Sixth alt coin thread I forgot to mod last thread.

[philipma1957]

Supposedly the BTG testnet is going to have a reset on Nov 8'th, so I don't think we'll see it go live for regular mining for at least a few days after that. Just keep an eye on these forums and Twitter etc...

So if they go live on November 8th, then that would be the amount of BTG we get from our current BTC balances or did that already happen and they are just mining BTG now themselves as part of the premine?

no the snapshot block is what matters for your wallet Block #491406     2017-10-24 01:17:35
yes now they're just premining
latest eta for mining is Nov 12

bitcoin gold dev: aiming to launch Nov 12  
https://youtu.be/un4SnLCrJ3Q?t=30m13s #BD 51: Eric Lombrozo - A New Hope

Disappointing money grab  pre mining until the 12th.  Most likely  this will bomb  hope I am wrong.  We need a good coin launch for gpu mining..

BTW we may get a btc diff drop of 5-7% that would be around nov 9th. It would be nice to see it come.

I am hoping to get 50th on line for btc very soon.

[1715251196]

1715251196

[1715251196]

1715251196

[rs1x]

What would cause the difficulty drop ?

[philipma1957]

What would cause the difficulty drop ?

BCC/BCH mining vs BTC mining.

BCC/BCH has risen in price and you can turn a slightly better profit  mining BCC then BTC

[generalt]

Supposedly the BTG testnet is going to have a reset on Nov 8'th, so I don't think we'll see it go live for regular mining for at least a few days after that. Just keep an eye on these forums and Twitter etc...

So if they go live on November 8th, then that would be the amount of BTG we get from our current BTC balances or did that already happen and they are just mining BTG now themselves as part of the premine?

no the snapshot block is what matters for your wallet Block #491406     2017-10-24 01:17:35
yes now they're just premining
latest eta for mining is Nov 12

bitcoin gold dev: aiming to launch Nov 12  
https://youtu.be/un4SnLCrJ3Q?t=30m13s #BD 51: Eric Lombrozo - A New Hope

Disappointing money grab  pre mining until the 12th.  Most likely  this will bomb  hope I am wrong.  We need a good coin launch for gpu mining..

BTW we may get a btc diff drop of 5-7% that would be around nov 9th. It would be nice to see it come.

I am hoping to get 50th on line for btc very soon.

Thanks for the info on the snapshot V8.

I'm kicking myself for not getting S9's back when I had the chance.  My SHA256 has dropped to around 28th.

[philipma1957]

Supposedly the BTG testnet is going to have a reset on Nov 8'th, so I don't think we'll see it go live for regular mining for at least a few days after that. Just keep an eye on these forums and Twitter etc...

So if they go live on November 8th, then that would be the amount of BTG we get from our current BTC balances or did that already happen and they are just mining BTG now themselves as part of the premine?

no the snapshot block is what matters for your wallet Block #491406     2017-10-24 01:17:35
yes now they're just premining
latest eta for mining is Nov 12

bitcoin gold dev: aiming to launch Nov 12  
https://youtu.be/un4SnLCrJ3Q?t=30m13s #BD 51: Eric Lombrozo - A New Hope

Disappointing money grab  pre mining until the 12th.  Most likely  this will bomb  hope I am wrong.  We need a good coin launch for gpu mining..

BTW we may get a btc diff drop of 5-7% that would be around nov 9th. It would be nice to see it come.

I am hoping to get 50th on line for btc very soon.

Thanks for the info on the snapshot V8.

I'm kicking myself for not getting S9's back when I had the chance.  My SHA256 has dropped to around 28th.

3 s-9s and 1 replaced board is about 46th. And 1 Avalon 741 to be repaired would be about 53 th

[citronick]

Supposedly the BTG testnet is going to have a reset on Nov 8'th, so I don't think we'll see it go live for regular mining for at least a few days after that. Just keep an eye on these forums and Twitter etc...

So if they go live on November 8th, then that would be the amount of BTG we get from our current BTC balances or did that already happen and they are just mining BTG now themselves as part of the premine?

no the snapshot block is what matters for your wallet Block #491406     2017-10-24 01:17:35
yes now they're just premining
latest eta for mining is Nov 12

bitcoin gold dev: aiming to launch Nov 12  
https://youtu.be/un4SnLCrJ3Q?t=30m13s #BD 51: Eric Lombrozo - A New Hope

Disappointing money grab  pre mining until the 12th.  Most likely  this will bomb  hope I am wrong.  We need a good coin launch for gpu mining..

