Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Geluss]

HI, Is there a possibility to add CPU coin CPUchain to Claymore dualmining with ETH?

https://bitcointalk.org/index.php?topic=5161183.0

BR
G.

if its a cpu-minable coin only, how do you expect to be mined with Claymore's gpu miner?
Just run your cpu miner alongside your Clay miner and mine it with your cpu

I agree , but Claymore is dual-miner, and CPU could be mined as second coin?
BR
G.

[Trehjulingsleffe]

We made some test 5700XT, nanominer, claymore, phoenix almost same results. (around 1MH difference -/+)

With claymore-eth ~51.2 MH/s, ~100W from wall (whole demo PC with one GPU is ~175W)

Memory: 920 Mhz
Power Limit: -45%
VDDC: 800mV (for 1200Mhz)

Efficiency: 0,512 MH/W

Stock clock benchmarks can be found here. (120 sec results)

https://i.imgur.com/uB4nXPh.jpg

So that is better efficiency that Radeon Vii

I'm running VII at 91MH/s
Core: 1760mhz
Mem: 1000mhz
VDDC: 940mV
213 watt gpu only

Efficiency 0,427 MH/W.

Pros 5700XT vs VII:
Better efficiency
Cheaper price per MH/s ($699/91MH/s=$7,6 Radeon Vii vs $349/51MH/s=$6,8 cheapest Radeon 5700)

Pros VII vs 5700XT:
Fewer cards total in rig
Cheaper price per MH/s than RX5700 if you want RX5700 with better third party cooler ($375/51=$7,64 per MH/s

Sources of prices^*:
VII: https://www.newegg.com/asrock-radeon-vii-16g/p/N82E16814930012
RX5700: https://www.newegg.com/asrock-radeon-rx-5700-rx5700-8g/p/N82E16814930019
RX5700 third party cooler: https://www.newegg.com/msi-radeon-rx-5700-rx-5700-mech-oc/p/N82E16814137466?Item=N82E16814137466

_{*I'm not from the US so i have no clue if newegg is a good place for buying cards and have reasonable prices.}

[heavyarms1912]

NAVI NOW WORKS  NEW DRIVER  AMD 19.9.1    i get  51mh/s on eth    i dont know how to add a pic

Which card? 5700 or XT?
What are your OC settings?
How many watts is it using?

54 MH with max clocked Memory...running 105 watts at the wall with underclock/uv...this can easily be pushed to over 60MH with timing changes and under 100 watts.

Pretty killer card for ETH...guess AMD needed more sales so opened up the driver to miners

Im using 5700 thats flashed to a xt and i dont have a wat tmeter  but according to wattman 95w at 51mh/s im using asrock reference board

flashing to XT won't give any benefit since both use the same GDDR6 at same speed.  ETH is not core bound so higher core speed (which is what the flash primarily does?, remove the sw lock on clock limits) is not gonna give any gains.

[bategojko74]

NAVI NOW WORKS  NEW DRIVER  AMD 19.9.1    i get  51mh/s on eth    i dont know how to add a pic

Can't run Claymore on RX5700 with 19.9.1 driver. Please HELP. My Log is below:

23:43:55:209   2b80   Check and remove old log files...
23:43:55:212   2b80   args: -epool ssl://eu1.ethermine.org:5555 -ewal 0x0............................................................. -di 0 -tt 60 -mode 1
23:43:55:212   2b80   
23:43:55:213   2b80   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
23:43:55:214   2b80   º                Claymore's Dual GPU Miner - v14.6               º
23:43:55:215   2b80   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
23:43:55:215   2b80   º                       Supercharged Edition                     º
23:43:55:216   2b80   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
23:43:55:217   2b80   
23:43:55:217   2b80   b735
23:43:55:419   2b80   ETH: 1 pool is specified
23:43:55:421   2b80   Main Ethereum pool is eu1.ethermine.org:5555
23:43:55:534   2b80   OpenCL platform: AMD Accelerated Parallel Processing
23:43:55:535   2b80   OpenCL platform: NVIDIA CUDA
23:43:55:542   2b80   OpenCL initializing...

