PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[batsonxl]

only 5.4c is stable for me.
5.5b and 5.5c are not stable they just crash with same bat file i used for 5.4c.
only 10w 5.5c uses less than 5.4c, and gift is crash

[Kiawpqe]

Can someone spare me to send the sample config for binance pool, here??? Thanks.

GPU1: 64C 77% 90W, GPU2: 65C 62% 81W, GPU3: 64C 57% 91W, GPU4: 65C 49% 87W, GPU5: 65C 25% 82W, GPU6: 65C 59% 83W, GPU7: 65C 47% 79W
GPU1: cclock 1160 MHz, cvddc 868 mV, mclock 2112 MHz
GPU2: cclock 1160 MHz, cvddc 868 mV, mclock 2112 MHz
GPU3: cclock 1165 MHz, cvddc 868 mV, mclock 2112 MHz
GPU4: cclock 1160 MHz, cvddc 868 mV, mclock 2112 MHz
GPU5: cclock 1165 MHz, cvddc 868 mV, mclock 2112 MHz
GPU6: cclock 1160 MHz, cvddc 868 mV, mclock 2112 MHz
GPU7: cclock 1160 MHz, cvddc 868 mV, mclock 2112 MHz
GPUs power: 593.5 W; cost: 2.14 USD/day
Eth speed: 213.104 MH/s, shares: 3007/0/24, time: 2:10
GPUs: 1: 30.484 MH/s (385/12) 2: 30.393 MH/s (427) 3: 30.463 MH/s (420/7) 4: 30.517 MH/s (485) 5: 30.413 MH/s (445/2) 6: 30.385 MH/s (425/3) 7: 30.449 MH/s (420)

*** 2:10 *** 11/14 11:19 **************************************
Eth: Mining ETH on ethash.poolbinance.com:8888 for 2:10
Eth: Accepted shares 3007 (1 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 24 (0.79%), est. stales percentage 0.02%
Eth: Maximum difficulty of found share: 547.6 GH (!)
Eth: Average speed (5 min): 213.029 MH/s
Eth: Effective speed: 205.05 MH/s; at pool: 205.05 MH/s

Eth: GPU6: ETH share found!
Eth: Share actual difficulty: 2598 MH
Eth: Share accepted in 101 ms
Eth: GPU4: ETH share found!
Eth: Share actual difficulty: 1630 MH
Eth: Share accepted in 275 ms
Eth speed: 213.110 MH/s, shares: 3009/0/24, time: 2:10
GPUs: 1: 30.482 MH/s (385/12) 2: 30.394 MH/s (427) 3: 30.465 MH/s (420/7) 4: 30.517 MH/s (486) 5: 30.413 MH/s (445/2) 6: 30.389 MH/s (426/3) 7: 30.450 MH/s (420)
Eth: GPU7: ETH share found!
Eth: Share actual difficulty: 576 MH
Eth: Share accepted in 71 ms
Eth: New job #5b69f3d0 from ethash.poolbinance.com:8888; diff: 536MH
Eth: New job #96e38a96 from ethash.poolbinance.com:8888; diff: 536MH
Eth speed: 213.124 MH/s, shares: 3010/0/24, time: 2:10
GPUs: 1: 30.482 MH/s (385/12) 2: 30.396 MH/s (427) 3: 30.465 MH/s (420/7) 4: 30.518 MH/s (486) 5: 30.411 MH/s (445/2) 6: 30.403 MH/s (426/3) 7: 30.449 MH/s (421)
Eth: GPU5: ETH share found!
Eth: Share actual difficulty: 19.3 GH (!)
Eth: Share accepted in 51 ms
Eth: GPU4: ETH share found!
Eth: Share actual difficulty: 820 MH
Eth: Share accepted in 35 ms
Eth: GPU2: ETH share found!
Eth: Share actual difficulty: 6497 MH
Eth: Share accepted in 289 ms
DevFee: Connecting to ethash pool asia1.ethpool.org:3333 (proto: EthProxy)
DevFee: Connected to ethash pool asia1.ethpool.org:3333 (172.65.215.159)
DevFee: New job #cfbb698f from asia1.ethpool.org:3333; diff: 4000MH
Eth: GPU4: ETH share found!
Eth: Share actual difficulty: 1425 MH
Eth: GPU3: ETH share found!
Eth: Share actual difficulty: 2451 MH
Eth speed: 213.121 MH/s, shares: 3013/0/24, time: 2:10
GPUs: 1: 30.483 MH/s (385/12) 2: 30.395 MH/s (428) 3: 30.464 MH/s (420/7) 4: 30.517 MH/s (487) 5: 30.412 MH/s (446/2) 6: 30.401 MH/s (426/3) 7: 30.449 MH/s (421)
Eth: Share accepted in 217 ms
Eth: Share accepted in 152 ms


