20 hung again.
Operating on a guess that maybe I had specified too many pools, I rebooted again so that I could remove some. Once I saw pings responding, I quickly fired up the web admin GUI and stopped the miner. This allowed me to get back to the pool list and remove a few. Since doing that, the SP20 has run reliably again.
Is there a known problem with too many pools? I had 9 pools specified at the time that the machine went non-responding. I know that's a stupid large number of pools, but I've just been moving disused pools to the bottom of the list with the thinking that if I needed them again, I could just change the order.
If the miner craps out after too many pools are defined, then the UI should probably limit the number that you can specify.
Note that this was with the v2.5.52 firmware.
well 9 makes me think that 8 is max. I have the same problem if I try to run 9 s-3's on mmpool.org So maybe the coding maxes at 8 . I don't have 9 sp20's in house but I bet you that 9 on 1 name won't work at mmpool.org It could be just a coincident event that 8 works and 9 does not. but both miners use cgminer. maybe there is a limit of 8 pools.
|
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
|
December 26, 2014, 06:55:13 PM |
|
Again please submit a ticket.
A bit offtopic, but I just sent you an e-mail too since you are available today. Thanks.
|
|
|
|
|