BTW we may get a btc diff drop of 5-7% that would be around nov 9th. It would be nice to see it come.

I am hoping to get 50th on line for btc very soon.

Thanks for the info on the snapshot V8.

I'm kicking myself for not getting S9's back when I had the chance.  My SHA256 has dropped to around 28th.

3 s-9s and 1 replaced board is about 46th. And 1 Avalon 741 to be repaired would be about 53 th

Phil - Is the Bitmain RMA setup in Colorado reliable?
I have about a dozen boards to the RMA from Canada but we have always gone thru HK Bitmain.
Going to the Colorado office may be faster??

[philipma1957]

Supposedly the BTG testnet is going to have a reset on Nov 8'th, so I don't think we'll see it go live for regular mining for at least a few days after that. Just keep an eye on these forums and Twitter etc...

So if they go live on November 8th, then that would be the amount of BTG we get from our current BTC balances or did that already happen and they are just mining BTG now themselves as part of the premine?

no the snapshot block is what matters for your wallet Block #491406     2017-10-24 01:17:35
yes now they're just premining
latest eta for mining is Nov 12

bitcoin gold dev: aiming to launch Nov 12  
https://youtu.be/un4SnLCrJ3Q?t=30m13s #BD 51: Eric Lombrozo - A New Hope

Disappointing money grab  pre mining until the 12th.  Most likely  this will bomb  hope I am wrong.  We need a good coin launch for gpu mining..

BTW we may get a btc diff drop of 5-7% that would be around nov 9th. It would be nice to see it come.

I am hoping to get 50th on line for btc very soon.

Thanks for the info on the snapshot V8.

I'm kicking myself for not getting S9's back when I had the chance.  My SHA256 has dropped to around 28th.

3 s-9s and 1 replaced board is about 46th. And 1 Avalon 741 to be repaired would be about 53 th

Phil - Is the Bitmain RMA setup in Colorado reliable?
I have about a dozen boards to the RMA from Canada but we have always gone thru HK Bitmain.
Going to the Colorado office may be faster??

may be better.  I do 1 or 2 at a time.  they can be slow  but they do the repair/replace.

shipping has to be lower.

[Daaaveee]

Got my 4th card arriving today, a Vega 56, looking forward to having a play around with it. Seems like they the best time to ROI at the moment if you can get 1800h/s out of them with monero. Would prefer to get this hashrate through Nicehash as a small timer I like to get paid in BTC. Any idea on how to manage this?

 Just point whatever miner you are using at the Nicehash monero pool(s).

Thanks, sounds simple enough!

Managed to get my Vega 56 hashing at 1900h/s at 160w quite easily with xmr-stak-amd, seems a little temperamental though as it sometimes drops to ~1700, will have to keep an eye on that. I was also worried the blower might be too loud as its just in the house, but its really not too bad setting a temp target to 70c it hovers around 2100rpm on the fan which is fine. Upwards of 2600rpm it gets a bit noisy but with the reduced power limit temps are not bad. Currently pointed at supportxmr pool but will try and swap to Nicehash as mentioned to keep all my earning in BTC

[citronick]

Got my 4th card arriving today, a Vega 56, looking forward to having a play around with it. Seems like they the best time to ROI at the moment if you can get 1800h/s out of them with monero. Would prefer to get this hashrate through Nicehash as a small timer I like to get paid in BTC. Any idea on how to manage this?

 Just point whatever miner you are using at the Nicehash monero pool(s).

Thanks, sounds simple enough!

Managed to get my Vega 56 hashing at 1900h/s at 160w quite easily with xmr-stak-amd, seems a little temperamental though as it sometimes drops to ~1700, will have to keep an eye on that. I was also worried the blower might be too loud as its just in the house, but its really not too bad setting a temp target to 70c it hovers around 2100rpm on the fan which is fine. Upwards of 2600rpm it gets a bit noisy but with the reduced power limit temps are not bad. Currently pointed at supportxmr pool but will try and swap to Nicehash as mentioned to keep all my earning in BTC

Does stak support Nicehash?

