minerstat: mining OS + ASIC monitoring + Windows mining

[SoeLak]

hello coinscrow, may I ask you a little help? How to renew my donor tier? I want to take Tier 0, I already sent 0.0044 BTC to minerstat address, its already 1000+ confirmation but my current balance still 0, therefore I can't activate Tier 0. What should I do now?
Thank you in advance.

Yes, i found your transaction. So, i solved your problem, your again Tier 0.  

Thank you very much sir..

[1714865031]

1714865031

[coinscrow]

Is anyone else having issues getting Dual Mining up and running? I cannot enable it in settings, if i go to settings>algorithm settings I am able to select enable for claymore-dual but it goes back to disabled when I click save, same thing happens in dual mining settings. If I enter hashrates and DCRI and click save it vapes out everything i typed in and goes to default.

Only problem can be your Worker name, use casual names like:

Rig1
RX480_Left
HomeRig
rig001
01
1

[pornluver]

Extended view has issues

This is what I found on extended views



It says I am mining XMR. I don't. I am mining ethererum. The

clasicall few is correct



Also, I only see temperature in GPU 0. How can I see temperature for all GPU?

[pornluver]

How do I have public page like

https://minerstat.com/public/coinscrow.html

Also we uses your watttool feature. Our watttool have these indexes by the way:

GPU-z   Wattool   Watttool Index   PCI-e   Claymore   zecminer   power   voltage   mem voltage   
0   4   20   1   4   4      910   900   samsung
1   0   0   0   1   1   75   910   900   samsung
2   2   8   2   5   5      910   900   
3   3   14   3   2   2      910   900   
4   1   2   4   3   3      910   900   
5   5   36   5   0   0      910   900   

I saw 0.ini 6.ini 12.ini 18.ini 24.ini and 30.ini downloaded.

Well, that's not the actual number that shows up if I open wattool.

So how do I reconcile those numbers?

[coinscrow]

Extended view has issues

This is what I found on extended views

...

It says I am mining XMR. I don't. I am mining ethererum. The

clasicall few is correct

...

Also, I only see temperature in GPU 0. How can I see temperature for all GPU?

Thank you, i check it now. GPU datas sent by OHM. (Open Hardware Monitor)

How do I have public page like

https://minerstat.com/public/coinscrow.html

Also we uses your watttool feature. Our watttool have these indexes by the way:

GPU-z   Wattool   Watttool Index   PCI-e   Claymore   zecminer   power   voltage   mem voltage   
0   4   20   1   4   4      910   900   samsung
1   0   0   0   1   1   75   910   900   samsung
2   2   8   2   5   5      910   900   
3   3   14   3   2   2      910   900   
4   1   2   4   3   3      910   900   
5   5   36   5   0   0      910   900   

I saw 0.ini 6.ini 12.ini 18.ini 24.ini and 30.ini downloaded.

Well, that's not the actual number that shows up if I open wattool.

So how do I reconcile those numbers?

Settings >> Public Profile
Same like in WattTool program, by GPU id. 0 is 0 on the website to.

SOME NEWS ABOUT THE NEW CLIENT!!
- No more console UI.
- This is not the final version, i just testing.
- Come soon with another improvements.

[pornluver]

Hello can I change url of my public profile?

My current one is

https://minerstat.com/public/jimtom.html

[pornluver]

Extended view has issues

This is what I found on extended views

...

It says I am mining XMR. I don't. I am mining ethererum. The

clasicall few is correct

...

Also, I only see temperature in GPU 0. How can I see temperature for all GPU?

Thank you, i check it now. GPU datas sent by OHM. (Open Hardware Monitor)

How do I have public page like

https://minerstat.com/public/coinscrow.html

Also we uses your watttool feature. Our watttool have these indexes by the way:

GPU-z   Wattool   Watttool Index   PCI-e   Claymore   zecminer   power   voltage   mem voltage   
0   4   20   1   4   4      910   900   samsung
1   0   0   0   1   1   75   910   900   samsung
2   2   8   2   5   5      910   900   
3   3   14   3   2   2      910   900   
4   1   2   4   3   3      910   900   
5   5   36   5   0   0      910   900   

I saw 0.ini 6.ini 12.ini 18.ini 24.ini and 30.ini downloaded.

