Bitcoin Forum
December 17, 2017, 07:13:59 AM *
News: Latest stable version of Bitcoin Core: 0.15.1  [Torrent].
 
   Home   Help Search Donate Login Register  
Pages: « 1 ... 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 [102] 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 ... 221 »
  Print  
Author Topic: [ANN]CureCoin - CURECOIN TEAM HAS TAKEN RANK 1 ON FOLDING@HOME!!!  (Read 668213 times)
LasersHurt
Member
**
Offline Offline

Activity: 75


View Profile
May 30, 2014, 11:57:30 AM
 #2021

I'll gave it a try.

Is there some sort of .conf file when you can specify overclock settings under windows?
Is there some tweaks to have your gpu at 100% like in other mining coins?

I have 2 R9 290, what Hashrate should I expected, and where can I see it?

Overclocking is actually discouraged, as it tends to lead to small errors that can cause you to lose a work unit or have it "hang" near the end. Start with Stock clocks on everything.

I believe that the 290 does something like 150,000PPD plus, but I'm guessing a bit there.
1513494839
Hero Member
*
Offline Offline

Posts: 1513494839

View Profile Personal Message (Offline)

Ignore
1513494839
Reply with quote  #2

1513494839
Report to moderator
1513494839
Hero Member
*
Offline Offline

Posts: 1513494839

View Profile Personal Message (Offline)

Ignore
1513494839
Reply with quote  #2

1513494839
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1513494839
Hero Member
*
Offline Offline

Posts: 1513494839

View Profile Personal Message (Offline)

Ignore
1513494839
Reply with quote  #2

1513494839
Report to moderator
1513494839
Hero Member
*
Offline Offline

Posts: 1513494839

View Profile Personal Message (Offline)

Ignore
1513494839
Reply with quote  #2

1513494839
Report to moderator
Aboy68
Member
**
Offline Offline

Activity: 96


View Profile
May 30, 2014, 12:59:57 PM
 #2022

I'll gave it a try.

Is there some sort of .conf file when you can specify overclock settings under windows?
Is there some tweaks to have your gpu at 100% like in other mining coins?

I have 2 R9 290, what Hashrate should I expected, and where can I see it?

Overclocking is actually discouraged, as it tends to lead to small errors that can cause you to lose a work unit or have it "hang" near the end. Start with Stock clocks on everything.

I believe that the 290 does something like 150,000PPD plus, but I'm guessing a bit there.

I agree, the best you can do is to set all your CPU GPU to factory settings ea original BIOS!! This is very important.
To give you even more stability you can schange in your motherboard bios settings the PCIe version to 2, the bandwith of 3 is not used and 2 gives more stability in the PCIe clocking.

When you start to fold you get a "work" for each GPU, they are different size, but in avarage they are about 2 days long to complete, you get your point when the software do upload a finished work to standford, when you are new all works a started at the same time that gives you about 2 days lag to get any results like statisitics or coins. This is smoded out when times passes by and all different works are scaddered around in time.

1: Please use factory settings - NO changes of settings.
2: You need a pair 1 CPU to 1 GPU, if you have 3GPU in one computer then the CPU need to have at least 3 CPU's
3: Install the software and change to "FULL" speed
4: You should not check the GPU or CPU load, it does not tell you anything.
5: After about 1 hour you can check if the xx.x1 numbers are changing, the PPD point per day is the numbers you should study.(and tpf)
6: You get around 150000 PPD from 1 290x GPU + some fue point of an CPU core folding.
7: If you get that a work stops at 99.99 then the syncronisation with the worker and the work is lost, you only need to pause(Wait until they turn yellow with the pause text), now you restarts the folding again. This you do by right click on the worker that are connected to the stalled work, not on the big buttons (OK that works to)
8: wait, wait, wait, wait, you get your coins.
9: The folding homepage numbers are all nothing to look, they send you the coins you earns every day.
10: This is a good statisitics page to check you progress by hour, day, week, month...
       This is my statistics (I have been in and out for a couple days, thats wy they are so ...)
       http://folding.extremeoverclocking.com/user_summary.php?s=&u=656893
       After a couple of days your statisitics are found if you search your name here:
       http://folding.extremeoverclocking.com/team_list.php?s=
11:When time passes by you statistics stabilises and grows day by day until they flats out.