 
pool.binance.com
wow

3000 shareds in 2 hours

3-msi Rx-580 8gb
3-gts xxx Rx-580 8gb
1 powercolor Rx-580 8gb

hi, bro

-pool ethash.poolbinance.com:3333
or
-pool ethash.poolbinance.com:443
-pool ethash.poolbinance.com:25
-pool ethash.poolbinance.com:1800
-wal YourEthWalletAddress.WorkerName
-proto 2


tutorial of binance
https://www.binance.com/en/support/faq/9bd21a9536d74d1fb65c83f8e60ded93

low diff= +shares accepted
diff: 536MH    shares: 3010

no good

[Kiawpqe]

Looking for tips on fan control.  I am trying to set fan speeds and not sure I can do what I want.  I know -tt 60 will set temperature target at 60 deg and -tt -70 will set fan speed to 70%.  How do I implement more than one set of target temps?  I am trying to set these values and fan speeds - 50deg at 60% - 63deg at 70% - 76deg at 80%

I am thinking I need this in my config

-tt 50 -tt -60
-tt 63 -tt -70
-tt 76 -tt -80

Is this correct or am I missing something?

Thanks in advance for any input

This is incorrect. -tt 60 sets the target temp to 60 degrees. So it sets the fan speeds at a variable setpoint to keep the card at 60 degrees. With some cards it needs a fan speed of 40% when other cards are set at 75% fan speed. So you can only set 1 target temp for each card.

hi bro

try:

Gpu 1,Gpu2,Gpu3

-tt 50,63,76
-tt -60,-70,-80


or try MPT.(MorePowerTool)
https://www.igorslab.de/

[Kiawpqe]

new rig

*** 5:18 *** 2/11 19:12 **************************************
Eth: Mining ETH on ssl://eu1.ethermine.org:5555 for 5:18
Available GPUs for mining:
GPU1: AMD Radeon RX 6800 (pcie 11), OpenCL 2.0, 16 GB VRAM, 30 CUs
GPU2: Radeon RX 580 Series (pcie 12), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 13), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 14), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie 21), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU6: Radeon RX 580 Series (pcie 22), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU7: Radeon RX 580 Series (pcie 23), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU8: AMD Radeon RX 5700 XT (pcie 26), OpenCL 2.0, 8 GB VRAM, 40 CUs
GPU1: 50C 43% 167W, GPU2: 60C 39% 88W, GPU3: 60C 40% 95W, GPU4: 57C 34% 86W, GPU5: 59C 33% 82W, GPU6: 60C 30% 82W, GPU7: 58C 30% 83W, GPU8: 48C 26% 90W
GPU1: cclock 1176 MHz, cvddc 793 mV, mclock 2098 MHz, Tj 54C
GPU2: cclock 1190 MHz, cvddc 862 mV, mclock 2090 MHz
GPU3: cclock 1190 MHz, cvddc 862 mV, mclock 2090 MHz
GPU4: cclock 1200 MHz, cvddc 862 mV, mclock 2090 MHz
GPU5: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz
GPU6: cclock 1200 MHz, cvddc 856 mV, mclock 2113 MHz
GPU7: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz
GPU8: cclock 1159 MHz, cvddc 750 mV, mclock 1816 MHz, mvddc 850 mV, Tj 53C, Tmem 80C
GPUs power: 773.5 W; cost: 2.51 USD/day
Current -gt 15,38,38,41,43,42,42,52
Eth: Accepted shares 1463 (0 stales), rejected shares 0 (0 stales)
Eth: Incorrect shares 2 (0.14%), est. stales percentage 0.00%
Eth: Maximum difficulty of found share: 4285.7 GH (!)
Eth: Average speed (5 min): 305.976 MH/s
Eth: Effective speed: 306.64 MH/s; at pool: 306.64 MH/s
Eth: Estimated income: 33.82 USD/day

