PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[feNDer2k5]

Rxboost stopped working after changing epochs #385? Hashrate dropped on RX480-580 8Gb.

[bitquad]

Guys, how much MHs of hashrate should i expect with Phoenix miner for single Gtx 1070 gpu without overclocking and memory pills?

I have an evga gtx 1070 ftw3 and I just tested here for you, it says 29mhs with overclock +110 core, memory +400, power limit 74, in the past as i remember used to be 31mhs with power limit 55. It seems that every dag closer or after 4gb the speed is reduced and reduced. So if for mining, I would not recommend this gpu, for gaming is great, I can play most games at 4k with low or medium visuals, this card is 4 years old, amazing.

Yeah agree with you. my 1070 gaming x was doing 33mhs easy now im lucky on 31.5mhs. gaminx uses too much power like 160-170w.i never increased core, instead i used -100 memory +600 pow 75

I am seeing the same thing. My 1070 ti cards used to get 34 mh/s. Now around 32 mh/s. 1070 used to get 31 mh/s, now 28.5 mh/s.

But I look at the number of shares at the pool. That has stayed roughly the same. Have your shares also dropped? With 1372 mh/s I get anywhere from 1100 - to almost 1300 shares.

One thing I have noticed is that the latest Phoenix Miner is a lot more stable than Claymore ever was. All my rigs will go for a long time without restarting. Claymore's miner shows me for how long they have been mining and how many shares. It is a lot more than with Claymore 15. Very happy with Phoenix Miner. I should have switched a long time ago.

[Digital_Seytan]

Is anyone running p106-100s mining cards with 6Gb ? I can run them  in any phoenix miner. My miners keep closing phoenix after 15 minutes. Cannot get stable runs. tried 5.4c. Latest and previous Nvidia drivers.

Phoenix, can you help with some issues im having using P106-100 6Gbs and any of your 5.x series miners? The miner starts but closes after about 5-10 minutes with no information in the logs. Can you help me to mitigate the issue? Really want to solve the issue.

[amxcs]

What speed normally mining now RX570/RX580 8GB?

[bitquad]

What speed normally mining now RX570/RX580 8GB?

I am getting 31.3 mh/s stable with RX580 8GB - Sapphire.

[amxcs]

Thanks!
Is a drop hashrate expected before the dag file becomes 8GB?
Is it worth investing in such cards?

[gnenext360]

my radeon vii used to run 95~96 but this morning only runs 92 any thing happens to the miner software?

[DarknessStorm]

Greetings.
Can i ask a question? if someone knows the answer ofc.
I need to mine with my 5700xt in "light" mode (as it was in claymore with setting "-ethi 0":50-55% gpu loading or "-ethi 1":80-85%)
and yeas, i know there're some settings in phoenix that should do this... but they can't.
with -gpow (any number) i'm getting https://i.imgur.com/XE0K521m.jpg (gpu loading) https://i.imgur.com/JwZCdUKm.jpg (core clock)
with -mi/-li the situation is almost the same - no stable mining. (https://i.imgur.com/P0U68drm.jpg)

Will be very thankful for any help.

[soda37]

my radeon vii used to run 95~96 but this morning only runs 92 any thing happens to the miner software?

you're not the only one who noticed, check previous page. My Vega VII dropped from 91 to 88 as well. You can notice that yesterday around 7:30 pm UTC global hashrate dropped everywhere in general when DAG epoch switched from 384 to 385 if I'm not mistaken.

[sobertram]

my radeon vii used to run 95~96 but this morning only runs 92 any thing happens to the miner software?

you're not the only one who noticed, check previous page. My Vega VII dropped from 91 to 88 as well. You can notice that yesterday around 7:30 pm UTC global hashrate dropped everywhere in general when DAG epoch switched from 384 to 385 if I'm not mistaken.

Ok this must be the reason for my issue as well. Anyone dual mining also noticed dual mining hash rates drop to 0? I have 2 rigs and around the same time they both stopped mining blake2s. The miner connects to the dual coin pool and receives work but the reported hash rate is 0. It has been working fine for the past few days. I am assuming now this epoch event caused the issue. I tried different pools to make sure.

