rpg
|
|
December 13, 2016, 05:25:10 PM |
|
In practice Flypool represents + 40% of the strength of the network so on the block number possible they will necessarily find more regularly blocks (around 8 blocks per hour on the 24 block.) And remunere your sharing number on block find, Therefore mining the right block
And dwarfpool represents + 4% of the strength of the network so on the possible block number they will not necessarily find unblock per hour (around 0.8 block per hour on the 24 block.) And remunere on the global shares so no matter if You mined the right block or not
Dwarfpool is more risky because smaller so not on to find a block in the hour but if by chance it finds 1 + 1 more it is all benefit (has to see if you prefer stability or luck)
I prefer dwarfpool which because no matter what you have miner good or bad block you will pay on your level of sharing and not as on flypool on the chance to have done as much sharing as possible on the good block
To network equivalent dwarfpool is more linear
i have 1 rig (2 rx 470 4g + 2 rx 470 8g) et 1 rig (4 rx 480 8g) on dwarfpool my ration is 0.24zec /day
Any pool regardless of size have a luck factor. The whole network has a luck factor and that's why you see the network hash going up and down, 2 second blocks and 20 minute blocks.
|
|
|
|
|
|
|
|
"Bitcoin: mining our own business since 2009" -- Pieter Wuille
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
smaxz
Sr. Member
Offline
Activity: 430
Merit: 253
VeganAcademy
|
|
December 13, 2016, 05:26:37 PM |
|
well f2pool is PPS so no luck factor there. you are payed for each share accepted.
i have had some pretty bad results with suprnova.. wish f2pool would offer SSL for those willing to suffer dev fees but concerned about MITM mitigation.
|
- NGdTwHRSdnThdi1drQuHGT3khAHRtZ1HMq -
|
|
|
kuna95
Newbie
Offline
Activity: 5
Merit: 0
|
|
December 13, 2016, 05:31:02 PM |
|
Any pool regardless of size have a luck factor. The whole network has a luck factor and that's why you see the network hash going up and down, 2 second blocks and 20 minute blocks.
I agree with you, that's why I specify that I prefer dwarfpool for its calculation of global share distribution and not on the number of share on the block
|
|
|
|
Blamsud
|
|
December 13, 2016, 05:34:19 PM |
|
well f2pool is PPS so no luck factor there. you are payed for each share accepted.
i have had some pretty bad results with suprnova.. wish f2pool would offer SSL for those willing to suffer dev fees but concerned about MITM mitigation.
Not exactly true. The payout was very low a few days ago. That is because it did not hit many blocks.
|
|
|
|
Assaro
Member
Offline
Activity: 114
Merit: 10
|
|
December 13, 2016, 05:54:18 PM |
|
Hello guys, I have a problem when mining. I am using Claymore miner and 6 RX 480 GPUs. My problem is, there will be 1 GPU not recognized or something like that. Let's make an example like: when I have 6 GPUs, GPU 3 will be mining at 0 H/s, and the console says: "GPU 3 hangs when OpenCL calls, exit". when I have 5 GPUs, one of them will behave the same, which means, GPU x will be mining at 0 H/s, "GPU x hangs when OpenCL calls, exit". I follow all the settings, put in necessary command lines, etc. I used to reboot until my rig let all the GPUs work, but now that way is not working anymore. Please help.
well there are various things to try/check.... first let us know what components you are using (mobo, ram, PSU, CPU, Win7/8/10) and what settings for the GPU (OC, voltage??) from the first shoot i would gues low virtual mem (have to be 16gb min.) or too much OC/undervolt ( as many wrote that this is the main problem by the "hanging" of the GPU).. I forgot about my components: Mobo: Biostar TB85 CPU: Intel Celeron G1840 2.8Ghz PSU: 2 x 750W OS: window 10 enterprise About paging memory, I first tried to set it up to 16GB, but now I set it to even 30~40GB, still no help, and I dont even OC it. well i would gues: 1, try to change the gpu 3 (the GPU which is hanging and loosing the hash rate to 0h/s) to the main port and plug the monitor to it, or use an dummy plug... 2, bad GPU riser (hope you are powering the risers with the molex directly to the PSU, the sata cables are dangerous and it doesnt deliver enough power to the riser which could cause the hanging..) 3, something wrong with the GPU... I would try to set up the rig with 1 gpu, if it works then add next one and try with 2 GPUs, if it works then add next one and try it with 3 until you find out which one is causing the problem.. It will take some time, but this way you can see with how much GPUs max is your rig running normal, where is the limit...) 4, dont know the mobo - so maybee it is not able to handle 6 GPUs (really dont know, try to search if some1 experienced to get it work, the mobo, with 6 gpus) dont have any amd RX, but check also here on forum what driver to use, as im using the 15.12 driver but this one is not the right one for the RX GPUs... Hope it helps.... GL
|
|
|
|
quarters
Member
Offline
Activity: 74
Merit: 10
|
|
December 13, 2016, 06:04:00 PM |
|
I'm runnin 3 r9 390's and 2 r9 390x's all of them at stock and its crashing usally. I plant my rig to the school so i can't reach it everytime. So i set intensity to -i5 and its stop crashing working like 24 hour i reset it again and then came home and I saw its crashed again Should i write a restarter batch for 1 hour periods ? (I will build a arduino for reset but i can't atm due to other stuff.) Thx in advance.
