Zimmsquad
Member
Offline
Activity: 108
Merit: 10
|
|
March 06, 2017, 04:40:22 PM |
|
TDP 60% (110w per card)
At that clock - this is impossible, are you measuring that at the wall? His cards have a higher max tdp than 150W so yes it is possible I am pretty sure his cards are EVGA GTX 1070 FTW, which have two 8 pin power cables
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
March 06, 2017, 05:58:12 PM |
|
TDP 60% (110w per card)
At that clock - this is impossible, are you measuring that at the wall? Yes as i listed in my post, i have 60x EVGA FTW 1070 card, those have higher max wattage and come with 2x 8pin power input, so the tdp reading aren't the same as other 1070, i use nvidia-smi to give the watt used, so it doesn't count the psu efficiency or the system. For reference my whole system @ wall is 830w, counting psu efficiency the gpu's must be around 700w, the rest is the system (that correspond to what i read when i don't mine @ boot) current nvidia-smi reading Power Readings
Power Draw : 113.22 W (current) Power Limit : 111.00 W (limit 60%) Default Power Limit : 185.00 W (100%) Enforced Power Limit : 111.00 W (current limit) Min Power Limit : 92.50 W (50%) Max Power Limit : 208.00 W (112%) +-----------------------------------------------------------------------------+ | NVIDIA-SMI 378.49 Driver Version: 378.49 | |-------------------------------+----------------------+----------------------+ | GPU Name TCC/WDDM | Bus-Id Disp.A | Volatile Uncorr. ECC | | Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. | |===============================+======================+======================| | 0 GeForce GTX 1070 WDDM | 0000:01:00.0 Off | N/A | | 34% 64C P2 112W / 111W | 831MiB / 8192MiB | 99% Default | +-------------------------------+----------------------+----------------------+ | 1 GeForce GTX 1070 WDDM | 0000:02:00.0 Off | N/A | | 29% 62C P2 111W / 111W | 779MiB / 8192MiB | 99% Default | +-------------------------------+----------------------+----------------------+ | 2 GeForce GTX 1070 WDDM | 0000:03:00.0 Off | N/A | | 34% 64C P2 110W / 111W | 779MiB / 8192MiB | 99% Default | +-------------------------------+----------------------+----------------------+ | 3 GeForce GTX 1070 WDDM | 0000:04:00.0 Off | N/A | | 35% 64C P2 110W / 111W | 779MiB / 8192MiB | 99% Default | +-------------------------------+----------------------+----------------------+ | 4 GeForce GTX 1070 WDDM | 0000:05:00.0 Off | N/A | | 32% 63C P2 110W / 111W | 779MiB / 8192MiB | 99% Default | +-------------------------------+----------------------+----------------------+ | 5 GeForce GTX 1070 WDDM | 0000:06:00.0 Off | N/A | | 33% 63C P2 112W / 111W | 779MiB / 8192MiB | 99% Default | +-------------------------------+----------------------+----------------------+ +-----------------------------------------------------------------------------+ | Processes: GPU Memory | | GPU PID Type Process name Usage | |=============================================================================| | 0 252 C+G C:\Windows\System32\dwm.exe N/A | | 0 3332 C+G C:\Windows\explorer.exe N/A | | 0 4316 C+G ...ost_cw5n1h2txyewy\ShellExperienceHost.exe N/A | | 0 4488 C+G ...indows.Cortana_cw5n1h2txyewy\SearchUI.exe N/A | | 0 6388 C C:\MINING\MINING-APP\EWBF-ZEC-ZCL\miner.exe N/A | | 1 6388 C C:\MINING\MINING-APP\EWBF-ZEC-ZCL\miner.exe N/A | | 2 6388 C C:\MINING\MINING-APP\EWBF-ZEC-ZCL\miner.exe N/A | | 3 6388 C C:\MINING\MINING-APP\EWBF-ZEC-ZCL\miner.exe N/A | | 4 6388 C C:\MINING\MINING-APP\EWBF-ZEC-ZCL\miner.exe N/A | | 5 6388 C C:\MINING\MINING-APP\EWBF-ZEC-ZCL\miner.exe N/A | +-----------------------------------------------------------------------------+
|
|
|
|
kell234
Newbie
Offline
Activity: 17
Merit: 0
|
|
March 06, 2017, 06:16:13 PM Last edit: March 06, 2017, 06:57:34 PM by kell234 |
|
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
March 06, 2017, 07:06:59 PM |
|
gtx 1070 - 500+ sol/s More like 480 per card since your other is doing 455 but nice numbers !
|
|
|
|
kell234
Newbie
Offline
Activity: 17
Merit: 0
|
|
March 06, 2017, 07:08:47 PM |
|
One Zotac EXtream and heavy overclocked (micron memory with patched Bios), second just AMP and can only 1900 / 4300
|
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
March 06, 2017, 07:53:34 PM |
|
One Zotac EXtream and heavy overclocked (micron memory with patched Bios), second just AMP and can only 1900 / 4300
Ah i see, this extreme isn't bad at all indeed ! how did you patched bios ? i though it wasn't possible for nvidia's, could you give more infos ?
|
|
|
|
kell234
Newbie
Offline
Activity: 17
Merit: 0
|
|
March 06, 2017, 08:00:24 PM |
|
it's was problem with gtx1070 with micron memory (unstable timing when overclocked). So all vendors make new bios for 1070 with micron (it's give more stable memry overclock only), it's not spesial bios for mining.