I have studied coins, scrypt, scrypt-N, X11 and cure coin are different, it have a great reason to mint the couns, to find cure to desisses!

Happy folding with curecoin Smiley

//Aboy68

By the way, tpf are the avarage time you need to fold 1%, please remember you need to fold a complete 1% to get some sort of good number out of that, if you have around 7 to 9 min then you are right on target.!! If you don't have it - wait, wait - only with 99.99% you need to do anything!
Aboy68
Member
**
Offline Offline

Activity: 96


View Profile
May 30, 2014, 01:13:54 PM
 #2023

ChasingTheDream I'm closing up!  Cool
Aboy68
Member
**
Offline Offline

Activity: 96


View Profile
May 30, 2014, 01:15:29 PM
 #2024

ooitsme - a question:
What hardware to you have that makes this huge numbers?
//Interested.
MrE78
Full Member
***
Offline Offline

Activity: 140


View Profile
May 30, 2014, 01:28:59 PM
 #2025

Just a reminder: use 14.4 drivers. Gave me 35% more coins.  Shocked
14.6 is the latest.
AMD claims up to 25% speed-up in some games.

http://support.amd.com/en-us/kb-articles/Pages/latest-catalyst-windows-beta.aspx?cmpid=social24760556
I'm getting 570k ppd on a rig that had 500k ppd.

That would be roughly the equivalent of a 350,000 PPD increase for me.  Definitely worth it.  Consequently, tonight I'll be setting that up.  Thanks for the information!  Have you had any stability issues?
No new issues with 14.6 for me.

My experience with 14.6 with multi-card computers using 290X TRIX cards has been horrible so I wanted to post it real fast.  I installed the 14.6 drivers on 6 machines before I starting rolling back to the 14.4.  I could not go more than 10 minutes without a Windows cash on Windows 7 x64.  The one machine where I have a single 290X TRIX card has not shown the same problems but literally every machine that I have these drivers installed and has two 290X TRIX cards has BSD'd at least once and some machines have BSD'd several multiple times in less than an hour.


I have double 290x toxics in two machines running 14.6 they are both stable at factory OC though I see no gain/loss difference in the 14.4 to the 14.6.. The question is did you do a clean install of the drivers?

Like CEX.IO but better SCRYPT.CC Scrypt based cloud hashing PM for script for auto reinvest
ifyoubuildit
Jr. Member
*
Offline Offline

Activity: 48


View Profile
May 30, 2014, 03:10:49 PM
 #2026

I don't know who led to this, but there were a number of tweets yesterday about curecoin from well respected people on twitter. The one below was even favorited by Mark Andreeson, a legendary venture capitalist. Imo, this effort is more valuable than buying a booth at a conference.

elizabeth stark ‏@starkness  21h
Love the idea of using cryptocurrencies to help solve real world problems such as @foldingathome via distributed computing. #curecoin

or this one - 9k followers including some big names:

Thor Muller ‏@tempo  21h
Who says cryptocurrency mining has to be wasteful? #CureCoin uses mining processes to fold proteins/cure disease http://curecoin.net/
matt608
Hero Member
*****
Offline Offline

