Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[padrino]

Dear Friends

What parameter do I use to specify the video card I want to use?

Because I just want to use the "GPU 0"

Thanks
Almir Fiorio

Look at the -di parameter on the first post, it explains how it works.., -di 0 for example.

[justchil]

I have a rig with 6 RX 480

What should driver should I use?

Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).

Obviously I can't change driver everytime I switch.

What driver should I use that's best for both?

Where can I download both of your miner? I didn't see windows version of the miner in drive link.

I use 16.9.2....believe me I've spent hours trying many drivers.

I am using 16.9.1

I love it because I don't have to patch or bypass signature check

The thing is sometimes claymore miner just stuck in the beginning.


It recognizes all cards and that's it. It happens if I lower voltage too much.

Have you done any comparisons vs 16.12.1 / 16.12.2?  I ram running 16.12.2... it does require patching which is an extra step but maybe worth it?

[Claymore]

v9.1:

- added assembler kernels for ETH+SIA and ETH+PASCAL modes (major speedup for SIA and PASCAL).
- added alternative assembler kernels for Tonga and Polaris cards for ETH-only mode. Use them if you get best speed at "-dcri 1" (i.e. you cannot find speed peak), use "-asm 2" option to enable this mode.
- a few minor bug fixes and improvements.

[almirfiorio]

im do this but im hve a error

see my two lines

First
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40 -esm 0 -di 1 -allpools 0 -r 1

Second
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40/WORKER1/almirfiorio@gmail.com -esm 0 -di 0 -allpools 0 -r 1      

this is the error when im open the second gpu with the second pool

ETH - Total Speed: 26.009 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 26.009 Mh/s
server: bind failed with error: 10048, next attempt in 10sec...
server: bind failed with error: 10048, next attempt in 10sec...
ETH: 04/15/17-12:15:54 - New job from eth-us-east1.nanopool.org:9999
ETH - Total Speed: 26.069 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 26.069 Mh/s
server: bind failed with error: 10048, next attempt in 10sec...
server: bind failed with error: 10048, next attempt in 10sec...
ETH: 04/15/17-12:16:11 - SHARE FOUND - (GPU 0)
ETH: 04/15/17-12:16:11 - SHARE FOUND - (GPU 0)
server: bind failed with error: 10048, next attempt in 10

Dear Friends

What parameter do I use to specify the video card I want to use?

Because I just want to use the "GPU 0"

Thanks
Almir Fiorio

Look at the -di parameter on the first post, it explains how it works.., -di 0 for example.

[almirfiorio]

im have same problem

you can help me ?

Hello.
Great work Claymore.
But one question...
Version 4.1 works without problems for me and looks very stable. But 4.3 crash most times after hour (I was start using parameter -r 20  -gser 2 and -mport 3333 from this version) . And version 4.4 drops hashrate from 167MH to 33MH or less and give me this error:
server: bind failed with error: 10048, next attempt in 10sec...

Where can be problem ?

Thank you.

I can send all logs somewhere..

[Claymore]

> server: bind failed with error

Check "FAQ" section in first post of this thread.

[d57heinz]

im do this but im hve a error

see my two lines

First
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40 -esm 0 -di 1 -allpools 0 -r 1

Second
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40/WORKER1/almirfiorio@gmail.com -esm 0 -di 0 -allpools 0 -r 1      

this is the error when im open the second gpu with the second pool

ETH - Total Speed: 26.009 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 26.009 Mh/s
server: bind failed with error: 10048, next attempt in 10sec...
server: bind failed with error: 10048, next attempt in 10sec...
ETH: 04/15/17-12:15:54 - New job from eth-us-east1.nanopool.org:9999
ETH - Total Speed: 26.069 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 26.069 Mh/s
server: bind failed with error: 10048, next attempt in 10sec...
server: bind failed with error: 10048, next attempt in 10sec...
ETH: 04/15/17-12:16:11 - SHARE FOUND - (GPU 0)
ETH: 04/15/17-12:16:11 - SHARE FOUND - (GPU 0)
server: bind failed with error: 10048, next attempt in 10

Dear Friends

What parameter do I use to specify the video card I want to use?

Because I just want to use the "GPU 0"

Thanks
Almir Fiorio

Look at the -di parameter on the first post, it explains how it works.., -di 0 for example.