1000usd/month
75usd/month of 775watt
net 925usd
no bad

[Kiawpqe]

#
# PhoenixMiner configuration file
#
#
-rxboost 0,81,81,81,81,81,81,25
-gt 15,38,38,41,43,42,42,52
-rmode 1
-tt 50,60,60,60,60,60,60,48
-fanmin 30
-fanmax 100
-eres 100
-proto 3
-cdm 2
-hstats 2
-astats 1
-amd
-acm
-wdog 1
-gpow 100,100,100,100,100,100,100,100
-minRigSpeed 265
-coin eth
-clf 1
-clNew 1
-clKernel 1
-prate 0.135
-gpus 1,2,3,4,5,6,7,8
-cclock 1195,1190,1190,1200,1200,1200,1200,1200
-cvddc 793,853,853,855,850,850,850,750
-mclock 2110,2090,2090,2090,2113,2113,2113,1825
-mvddc 850,860,860,860,853,853,853,850
-pool ssl://eu1.ethermine.org:5555
-pool2 ssl://us1.ethermine.org:5555
#GRAVIEX-WALLET
#-wal 0x7**********************************.32*******
#BINANCE-WALLET
-wal 0x7**********************************.32*******
-mt 0,0,0,0,0,0,0,0,1
#-pool eu1.ethermine.org:4444 -pool2 us1.ethermine.org:4444
#-wal YourEthWalletAddress.WorkerName
#-proto 3
#-cdm 2



Eth: New job #b575c3a7 from ssl://eu1.ethermine.org:5555; diff: 4000MH
GPU1: 50C 43% 167W, GPU2: 60C 39% 88W, GPU3: 60C 40% 95W, GPU4: 57C 34% 86W, GPU5: 59C 33% 83W, GPU6: 60C 30% 82W, GPU7: 58C 30% 83W, GPU8: 47C 28% 90W
GPU1: cclock 1176 MHz, cvddc 793 mV, mclock 2098 MHz, Tj 55C
GPU2: cclock 1190 MHz, cvddc 862 mV, mclock 2090 MHz
GPU3: cclock 1190 MHz, cvddc 862 mV, mclock 2090 MHz
GPU4: cclock 1200 MHz, cvddc 862 mV, mclock 2090 MHz
GPU5: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz
GPU6: cclock 1200 MHz, cvddc 856 mV, mclock 2113 MHz
GPU7: cclock 1200 MHz, cvddc 856 mV, mclock 2110 MHz
GPU8: cclock 1159 MHz, cvddc 750 mV, mclock 1816 MHz, mvddc 850 mV, Tj 53C, Tmem 80C
GPUs power: 773.1 W; cost: 2.50 USD/day
Eth speed: 305.953 MH/s, shares: 1517/0/2, time: 5:28
GPUs: 1: 59.841 MH/s (312) 2: 32.312 MH/s (160) 3: 32.313 MH/s (152/1) 4: 32.281 MH/s (151) 5: 32.489 MH/s (175/1) 6: 32.489 MH/s (160) 7: 32.488 MH/s (163) 8: 51.741 MH/s (244)

[skablast]

kiawpqe, I tend not to believe that the power at the wall of that rig is 775w. I know that is what the software is reading, but its around  90 w / card....
Good setup e and results, btw

[greasepit]

After updating RX 580 driver from version Adrenalin 2020 Edition 20.4.2 Recommended (WHQL) to version Adrenalin 2020 Edition 20.11.2 Recommended (WHQL) on my 4 rigs, they are now kind of unstable, crashing so often like 2 days uptime maximum


Using Windows 10
PhoenixMiner 5.5c
6 cards each rig


I'll rollback to the oldest driver and see if they get more stable.

Anyone else having the same issue???

Hi everyone

I downgraded the drivers version to 20.4.2 but it kept crashing! But after downgrading PhoenixMiner to 5.4c it has resolved.

5.5c is not stable for my Rx 580.
A friend of mine is having the same issue with his single Rx 580.