|
|
|
|
Assaro
Member
Offline
Activity: 114
Merit: 10
|
|
December 13, 2016, 06:15:17 PM |
|
US Server result:
can you please show us the .bat file config ? not sure, but are you trying to get the SSL connection or not? just asking coz Dwarf is not supporting the SSL connection at the moment.... config.txt is default my bat: setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool zec-us1.dwarfpool.com:3335 -zwal t1YbMhah7SLjVQbnQPPf5LZst9haQ7bQncE.SBNG -zpsw x -cclock 1100 -i 8 -tstop 82 -ttli 79 -mport 0
HM! after 600 rejects it start to mine as it should but if i stop miner and start it again it start to get reject response well not seeing anything wrong there, but try it with the 3333 port instead of the 3335 port... Idk how much hash power you have but the 3333 will auto adjust the vardiff maybee you have to much or not enough hash power for that port.... idk, just give it a shot Result is not better but thank you for support! well thats odd, coz have there pointed my r9 390/290 rigs and working... but some shares are taking up to 300-7000 ms also on the US server... i just saw that the -allpools 1 is missing... try to copy my setting.. ZecMiner64.exe -zpool zec-eu1.dwarfpool.com:3333 -zwal "my adress"."worker" -zpsw x -allpools 1 -i 6 -mport -3333 -tstop 76 maybee there is an hidden eror... if you figured out what was the error let me know, kinda currious gl
|
|
|
|
maxrena
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 13, 2016, 06:16:46 PM Last edit: December 13, 2016, 06:29:23 PM by maxrena |
|
Hello guys, I have a problem when mining. I am using Claymore miner and 6 RX 480 GPUs. My problem is, there will be 1 GPU not recognized or something like that. Let's make an example like: when I have 6 GPUs, GPU 3 will be mining at 0 H/s, and the console says: "GPU 3 hangs when OpenCL calls, exit". when I have 5 GPUs, one of them will behave the same, which means, GPU x will be mining at 0 H/s, "GPU x hangs when OpenCL calls, exit". I follow all the settings, put in necessary command lines, etc. I used to reboot until my rig let all the GPUs work, but now that way is not working anymore. Please help.
well there are various things to try/check.... first let us know what components you are using (mobo, ram, PSU, CPU, Win7/8/10) and what settings for the GPU (OC, voltage??) from the first shoot i would gues low virtual mem (have to be 16gb min.) or too much OC/undervolt ( as many wrote that this is the main problem by the "hanging" of the GPU).. I forgot about my components: Mobo: Biostar TB85 CPU: Intel Celeron G1840 2.8Ghz PSU: 2 x 750W OS: window 10 enterprise About paging memory, I first tried to set it up to 16GB, but now I set it to even 30~40GB, still no help, and I dont even OC it. well i would gues: 1, try to change the gpu 3 (the GPU which is hanging and loosing the hash rate to 0h/s) to the main port and plug the monitor to it, or use an dummy plug... 2, bad GPU riser (hope you are powering the risers with the molex directly to the PSU, the sata cables are dangerous and it doesnt deliver enough power to the riser which could cause the hanging..) 3, something wrong with the GPU... I would try to set up the rig with 1 gpu, if it works then add next one and try with 2 GPUs, if it works then add next one and try it with 3 until you find out which one is causing the problem.. It will take some time, but this way you can see with how much GPUs max is your rig running normal, where is the limit...) 4, dont know the mobo - so maybee it is not able to handle 6 GPUs (really dont know, try to search if some1 experienced to get it work, the mobo, with 6 gpus) dont have any amd RX, but check also here on forum what driver to use, as im using the 15.12 driver but this one is not the right one for the RX GPUs... Hope it helps.... GL Thank you for your advice, Anything related to physical touch up, like, try another riser, switch GPU, plug 1 by 1, etc, I tried them all. About GPU, I dont think that the GPU problem. You know, it's not about GPU 3 or the power, my case is like I described before When I plug 6 GPUs in, GPU 3 will hang. When I plug 5 GPUs in, GPU x will hang. There will be always 1 GPU hanging, no matter how many GPUs I plug in.