[Daaaveee]

Got my 4th card arriving today, a Vega 56, looking forward to having a play around with it. Seems like they the best time to ROI at the moment if you can get 1800h/s out of them with monero. Would prefer to get this hashrate through Nicehash as a small timer I like to get paid in BTC. Any idea on how to manage this?

 Just point whatever miner you are using at the Nicehash monero pool(s).

Thanks, sounds simple enough!

Managed to get my Vega 56 hashing at 1900h/s at 160w quite easily with xmr-stak-amd, seems a little temperamental though as it sometimes drops to ~1700, will have to keep an eye on that. I was also worried the blower might be too loud as its just in the house, but its really not too bad setting a temp target to 70c it hovers around 2100rpm on the fan which is fine. Upwards of 2600rpm it gets a bit noisy but with the reduced power limit temps are not bad. Currently pointed at supportxmr pool but will try and swap to Nicehash as mentioned to keep all my earning in BTC

Does stak support Nicehash?

I don't know, certainly haven't been able to find much on it when Googling. My plan for this evening when I get the chance is to try editing the config to point to "stratum+tcp://cryptonight.eu.nicehash.com:3355" and my BTC address as username. No idea if it will work! I'm pretty noobie so not sure what Nicehash means by stratum instead of the usual pool? I have no doubt one of you guys will know more about this than me, but I can always learn through trial and error

Edit: Looks like cast-xmr might work on Nicehash according to someone on reddit, if I can't get stak to play ball.

[konqueror]

Got my 4th card arriving today, a Vega 56, looking forward to having a play around with it. Seems like they the best time to ROI at the moment if you can get 1800h/s out of them with monero. Would prefer to get this hashrate through Nicehash as a small timer I like to get paid in BTC. Any idea on how to manage this?

 Just point whatever miner you are using at the Nicehash monero pool(s).

Thanks, sounds simple enough!

Managed to get my Vega 56 hashing at 1900h/s at 160w quite easily with xmr-stak-amd, seems a little temperamental though as it sometimes drops to ~1700, will have to keep an eye on that. I was also worried the blower might be too loud as its just in the house, but its really not too bad setting a temp target to 70c it hovers around 2100rpm on the fan which is fine. Upwards of 2600rpm it gets a bit noisy but with the reduced power limit temps are not bad. Currently pointed at supportxmr pool but will try and swap to Nicehash as mentioned to keep all my earning in BTC

Does stak support Nicehash?

xmrig-amd (https://github.com/xmrig/xmrig-amd) has Nicehash support

[VoskCoin]

Anyone else picking up the 1070 TI's?

https://goo.gl/Wz6VuX


I've got 6 otw, 2 will be here today, some other members saying it was dominating in efficiency O_O

[philipma1957]

Anyone else picking up the 1070 TI's?

https://goo.gl/Wz6VuX


I've got 6 otw, 2 will be here today, some other members saying it was dominating in efficiency O_O

two of these due on friday


https://www.evga.com/products/product.aspx?pn=08G-P4-5678-KR

[TheYankeesWin!]

Phil did you get the 10x   Onda M12 motherboards?

[philipma1957]

I got a shipping number from dhl  the 10 pack may come this Friday.

The other seller may be bad  I ordered a sample on the 31st and no tracking I think I will need to put in a claim  against him.




Hi Allen,
 
Do you have any tracking infomation  for me.
 
 
Thank you and Best Regards ,
 
 Phliip


Allen xxx   2017-11-05 09:49
Shipped, tracking will be given tomorrow


Allen xxx 2017-11-06 22:04
Hi Philip, tracking number will be given today plesae wait a while. Thanks.


Philip xxx 2017-11-06 22:18
Allen,
 
 It has been six days since I paid via paypal. I can wait a little more.
 
Best regards,
 
Philip Axxx


Allen Dai   2017-11-06 22:35
Hi Philip, sorry but there is a weekend there.
 
We will use better FF next time in bulk orders, generally will be within 3 days from your payment till you get the tracking number.


Philip Axxx   2017-11-06 23:30

Okay  I hope to get this soon so that I can test it .
 
 
Best regards Philip Axxx

Allen Dxx   2017-11-06 23:30
Understood



So  this deal  may go south

Be careful of this seller below

https://www.alibaba.com/product-detail/8-PCIe-mining-motherboard-Mining-computer_60692122692.html?spm=a2700.8443308.0.0.xi0TTF

[UrsaUrsa]

I got a shipping number from dhl  the 10 pack may come this Friday.

