Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[bowjol]

testing 9.1

with dcri 1 and asm 2, hashrate not stable.very often get low hashrate.
with dcri 1 no asm 2, hashrate stable but no speed improvement over 9.0
testing rig rx 480 ref with mod bios.

[Teress]

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

[almirfiorio]

im change the claymore to 9.1

but -di option does not work

im put -di 0 in first card

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40/WORKER1/almirfiorio@gmail.com -di 0 -asm 2 -dcri 1

and -di 1 in seond card

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40 -di 1 -r 1 -eworker WORKER1 -mport 3334 -asm 2 -dcri 1

but the two cards show gpu0, see

it is normal

yes

see the commands

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40/WORKER1/almirfiorio@gmail.com -mport 0 -di 0

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40  -eworker WORKER1 -mport 0 -di 1 -r 1

You are putting a space between the -di 0. And -di 1 correct?

Is there any particular reason you are using such old version. 5.3?? Dl 9.0 or 9.1.

[GabryRox]

Hey guys. Im confused for a long time. Been mining only eth on my 1st rig with 6*rx 470s doing 168 Mhs. Rig is on 1kw psu and consuming 860 watt at the wall. I think its about max power limit of psu but id like to do dual mining another coin as well. Could you plz answer, if i run dual mining, can i stay below 1kw power hugry situation and do more prof. then eth only? And what coin is to be ?

I can't speak for Sia or Libr but for sure you will have a problem dual mining DCR with that rig as is. As an example, I have been running 2 6x470 rigs (on 1200w PSUs) and with ETH only, it pulls about 820-830W. But with ETH+DCR, it runs around 970-1000w on v9 with DCR set to 27-30.  I just built a 3rd rig and am in tweaking mode currently trying to get it to run dual effeciently. Even with DCR set to only 20, it still pulls about 940W.  Most people here recomend not exceding 85% load on your PSU.  That's why i have set my personal limit to 1kw on my 1200w PSUs (about 83%) or maybe a bit lower. Given you already at that ~85% thresshold, I would not recommend trying to dual mine with that rig... unless you are willing to turn down intensity on ETH & lower your overclocks. Even then, would probably be challenging but good luck!

[Elder III]

Hey guys. Im confused for a long time. Been mining only eth on my 1st rig with 6*rx 470s doing 168 Mhs. Rig is on 1kw psu and consuming 860 watt at the wall. I think its about max power limit of psu but id like to do dual mining another coin as well. Could you plz answer, if i run dual mining, can i stay below 1kw power hugry situation and do more prof. then eth only? And what coin is to be ?

I can't speak for Sia or Libr but for sure you will have a problem dual mining DCR with that rig as is. As an example, I have been running 2 6x470 rigs (on 1200w PSUs) and with ETH only, it pulls about 820-830W. But with ETH+DCR, it runs around 970-1000w on v9 with DCR set to 27-30.  I just built a 3rd rig and am in tweaking mode currently trying to get it to run dual effeciently. Even with DCR set to only 20, it still pulls about 940W.  Most people here recomend not exceding 85% load on your PSU.  That's why i have set my personal limit to 1kw on my 1200w PSUs (about 83%) or maybe a bit lower. Given you already at that ~85% thresshold, I would not recommend trying to dual mine with that rig... unless you are willing to turn down intensity on ETH & lower your overclocks. Even then, would probably be challenging but good luck!

I can confirm those numbers - on a 6x RX 470 rig when mining Eth + DCR I pull as much as 980 from the wall, even undervolted. Personally I chose to mine ZEC for the summer months since it sips power at <760 at the wall while staying cool and quiet. I'm using an EVGA SuperNOva 1300 watt Gold PSU.

[Claymore]

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

I don't have RX460, so probably ASM mode does not work there.

[Teress]

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

I don't have RX460, so probably ASM mode does not work there.

Any chance to make it working? Is it problem with RX460 id's or what? Can I help?

[Claymore]

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

I don't have RX460, so probably ASM mode does not work there.

Any chance to make it working? Is it problem with RX460 id's or what? Can I help?

PM me the log file (first 100 lines or so).

[Teress]

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

I don't have RX460, so probably ASM mode does not work there.

