g0re79
|
|
March 26, 2014, 05:28:43 PM |
|
Strange thing... Now bot reporting LTC/BTC price like 0.0000 - show only 4 digits after comma if price is 0.0286 its ok, but if price 0.02865, bot reports 0.0287 or if price 0.02854, bot reports 0.0286 its imposible for trading Same for me on Cex.IO - price per 1 GHS is 0.0105xxxx and that twisting xxxx is where you can make some profit due to 0% fee. Now not..
|
|
|
|
controls
Newbie
Offline
Activity: 13
Merit: 0
|
|
March 26, 2014, 06:54:56 PM |
|
<sigh> george is gettin' mad... HOURS to load enough chart data to run alts on cryptsy and minutes after I activate bots I keep getting this: https://i.imgur.com/rAQNhi4.jpgThis is a new problem, last version would just crash properly. I haven't been able to run a trading bot for more than a few minutes at a time since the last update. Same errors here.
|
|
|
|
solarion
|
|
March 27, 2014, 07:55:44 AM |
|
This is the worst version yet for me, I can't even use the program since updating.
|
|
|
|
Stephan224 (OP)
|
|
March 27, 2014, 11:46:40 AM |
|
Recently we have started a test on the new update, this test has gone well. We got back 4 bug reports of some small issues that are solved by now. Today we will create another test version and if that version solves the 4 reported bugs then the update will be released.
We are expecting to launch the update tomorrow, the 28th of March 2014.
BTW The issues reported above my post here are solved. But we will not push the update today already to avoid any other new problems.
|
|
|
|
lovethebitcoin
Newbie
Offline
Activity: 4
Merit: 0
|
|
March 27, 2014, 02:32:10 PM |
|
I have the same problem as described in the last page. Bitstamp: Shows correct amount in wallet. Switches coin position on a trade signal but, does not place trade. Doesnt even place an order on the exchange. Is this fixed in the new version?
|
|
|
|
Stephan224 (OP)
|
|
March 27, 2014, 03:32:35 PM |
|
I have the same problem as described in the last page. Bitstamp: Shows correct amount in wallet. Switches coin position on a trade signal but, does not place trade. Doesnt even place an order on the exchange. Is this fixed in the new version? Yes this far everything looks really good. All the reported errors are solved and i just released the last test version to solve the last reported issues. If this version comes back fully confirmed then the update itself will be released. I expect this will be tomorrow.
|
|
|
|
Holdaaja
Legendary
Offline
Activity: 1274
Merit: 1000
|
|
March 27, 2014, 03:41:13 PM |
|
Is this bot easy to use? What do I have to do before it starts trading if I use btc-e? I saw someone here talking about cex-io, can I use this bot at there too?
|
|
|
|
Stephan224 (OP)
|
|
March 27, 2014, 07:18:15 PM |
|
Is this bot easy to use? What do I have to do before it starts trading if I use btc-e? I saw someone here talking about cex-io, can I use this bot at there too?
Easy to use is a relative thing. Some users find it hard to operate and some find it easy, i can not give a real image of it. But what i can tell is that you need to configure the API and you need to configure a trade-bot itself. To get a impression how this i done you can have a look at these links: https://www.haasbot.com/drop-loss-strategies/https://www.haasbot.com/basic-strategies/https://www.haasbot.com/basic-rsi-strategies/This is all very basic, but it gives a good impression how it works. Its also a good guideline for some basic setups. Edit: Bitstamp, BTC-e, Cex.IO, Cryptsy and BTCChina* are supported. * ) BTCChina does not work, we are waiting for approval to trade on LTC too. I have been told its madness over there and that is why this takes so long. But i keep the pressure on it.
|
|
|
|
g0re79
|
|
March 27, 2014, 08:19:19 PM Last edit: March 27, 2014, 08:35:32 PM by g0re79 |
|
Is this bot easy to use? What do I have to do before it starts trading if I use btc-e? I saw someone here talking about cex-io, can I use this bot at there too?