[Kiawpqe]

kiawpqe, I tend not to believe that the power at the wall of that rig is 775w. I know that is what the software is reading, but its around  90 w / card....
Good setup e and results, btw

yes bro

is PM reading(no wall)
8xgpu (6-RX580,1-RX5700 xt,1RX6800)
775w in PM
is well it,nooo?
only RX6800 165/175w 58/60MH/s

[Kiawpqe]

After updating RX 580 driver from version Adrenalin 2020 Edition 20.4.2 Recommended (WHQL) to version Adrenalin 2020 Edition 20.11.2 Recommended (WHQL) on my 4 rigs, they are now kind of unstable, crashing so often like 2 days uptime maximum


Using Windows 10
PhoenixMiner 5.5c
6 cards each rig


I'll rollback to the oldest driver and see if they get more stable.

Anyone else having the same issue???

Hi everyone

I downgraded the drivers version to 20.4.2 but it kept crashing! But after downgrading PhoenixMiner to 5.4c it has resolved.

5.5c is not stable for my Rx 580.
A friend of mine is having the same issue with his single Rx 580.

i with Adrenalin 2020 Edition 20.12.1
win10

[nsummy]

Does anyone have the issue of PhoenixMiner essentially locking up the windows system if one of the cards crashes?  On mine, I get the notice "Waiting 15s for the previous instance to close"   It is then impossible to manually close it, and it requires a full restart. 

[skablast]

Just be aware of the message just before mine:

The official download of phoenix is the one in the first post of the threads  not the one in the post before.

So, DO NOT USE that LINK

[badgoodtime]

Hello guys,

Can I ask here about my problem ?

I`m trying to mining eth with Phoenix Miner but i`m getting an error message


Phoenix Miner 5.5c Windows/msvc - Release build
-----------------------------------------------

CUDA version: 11.0, CUDA runtime: 8.0
No OpenCL platforms found
Available GPUs for mining:
GPU1: GeForce GTX 1650 (pcie 1), CUDA cap. 7.5, 4 GB VRAM, 14 CUs
Nvidia driver version: 461.40
Eth: Loading pools from epools.txt
Eth: the pool list contains 6 pools (1 from command-line)
Eth: primary pool: ssl://asia1.ethermine.org:5555
Starting GPU mining
Eth: Connecting to ethash pool ssl://asia1.ethermine.org:5555 (proto: EthProxy)
GPU1: 29C 50% 10W
GPUs power: 10.3 W
Eth: Connected to SSL ethash pool asia1.ethermine.org:5555 (2606:4700:90:0:d80c:ff8b:7d45:b70e)
Listening for CDM remote manager at port 3333 in read-only mode
Eth: New job #13a2e45f from ssl://asia1.ethermine.org:5555; diff: 4000MH
GPU1: Starting up... (0)
GPU1: Generating ethash light cache for epoch #392
Eth: New job #d160df6f from ssl://asia1.ethermine.org:5555; diff: 4000MH
Light cache generated in 3.0 s (22.0 MB/s)
Eth: New job #ed4217ec from ssl://asia1.ethermine.org:5555; diff: 4000MH
Eth: New job #2009407e from ssl://asia1.ethermine.org:5555; diff: 4000MH
GPU1: Allocating DAG for epoch #392 (4.06) GB
CUDA error in CudaProgram.cu:388 : out of memory (2)
GPU1: CUDA memory: 4.00 GB total, 3.25 GB free
GPU1 initMiner error: out of memory
Fatal error detected. Restarting.
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00



Eth: New job #0d4111ed from ssl://asia1.ethermine.org:5555; diff: 4000MH
Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00



Phoenix Miner 5.5c Windows/msvc - Release build
-----------------------------------------------

Waiting 15 s for previous instance to close


Any ideas about what can I do to fix that ?

Thank you

If it`s the wrong place I apologize

Hey guys.

I got the same problem with GeForce GTX 1650 on my prestige 14 laptop, someone know how to fix it? :/

Any help is very appreciated, thanks for your time.

Cheers

[buraz11]

4gb gpus cant mine eth anymore

[bledos07]

Hi guys, which program are you using for tweaking of rx 6800?
Thanks

I receive my rx6800 tomorrow
It would be a pleasure to share information about the configuration and other matters.
I'm going to mount it on in rig amd full:
Asus Rog Strix x570-E Gaming.
Ryzen 9 3950x 4.7GHz
Corsair iCUE H115i rgb PRO XT
Alpha AMD DDR4-3200
AsRock RX-6800 PHANTOM Gaming D OC
I already have SAM activated to test if it runs at + 80MH / s

Hi, I have alredy rx 6800 and i never reach more then 60 Mhs, what about u?
Guys can u help me someone, always if I start my Phoenix Miner then my windows system start lagging, it is really anoying, I never had this experience with previous 5700 mining...