Any chance to make it working? Is it problem with RX460 id's or what? Can I help?

PM me the log file (first 100 lines or so).

PM sent...

[d57heinz]

im change the claymore to 9.1

but -di option does not work

im put -di 0 in first card

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40/WORKER1/almirfiorio@gmail.com -di 0 -asm 2 -dcri 1

and -di 1 in seond card

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40 -di 1 -r 1 -eworker WORKER1 -mport 3334 -asm 2 -dcri 1

but the two cards show gpu0, see

it is normal

yes

see the commands

EthDcrMiner64.exe -epool eth-us-east1.nanopool.org:9999 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40/WORKER1/almirfiorio@gmail.com -mport 0 -di 0

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0x4FAd3e68CEc96AfbB0457B17A46fF6896EB57E40  -eworker WORKER1 -mport 0 -di 1 -r 1

You are putting a space between the -di 0. And -di 1 correct?

Is there any particular reason you are using such old version. 5.3?? Dl 9.0 or 9.1.

Ohh well yea. Oops. Now I see what your saying. Yes that's normal because to the sw that is gpu0. If they both used same gpu second instance wouldn't mine at all   Sorry I didn't understand what you was getting at.  

BR

[Dowper]

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

What is the speed of RX460 on ETH and on ETH+DCR?

[Teress]

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

What is the speed of RX460 on ETH and on ETH+DCR?

2x RX460 get 24.1 MHs on ETH

[aarons6]

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

What is the speed of RX460 on ETH and on ETH+DCR?

2x RX460 get 24.1 MHs on ETH

each or total?

[marvykkio]

miner too unstable, too low of eth, etc,
if you use the function asm 2 with -dcri 1, pascal speed and 26 mhs, and eth speed varies, much to 22, 24, 17 mhs, not okay

[Q_R_V]

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

What is the speed of RX460 on ETH and on ETH+DCR?

2x RX460 get 24.1 MHs on ETH

each or total?

total

[yoonline]

what is the more profitability dual coin Decred/Siacoin/Lbry/Pascal to mine righ now ?

[adaseb]

what is the more profitability dual coin Decred/Siacoin/Lbry/Pascal to mine righ now ?

http://whattomine.com/coins

[yoonline]

having weird problem here my hash speed are fluctuating all the time
the rig specs:
Gigabyte Ga 990xa Ud3
sempron 145
2gb ram
windows 7
clean install

https://i.imgur.com/5BBAc5t.jpg

[almirfiorio]

the  claymore  9.1 with asm  2 and -dcri 1 are slow

low  shares and  unstable

and for you?


 

miner too unstable, too low of eth, etc,
if you use the function asm 2 with -dcri 1, pascal speed and 26 mhs, and eth speed varies, much to 22, 24, 17 mhs, not okay

[golden0707]

Hey guys. Im confused for a long time. Been mining only eth on my 1st rig with 6*rx 470s doing 168 Mhs. Rig is on 1kw psu and consuming 860 watt at the wall. I think its about max power limit of psu but id like to do dual mining another coin as well. Could you plz answer, if i run dual mining, can i stay below 1kw power hugry situation and do more prof. then eth only? And what coin is to be ?

I can't speak for Sia or Libr but for sure you will have a problem dual mining DCR with that rig as is. As an example, I have been running 2 6x470 rigs (on 1200w PSUs) and with ETH only, it pulls about 820-830W. But with ETH+DCR, it runs around 970-1000w on v9 with DCR set to 27-30.  I just built a 3rd rig and am in tweaking mode currently trying to get it to run dual effeciently. Even with DCR set to only 20, it still pulls about 940W.  Most people here recomend not exceding 85% load on your PSU.  That's why i have set my personal limit to 1kw on my 1200w PSUs (about 83%) or maybe a bit lower. Given you already at that ~85% thresshold, I would not recommend trying to dual mine with that rig... unless you are willing to turn down intensity on ETH & lower your overclocks. Even then, would probably be challenging but good luck!

Thanks for the answer. Like i thought, even with low second coin intensity , i will catch critical psu operation state. Pitty. But its life. Thank you very much again.