Its trivial to use it, but way much harder is to force it to do what You want (But with new beta its flawless so far). And even harder is to forge good strategy. As to BTCe - it seems that it won´t be necessary to trade there, if the news are right EDIT - Eeeh sorry - I mean BTCChina ofcourse
|
|
|
|
krach
Legendary
Offline
Activity: 1851
Merit: 1020
Get Rekt
|
|
March 27, 2014, 08:30:31 PM |
|
As to BTCe - it seems that it won´t be necessary to trade there, if the news are right Sad
I think you mean BTCChina
|
|
|
|
solarion
|
|
March 28, 2014, 04:21:10 PM |
|
Recently we have started a test on the new update, this test has gone well. We got back 4 bug reports of some small issues that are solved by now. Today we will create another test version and if that version solves the 4 reported bugs then the update will be released.
We are expecting to launch the update tomorrow, the 28th of March 2014.
BTW The issues reported above my post here are solved. But we will not push the update today already to avoid any other new problems. Thanks. Also, can we please please change the tradebot overview screen on the web interface back to what it was before? It's completely incomprehensible now. It takes 10x as long to check over the status of your bots.
|
|
|
|
Stephan224 (OP)
|
|
March 28, 2014, 05:17:58 PM |
|
The HaasBot has been updated to version 0.9.9.2
Please restart your trade-server to get the update notification and agree to it if you want to update.
The main target was to bring 100% stability to the APIs for all users now. And beside this some minor new things are added.
This is the summary of the changes implemented into this update. - Exchange disabled: BTCChina has been temporary disabled until approval (finally!) arrives - Alt-coin added: Ctm, Kdc, Lyc, Pot, Zeit (and more) - Alt-pairs added: (to many to list) - New: Balloon messages about the orders and there state (it is enabled by default but it can be switched off inside the server settings) - New: Inside the Classic interface there is a new status-row visible showing the orders as they are send and progressed. (the web interface will follow later) - Trade Indicator added: BlindSignal (watches the coin position and just send out a trade signal. To be used by advanced strategies only!) - Insurance added: CancelOrderAfterXmin (can cancel a order faster then 10minutes, 1 minute is the lowest) - Changed: Several API changes have been made to solve the remaining connection and/or trade problems. - Changed: Several kernel changes have been made to solve memory usage problems. (not everyting is fully solved here, sorry) - Changed: The time-out for a open order has changed from 2 minutes to 10 minutes (use the new insurance to reduce this time-out) - Changed: The weight of the prices read was calculated on a EMA, but this is back to SMA. (very minor impact, just a very, very slight change on the moving averages) - Bugfix: Usage of the comma decimal in the Classic Windows Interface is fixed - Bugfix: Small improvement to update fee of a trade-bot. (in case it fails for some reason)
We hope this update will solve all issues reported the past time and we also hope nobody is having anymore problems with the APIs. If you still encounter a problem, please contact us and we will try to solve it directly with a more recent build.
In case this update solves indeed all problems then we will get back to feature development. I can already disclose i have a appointment with the university near my home to work out some new trade indicators.
One last thing.... be aware of how you use the new BlindSignal indicator. If you do not see what you can do with it then i recommend to leave this indicator alone.
|
|
|
|
mattwm
Newbie
Offline
Activity: 47
Merit: 0
|
|
March 28, 2014, 05:33:30 PM |
|
Hi Stephan,
When I restarted the server it did not prompt for an update. I think because I have the 0992 beta it thinks it's the latest? Or does it update automatically?
|
|
|
|
Stephan224 (OP)
|
|
March 28, 2014, 05:46:02 PM |
|
Hi Stephan,
When I restarted the server it did not prompt for an update. I think because I have the 0992 beta it thinks it's the latest? Or does it update automatically?
Did you copy the test version over the existing version? If so then i can recommend to download the software again at the "My Account" page. Once you have it i can recommend to overwrite everything again. If you do so then you do not have to setup the APIs again and the trade-bots will be saved too.
|
|
|
|
mattwm
Newbie
Offline
Activity: 47
Merit: 0
|
|
March 28, 2014, 06:10:36 PM |
|
Hi Stephan,
When I restarted the server it did not prompt for an update. I think because I have the 0992 beta it thinks it's the latest? Or does it update automatically?
