Jamievs
|
|
June 03, 2017, 06:30:42 PM |
|
Am I the only one were the pool / wallet info does not end up in the claymore config file? It is like the "( )" tags are not working. Doesn't work for me too. config.txt have no values. yes, thats i wrote upper. I you need to use this or autoupdate. https://github.com/coinscrow/minerstat-windows/releases/tag/2.9.1.0the config.txt not downloaded from the server, this in the package, the autoupdate create a backup file than replace. The 2.9.0.1 rewrote the backup file to dump. Thats will be good No you misunderstand. It does get the file but everything in the file is empty. This is my config setting in the portal now; -eworker (WORKER) -epool exp-eu.dwarfpool.com:8018 -ewal 0x3ec1c5c390f8a63b852f85f79e7e2354a4d92a79 -epsw x -dpool eu.siamining.com:7777 -dcoin SC -dwal 00ee4e3d423fcb4bc7c5335e653a97dcd2599b9df2ceabbd11b9d4f3168a2818bc63de483668 -dpsw x -mode 0 -dcri 19 -cvddc 900 -mclock 1950 -fanmin 80 -allcoins 1 And this is the config file the node downloads; -eworker Rig5 -epool exp-eu.dwarfpool.com:8018 -ewal 0x3ec1c5c390f8a63b852f85f79e7e2354a4d92a79 -epsw x -dpool eu.siamining.com:7777 -dcoin SC -dwal 00ee4e3d423fcb4bc7c5335e653a97dcd2599b9df2ceabbd11b9d4f3168a2818bc63de483668 -dpsw x -mode 0 -dcri 19 -cvddc 900 -mclock 1950 -fanmin 80 -allcoins 1 So all seems good. Now I Set it all back to default. So my portal settings look like this; -eworker (WORKER) -epool (1_COIN_POOL) -ewal (1_COIN_ADDRESS) -epsw x -dpool (2_COIN_POOL) -dcoin (2_COIN) -dwal (2_COIN_ADDRESS) -dpsw x -mode 0 -dcri (DCRI) -cvddc 900 -mclock 1950 -fanmin 80 -allcoins 1 And now this file is the config in the claymore folder; -eworker Rig5 -epool -ewal -epsw x -dpool -dcoin -dwal -dpsw x -mode 0 -dcri -cvddc 900 -mclock 1950 -fanmin 80 -allcoins 1 See?? Only the eworker gets pulled into the file. Any other info is not there.
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
magicsys.nw
Newbie
Offline
Activity: 66
Merit: 0
|
|
June 03, 2017, 06:32:43 PM |
|
Only 7 gpu in stat. Need more, 9 will be nice.
|
|
|
|
money1
Newbie
Offline
Activity: 29
Merit: 0
|
|
June 03, 2017, 06:36:33 PM |
|
And now this file is the config in the claymore folder;
-eworker Rig5 -epool -ewal -epsw x -dpool -dcoin -dwal -dpsw x -mode 0 -dcri -cvddc 900 -mclock 1950 -fanmin 80 -allcoins 1
See?? Only the eworker gets pulled into the file. Any other info is not there.
Have same problem, claymore-eth config has no values.
|
|
|
|
coinscrow (OP)
|
|
June 03, 2017, 06:44:15 PM |
|
update done, but still can't get it working. node version 2.9.1.0 but first says that no wattool configs found, but i have them. took a look in claymore-eth config file and there is no pools, no wallets etc. listed.
Thank you for your report, it was a server side mistake. Now will work Only 7 gpu in stat. Need more, 9 will be nice.
I will upgrade to 13+ GPU support, because the new Ascrock motherboard will support it
|
|
|
|
adnanelgalla
Newbie
Offline
Activity: 8
Merit: 0
|
|
June 03, 2017, 09:29:25 PM |
|
update done, but still can't get it working. node version 2.9.1.0 but first says that no wattool configs found, but i have them. took a look in claymore-eth config file and there is no pools, no wallets etc. listed.
Thank you for your report, it was a server side mistake. Now will work Only 7 gpu in stat. Need more, 9 will be nice.
I will upgrade to 13+ GPU support, because the new Ascrock motherboard will support it Still having problems with new rigs not showing up in the config editor
|
|
|
|
coinscrow (OP)
|
|
June 03, 2017, 09:55:05 PM |
|
update done, but still can't get it working. node version 2.9.1.0 but first says that no wattool configs found, but i have them. took a look in claymore-eth config file and there is no pools, no wallets etc. listed.
Thank you for your report, it was a server side mistake. Now will work Only 7 gpu in stat. Need more, 9 will be nice.
I will upgrade to 13+ GPU support, because the new Ascrock motherboard will support it Still having problems with new rigs not showing up in the config editor Fixed. Also, i'll improve the new rigs. The new config addresses will auto loaded from the the address editor, not need to change my addresses just, working with yours. I will write a post about if its ready.
|
|
|
|
insaniak
|
|
June 04, 2017, 12:23:23 AM |
|
I Lost my workers with my api is this normal?
|
|
|
|
|
insaniak
|
|
June 04, 2017, 02:07:41 AM |
|
What happens to my old API? I had set up with my miners
|
|
|
|
coinscrow (OP)
|
|
June 04, 2017, 07:01:29 AM |
|
What happens to my old API? I had set up with my miners i dont know what you think
|
|
|
|
coinscrow (OP)
|
|
June 04, 2017, 11:57:41 AM |
|
Minerstat API is updated! - New PHP Example. - Updated JSON. Current rate: 2 request / 1 IP / 1 sec (Will be higher) https://github.com/coinscrow/minerstat-apiUpcoming: - Revenue Chart - Hashrate Down Notification - Improved Hashrate Chart (H, KH, MH, GH view)
|
|
|
|
FRK
Newbie
Offline
Activity: 15
Merit: 0
|
|
June 05, 2017, 11:41:54 AM |
|
I cannot login anymore. If I enter my passkey and click login, it will redirect me to the homepage without logging in.
|
|
|
|
coinscrow (OP)
|
|
June 05, 2017, 11:43:22 AM |
|
I cannot login anymore. If I enter my passkey and click login, it will redirect me to the homepage without logging in.
where ? main page ? mobile ? application?
|
|
|
|
br2459
|
|
June 05, 2017, 04:48:33 PM |
|
Any plans to add Zen to the list? Its on Coinmarket Cap.
|
|
|
|
|
|
br2459
|
|
June 05, 2017, 06:23:36 PM |
|
Hmm.. mine still shows I am mining ETH when it is actually ZEN. Does it have anything to do with the pool your mining to? I am using http://pool.miningspeed.com/ instead of Suprnova.. All nodes are up to date as well.
|
|
|
|
Liquid71
|
|
June 05, 2017, 08:38:09 PM |
|
Dude those colors are atrocious ! Can you please use a color palette which looks professional?
dude gives you software to make your life easier and you order him around like he's your servant
|
|
|
|
coinscrow (OP)
|
|
June 06, 2017, 12:24:51 AM |
|
Hmm.. mine still shows I am mining ETH when it is actually ZEN. Does it have anything to do with the pool your mining to? I am using http://pool.miningspeed.com/ instead of Suprnova.. All nodes are up to date as well. The database didn't know this pool, now will work!
|
|
|
|
br2459
|
|
June 06, 2017, 12:39:37 AM |
|
Hmm.. mine still shows I am mining ETH when it is actually ZEN. Does it have anything to do with the pool your mining to? I am using http://pool.miningspeed.com/ instead of Suprnova.. All nodes are up to date as well. The database didn't know this pool, now will work! Awesome! Thank you for getting it fixed!
|
|
|
|
|