Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[molitar]

Any update on other coins getting new Algo?  I am sick of Decred and the lack of good pools.

No DCR pools with 2FA at all.  Other pools that payout directly to wallet are not very reliable.. too many people in them or payouts are delayed. I wish to get back to another coin like Pascal that I can use on Coinotron with the new Algo.

[1715056478]

1715056478

[1715056478]

1715056478

[1715056478]

1715056478

[1715056478]

1715056478

[1715056478]

1715056478

[mindragon]

I can't seem to make it work with NiceHash. Does anyone have any ideas?

-di 0 -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal blah  -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.usa.nicehash.com:3354 -dwal blah

21:01:27:428   c10   checkread timeout
21:01:27:528   d54   checkread timeout
21:01:32:444   c10   checkread timeout
21:01:32:545   d54   checkread timeout
21:01:37:467   c10   checkread timeout
21:01:37:567   d54   checkread timeout
21:01:41:612   c10   socket was closed remotely
21:01:41:612   c10   ETH: Job timeout, disconnect, retry in 20 sec...
21:01:41:712   d54   socket was closed remotely
21:01:41:712   d54    DCR: Job timeout, disconnect, retry in 20 sec...

Are you using nicehash GUI or bat file ?

I'm using a batch file. I couldn't see anything in the GUI.

Logs...

09:54:51:949   296c   args: -di 0 -epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal ADDR -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.usa.nicehash.com:3354 -dwal ADDR
09:54:51:949   296c   
09:54:51:949   296c   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
09:54:51:949   296c   º      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.0      º
09:54:51:949   296c   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
09:54:51:949   296c   
09:54:52:164   296c   ETH: 1 pool is specified
09:54:52:164   296c   Main Ethereum pool is daggerhashimoto.usa.nicehash.com:3353
09:54:52:164   296c   DCR: 1 pool is specified
09:54:52:164   296c   Main Decred pool is decred.usa.nicehash.com:3354
09:54:52:434   296c   OpenCL platform: AMD Accelerated Parallel Processing
09:54:52:450   296c   OpenCL initializing...

09:54:52:450   296c   AMD Cards available: 2
09:54:52:450   296c   GPU #0: Hawaii, 4096 MB available, 44 compute units
09:54:52:450   296c   GPU #0 recognized as Radeon 290X
09:54:52:450   296c   POOL/SOLO version
09:54:52:450   296c   b315
09:54:52:450   296c   Platform: Windows
09:54:52:481   296c   start building OpenCL program for GPU 0...
09:54:52:982   296c   done
09:54:53:234   296c   GPU #0: algorithm ASM
09:54:53:234   296c   cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
09:54:53:234   296c   No NVIDIA CUDA GPUs detected.
09:54:53:234   296c   Total cards: 1
09:55:02:473   296c   No NVIDIA cards in the list, NVML library will not be used.
09:55:02:536   96c   ETH: Stratum - connecting to 'daggerhashimoto.usa.nicehash.com' <198.11.193.180> port 3353
09:55:02:589   96c   send: {"id": 1, "method": "mining.subscribe", "params": ["MinerName/1.0.0", "EthereumStratum/1.0.0"]}

09:55:02:589   96c   send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

09:55:02:604   296c   DUAL MINING MODE ENABLED: ETHEREUM+DECRED

09:55:02:604   296c   ETH: nicehash stratum mode

09:55:02:604   96c   ETH: Stratum - Connected (daggerhashimoto.usa.nicehash.com:3353)
09:55:02:604   296c   "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
09:55:02:604   296c   Watchdog enabled
09:55:02:620   296c   Remote management (READ-ONLY MODE) is enabled on port 3333
09:55:02:620   296c   

09:55:02:620   9bc    DCR: Stratum - connecting to 'decred.usa.nicehash.com' <198.11.193.180> port 3354
09:55:02:657   9bc   send: {"id": 1, "method": "mining.subscribe", "params": ["dual 1.0"]}

09:55:02:657   9bc   send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}


09:55:02:657   9bc    DCR: Stratum - Connected (decred.usa.nicehash.com:3354)
09:55:07:637   96c   checkread timeout
09:55:07:690   9bc   checkread timeout
09:55:12:659   96c   checkread timeout
09:55:12:706   9bc   checkread timeout
09:55:17:677   96c   checkread timeout
09:55:17:724   9bc   checkread timeout
09:55:22:708   96c   checkread timeout
09:55:22:761   9bc   checkread timeout
09:55:24:177   96c   socket was closed remotely
09:55:24:177   96c   ETH: Job timeout, disconnect, retry in 20 sec...
09:55:24:240   9bc   socket was closed remotely
09:55:24:242   9bc    DCR: Job timeout, disconnect, retry in 20 sec...