|
|
|
|
Assaro
Member
Offline
Activity: 114
Merit: 10
|
|
December 13, 2016, 06:33:12 PM |
|
Hello guys, I have a problem when mining. I am using Claymore miner and 6 RX 480 GPUs. My problem is, there will be 1 GPU not recognized or something like that. Let's make an example like: when I have 6 GPUs, GPU 3 will be mining at 0 H/s, and the console says: "GPU 3 hangs when OpenCL calls, exit". when I have 5 GPUs, one of them will behave the same, which means, GPU x will be mining at 0 H/s, "GPU x hangs when OpenCL calls, exit". I follow all the settings, put in necessary command lines, etc. I used to reboot until my rig let all the GPUs work, but now that way is not working anymore. Please help.
well there are various things to try/check.... first let us know what components you are using (mobo, ram, PSU, CPU, Win7/8/10) and what settings for the GPU (OC, voltage??) from the first shoot i would gues low virtual mem (have to be 16gb min.) or too much OC/undervolt ( as many wrote that this is the main problem by the "hanging" of the GPU).. I forgot about my components: Mobo: Biostar TB85 CPU: Intel Celeron G1840 2.8Ghz PSU: 2 x 750W OS: window 10 enterprise About paging memory, I first tried to set it up to 16GB, but now I set it to even 30~40GB, still no help, and I dont even OC it. well i would gues: 1, try to change the gpu 3 (the GPU which is hanging and loosing the hash rate to 0h/s) to the main port and plug the monitor to it, or use an dummy plug... 2, bad GPU riser (hope you are powering the risers with the molex directly to the PSU, the sata cables are dangerous and it doesnt deliver enough power to the riser which could cause the hanging..) 3, something wrong with the GPU... I would try to set up the rig with 1 gpu, if it works then add next one and try with 2 GPUs, if it works then add next one and try it with 3 until you find out which one is causing the problem.. It will take some time, but this way you can see with how much GPUs max is your rig running normal, where is the limit...) 4, dont know the mobo - so maybee it is not able to handle 6 GPUs (really dont know, try to search if some1 experienced to get it work, the mobo, with 6 gpus) dont have any amd RX, but check also here on forum what driver to use, as im using the 15.12 driver but this one is not the right one for the RX GPUs... Hope it helps.... GL Thank you for your advice, Anything related to physical touch up, like, try another riser, switch GPU, plug 1 by 1, etc, I tried them all. About GPU, I dont think that the GPU problem. You know, it's not about GPU 3 or the power, my case is like I described before When I plug 6 GPUs in, GPU 3 will hang. When I plug 5 GPUs in, GPU x will hang. There will be always 1 GPU hanging, no matter how many GPUs I plug in. always same port? maybee the port on the mobo is bad... (if it is the same port..)
|
|
|
|
maxrena
Newbie
Offline
Activity: 23
Merit: 0
|
|
December 13, 2016, 06:40:54 PM |
|
Hello guys, I have a problem when mining. I am using Claymore miner and 6 RX 480 GPUs. My problem is, there will be 1 GPU not recognized or something like that. Let's make an example like: when I have 6 GPUs, GPU 3 will be mining at 0 H/s, and the console says: "GPU 3 hangs when OpenCL calls, exit". when I have 5 GPUs, one of them will behave the same, which means, GPU x will be mining at 0 H/s, "GPU x hangs when OpenCL calls, exit". I follow all the settings, put in necessary command lines, etc. I used to reboot until my rig let all the GPUs work, but now that way is not working anymore. Please help.
well there are various things to try/check.... first let us know what components you are using (mobo, ram, PSU, CPU, Win7/8/10) and what settings for the GPU (OC, voltage??) from the first shoot i would gues low virtual mem (have to be 16gb min.) or too much OC/undervolt ( as many wrote that this is the main problem by the "hanging" of the GPU).. I forgot about my components: Mobo: Biostar TB85 CPU: Intel Celeron G1840 2.8Ghz PSU: 2 x 750W OS: window 10 enterprise About paging memory, I first tried to set it up to 16GB, but now I set it to even 30~40GB, still no help, and I dont even OC it. well i would gues: 1, try to change the gpu 3 (the GPU which is hanging and loosing the hash rate to 0h/s) to the main port and plug the monitor to it, or use an dummy plug... 2, bad GPU riser (hope you are powering the risers with the molex directly to the PSU, the sata cables are dangerous and it doesnt deliver enough power to the riser which could cause the hanging..) 3, something wrong with the GPU... I would try to set up the rig with 1 gpu, if it works then add next one and try with 2 GPUs, if it works then add next one and try it with 3 until you find out which one is causing the problem.. It will take some time, but this way you can see with how much GPUs max is your rig running normal, where is the limit...) 4, dont know the mobo - so maybee it is not able to handle 6 GPUs (really dont know, try to search if some1 experienced to get it work, the mobo, with 6 gpus) dont have any amd RX, but check also here on forum what driver to use, as im using the 15.12 driver but this one is not the right one for the RX GPUs... Hope it helps.... GL Thank you for your advice, Anything related to physical touch up, like, try another riser, switch GPU, plug 1 by 1, etc, I tried them all. About GPU, I dont think that the GPU problem. You know, it's not about GPU 3 or the power, my case is like I described before When I plug 6 GPUs in, GPU 3 will hang. When I plug 5 GPUs in, GPU x will hang. There will be always 1 GPU hanging, no matter how many GPUs I plug in. always same port? maybee the port on the mobo is bad... (if it is the same port..) No, when I have 5 GPUs in, that means I take that GPU 3 out, just left 5 on the rig, at that time, another GPU will hang.
