CCminer(SP-MOD) Modded GPU kernels.

[KL0nLutiy]

What the best settings -g and -i for single 750 ti?

[rednoW]

What the best settings -g and -i for single 750 ti?

Do you mean Quark?
My guess is ccminer by sp_ release 43 (thai build ) without any -g or -i parameters. Or maximum -i that doesn't crash
I have no faith in multiple gpu threads ...


For other algos use Release 44 or 45 without -g with manually tuned -i or default -i

[sp_]

submitted faster blake with one thread. Please test and report.

run quark with no launch parameters.

[scryptr]

What the best settings -g and -i for single 750 ti?

Single-threaded I have been able to use "-i 23.5" for Quark.  Multi-threaded, "-g 2 -i 23" gives reasonable hash rates without crashing, this is with build 729.  The multi-threaded rates currently swing a bit at launch, and then settle in at a reasonable rate similar to single threaded performance.  In about 30 minutes, my rigs will have run for 4 hours with "-g 2 -i 23", and I will go to single-threaded for another 4 hours.  With build 729, I will have compared "-g 4 -i 23", "-g 2 -i 23", and "-i 23" (single threaded) about 4-5 hours from now.  

Currently, build 724 gives me the best overall hash rate, local and poolside, when run single-threaded with "-i 23.5" for the 750ti and "-i 23" for my 970s.  Different model 750ti cards have different capacities.  A few were made with 1 gig memory, most with 2 gigs, and there is a rumored 4 gig ASUS 750ti in the works.  The power and factory clocks vary, also.

--scryptr

p.s. build/commit 724 was v45, earlier yesterday, prior to the "...does not validate on CPU" fix based on KlausT's work.

--scryptr

[rednoW]

submitted faster blake with one thread. Please test and report.

run quark with no launch parameters.

all I can say is WOW.
Just built and run quark without any parameters.
Hashrate goes from R43 record 5717 to stable 5810.
GPU memory usage raised from 112mb to 383mb
Power consumption is also raised up to 63% TDP from max 58% of release 43. (gtx 750@1480/1570)
Just need some time to check pool hashrate

[scryptr]

submitted faster blake with one thread. Please test and report.

run quark with no launch parameters.

BASELINE BUILD 730--

I cloned from git and compiled build 730.  I am currently running at baseline (no "-g" or "-i" or other performance flags set) and my 6x750ti FTW rig is mining Quark at 38.1Mh/s, with the 2x970 FTW+ rig running at 29.75Mh/s.  This is superior to the results obtained earlier today with build 729, both 2- threaded and 4-threaded.  There are no errors or fluctuations.

I curtailed any testing on build 729.  My copy is backed-up.  After 4 hours with build 730, I plan on finding the maximum "-i" parameter for a single thread, then testing 2-threaded and 4-threaded mining at maximum intensity.       --scryptr

P.S.  Both of my rigs are delivering "Found nonce $A1B2C3D4" messages in the thread hash reports.  The 8-digit string is any random hexadecimal number that satisfies the block, I suppose.  They don't seem to be errors...       --scryptr

P.P.S.  My poolside hashrate is currently 116Mh/s, more than is being indicated locally on my rigs (about 77.5Mh/s, total, and including the 960 SSC on my work computer).       --scryptr

P.P.P.S.  The rigs are still at 100% accepts after both have more than 250 accepts!       --scryptr

Y.A.P.S. The rigs are still at 100% accepts after more than 500 accepts each!         --scryptr

[sp_]

building release 46 now.. Thanks for testing guys.

[sp_]

After I added scrypt, building takes forever. The exefile is also much bigger. The scrypt kernals are too big. I think I need to shrink and optimize.

[sp_]

1.5.46(sp-MOD) is available here: (25-april-2015)

https://github.com/sp-hash/ccminer/releases/tag/1.5.46

The sourcecode is available here:

https://github.com/sp-hash/ccminer


-Added scrypt and scrypt-n from the motherbranch/cudaminer
-Fixed the hash with the -g parameter (quark, x11,x13,x14,x15,x17)
-Optimized blake(faster quark, x11,x13,x14,x15,x17)

Big thanks to Klaus_t( who fixed the broken hash) https://github.com/KlausT/ccminer
Also thanks to tvpruvot who merged the scrypt kernals from cudaminer https://github.com/tpruvot/ccminer

and the betatesters at bitcointalk.org

[fenomenhaa]

1.5.46(sp-MOD) is available here: (25-april-2015)

https://github.com/sp-hash/ccminer/releases/tag/1.5.46

The sourcecode is available here:

https://github.com/sp-hash/ccminer


-Added scrypt and scrypt-n from the motherbranch/cudaminer
-Fixed the hash with the -g parameter (quark, x11,x13,x14,x15,x17)
-Optimized blake(faster quark, x11,x13,x14,x15,x17)

Big thanks to Klaus_t( who fixed the broken hash) https://github.com/KlausT/ccminer
Also thanks to tvpruvot who merged the scrypt kernals from cudaminer https://github.com/tpruvot/ccminer

and the betatesters at bitcointalk.org

Without any parameter 5*750Ti rig QUARK 30600 increase to 32050.