[GabryRox]

Overall, very pleased with the extra DCR spead in v9.  I've had 2 6x470 rigs running it quite nicely for about a week with very few issues. Went from about 3200 DCR to 4800 on 1 rig set at -dcri 30 and about 43-4400 on the other at dcri 26 due to less PSU headroom on that rig.

Anyway, I just got a 3rd 6x470 rig going on this but it's crashed a few times, but mostly only after I went from 4 to 6 GPUs today. Still have plenty of power headroom but it could be something with those last 2 gpus i just added I suppose... still not sure.

However, what I did notice is that when I look in the log files, it's getting a ton of "DCR weak share - skip" errors. I thought maybe this is what was causing the crashes but when i checked log files on the other 2 i see similar rates of this, so still baffled as to why that 3rd rig is crashing... maybe will switch out risers tomorrow.

But... this got me to thinking... it really seems as though the improved hash-rate with v9 hasn't upped my actual DCR earning by anywhere close to the 50% is speed improvement. I thought maybe this was partially due to increasing difficulty but when I plug the numbers into WhatToMine, im coming up quite a bit shorter than I was with v8, relatively.  With v8, I was with 5-8% of what WhatToMine said, but with v9, that gap is more in the 20-25% lower range. Can I assume this is because while the hash-rate is pumped up, it's also generating many more skipped shares, so the apparent 50% increase in hash-rate is in actuality, much less than that because of the bad shares?

Just curious if anyone else is seeing this issue and if so, what are you doing to try to fix it?

[mez]

After installing the creator update for Windows 10, i get the message “ethdcrminer64.exe has stopped working“. In the details it's called “bex64“ error. Anybody out there with similar problems or ideas how to solve this? The regular ethminer.exe is still working. Sgminer is also working as usual.
Any hints are appreciated!

install new drivers

[Claymore]

Any update on other coins getting new Algo?  

I will release new version with ASM for ETH+SIA and ETH+PASCAL within several hours.

[jackbox]

Any update on other coins getting new Algo?  

I will release new version with ASM for ETH+SIA and ETH+PASCAL within several hours.

Great. Thanks!!! 

[stoleyourburger]

Hello all, and thanks Claymore for new miner version!

Though, I have a problem and hopefully one can help me about that.
I got several rigs of 3x470, 4x470 (4 GB) and 4x470 (8 GB) videocards.
After updating the Claymore ETH from 7.4 version to 9.0 I got a strange problem.
Decred increased *2, that's a fact, but hashrate of both ETH and DCR became floating. Usually my cards give 21 or 24 Mh/s (nothing is overclocked/modded, all stock) depending on whether its Asus strix 4gb or Sapphire nitro 8gb, but now once in several seconds one or two cards in the rig drops hashrate to 17-18 mh/s on eth and to 400 mhs (instead of usual 600 mhs) on dcr.
That's how Afterburner log looks like: http://img.imgland.net/aT4LZLU.png
on 7.4 there were no peaks, no nothing.
ASM is ON. If I turn ASM off - everything's fine.
But hey! Isn't it all about ASM = on and having *2 DCR increase?
Windows 7 / SSD / 16 GB Virtual RAM / Latest drivers.

If anyone has such a problem and solved it - I'd be grateful for help.

[golden0707]

Hey guys. Im confused for a long time. Been mining only eth on my 1st rig with 6*rx 470s doing 168 Mhs. Rig is on 1kw psu and consuming 860 watt at the wall. I think its about max power limit of psu but id like to do dual mining another coin as well. Could you plz answer, if i run dual mining, can i stay below 1kw power hugry situation and do more prof. then eth only? And what coin is to be ?

[Claymore]

Hello all, and thanks Claymore for new miner version!

Though, I have a problem and hopefully one can help me about that.
I got several rigs of 3x470, 4x470 (4 GB) and 4x470 (8 GB) videocards.
After updating the Claymore ETH from 7.4 version to 9.0 I got a strange problem.
Decred increased *2, that's a fact, but hashrate of both ETH and DCR became floating. Usually my cards give 21 or 24 Mh/s (nothing is overclocked/modded, all stock) depending on whether its Asus strix 4gb or Sapphire nitro 8gb, but now once in several seconds one or two cards in the rig drops hashrate to 17-18 mh/s on eth and to 400 mhs (instead of usual 600 mhs) on dcr.