[veso760720]

Does anything happen with rx 6800
Would you mind if you set up
timings and more

[lokidiabel]

is this normal ?

If i start PhoenixMiner 5.5c on a RX 6900xt it only detects 40 CU.
I though the 6900xt has 80 CU ? Or did the miner count them different and its normal ?

<<<<main GPU1: AMD Radeon RX 6900 XT (pcie 10), OpenCL 2.0, 16 GB VRAM, 40 CUs ??>>>>

[hesido]

With all these fake phoenix links (note: ALWAYS follow links on original post), I wish that new users should NOT be able to post links on threads, with a setting per thread. Just make it harder for these low lives.

[batsonxl]

Hi guys, which program are you using for tweaking of rx 6800?
Thanks

I receive my rx6800 tomorrow
It would be a pleasure to share information about the configuration and other matters.
I'm going to mount it on in rig amd full:
Asus Rog Strix x570-E Gaming.
Ryzen 9 3950x 4.7GHz
Corsair iCUE H115i rgb PRO XT
Alpha AMD DDR4-3200
AsRock RX-6800 PHANTOM Gaming D OC
I already have SAM activated to test if it runs at + 80MH / s

Hi, I have alredy rx 6800 and i never reach more then 60 Mhs, what about u?
Guys can u help me someone, always if I start my Phoenix Miner then my windows system start lagging, it is really anoying, I never had this experience with previous 5700 mining...

yes there must be command -mi . you can set it lower 10 or 9. default is 12. test it. maybe you will loose some hasrate but your pc will not lag.

[bledos07]

Hi guys, which program are you using for tweaking of rx 6800?
Thanks

I receive my rx6800 tomorrow
It would be a pleasure to share information about the configuration and other matters.
I'm going to mount it on in rig amd full:
Asus Rog Strix x570-E Gaming.
Ryzen 9 3950x 4.7GHz
Corsair iCUE H115i rgb PRO XT
Alpha AMD DDR4-3200
AsRock RX-6800 PHANTOM Gaming D OC
I already have SAM activated to test if it runs at + 80MH / s

Hi, I have alredy rx 6800 and i never reach more then 60 Mhs, what about u?
Guys can u help me someone, always if I start my Phoenix Miner then my windows system start lagging, it is really anoying, I never had this experience with previous 5700 mining...

yes there must be command -mi . you can set it lower 10 or 9. default is 12. test it. maybe you will loose some hasrate but your pc will not lag.

Really thx, I set it for -mi 2 and it get 59 Mhs without any laggs.

[Toninho]

Hi, after 12 hours the miner starts giving this error -»

Unknown OpenCL driver version! Hashrate and stale shares may suffer

2021.02.12:11:15:58.688: main Phoenix Miner 5.2e Windows/msvc - Release build
2021.02.12:11:15:58.688: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal xxxxxxxxxxxxxxxxxxxxxx.480x480 -mt 1 -amd -coin etc
2021.02.12:11:16:00.688: main Unknown OpenCL driver version! Hashrate and stale shares may suffer
2021.02.12:11:16:00.688: main OpenCL platform: OpenCL 2.1 AMD-APP (3075.13)
2021.02.12:11:16:00.708: main Available GPUs for mining:
2021.02.12:11:16:00.708: main GPU1: Radeon (TM) RX 480 Graphics (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2021.02.12:11:16:00.708: main GPU2: Radeon (TM) RX 480 Graphics (pcie 2), OpenCL 2.0, 8 GB VRAM, 36 CUs
2021.02.12:11:16:00.709: main ADL library initialized
2021.02.12:11:16:02.762: main Eth: Loading pools from epools.txt
2021.02.12:11:16:02.762: main Eth: the pool list contains 8 pools (2 from command-line)
2021.02.12:11:16:02.762: main Eth: primary pool: ssl://eu1.ethermine.org:5555
2021.02.12:11:16:02.762: main Starting GPU mining
2021.02.12:11:16:02.762: main Matched GPU1 to ADL adapter index 8 (method 1)
2021.02.12:11:16:02.801: main GPU1: AMD driver 20.10.35.02

Is there a solution?