Activity: 896



View Profile
May 30, 2014, 03:13:45 PM
 #2027

Curecoin got a mention on http://www.usv.com/ - go and upvote! Smiley

       ▄██▄
       █████
        ▀███▌
          ███  ▄███▄
          ▐█▌ ██████▌
     ████  ▀  ██████▌
     ████    ▐██████
     ▐███▌   █████▀
     ▐███   ▐████
     ███▀  ▄███
    ▄██   █▀▀  ▄▄▄
   ▄▀       ▄█████▀
       ▄▄▄██████▀
.HydroMiner
~~~~~~~~~~~~
.           ▄▄▄▄         ▄▄▄▄
        ▄██████▌       ▐██████▄
      ▄████████▌       ▐████████▄
    ▄██████████▌       ▐██████████▄
   ██████▀▐████▌       ▐████▌▀██████
  █████▀  ▐████▌        ▀███▌  ▀█████
 █████    ▐████▌          ▀█▌    █████
▐████▌    ▐█████▄▄▄▄▄▄▄▄▄▄       ▐████▌
█████      ▀███████████████▄      █████
▐████▌        ▀▀▀▀▀▀▀▀▀█████▌    ▐████▌
 █████    ▐█▄          ▐████▌    █████
  █████▄  ▐███▄        ▐████▌  ▄█████
   ██████▄▐████▌       ▐████▌▄██████
    ▀██████████▌       ▐██████████▀
      ▀████████▌       ▐████████▀
        ▀██████▌       ▐██████▀
           ▀▀▀▀         ▀▀▀▀
.Green Mining with Hydro Power
             ▐█▌             
             ███             
            ▄███▄            
           ▐█████▌           
          ▄████▀██▄          
        ▄████▀  ████▄        
       █████    ██████       
     ▄████▀     ███████▄     
    █████      ▄█████████    
  ▄█████     ▄████████████▄  
 ▐█████    ▄███████████████▌ 
 █████   ▄██████████████████ 
 █████  ▄███████████████████ 
 ▐████ ████████████████████▌ 
  ▀███████████████████████▀  
   ▀█████████████████████▀   
     ▀█████████████████▀     
        ▀▀▀███████▀▀▀      
ChasingTheDream
Sr. Member
****
Offline Offline

Activity: 293


View Profile
May 30, 2014, 03:33:07 PM
 #2028

Just a reminder: use 14.4 drivers. Gave me 35% more coins.  Shocked
14.6 is the latest.
AMD claims up to 25% speed-up in some games.

http://support.amd.com/en-us/kb-articles/Pages/latest-catalyst-windows-beta.aspx?cmpid=social24760556
I'm getting 570k ppd on a rig that had 500k ppd.

That would be roughly the equivalent of a 350,000 PPD increase for me.  Definitely worth it.  Consequently, tonight I'll be setting that up.  Thanks for the information!  Have you had any stability issues?
No new issues with 14.6 for me.

My experience with 14.6 with multi-card computers using 290X TRIX cards has been horrible so I wanted to post it real fast.  I installed the 14.6 drivers on 6 machines before I starting rolling back to the 14.4.  I could not go more than 10 minutes without a Windows cash on Windows 7 x64.  The one machine where I have a single 290X TRIX card has not shown the same problems but literally every machine that I have these drivers installed and has two 290X TRIX cards has BSD'd at least once and some machines have BSD'd several multiple times in less than an hour.


I have double 290x toxics in two machines running 14.6 they are both stable at factory OC though I see no gain/loss difference in the 14.4 to the 14.6.. The question is did you do a clean install of the drivers?

I used AMD's express uninstall that is supposed to uninstall everything.  Did you use something else?  I've got 15 290X TRIX cards spread out across 8 computers and not a single one of them will fold at factory OC speeds.  I had to underclock them by a large amount to keep them stable.

Did you mean you have 280X Toxics?  I didn't think 290X Toxics were out yet.
ozzy1926
Sr. Member
****
Offline Offline

Activity: 364


View Profile
May 30, 2014, 03:50:34 PM
 #2029

https://www.cryptobullionpools.com/ doesnt let me withdraw my coins
ChasingTheDream
Sr. Member
****
Offline Offline

Activity: 293


View Profile
May 30, 2014, 03:50:48 PM
 #2030

i have a question:

  • My FAH showd a PPD of 850.000 (6 x GPU R9 280x)
  • At cryptobullionpools.com my account show only a 133.000 PPD for 30 hours and current balance only 4.55 CURECOIN

whats going on? F@H show 850.000 PPD but the cryptobullionpools.com show 133.000 PPD for a miserable 4.55 CURE = 0.00364BTC

There is no way i will keep folding at this pace

850.000 (6 x GPU R9 280x) is what you get, it will vary depending on works etc.... so this is not an issue.
Your payout is lagging 2days, you need to have patience and wait, you will get your coins, you will get around 25 CURE for 6 280x.
I have 24 and I get around 100 CURE, from 90 to 100 depending on ...... weather and winds... Smiley
Happy?