Added to OP:

- AMD cards: On some Polaris cards you can notice non-constant mining speeds in dual mode when ASM mode is used; you can also see in GPU-Z that memory controller load is not constant, it drops for a few seconds.
   This issue is related to hardware and I cannot find any good workaround for now. Try to increase "-dcri" value a bit, it will reduce ETH speed a bit, but speeds will be much more stable.

[EinsteinTX]

I apologize if this has been asked before (probably has).  On dual mining Claymore software like ETH/SIA (for example), if one of my miners has 6 cards, with 2 dual mining and 4 single mining, how will I be charged? Will I be charged 2% on all six?  Or will I be charged 2% on two and 1% on four?  Thanks for your reply and patience with any redundant questions.

[Claymore]

I apologize if this has been asked before (probably has).  On dual mining Claymore software like ETH/SIA (for example), if one of my miners has 6 cards, with 2 dual mining and 4 single mining, how will I be charged? Will I be charged 2% on all six?  Or will I be charged 2% on two and 1% on four?  Thanks for your reply and patience with any redundant questions.

Added to OP (FAQ section):

As soon as you enable dual mining, devfee is 2% for all cards. But you can start two miner instances and split cards between them to get 1% on first instance and 2% on second.

[FFI2013]

Hello all, and thanks Claymore for new miner version!

Though, I have a problem and hopefully one can help me about that.
I got several rigs of 3x470, 4x470 (4 GB) and 4x470 (8 GB) videocards.
After updating the Claymore ETH from 7.4 version to 9.0 I got a strange problem.
Decred increased *2, that's a fact, but hashrate of both ETH and DCR became floating. Usually my cards give 21 or 24 Mh/s (nothing is overclocked/modded, all stock) depending on whether its Asus strix 4gb or Sapphire nitro 8gb, but now once in several seconds one or two cards in the rig drops hashrate to 17-18 mh/s on eth and to 400 mhs (instead of usual 600 mhs) on dcr.

Added to OP:

- AMD cards: On some Polaris cards you can notice non-constant mining speeds in dual mode when ASM mode is used; you can also see in GPU-Z that memory controller load is not constant, it drops for a few seconds.
   This issue is related to hardware and I cannot find any good workaround for now. Try to increase "-dcri" value a bit, it will reduce ETH speed a bit, but speeds will be much more stable.

all of my msi rx470 are running consistent but one card should I raise the dcri on that one

[Hoang152]

If you use Claymore miner, try my IOS app to monitor miner.

https://itunes.apple.com/vn/app/clays-more-monitor/id1225812443?mt=8

http://i1124.photobucket.com/albums/l565/MrHoanglee/11_zps0tcp6lpd.jpg

[Teress]

If you use Claymore miner, try my IOS app to monitor miner.

https://itunes.apple.com/vn/app/clays-more-monitor/id1225812443?mt=8

Not bad try, but shows only ETH hashrate, not dual mining DCR etc... Also second server is not showing maybe due to long length...
Time - it is not clear if it shows minutes or hours...

Can it display any notification when miner goes offline or temperature is too hot?

"Set time" you have "munites" instead of minutes

[pornluver]

I have a rig with 6 RX 480

What should driver should I use?

Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).

Obviously I can't change driver everytime I switch.

What driver should I use that's best for both?

Where can I download both of your miner? I didn't see windows version of the miner in drive link.

[TunerDude007]

I have a rig with 6 RX 480

What should driver should I use?

Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).

Obviously I can't change driver everytime I switch.

What driver should I use that's best for both?

Where can I download both of your miner? I didn't see windows version of the miner in drive link.

I use 16.9.2....believe me I've spent hours trying many drivers.

[TunerDude007]

If you use Claymore miner, try my IOS app to monitor miner.

https://itunes.apple.com/vn/app/clays-more-monitor/id1225812443?mt=8

Shit this is awesome.... Is there something like this for Android?

[Xiadas]

One little question.
Since I started using my PC to mine while I'm not playing, would a custom rom have any downsides for gaming?

The answer is no. They are faster.

[pornluver]

I have a rig with 6 RX 480

What should driver should I use?

Sometimes I mine ethash (ethereum). Sometimes I mine equihash (zcash).

Obviously I can't change driver everytime I switch.

What driver should I use that's best for both?

Where can I download both of your miner? I didn't see windows version of the miner in drive link.

I use 16.9.2....believe me I've spent hours trying many drivers.

I am using 16.9.1

I love it because I don't have to patch or bypass signature check

The thing is sometimes claymore miner just stuck in the beginning.


It recognizes all cards and that's it. It happens if I lower voltage too much.

[almirfiorio]

Dear Friends

What parameter do I use to specify the video card I want to use?

Because I just want to use the "GPU 0"

Thanks
Almir Fiorio