Need to change your Mport value. They both can't use 3333. -mport 3333 first instance and -mport 3334 for second. That should clear it up. If you don't want it wide open to the internet then put a - in front of port #

[Claymore]

Just got another PM about freezing miner in Windows 10 until any key is pressed.
For all who has this issue:

https://superuser.com/questions/555160/windows-command-prompt-freezing-on-focus
https://superuser.com/questions/419717/windows-command-prompt-freezing-randomly?rq=1
https://superuser.com/questions/1051821/command-prompt-random-pause?rq=1

[almirfiorio]

Dear d57heinz

im to this, but the two pools use same gpu0.
in first lines appears the correct gpu
but after all changes to "gpu0"

im put -di0 in first and -di1 and second

see images

Need to change your Mport value. They both can't use 3333. -mport 3333 first instance and -mport 3334 for second. That should clear it up. If you don't want it wide open to the internet then put a - in front of port #

[d57heinz]

Dear d57heinz

im to this, but the two pools use same gpu0.
in first lines appears the correct gpu
but after all changes to "gpu0"

im put -di0 in first and -di1 and second

see images

Need to change your Mport value. They both can't use 3333. -mport 3333 first instance and -mport 3334 for second. That should clear it up. If you don't want it wide open to the internet then put a - in front of port #

You are putting a space between the -di 0. And -di 1 correct?  Nvm. Maybe is bug of some sort

[almirfiorio]

yes

see the commands

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40/WORKER1/almirfiorio@gmail.com -mport 0 -di 0

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40  -eworker WORKER1 -mport 0 -di 1 -r 1

You are putting a space between the -di 0. And -di 1 correct?

[d57heinz]

yes

see the commands

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40/WORKER1/almirfiorio@gmail.com -mport 0 -di 0

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40  -eworker WORKER1 -mport 0 -di 1 -r 1

You are putting a space between the -di 0. And -di 1 correct?

Is there any particular reason you are using such old version. 5.3?? Dl 9.0 or 9.1.

[almirfiorio]

hmmm

in what place im can download the 9.1 ?

What is the utility of -mport  im cam put -mport 0 ?

Thanks
Almir

is there any particular reason you are using such old version. 5.3?? Dl 9.0 or 9.1.

[molitar]

Just got another PM about freezing miner in Windows 10 until any key is pressed.
For all who has this issue:

https://superuser.com/questions/555160/windows-command-prompt-freezing-on-focus
https://superuser.com/questions/419717/windows-command-prompt-freezing-randomly?rq=1
https://superuser.com/questions/1051821/command-prompt-random-pause?rq=1

Thanks for finding them references turned off the quick edit and insert mode.  So far no stalls while running now when I put focus on it.. Now to test the new 9.1 so guess I'll find out how it effects the start up.

Very nice startup was faster than before in 9.1 and no stall or hangs.  In fact my eth total hash rate went from max of 213 MH/s to 224 MH/s.. so you even managed to squeeze a bit more eth out of it.  Very nice update!

[jackbox]

I just started trying 9.1. At the same dcri setting of 25 on 9.0 I was hashing ETH at just over 22 MH/s and PASC at 288 MH/s (this was my cards sweet spot - I have not modded the bios yet). When I started 9.1 with asm mode enabled with the same dcri setting it was only hashing ETH at around 15 MH/s and PASC at around 370 MH/s. I then played around with dcri and at a setting of 14 I am now hashing ETH around 22.4 MH/s and PASC at 315 MH/s. So I am getting no extra has on ETH but getting about 27 MH/s extra on PASC.

[d57heinz]

hmmm

in what place im can download the 9.1 ?

What is the utility of -mport  im cam put -mport 0 ?

Thanks
Almir

is there any particular reason you are using such old version. 5.3?? Dl 9.0 or 9.1.

Check the very first post of this thread. Mport is the management port. If you dbl click the manager folder under the miner folder you will see Ethman.exe. You have to set it up to monitor the ip of the rig. If you set Mport 0 this won't work. Check out the readme file for more info.

BR

[Teress]

On my second 2gpu rig I can't see temperature of my second gpu. I can see only temp of first gpu. I use -di 10 to order my gpus, thats ok, both are mining. But just one of them is showing temperature. Both gpus are the same type.
How to get miner to see both/all gpus temperatures? Thanks for an answer...

[Maicol792]

i'm testing 9.1 

[Xardas2014]

i'm testing 9.1  

You are therefore testing my nerves

[almirfiorio]

in Claymore 9.1 the option -dcri 1 will increase speed?

what is the best line in claymore 9.1 to get the maxximum speed?

v9.1:

- added assembler kernels for ETH+SIA and ETH+PASCAL modes (major speedup for SIA and PASCAL).
- added alternative assembler kernels for Tonga and Polaris cards for ETH-only mode. Use them if you get best speed at "-dcri 1" (i.e. you cannot find speed peak), use "-asm 2" option to enable this mode.
- a few minor bug fixes and improvements.