thanks, too bad CURE price is falling too low, its not worth mining at this stage... X11 algo at coinmine.pw gives better payout with same power consumption

How does X11 help find cures for the various diseases that CureCoin are F@H is striving to cure?
Many are here for profit, or at least some return of investment.

I may don't care if I earn 20% less money with your coin than with other coin, if thoses lost procure some science improvement, but I can't afford a 70% loss in my "business plan".
That's the point of thoses "profitability" questions about the amount of money a card will gave per day, and his power consomption.

I understand and I even participated in that up to the launch of CureCoin.  What I saw was that any "profitable" coin was short lived because everyone hopped on it and then dumped it.

If / when people determine the coin hopping is not very beneficial, I hope they consider pointing their GPU's at folding for CureCoin long term because any money is better than nothing and at least the processing power makes a difference in the world.

I have not sold a single CureCoin since I started mining and I don't plan to for a very long time (years).  If I end up with nothing, I'm ok with it.  At least the work units meant something.  If CureCoin ends up being worth $5 at some point then I guess I'll have quite a profit.  I'll check in a couple years.
LasersHurt
Member
**
Offline Offline

Activity: 75


View Profile
May 30, 2014, 03:58:02 PM
 #2031

https://www.cryptobullionpools.com/ doesnt let me withdraw my coins

The Manual Payout does not seem to work as expected. Set the Automatic Payout to 1 and you will get the coins during the daily payout.
boubou
Full Member
***
Offline Offline

Activity: 196


View Profile
May 30, 2014, 04:00:57 PM
 #2032

I'll gave it a try.

Is there some sort of .conf file when you can specify overclock settings under windows?
Is there some tweaks to have your gpu at 100% like in other mining coins?

I have 2 R9 290, what Hashrate should I expected, and where can I see it?

Overclocking is actually discouraged, as it tends to lead to small errors that can cause you to lose a work unit or have it "hang" near the end. Start with Stock clocks on everything.

I believe that the 290 does something like 150,000PPD plus, but I'm guessing a bit there.

I agree, the best you can do is to set all your CPU GPU to factory settings ea original BIOS!! This is very important.
To give you even more stability you can schange in your motherboard bios settings the PCIe version to 2, the bandwith of 3 is not used and 2 gives more stability in the PCIe clocking.

When you start to fold you get a "work" for each GPU, they are different size, but in avarage they are about 2 days long to complete, you get your point when the software do upload a finished work to standford, when you are new all works a started at the same time that gives you about 2 days lag to get any results like statisitics or coins. This is smoded out when times passes by and all different works are scaddered around in time.

1: Please use factory settings - NO changes of settings.
2: You need a pair 1 CPU to 1 GPU, if you have 3GPU in one computer then the CPU need to have at least 3 CPU's
3: Install the software and change to "FULL" speed
4: You should not check the GPU or CPU load, it does not tell you anything.
5: After about 1 hour you can check if the xx.x1 numbers are changing, the PPD point per day is the numbers you should study.(and tpf)
6: You get around 150000 PPD from 1 290x GPU + some fue point of an CPU core folding.
7: If you get that a work stops at 99.99 then the syncronisation with the worker and the work is lost, you only need to pause(Wait until they turn yellow with the pause text), now you restarts the folding again. This you do by right click on the worker that are connected to the stalled work, not on the big buttons (OK that works to)
8: wait, wait, wait, wait, you get your coins.
9: The folding homepage numbers are all nothing to look, they send you the coins you earns every day.
10: This is a good statisitics page to check you progress by hour, day, week, month...
       This is my statistics (I have been in and out for a couple days, thats wy they are so ...)
       http://folding.extremeoverclocking.com/user_summary.php?s=&u=656893
       After a couple of days your statisitics are found if you search your name here:
       http://folding.extremeoverclocking.com/team_list.php?s=
11:When time passes by you statistics stabilises and grows day by day until they flats out.

I have studied coins, scrypt, scrypt-N, X11 and cure coin are different, it have a great reason to mint the couns, to find cure to desisses!

Happy folding with curecoin Smiley

//Aboy68

By the way, tpf are the avarage time you need to fold 1%, please remember you need to fold a complete 1% to get some sort of good number out of that, if you have around 7 to 9 min then you are right on target.!! If you don't have it - wait, wait - only with 99.99% you need to do anything!
Thanks for your answer.

One of my 290 has a 151000ppd, the other one only 118000, don't know what to change, check Sad

BEHNZiP6UZunp41vurNaQi4r2hvgG57yzi : BdG
ranlo
Legendary
*
Offline Offline

Activity: 1610



View Profile
May 30, 2014, 04:01:56 PM
 #2033

https://www.cryptobullionpools.com/ doesnt let me withdraw my coins

The Manual Payout does not seem to work as expected. Set the Automatic Payout to 1 and you will get the coins during the daily payout.

Thanks for clarifying this. I was about to report the same issue (I tried to send manual payouts 3x yesterday to my wallet and it kept saying it'd be there within 1m but never sent). I'll see how this one goes.

Do you know the time (and zone) when they payouts usually occur?


 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 




















Earn Devcoins by Writing
ChasingTheDream
Sr. Member
****
Offline Offline

Activity: 293


View Profile
May 30, 2014, 04:04:20 PM
 #2034

https://www.cryptobullionpools.com/ doesnt let me withdraw my coins

The Manual Payout does not seem to work as expected. Set the Automatic Payout to 1 and you will get the coins during the daily payout.

Thanks for clarifying this. I was about to report the same issue (I tried to send manual payouts 3x yesterday to my wallet and it kept saying it'd be there within 1m but never sent). I'll see how this one goes.

Do you know the time (and zone) when they payouts usually occur?

I get the automatic payouts at 14:15 Central Time.
boubou
Full Member
***
Offline Offline

Activity: 196


View Profile
May 30, 2014, 04:11:35 PM
 #2035



I understand and I even participated in that up to the launch of CureCoin.  What I saw was that any "profitable" coin was short lived because everyone hopped on it and then dumped it.

If / when people determine the coin hopping is not very beneficial, I hope they consider pointing their GPU's at folding for CureCoin long term because any money is better than nothing and at least the processing power makes a difference in the world.

I have not sold a single CureCoin since I started mining and I don't plan to for a very long time (years).  If I end up with nothing, I'm ok with it.  At least the work units meant something.  If CureCoin ends up being worth $5 at some point then I guess I'll have quite a profit.  I'll check in a couple years.

In order than the Coin live in the long term, there shold be some marketting aspect developped. I assume that if a coin has some value, it's because people want to buy it, and actually that aspect is not developped in the topic.

May be if the price is dropping, it's because there is more miner (like me) that discovered this coin, so create more coin, and dumped them because they don't see any bright future for the coin in the real life (shop, etc). So people want to point theirs gpu to that coin to help science, and dump the coin to have some ROI.

This coin seems to be a winner in its design, using our gpu for real scientific benefits instead of wasted power, but too many times such charitable projects are not balanced with marketting aspects and are left behind.
Pointing our gpu for long term without any idea of profit should not be an argument (even if many does).

PS: I'm french, and have some difficulties with the English language, so the friendly aspects of my post is often not visible when people read hem.

BEHNZiP6UZunp41vurNaQi4r2hvgG57yzi : BdG
MrE78
Full Member
***
Offline Offline

Activity: 140


View Profile
May 30, 2014, 04:26:19 PM
 #2036

Just a reminder: use 14.4 drivers. Gave me 35% more coins.  Shocked
14.6 is the latest.
AMD claims up to 25% speed-up in some games.

http://support.amd.com/en-us/kb-articles/Pages/latest-catalyst-windows-beta.aspx?cmpid=social24760556