|
|
|
|
smaxz
Sr. Member
Offline
Activity: 430
Merit: 253
VeganAcademy
|
|
December 13, 2016, 07:09:07 PM |
|
well f2pool is PPS so no luck factor there. you are payed for each share accepted.
i have had some pretty bad results with suprnova.. wish f2pool would offer SSL for those willing to suffer dev fees but concerned about MITM mitigation.
Not exactly true. The payout was very low a few days ago. That is because it did not hit many blocks. not sure you are unfamiliar with what PPS means, or if this is a troll from a low activity shill account. PPS means there are constant calculations against difficulty and share size so each submission is rewarded minus the pool fee. regardless of how many blocks the pool scores. you are Paid Per Share. all these people "counting shares" on dwarf and flypool should simply check difficulty charts for a given day and pull up a calculator for what they should be pulling in. their counted shares mean nothing if payout is sub optimal. if you're not being rewarded at least .08 ZEC per 1000h/s these past few days, even after fees.. you're getting bent over pretty bad. 0.1 ZEC per 1000h/s is more like it after some modest dev and pool fees.
|
- NGdTwHRSdnThdi1drQuHGT3khAHRtZ1HMq -
|
|
|
dragonchopper9
|
|
December 13, 2016, 07:30:35 PM |
|
Coinmine and Suprnova are by far much open with their statistics and support is fine, dunno why I should use other pools.
I would not use this pools, esp after they delayed payment at start of mining zcash
|
|
|
|
enricosofie
Newbie
Offline
Activity: 47
Merit: 0
|
|
December 13, 2016, 07:34:36 PM |
|
Hi,
Is it possible to have and r9 290 and a RX480 in the same computer?
regards, eric
|
|
|
|
SB73
Newbie
Offline
Activity: 14
Merit: 0
|
|
December 13, 2016, 07:37:32 PM |
|
well thats odd, coz have there pointed my r9 390/290 rigs and working... but some shares are taking up to 300-7000 ms also on the US server... i just saw that the -allpools 1 is missing... try to copy my setting.. ZecMiner64.exe -zpool zec-eu1.dwarfpool.com:3333 -zwal "my adress"."worker" -zpsw x -allpools 1 -i 6 -mport -3333 -tstop 76 maybee there is an hidden eror... if you figured out what was the error let me know, kinda currious gl I've tried your settings and -allpools 1 too.. Result is the same. ;-( But when i try to run miner on direct internet connection - everything is ok! When i run it through ssh tunnel (key factor) i have a problems i've described ealier ;-( i have a problem only when i run miner through ssh tunnel.. unfortunately i have no direct internet connection in my place :-( BTW thank you for efforts to help me.
|
|
|
|
vapourminer
Legendary
Offline
Activity: 4326
Merit: 3536
what is this "brake pedal" you speak of?
|
|
December 13, 2016, 07:42:00 PM |
|
Is it possible to have and r9 290 and a RX480 in the same computer?
yes
|
|
|
|
|
ciombat
Newbie
Offline
Activity: 18
Merit: 0
|
|
December 13, 2016, 07:58:01 PM |
|
anybody with r9 fury? Can you please share your results with v9.1?
|
|
|
|
shadabahmed
|
|
December 13, 2016, 08:06:52 PM |
|
Hi,
Is it possible to have and r9 290 and a RX480 in the same computer?
regards, eric
yes, and i am using 4 diffrent cards in same MOBO
|
Am I spamming? Report me!
|
|
|
marcus1986
|
|
December 13, 2016, 08:14:37 PM |
|
Hi,
Is it possible to have and r9 290 and a RX480 in the same computer?
regards, eric
Absolutely no problem with that.
|
|
|
|
Densitymax
|
|
December 13, 2016, 08:22:23 PM |
|
Hi,
Is it possible to have and r9 290 and a RX480 in the same computer?
regards, eric
First versions of miner had problems with it, but now everything is fine!
|
|
|
|
|