23:43:55:543   2b80   AMD Cards available: 1
23:43:55:544   2b80   GPU #0: gfx1010 (AMD Radeon RX 5700 XT), 8176 MB available, 20 compute units (pci bus 41:0:0)
23:43:55:544   2b80   POOL/SOLO version
23:43:55:545   2b80   Platform: Windows
23:43:55:582   2b80   start building OpenCL program for GPU 0...
23:43:55:586   2b80   done
23:43:55:687   2b80   Error: AMD HSA Code Object loading failed.

23:43:55:688   2b80   Cannot build OpenCL program for GPU 0
23:43:56:590   2b80   GPU #0: set -etha as 1 (ETH algo for slow cards)
23:43:56:592   2b80   Total cards: 1
23:44:00:595   2b80   
You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

23:44:01:596   2b80   No NVIDIA cards in the list, NVML library will not be used.
23:44:02:645   2b80   SSL: Imported 43 certificates from local storage
23:44:02:659   3a08   ETH: Stratum - connecting to 'eu1.ethermine.org' <172.65.207.106> port 5555 (SSL/TLS)
23:44:02:722   3a08   cert subject: /OU=Domain Control Validated/OU=PositiveSSL Multi-Domain/CN=ssl935420.cloudflaressl.com
23:44:02:722   3a08   cert issuer: /C=GB/ST=Greater Manchester/L=Salford/O=COMODO CA Limited/CN=COMODO ECC Domain Validation Secure Server CA 2
23:44:02:723   3a08   SSL/TLS encryption is enabled
23:44:02:725   3a08   Pool certificate verified successfully
23:44:02:725   3a08   sent: {"worker": "eth1.0", "jsonrpc": "2.0", "params": ["0x05E62Df24be6ec11C1582eF9d74Efeb37D397bE7", ""], "id": 2, "method": "eth_submitLogin"}

23:44:02:726   3a08   ETH: Stratum - Connected (eu1.ethermine.org:5555) (SSL/TLS)
23:44:02:747   2b80   ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)

23:44:02:749   2b80   ETH: eth-proxy stratum mode
23:44:02:750   2b80   Watchdog enabled
23:44:02:750   2b80   Remote management (READ-ONLY MODE) is enabled on port 3333
23:44:02:751   2b80   

23:44:02:771   3a08   buf: {"id":2,"jsonrpc":"2.0","result":true}

23:44:02:772   3a08   ETH: Authorized
23:44:02:774   3a08   sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

23:44:02:829   3a08   buf: {"id":0,"jsonrpc":"2.0","result":["0xc3163b581a5450245353ad2d85fe207ead2d43dd42c3abd3a78c5f36318df230","0x179e3265179c8090feb52c8d9bce9c6c3edc6cfd1be0def2fc23656a5702b0c3","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x8194d3"]}

23:44:02:932   3208   Setting DAG epoch #283...
23:44:05:327   3208   Setting DAG epoch #283 for GPU0
23:44:05:329   3208   Create GPU buffer for GPU0
23:44:05:365   3208   GPU0, OpenCL error -48 (0) - cannot create DAG on GPU

23:44:06:612   3a08   buf: {"id":0,"jsonrpc":"2.0","result":["0x345aa9f2d21fde053b384d183c04c21f228d6ade1e49ba861630ad1b8387e294","0x179e3265179c8090feb52c8d9bce9c6c3edc6cfd1be0def2fc23656a5702b0c3","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x8194d3"]}

23:44:06:613   3a08   ETH: 09/05/19-23:44:06 - New job from eu1.ethermine.org:5555
23:44:06:614   3a08   target: 0x0000000112e0be82 (diff: 4000MH), epoch 283(3.21GB)
23:44:06:616   3a08   ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
23:44:06:617   3a08   ETH: GPU0 0.000 Mh/s
23:44:08:368   3208   Set global fail flag, failed GPU0
23:44:08:369   3208   GPU 0 failed
23:44:08:371   2d9c   Setting DAG epoch #283 for GPU0
23:44:08:390   2d9c   GPU0, OpenCL error -48 (0) - cannot create DAG on GPU

23:44:10:435   3624   GPU 0 temp = 42, old fan speed = 25, new fan speed = 25

[reb0rn21]

@Claymore's Dual GPU Miner - v14.6

You know you need latest v15.0 for 5700 card?

[KartingProfi]

I agree , but Claymore is dual-miner, and CPU could be mined as second coin?
BR
G.

No, go to cryptoschool.