I'm getting 570k ppd on a rig that had 500k ppd.

That would be roughly the equivalent of a 350,000 PPD increase for me.  Definitely worth it.  Consequently, tonight I'll be setting that up.  Thanks for the information!  Have you had any stability issues?
No new issues with 14.6 for me.

My experience with 14.6 with multi-card computers using 290X TRIX cards has been horrible so I wanted to post it real fast.  I installed the 14.6 drivers on 6 machines before I starting rolling back to the 14.4.  I could not go more than 10 minutes without a Windows cash on Windows 7 x64.  The one machine where I have a single 290X TRIX card has not shown the same problems but literally every machine that I have these drivers installed and has two 290X TRIX cards has BSD'd at least once and some machines have BSD'd several multiple times in less than an hour.


I have double 290x toxics in two machines running 14.6 they are both stable at factory OC though I see no gain/loss difference in the 14.4 to the 14.6.. The question is did you do a clean install of the drivers?

I used AMD's express uninstall that is supposed to uninstall everything.  Did you use something else?  I've got 15 290X TRIX cards spread out across 8 computers and not a single one of them will fold at factory OC speeds.  I had to underclock them by a large amount to keep them stable.

Did you mean you have 280X Toxics?  I didn't think 290X Toxics were out yet.

Derp on my end I have the TriX like you, I have a few of the 280x toxics in boxes to my left waiting on the rest of my wifes new computer. All I did was the express uninstall, I do not have the CPU folding at all though maybe that could help you out.  Also on win7 64 bit 8gb ram I5s 2500k/2600k

Like CEX.IO but better SCRYPT.CC Scrypt based cloud hashing PM for script for auto reinvest
Aboy68
Member
**
Offline Offline

Activity: 96


View Profile
May 30, 2014, 04:26:44 PM
 #2037

I'll gave it a try.

Is there some sort of .conf file when you can specify overclock settings under windows?
Is there some tweaks to have your gpu at 100% like in other mining coins?

I have 2 R9 290, what Hashrate should I expected, and where can I see it?

Overclocking is actually discouraged, as it tends to lead to small errors that can cause you to lose a work unit or have it "hang" near the end. Start with Stock clocks on everything.

I believe that the 290 does something like 150,000PPD plus, but I'm guessing a bit there.

I agree, the best you can do is to set all your CPU GPU to factory settings ea original BIOS!! This is very important.
To give you even more stability you can schange in your motherboard bios settings the PCIe version to 2, the bandwith of 3 is not used and 2 gives more stability in the PCIe clocking.

When you start to fold you get a "work" for each GPU, they are different size, but in avarage they are about 2 days long to complete, you get your point when the software do upload a finished work to standford, when you are new all works a started at the same time that gives you about 2 days lag to get any results like statisitics or coins. This is smoded out when times passes by and all different works are scaddered around in time.

1: Please use factory settings - NO changes of settings.
2: You need a pair 1 CPU to 1 GPU, if you have 3GPU in one computer then the CPU need to have at least 3 CPU's
3: Install the software and change to "FULL" speed
4: You should not check the GPU or CPU load, it does not tell you anything.
5: After about 1 hour you can check if the xx.x1 numbers are changing, the PPD point per day is the numbers you should study.(and tpf)
6: You get around 150000 PPD from 1 290x GPU + some fue point of an CPU core folding.
7: If you get that a work stops at 99.99 then the syncronisation with the worker and the work is lost, you only need to pause(Wait until they turn yellow with the pause text), now you restarts the folding again. This you do by right click on the worker that are connected to the stalled work, not on the big buttons (OK that works to)
8: wait, wait, wait, wait, you get your coins.
9: The folding homepage numbers are all nothing to look, they send you the coins you earns every day.
10: This is a good statisitics page to check you progress by hour, day, week, month...
       This is my statistics (I have been in and out for a couple days, thats wy they are so ...)