Well, that's not the actual number that shows up if I open wattool.

So how do I reconcile those numbers?

Settings >> Public Profile
Same like in WattTool program, by GPU id. 0 is 0 on the website to.

SOME NEWS ABOUT THE NEW CLIENT!!
- No more console UI.
- This is not the final version, i just testing.
- Come soon with another improvements.

What do you mean by GPU id?

Our watttool have these GPU "indexes"
20
0
8
14
2
36

It corresponds to GPU

4
1
5
2
3
0

in claymore

It corresponds to
Gpu number
0
1
2
3
4
5

in GPUz.

I saw 6.ini downloaded. However, there is no GPU in our rig with index 6. We have 0, 2, 8, 14, 20, 36. And it changes from one rig to another, though the sequence is always the same.

Here, let me show you the watttool screenshot of mine

[coinscrow]

Hello can I change url of my public profile?

My current one is

https://minerstat.com/public/jimtom.html

Only once you can change the profile url. RANDOM to UNIQE, if you want to change send me a message with
ACCESSKEY
NEW URL

What do you mean by GPU id?

Our watttool have these GPU "indexes"
20
0
8
14
2
36

It corresponds to GPU

4
1
5
2
3
0

in claymore

It corresponds to
Gpu number
0
1
2
3
4
5

in GPUz.

I saw 6.ini downloaded. However, there is no GPU in our rig with index 6. We have 0, 2, 8, 14, 20, 36. And it changes from one rig to another, though the sequence is always the same.

6.ini just created by the server. 6 gpu ini.
it means 36 index, but to be clear i will add option to change indexes on the website by yourself

[pornluver]

My indexes at watttool is

20
0
8
14
2
36

It seems that hardware monitor uses the exact same indexes watttool uses.

That's probably why you cannot detect my GPU temperatures

https://minerstat.com/public/jimtom.html

Your program search for temperature of GPU with index 24, for example, and there is no GPU with 24 index. The only matching GPU is the one with 0 index.

Your system always download 0.ini, 6.ini, 12.ini, 18.ini, 24.ini, and 30.ini

I think most of your users do not have watttool with those indexes.

I opened watttool directory and I found this in 6.ini

[General]
NoGUI=1
[Adapter]
Index=6
[GPU]
Mode=Manual
P1_CLK=608
P1_VID=818
P2_CLK=910
P2_VID=837

So the watttool profile that is sent from your server has index 6. But there is no card with index 6 on my card.

is there a way to change my watttool index so that it match your indexes?

Or, do other people, for some reasons, have the same watttool indexes like you? 0, 6,12,18,24,30? I got 2 rigs and the number always differ. I wonder what the trick is to get such neat numbers 0,2,4,6,8,24 or 0,2,8,14,20,36

I wonder where you store those inis? Maybe I can see what's in it and check the issue.

[coinscrow]

My indexes at watttool is

20
0
8
14
2
36

It seems that hardware monitor uses the exact same indexes watttool uses.

That's probably why you cannot detect my GPU temperatures

https://minerstat.com/public/jimtom.html

Your program search for temperature of GPU with index 24, for example, and there is no GPU with 24 index. The only matching GPU is the one with 0 index.

Your system always download 0.ini, 6.ini, 12.ini, 18.ini, 24.ini, and 30.ini

I think most of your users do not have watttool with those indexes.

I opened watttool directory and I found this in 6.ini

[General]
NoGUI=1
[Adapter]
Index=6
[GPU]
Mode=Manual
P1_CLK=608
P1_VID=818
P2_CLK=910
P2_VID=837

So the watttool profile that is sent from your server has index 6. But there is no card with index 6 on my card.

is there a way to change my watttool index so that it match your indexes?