I have AMD RX580 cards, have not seen a hash rate decline on ethash.

[sobertram]

Rig 1) 6 x RX580 8GB - since couple of weeks I started having problems with ETH. I have updated the drivers as they were pretty old. I have been using Claymore for a long time with no problems. I have read that it's no longer the best option, so I tried Phoenix miner, which I am using on the other Rig already - latest ver.5.4c. It starts, connects to the pool and at the end of the creation of the DAG, it gives this error:

Code:

2020.12.30:17:39:49.974: GPU1 GPU1: clSetKernelArg (-48)
2020.12.30:17:39:49.974: wdog Fatal error detected. Restarting.

I could not find solution so far. I have increased the virtual memory to 54000, just in case, the drivers are the latest version, the phoenix miner is the latest version. Any suggestions what could be causing this?

What is your output from phoenixminer list?

C:\PhoenixMiner_5.4c_Windows>PhoenixMiner.exe -list
Phoenix Miner 5.4c Windows/msvc - Release build
-----------------------------------------------

No CUDA driver found
OpenCL driver version: 20.11.2
Available GPUs for mining:
GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU2: Radeon RX 580 Series (pcie 2), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU3: Radeon RX 580 Series (pcie 4), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU4: Radeon RX 580 Series (pcie 6), OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU5: Radeon RX 580 Series (pcie , OpenCL 2.0, 8 GB VRAM, 36 CUs
GPU6: Radeon RX 580 Series (pcie 9), OpenCL 2.0, 8 GB VRAM, 36 CUs

[Bult]

Hi,
I have problem to start mining rig multi gpu 5600 XT, drivers 20.45 when I run the  miner DAG it is only created for GPU 1 and only this card starts to mine at the correct speed of 38Mh, the rest of the cards show 0Mh. Where is the problem ?
All cards are visible

GPU1: AMD Radeon RX 5600 XT (pcie 3), OpenCL 2.0, 6 GB VRAM, 36 CUs
GPU2: AMD Radeon RX 5600 XT (pcie 6), OpenCL 2.0, 6 GB VRAM, 36 CUs
GPU3: AMD Radeon RX 5600 XT (pcie 10), OpenCL 2.0, 6 GB VRAM, 36 CUs

Please Help

[sobertram]

gonne try again.
i mine with latest drivers on windows 10.
i get a good hash rate on my 3060TI but i think there is something wrong with my settings.
share count is low but share difficulty is extremly high (see screenshot)
is this good/bad and what to do about it?

https://i.imgur.com/YkVTGFO.png

Looks like you are doing excellent. I don't run the same card but here is what I found for expected hash rates from a nice hash blog https://www.nicehash.com/blog/post/nvidia-rtx-3060-ti-mining-hashrate:

Code:

NVIDIA RTX 3060 Ti mining performance
The first rumors have it that the RTX 3060 Ti can perform at 61 MH/s with a 60% power limit (120W) and applied overclocks (source).

We cannot confirm the above rumors, but we can confirm the hashrate of at least 53 MH/s. We do not know what mining software or overclocks were used.

Another example here, https://cryptoage.com/en/2285-nvidia-geforce-rtx-3060ti-first-ethereum-mining-test.html

The "Effective speed:" from your image is > 61MH/s which means you are submitting shares at expected hashrate so you are good. That will fluctuate up and down but should over time average to ~59 MH/s which is your reported hasrate.

[duplj30]

my radeon vii used to run 95~96 but this morning only runs 92 any thing happens to the miner software?

the size of the dag has exceeded 4gb, as the phoenixminer wrote, when this limit is exceeded, the mechanism of dag formation changes, and therefore the hash rate is slightly reduced and power consumption increases. perhaps in the next versions they will make adjustments and these parameters will improve
also you need to update the -gt parameter

[tps_star]

hi my 1070 not mining eth with claymore miner phoenix miner and t-rex miner
in cla
please help me claymore see this message pool sent wrong data cannot set epoch

[PoKeBoLa]

What speed normally mining now RX570/RX580 8GB?