       http://folding.extremeoverclocking.com/user_summary.php?s=&u=656893
       After a couple of days your statisitics are found if you search your name here:
       http://folding.extremeoverclocking.com/team_list.php?s=
11:When time passes by you statistics stabilises and grows day by day until they flats out.

I have studied coins, scrypt, scrypt-N, X11 and cure coin are different, it have a great reason to mint the couns, to find cure to desisses!

Happy folding with curecoin Smiley

//Aboy68

By the way, tpf are the avarage time you need to fold 1%, please remember you need to fold a complete 1% to get some sort of good number out of that, if you have around 7 to 9 min then you are right on target.!! If you don't have it - wait, wait - only with 99.99% you need to do anything!
Thanks for your answer.

One of my 290 has a 151000ppd, the other one only 118000, don't know what to change, check Sad

It's noting to change, as long it's running, the 0.01% are going up you are fine. I depends on the content of the works you have in each GPU.
It's the long run days that counts or even your weekly statistics should be stable in the long run.
Aboy68
Member
**
Offline Offline

Activity: 96


View Profile
May 30, 2014, 04:33:48 PM
 #2038



I understand and I even participated in that up to the launch of CureCoin.  What I saw was that any "profitable" coin was short lived because everyone hopped on it and then dumped it.

If / when people determine the coin hopping is not very beneficial, I hope they consider pointing their GPU's at folding for CureCoin long term because any money is better than nothing and at least the processing power makes a difference in the world.

I have not sold a single CureCoin since I started mining and I don't plan to for a very long time (years).  If I end up with nothing, I'm ok with it.  At least the work units meant something.  If CureCoin ends up being worth $5 at some point then I guess I'll have quite a profit.  I'll check in a couple years.

In order than the Coin live in the long term, there shold be some marketting aspect developped. I assume that if a coin has some value, it's because people want to buy it, and actually that aspect is not developped in the topic.

May be if the price is dropping, it's because there is more miner (like me) that discovered this coin, so create more coin, and dumped them because they don't see any bright future for the coin in the real life (shop, etc). So people want to point theirs gpu to that coin to help science, and dump the coin to have some ROI.

This coin seems to be a winner in its design, using our gpu for real scientific benefits instead of wasted power, but too many times such charitable projects are not balanced with marketting aspects and are left behind.
Pointing our gpu for long term without any idea of profit should not be an argument (even if many does).

PS: I'm french, and have some difficulties with the English language, so the friendly aspects of my post is often not visible when people read hem.
I agree with both, long term investment - Yes, doing a good thing - Yes, and we need a complete flow of economic eco system from investors to debitcards - spending the coins in a easy way. I have studied many coins and curecoin is most solid coin I have met but as you say we need to get more  attention in the world to get buyers = higher price, and all people that want to sell the coins now should not sell to a low price, there is buy bots that are all the time trying to get as low price as they can get, don't sell the coins for nothing - that is up to the seller!
Aboy68
Member
**
Offline Offline

Activity: 96


View Profile
May 30, 2014, 04:37:19 PM
 #2039

Do I beat you today or tomorrow?
It's only a 0.087% difference!  Cool
ChasingTheDream
Sr. Member
****
Offline Offline

Activity: 293


View Profile
May 30, 2014, 04:51:26 PM
 #2040

Do I beat you today or tomorrow?
It's only a 0.087% difference!  Cool

Not sure.  My little driver experiment caused me a lot of downtime again so it looks like I'm off 300-500 PPD in the current window here.

http://kakaostats.com/t.php?t=224497


It shows you are actually dropping behind by 600,000 PPD so you must not be fully up to speed yet.
Pages: « 1 ... 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 [102] 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 ... 221 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!