Or, do other people, for some reasons, have the same watttool indexes like you? 0, 6,12,18,24,30? I got 2 rigs and the number always differ. I wonder what the trick is to get such neat numbers 0,2,4,6,8,24 or 0,2,8,14,20,36

I wonder where you store those inis? Maybe I can see what's in it and check the issue.

Good to know that, i will add option to manual edit the GPU ids. Thank you

[coinscrow]

v2.9  COMES WITHIN 24 HOUR!
- WattTool improvements
- Nvidia impovements
- New Graphics UI
- and some new stuff..

changelog tomorrow.

[twan69666]

New client looks good.

Since the Decred update, the mining stats for DCR on the Yiimp (yiimp.ccminer.org:3252) pool just show as ($ inva). Any chance you could update that?

[coinscrow]

New client looks good.

Since the Decred update, the mining stats for DCR on the Yiimp (yiimp.ccminer.org:3252) pool just show as ($ inva). Any chance you could update that?

I added better miningpoolhub and Yiimp support. Now must be work.

[twan69666]

New client looks good.

Since the Decred update, the mining stats for DCR on the Yiimp (yiimp.ccminer.org:3252) pool just show as ($ inva). Any chance you could update that?

I added better miningpoolhub and Yiimp support. Now must be work.

That worked! Thanks!

[bel123]

any eta for linux version?

Nice tool. Good job!

[Jamievs]

Awesome man, I am looking forward to the update!

[gmx2000]

Posted From bitcointalk.org Android App

[olaf_d]

any eta for linux version?

Nice tool. Good job!

30-45 days. I am anxiously waiting, too.

[toptek]

TESTIMONTALS
_________________________________________________

Reseting etc. work as it should. This is awesome little tool and it's free

I recommend this to everyone !

Bravo @coinscrow

good job, thanks for your work

Cant say it enough man, you rock.  This tool is turning out to be a great all in 1, especially for us peeps that have nvidia

Donation
_________________________________________________
If you like it, help me to bring this project to the next level..

BTC:

Code:

1LXcth7SuXE7rXac4sJwALdCcovSYooJ7y

ZEC:

Code:

t1MGMoah3jueaQfAzonah5ZQrohUY7ASY8N

ETH (min 1 - Poloniex):

Code:

0xd3f3557f3b32c618c74477cfa1e41fe741d344ad

XMR:

Code:

Payment ID: 7b377339f893c8bb88ae83f9c261828c8b1a7d144590bdc46cbb7a096e453e26
Deposit Address: 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGRoyZk3ES1s1V4QVcB

PASC:

Code:

Payload: 85f402c3abfb23f2
Deposit Address: 86646-64

USDT:

Code:

1HjHBAWdc7BuUGBMpPN83R94xWEPGaP4Zj

ETC (min 1):

Code:

0x528c9bc4629250132d75232cca676d25c2b7f895

can i use either the ZEC or ETH  address to donate for a 3 month 10 Dollar plan for now , till I see how far you all go and how long you last .. which I hope is forever, I Like what i see and waiting for the Linux version so i can put my PI's to use for the monitor part under Linux if it works, that way .

in time , I will end up paying for the life time thing, but for now, I'll take it slow ..

why with ZEC or ETH less hassle using those coins so far no major wallet issue to deal with ..

Or even PayPal, I'll take a risk and send the cash as friends and family so there is no fee just be in the USA for the no fee .... or have a USA account ..

[olaf_d]

can i use either the ZEC or ETH  address to donate for a 3 month 10 Dollar plan for now , till I see how far you all go and how long you last .. which I hope is forever, I Like what i see and waiting for the Linux version so i can put my PI's to use for the monitor part under Linux if it works, that way .

in time , I will end up paying for the life time thing, but for now, I'll take it slow ..

why with ZEC or ETH less hassle using those coins so far no major wallet issue to deal with ..

Or even PayPal, I'll take a risk and send the cash as friends and family so there is no fee just be in the USA for the no fee .... or have a USA account ..

Why not just use shapeshift and send the BTC to your donate address?