Did you copy the test version over the existing version? If so then i can recommend to download the software again at the "My Account" page. Once you have it i can recommend to overwrite everything again. If you do so then you do not have to setup the APIs again and the trade-bots will be saved too. Thanks, that worked. Any way to backtest further back than 2 days?
|
|
|
|
Stephan224 (OP)
|
|
March 28, 2014, 06:19:17 PM |
|
We can not go back more then 2 days... yet. At the next update we will add support for 2 days, 1 week, 2 weeks, 3 weeks and 4 weeks of backtesting/auto-tuning.
|
|
|
|
silverston
|
|
March 28, 2014, 06:20:07 PM Last edit: March 28, 2014, 06:52:15 PM by silverston |
|
@Stephan What about my problem Still nothing... edit. strange, but this version working.
|
|
|
|
Stephan224 (OP)
|
|
March 28, 2014, 08:25:12 PM |
|
@Stephan What about my problem Still nothing... edit. strange, but this version working. My guess is that your firewall setting has been reset. That was the cause of your problem, its a configuration issue of some kind inside the firewall. Good to read its solved this way.
|
|
|
|
silverston
|
|
March 28, 2014, 08:43:34 PM Last edit: March 28, 2014, 09:02:56 PM by silverston |
|
@Stephan How can you explane this: 28.03.2014 22:18:00 1,02 coins sold for a price of 0,0276 and bought before for 0,028 making total profit of -0,000408 28.03.2014 22:16:42 Insurances agree on Sell command 28.03.2014 22:16:42 Sell signal produced by the indicator(s). Insurance Overcome fee enabled!!!! ------------------------------------------------------------- I dont think it was firewall problem. I make clean install and clean licensing. After than all is good ------------------------------------------------------------- edit 2014-28-03 10:49:39.326 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc} changed to status COMPLETED 2014-28-03 10:49:39.343 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc} changed to status COMPLETED 2014-28-03 10:55:55.383 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,02769333 Btc/Ltc} changed to status QUEUED 2014-28-03 10:55:55.383 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,02769333 Btc/Ltc} changed to status QUEUED 2014-28-03 10:55:55.383 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc} changed to status EXECUTING 2014-28-03 10:55:55.578 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc} changed to status FAILED 2014-28-03 10:55:55.594 |ORDER_STACK| Order BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc failed: Error placing order on BTCe. 2014-28-03 10:57:09.051 |ERROR| Error retrieving open orders from BTCe. 2014-28-03 10:57:09.051 |ERROR| Error retrieving open orders: Error retrieving open orders from BTCe. 2014-28-03 10:57:09.637 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc} changed to status QUEUED 2014-28-03 10:57:09.637 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc} changed to status QUEUED 2014-28-03 10:57:09.637 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc} changed to status EXECUTING 2014-28-03 10:57:09.821 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc} changed to status FAILED 2014-28-03 10:57:09.838 |ORDER_STACK| Order BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc failed: Error placing order on BTCe.
2014-28-03 10:58:23.188 |ERROR| Error retrieving open orders from BTCe. 2014-28-03 10:58:23.193 |ERROR| Error retrieving open orders: Error retrieving open orders from BTCe. 2014-28-03 10:58:23.617 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc} changed to status QUEUED 2014-28-03 10:58:23.623 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc} changed to status QUEUED 2014-28-03 10:58:23.623 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc} changed to status EXECUTING 2014-28-03 10:58:23.820 |ORDER_STACK| {BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc} changed to status FAILED 2014-28-03 10:58:23.841 |ORDER_STACK| Order BTCe Buy 1,02 Ltc @ 0,0277 Btc/Ltc failed: Error placing order on BTCe. and again sell lower buy higher? I dont like this
|
|
|
|
Stephan224 (OP)
|
|
March 28, 2014, 11:28:55 PM |
|
@silverston: If you connect to the exchange then its much more likely fee percentages will come out properly. Making very, very tiny losses if you trade pure on the fee costs is not unknown. They can happen because of 2 reasons. First because of the used market prices on trading itself and secondly due rounding problems. The last one is the most known cause. You can avoid this from happening, just by using the price percentage change -insurance and configure this at 0.21% for example. But in general, with these numbers you have posted, i really would advice you to add 1 or 2 trade indicators.
|
|
|
|
|