[big_daddy]

NAVI NOW WORKS  NEW DRIVER  AMD 19.9.1    i get  51mh/s on eth    i dont know how to add a pic

Can't run Claymore on RX5700 with 19.9.1 driver. Please HELP. My Log is below:

23:43:55:209   2b80   Check and remove old log files...
23:43:55:212   2b80   args: -epool ssl://eu1.ethermine.org:5555 -ewal 0x0............................................................. -di 0 -tt 60 -mode 1
23:43:55:212   2b80   
23:43:55:213   2b80   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
23:43:55:214   2b80   º                Claymore's Dual GPU Miner - v14.6               º
23:43:55:215   2b80   º              ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK             º
23:43:55:215   2b80   º                       Supercharged Edition                     º
23:43:55:216   2b80   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
23:43:55:217   2b80   

[...]

the answer is in your Claymore's miner version
You are using an outdated version, download the last (v15.0) and you will solve your problem

[bategojko74]

NAVI NOW WORKS  NEW DRIVER  AMD 19.9.1    i get  51mh/s on eth    i dont know how to add a pic

I've got 52.5 MH/s with -tt 54 -cclock 1300 -mclock 930 -cvddc 750          on 5700 XT. You can lower -tt if it crashes for you until it stop crashes.

[kadot]

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 10.1/8.0
GPU #0: Tesla V100-PCIE-16GB, 16130 MB available, 80 compute units, capability: 7.0  (pci bus 175:0:0)
Total cards: 1
ETH: Stratum - connecting to 'eth-us-east1.nanopool.org' <142.44.243.6> port 9999 (unsecure)
ETH: Stratum - Connected (eth-us-east1.nanopool.org:9999) (unsecure)
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
Watchdog enabled

ETH: Authorized
Setting DAG epoch #283(3.21GB)...
ETH: 09/06/19-21:41:38 - New job from eth-us-east1.nanopool.org:9999
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s
Setting DAG epoch #283 for GPU0
Create GPU buffer for GPU0
GPU 0, GpuMiner cu_kd failed 8 (0), invalid device function
GPU 0, Calc DAG failed!
GPU 0 failed

Any tips, to make claymore work with Tesla v100 on ubuntu?

[KartingProfi]

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 10.1/8.0

Any tips, to make claymore work with Tesla v100 on ubuntu?

At Windows not working with CUDA 10.1 too (GTX1070).

[ajolly87]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

[Binary100100]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

[0xcosmos]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

what is the power consumption per card from the wall?
i sold my 6x 1060 gpu which hardly did 95 to 100 mh/s
they were all hynix memory cards
looking to get rx5700xt if they are stable at 55 to 60 mh/s without consuming more power

[Binary100100]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

what is the power consumption per card from the wall?
i sold my 6x 1060 gpu which hardly did 95 to 100 mh/s
they were all hynix memory cards
looking to get rx5700xt if they are stable at 55 to 60 mh/s without consuming more power

You'll probably expect about 150w per card if you want to overclock it that high (assuming you could). Shouldn't be anymore than that. Currently, I have yet to see any setting that will accomplish 55+ MH/s... yet.
Wattman says that I'm getting about 101w for each card.

[bategojko74]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

reduce core voltage to 750. Reduce -tt to 54 or lower until it becomes stable. You can even raise memory clock to 930 and find proper lower -tt after that. If you don't wanna lower your target temperature (-tt) you have to lower memory clock (-mclock). So you have to find the balance between -tt and -mclock by experiment.

[Binary100100]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

reduce core voltage to 750. Reduce -tt to 54 or lower until it becomes stable. You can even raise memory clock to 930 and find proper lower -tt after that. If you don't wanna lower your target temperature (-tt) you have to lower memory clock (-mclock). So you have to find the balance between -tt and -mclock by experiment.

Can't get it less than 800 with Afterburrner and with Wattman it reboots whenever I hit apply. I'm thinking that I might need to clean install Adrenaline. But I get a system lock up if I go any higher than 900 on my Memory. It's probably just one of the cards (of three) but I haven't had time to try them one by one to find out.
I did find *some* stability by reducing the power limit -25. It's been running for 8 hours so far. 50.55MH/s and about 105w from Wattman (each).

I can't determine how much the entire rig is using from the wall though because I have everything ran from a 240 and a PDU that has 5 PSU's connected but I can say that for 19 cards I'm drawing 2.9kW (three rigs.) I've just never had this much trouble from a rig before.