[scryptr]

GTX 960 SSC--

The 960 card in my Win 7 x64 system is running at 9.98Mh/s with Windows release v46.  It is running single-threaded, with "-i 23.7".  It ran at 9.9Mh/s with no "-i" parameter set, default intensity, when I first started it with v46.  Many times thread hash reports are just over 10Mh/s.  Accepts are at 9.98Mh/s.  This is about 500kh/s better than prior best results with v44 and v45.

      --scryptr

[sp_]

GTX 960 SSC--
The 960 card in my Win 7 x64 system is running at 9.98Mh/s with Windows release v46.  It is running single-threaded, with "-i 23.7".  It ran at 9.9Mh/s with no "-i" parameter set, default intensity, when I first started it with v46.  Many times thread hash reports are just over 10Mh/s.  Accepts are at 9.98Mh/s.
      --scryptr

Defaults are set to -i 23 for compute 5.2 devices(960,970,980..)
and -i 22 for compute 5.0 devices(750,750ti..)

23 was faster on my testrig on the 750ti, but it crashed after some hours.

[sp_]

Without any parameter 5*750Ti rig QUARK 30600 increase to 32050.

Time to donate some satoshis to the developers ?

More free hash is comming..

[sp_]

my 5x 750ti + 1x 280x rig went from 41.5 MHASH to 44.5MHASH (standard clocks, no overclock)

520 watt in the wall. Msi gaming z97 motherboard/ celeron cpu/

[antonio8]

my 5x 750ti + 1x 280x rig went from 41.5 MHASH to 44.5MHASH (standard clocks, no overclock)

520 watt in the wall. Msi gaming z97 motherboard/ celeron cpu/

You're on Linux, correct?

And those cards in same machine?

[scryptr]

1000 ACCEPTS BUILD 730--

After at least 1000 accepts on both rigs, (1000/1005, 6x750ti FTW, 99.5% and 10053/1055, 99.81% 2x970 FTW+), and more than 4 hours, I am going to upgrade to v46 on all cards.  Currently, my rigs are under reported at 66.7Mh/s at the pool, but have been over reported in the recent past.  Poolside rates flucuate.

I am going to upgrade to the release version, v46.       --scryptr

[fenomenhaa]

Without any parameter 5*750Ti rig QUARK 30600 increase to 32050.

Time to donate some satoshis to the developers ?

More free hash is comming..

Sure,soon i'll donate again ))). 5*750Ti 32050  from the wall 395W with amd underclock apu cpu ))) .. i have another 15 280x but they are so bad in quark )) or i don't know latest kernels )))) At this time i changed all my rigs to x13 ENC and BT x11 ...fresh coins and and for now great earnings )).

[chrysophylax]

1.5.46(sp-MOD) is available here: (25-april-2015)

https://github.com/sp-hash/ccminer/releases/tag/1.5.46

The sourcecode is available here:

https://github.com/sp-hash/ccminer


-Added scrypt and scrypt-n from the motherbranch/cudaminer
-Fixed the hash with the -g parameter (quark, x11,x13,x14,x15,x17)
-Optimized blake(faster quark, x11,x13,x14,x15,x17)

Big thanks to Klaus_t( who fixed the broken hash) https://github.com/KlausT/ccminer
Also thanks to tvpruvot who merged the scrypt kernals from cudaminer https://github.com/tpruvot/ccminer

and the betatesters at bitcointalk.org

Without any parameter 5*750Ti rig QUARK 30600 increase to 32050.

with what settings? ...

#crysx

[chrysophylax]

waking up not too long ago and reading back on all this has now got us into overdrive ...

heading to the office and testing the latest build in the next few hours ...

will update here soon guys ...

what is the 'best' commandline paramters for the 750ti oc lp? ...

-g 3 -i 22 ? ... or just run single threaded? ...

#crysx

[DragonSlayer]

Pretty sure -g not working when using -d.