I am getting 31.3 mh/s stable with RX580 8GB - Sapphire.

Can u shrare us your settings and Brand and Models of ur GPUs ? please?

[kiki456]

What speed normally mining now RX570/RX580 8GB?

I am getting 31.3 mh/s stable with RX580 8GB - Sapphire.

Can u shrare us your settings and Brand and Models of ur GPUs ? please?

I am getting 32mh on rx580. Core 1350Mhz Memory 2185Mhz

[bitquad]

What speed normally mining now RX570/RX580 8GB?

I am getting 31.3 mh/s stable with RX580 8GB - Sapphire.

Can u shrare us your settings and Brand and Models of ur GPUs ? please?

Sapphire 11265-01-20G Radeon NITRO+ Rx 580 8GB GDDR5 Dual HDMI/ DVI-D/ Dual DP with Backplate (UEFI) PCI-E Graphics Card

I have a custom BIOS on all of them (18). I forgot what memory type Samsung / Micron. Memory is at 2200 mhz or 2250 mhz. I think 2200 is more stable. Before Claymore stopped I could get up to 33 mh/s with them. But I read Claymore was exaggerating.

I run my batch file as administrator.
_______________________________________________________________________________ ________________________________________________
REM
REM Example bat file for starting PhoenixMiner.exe to mine ETH
REM

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

REM IMPORTANT: Replace the ETH address with your own ETH wallet address in the -wal option (Rig001 is the name of the rig)
C:\Users\me\Desktop\PhoenixMiner_5.4c_Windows\PhoenixMiner.exe -pool us1.ethermine.org:4444 -pool2 eu1.ethermine.org:4444 -wal mywallet.myrig -rxboost 1 -straps 1
pause

[bitquad]

What speed normally mining now RX570/RX580 8GB?

I am getting 31.3 mh/s stable with RX580 8GB - Sapphire.

Can u shrare us your settings and Brand and Models of ur GPUs ? please?

I am getting 32mh on rx580. Core 1350Mhz Memory 2185Mhz

34MHS with claymore straps + phoenixminer

-cclock 1250
-mclock 2250

Can you share details on how you are applying the claymore straps? I noticed that the GPU cards have a different order in Claymore VS Phoenix. With Claymore all the AMD cards came first as GPU 0, 1, 2 etc. And then the Nvidia cards would follow. But with Phoenix they are staggered I would have to change my Claymore command line settings to stagger them. So I just said forget it. I have 3 rigs and it would take time to arrange it correctly.

Here's what my Claymore batch looked like. I had to dial down one RX580 cardsto 2100 memory as you can see below because it would stop mining at 2200.
________________________________________________

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
C:\Users\me\Desktop\CLAYMORE15\EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal mywallet.myrig -dbg -1 -epsw x -mode 1 -ftime 10 -eres 2 -di 0123456789abc -rxboost 1,1,1,1,1,1 -strap 1,1,1,1,1,1,1,1,1,1,1,1,1 -cclock 1130,1130,1130,1130,1130,1130,+100,+100,+100,+100,+100,+100,+100 -mclock 2100,2200,2200,2200,2200,2200,+600,+600,+600,+600,+600,+600,+600 -cvddc 850,850,850,850,850,850 -mvddc 850,850,850,850,850,850 -fanmin 60,60,60,60,60,60,60,60,60,60,60,60,60 -fanmax 60,60,60,60,60,60,60,60,60,60,60,60,60

[PoKeBoLa]

What speed normally mining now RX570/RX580 8GB?

I am getting 31.3 mh/s stable with RX580 8GB - Sapphire.

Can u shrare us your settings and Brand and Models of ur GPUs ? please?

I am getting 32mh on rx580. Core 1350Mhz Memory 2185Mhz

Thanks man ! ... what about the mV on Core and Memo?