[WARMANGALAXY]

DON,T WORK 1660Ti

[bategojko74]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

reduce core voltage to 750. Reduce -tt to 54 or lower until it becomes stable. You can even raise memory clock to 930 and find proper lower -tt after that. If you don't wanna lower your target temperature (-tt) you have to lower memory clock (-mclock). So you have to find the balance between -tt and -mclock by experiment.

Can't get it less than 800 with Afterburrner and with Wattman it reboots whenever I hit apply. I'm thinking that I might need to clean install Adrenaline. But I get a system lock up if I go any higher than 900 on my Memory. It's probably just one of the cards (of three) but I haven't had time to try them one by one to find out.
I did find *some* stability by reducing the power limit -25. It's been running for 8 hours so far. 50.55MH/s and about 105w from Wattman (each).

I can't determine how much the entire rig is using from the wall though because I have everything ran from a 240 and a PDU that has 5 PSU's connected but I can say that for 19 cards I'm drawing 2.9kW (three rigs.) I've just never had this much trouble from a rig before.

Try -mclock 750 from command line.It should work.

[Binary100100]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

reduce core voltage to 750. Reduce -tt to 54 or lower until it becomes stable. You can even raise memory clock to 930 and find proper lower -tt after that. If you don't wanna lower your target temperature (-tt) you have to lower memory clock (-mclock). So you have to find the balance between -tt and -mclock by experiment.

Can't get it less than 800 with Afterburrner and with Wattman it reboots whenever I hit apply. I'm thinking that I might need to clean install Adrenaline. But I get a system lock up if I go any higher than 900 on my Memory. It's probably just one of the cards (of three) but I haven't had time to try them one by one to find out.
I did find *some* stability by reducing the power limit -25. It's been running for 8 hours so far. 50.55MH/s and about 105w from Wattman (each).

I can't determine how much the entire rig is using from the wall though because I have everything ran from a 240 and a PDU that has 5 PSU's connected but I can say that for 19 cards I'm drawing 2.9kW (three rigs.) I've just never had this much trouble from a rig before.

Try -mclock 750 from command line.It should work.

You mean -cvddc 750, right?
Yeah I've tried. Freezes everything up.
Maybe some cards have different memory types like Hynix, Micron, Samsung, etc and that mas something to do with it.
I'm using three XFX RX 5700 XT models.

[bategojko74]

All,

Quick question, is anyone else experiencing instability with the RX5700XT?

It will sit at 51mh/s for a few rounds and then drop down to 21, 8, 9 before going back up to 51mh/s

Power Limit -45%
Memory Max Frequency 910
Core Clock Frequency Auto

Checked Board, Riser and PSU with no luck

On latest drivers and Claymore version

Mine does that too.
I'm actually having more serious issues. I have three cards and can't get my memory any higher than 900. The rig locks up.
Core clock 1300
Memory 900
Core voltage 800

So it'll run for about 20 minutes and then reboot itself. No idea what's going on with it.

reduce core voltage to 750. Reduce -tt to 54 or lower until it becomes stable. You can even raise memory clock to 930 and find proper lower -tt after that. If you don't wanna lower your target temperature (-tt) you have to lower memory clock (-mclock). So you have to find the balance between -tt and -mclock by experiment.

Can't get it less than 800 with Afterburrner and with Wattman it reboots whenever I hit apply. I'm thinking that I might need to clean install Adrenaline. But I get a system lock up if I go any higher than 900 on my Memory. It's probably just one of the cards (of three) but I haven't had time to try them one by one to find out.
I did find *some* stability by reducing the power limit -25. It's been running for 8 hours so far. 50.55MH/s and about 105w from Wattman (each).

I can't determine how much the entire rig is using from the wall though because I have everything ran from a 240 and a PDU that has 5 PSU's connected but I can say that for 19 cards I'm drawing 2.9kW (three rigs.) I've just never had this much trouble from a rig before.

Try -mclock 750 from command line.It should work.

You mean -cvddc 750, right?
Yeah I've tried. Freezes everything up.
Maybe some cards have different memory types like Hynix, Micron, Samsung, etc and that mas something to do with it.
I'm using three XFX RX 5700 XT models.

-cvvdc is the voltage of cores. It has nothing to do with memory. Did you tried ... -tt 53 -cvddc 750...?