The other seller may be bad  I ordered a sample on the 31st and no tracking I think I will need to put in a claim  against him.




Hi Allen,
 
Do you have any tracking infomation  for me.
 
 
Thank you and Best Regards ,
 
 Phliip


Allen xxx   2017-11-05 09:49
Shipped, tracking will be given tomorrow


Allen xxx 2017-11-06 22:04
Hi Philip, tracking number will be given today plesae wait a while. Thanks.


Philip xxx 2017-11-06 22:18
Allen,
 
 It has been six days since I paid via paypal. I can wait a little more.
 
Best regards,
 
Philip Axxx


Allen Dai   2017-11-06 22:35
Hi Philip, sorry but there is a weekend there.
 
We will use better FF next time in bulk orders, generally will be within 3 days from your payment till you get the tracking number.


Philip Axxx   2017-11-06 23:30

Okay  I hope to get this soon so that I can test it .
 
 
Best regards Philip Axxx

Allen Dxx   2017-11-06 23:30
Understood



So  this deal  may go south

Be careful of this seller below

https://www.alibaba.com/product-detail/8-PCIe-mining-motherboard-Mining-computer_60692122692.html?spm=a2700.8443308.0.0.xi0TTF

What sort of offer did you get from them Phil? I contacted a seller called Letine and they responded pretty fast.


For 12*PCIE motherboard sample price is usd120,
One sample shipping cost to UK is USD49.5
So total cost is usd120+usd49.5=usd169.5
 
May i know which payment terms is convenient for you pls: Alibaba trade assurance(need to add 3% handle fee), T/T or paypal(need to add 5% paypal handle fee)?
 
Thanks & Best regards
Ms Sidonia



I wish it was a bit cheaper but sounds legit.

[philipma1957]

I got a shipping number from dhl  the 10 pack may come this Friday.

The other seller may be bad  I ordered a sample on the 31st and no tracking I think I will need to put in a claim  against him.




Hi Allen,
 
Do you have any tracking infomation  for me.
 
 
Thank you and Best Regards ,
 
 Phliip


Allen xxx   2017-11-05 09:49
Shipped, tracking will be given tomorrow


Allen xxx 2017-11-06 22:04
Hi Philip, tracking number will be given today plesae wait a while. Thanks.


Philip xxx 2017-11-06 22:18
Allen,
 
 It has been six days since I paid via paypal. I can wait a little more.
 
Best regards,
 
Philip Axxx


Allen Dai   2017-11-06 22:35
Hi Philip, sorry but there is a weekend there.
 
We will use better FF next time in bulk orders, generally will be within 3 days from your payment till you get the tracking number.


Philip Axxx   2017-11-06 23:30

Okay  I hope to get this soon so that I can test it .
 
 
Best regards Philip Axxx

Allen Dxx   2017-11-06 23:30
Understood



So  this deal  may go south

Be careful of this seller below

https://www.alibaba.com/product-detail/8-PCIe-mining-motherboard-Mining-computer_60692122692.html?spm=a2700.8443308.0.0.xi0TTF

What sort of offer did you get from them Phil? I contacted a seller called Letine and they responded pretty fast.


For 12*PCIE motherboard sample price is usd120,
One sample shipping cost to UK is USD49.5
So total cost is usd120+usd49.5=usd169.5
 
May i know which payment terms is convenient for you pls: Alibaba trade assurance(need to add 3% handle fee), T/T or paypal(need to add 5% paypal handle fee)?
 
Thanks & Best regards
Ms Sidonia



I wish it was a bit cheaper but sounds legit.

Ms Sidona sold the sample onda m12 to me I paid with paypal so I was at 177.
The 10 pack is 1422 that includes shipping and paypal fee.

If you are in the USA I can send you 1 board for about 170 maybe less if you are close to New Jersey .

I figure I need 4 of the ten coming. And at 170 including shipping I make a few bucks.

Say

142 board cost
   8 my profit
20 to ship it

[vg54dett]

I've got 6 otw, 2 will be here today, some other members saying it was dominating in efficiency O_O

Any numbers yet ?

[judypug1956]

I am on my secondary account. I just voted. And will be out and about. I think I just got tracking for the sample

[soothaa]

Wait 1070 Tis are good? Everything I have read up until now has been negative about them..