|
|
|
|
Bulletdodger
|
|
March 06, 2017, 08:02:58 PM |
|
Yeah, I'm interested as well. Mad results. Ps my KFA2 1070 today wont overclock core one bit :/
It's stuck at 1518 mhz, I tried 3 tools and numerous resets, usually I run it around 2000 mhz core clock and 4000 mhz memory clock (msi afterburner) and it works fine, but this morning I had a power outage while I was out and I just cant overclock it no more... Very weird.
|
_
|
|
|
m1n1ngP4d4w4n
Full Member
Offline
Activity: 224
Merit: 100
CryptoLearner
|
|
March 06, 2017, 08:04:45 PM |
|
it's was problem with gtx1070 with micron memory (unstable timing when overclocked). So all vendors make new bios for 1070 with micron (it's give more stable memry overclock only), it's not spesial bios for mining.
Ohhh ok it's the fixed micron bios, yeah i had to patch mine too Still im surprised you can OC it this much does it run stable for days ?
|
|
|
|
reb0rn21
Legendary
Offline
Activity: 1901
Merit: 1024
|
|
March 06, 2017, 08:16:31 PM |
|
Patched Gainwards (palit) bliss (micron) can do 100% stable at +700 afterburner (P2 state 2250Mhz)... and +800 on ETH (2300Mhz) samsung 2350-2400mhz on ETH, MSI patched micron can not (max 2175mhz), it depend on card brand, maybe some card have more memory voltage
|
|
|
|
sublimus
|
|
March 06, 2017, 10:38:04 PM |
|
Is this good with Asus GTX 1060? I don't know how to moddify bios. Can anyone help me? Looks ok. What is the problem?
|
|
|
|
sublimus
|
|
March 06, 2017, 10:45:05 PM |
|
gtx 1070 - 500+ sol/s Low temp do much good for efficency.
|
|
|
|
Newuser16
Newbie
Offline
Activity: 18
Merit: 0
|
|
March 06, 2017, 10:51:12 PM |
|
Hello Anyone can suggest how to get the best performance out of GTX 1080? I have no experience with these things. Please help me optimize my GPU to get the best out of it without killing it!! This is where I'm at the moment 540 sol/s using one GTX 1080 and using 0.3.1b http://i65.tinypic.com/j61yl2.png
|
|
|
|
jiggytom
Legendary
Offline
Activity: 1068
Merit: 1020
|
|
March 07, 2017, 02:39:18 AM |
|
Hello Anyone can suggest how to get the best performance out of GTX 1080? I have no experience with these things. Please help me optimize my GPU to get the best out of it without killing it!! This is where I'm at the moment 540 sol/s using one GTX 1080 and using 0.3.1b that's pretty good for 1080 overclocked. If you have high energy rates, then consider tweaking the power limit to hit a better performance/cost ratio.
|
BTC: 174MGp3R5prNbuen31Kx5G5XuyuAXu9jye LBC: bWYN8NXGKWsgEAd6tQnJ5YRo2Z4r6PjxBH
|
|
|
thesavoyard
|
|
March 07, 2017, 07:55:46 AM |
|
Hello Anyone can suggest how to get the best performance out of GTX 1080? I have no experience with these things. Please help me optimize my GPU to get the best out of it without killing it!! This is where I'm at the moment 540 sol/s using one GTX 1080 and using 0.3.1b Putting the temp limit to 71 should be safe. make sure it has lots of airflow. I could run my gtx 1070 at max and it'd never go above 68 in the Antek 900, when I built an open air rig and put a fan on them, I have to set the temp limit or it'll raise to 78.
|
|
|
|
granrus
Newbie
Offline
Activity: 21
Merit: 0
|
|
March 08, 2017, 05:11:55 AM |
|
Why miner contan backdoor? idp.generic d6d120877a9c.3.2 (Avast)
|
|
|
|
ulfsaar
|
|
March 08, 2017, 06:44:03 AM |
|
@EWBF. you miner really good. using it long time. question: when you put option no fee? already paid many coins to you. just show some love to me and i give more love to you. you like that?
|
|
|
|
sublimus
|
|
March 08, 2017, 08:30:07 AM |
|
Why miner contan backdoor? idp.generic d6d120877a9c.3.2 (Avast)
Because it doesnt like frontdoors.
|
|
|
|
EWBF_ (OP)
|
|
March 08, 2017, 11:25:58 AM |
|
@EWBF. you miner really good. using it long time. question: when you put option no fee? already paid many coins to you. just show some love to me and i give more love to you. you like that? Yes, i will add option "fee" which will allow you set devFee manually for example --fee 0 is no fee --fee 1 is 1% etc. This option will be added in version 0.3.3b and released around march 20th.
|
|
|
|
thesavoyard
|
|
March 08, 2017, 12:37:35 PM |
|
@EWBF. you miner really good. using it long time. question: when you put option no fee? already paid many coins to you. just show some love to me and i give more love to you. you like that? Yes, i will add option "fee" which will allow you set devFee manually for example --fee 0 is no fee --fee 1 is 1% etc. This option will be added in version 0.3.3b and released around march 20th. Aren't you worried people will just set it to 0? Maybe just lower it to 1% or 1/2%, the increased adoption will probably even out in the end.
|
|
|
|
|