PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[r0bs0n]

Hello folks.
I have a situation here while mining ETH.
One of my cards, RX 580 4gb, can only go up to 4046 (22 MH/s) on daglim. If I set from 4047 and up it crashes after few seconds while auto tuning.

Do I have a problematic card or is it normal? Few weeks ago it was mining at 30 MH/s.

That's zombie mode

Why the zombie mode?
I was asked developer why zombie mode. Well, I found that term fitting. These are cards that are supposed to be dead, yet they continue mining but gradually slower. Like an undead (GPU jargon).

Yes, I know zombie mode. What I'm not getting is why 4046 mb only. Isn't suppose to go close to 4070~4078 mb? I have another card on same PC wich goes well up to 4077 mb daglim.

[vladutz1186]

I have problem with PheonixMiner OC in Ethos ...


phoenixminer=flags -mode 1 -proto 2 -wdtimeout 300 -gt 43 -cclock 1150,1257,1150,1150,1257,1257 -mclock 2100,2100,2100,2100,2100,2100 -cvddc 875 -mvddc 875


GPU1: set GPU clocks to 1150 MHz (Vddc 875 mV)
GPU1: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU2: set GPU clocks to 1257 MHz (Vddc 875 mV)
GPU2: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU3: set GPU clocks to 1150 MHz (Vddc 875 mV)
GPU3: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU4: set GPU clocks to 1150 MHz (Vddc 875 mV)
GPU4: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU5: set GPU clocks to 1257 MHz (Vddc 875 mV)
GPU5: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU6: set GPU clocks to 1257 MHz (Vddc 875 mV)
GPU6: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU1: 43C 89% 133W, GPU2: 53C 89% 109W, GPU3: 44C 89% 124W, GPU4: 47C 89% 139W, GPU5: 56C 89% 116W, GPU6: 53C 89% 108W


In ethos stats I have this ...

default_core:                             1340 1340 1340 1340 1340 1340
default_mem:                              1750 2000 1750 1750 2000 2000
vramsize:                                 8 8 8 8 8 8
core:                                     1340 1340 1340 1340 1340 1340
mem:                                      1750 2000 1750 1750 2000 2000


So, why won`t my RX580 OC ? Something in miner config, but I don`t know what ...

[j2james]

Hello,

No workaround yet for Nvidia 1070? from 32-33 the speed dropped to 25-26.
I remember years ago when we started with this mining it was an issue for AMD cards but still RX 580 performance is ~ 30-31, way better than Nvidia .

Thanks

Try to set parameter

-eres 1

if will not work, then

-eres 0

It helped for me. Look at my messages before in this thread

I try this, not help me. I have always 29,8MH on gtx 1070, before I have 32MH,

Your case is not my one. And it is because calculating becames more complicated. PM developers said that it is a problem of NVidia cards. A year ago or about that I also had 192Mh on 6 cards. MC was +640, PL was 64%, CC was +102 and it costed 750W.

But beginning from about one year ago (may be less) I have time to time decreasing of hashrate and memory overclocking beginning from some values does not increase hashrate. For example now I use for some cards MC +450, but if I will use +640, nothing will bw changed. Moreover, hashrate can be less then if I use +450. So now I have stable 180Mh on 6 cards. And now I use PL 100%, also for one card CC was decreased to +70 (more bigger values does not increase hashrate). And now 180Mh costs me 1000W.

Problem that I was talk about is that MC changes does nothing at all. So with my current settings of CC and PL I had 127Mh on 6 cards.

When I used "-eres 0" (now I use "-eres 1", which also works good) my hashrate was back to 180Mh and hashrate again depends on MC values.

So we are talking about different problems.

[vladutz1186]

I have problem with PheonixMiner OC in Ethos ...


phoenixminer=flags -mode 1 -proto 2 -wdtimeout 300 -gt 43 -cclock 1150,1257,1150,1150,1257,1257 -mclock 2100,2100,2100,2100,2100,2100 -cvddc 875 -mvddc 875


GPU1: set GPU clocks to 1150 MHz (Vddc 875 mV)
GPU1: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU2: set GPU clocks to 1257 MHz (Vddc 875 mV)
GPU2: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU3: set GPU clocks to 1150 MHz (Vddc 875 mV)
GPU3: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU4: set GPU clocks to 1150 MHz (Vddc 875 mV)
GPU4: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU5: set GPU clocks to 1257 MHz (Vddc 875 mV)
GPU5: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU6: set GPU clocks to 1257 MHz (Vddc 875 mV)
GPU6: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU1: 43C 89% 133W, GPU2: 53C 89% 109W, GPU3: 44C 89% 124W, GPU4: 47C 89% 139W, GPU5: 56C 89% 116W, GPU6: 53C 89% 108W


In ethos stats I have this ...

default_core:                             1340 1340 1340 1340 1340 1340
default_mem:                              1750 2000 1750 1750 2000 2000
vramsize:                                 8 8 8 8 8 8
core:                                     1340 1340 1340 1340 1340 1340
mem:                                      1750 2000 1750 1750 2000 2000


So, why won`t my RX580 OC ? Something in miner config, but I don`t know what ...

Solved , restart is required in Ethos after OC

[forato]

I have problem with PheonixMiner OC in Ethos ...


phoenixminer=flags -mode 1 -proto 2 -wdtimeout 300 -gt 43 -cclock 1150,1257,1150,1150,1257,1257 -mclock 2100,2100,2100,2100,2100,2100 -cvddc 875 -mvddc 875


GPU1: set GPU clocks to 1150 MHz (Vddc 875 mV)
GPU1: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU2: set GPU clocks to 1257 MHz (Vddc 875 mV)
GPU2: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU3: set GPU clocks to 1150 MHz (Vddc 875 mV)
GPU3: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU4: set GPU clocks to 1150 MHz (Vddc 875 mV)
GPU4: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU5: set GPU clocks to 1257 MHz (Vddc 875 mV)
GPU5: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU6: set GPU clocks to 1257 MHz (Vddc 875 mV)
GPU6: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU1: 43C 89% 133W, GPU2: 53C 89% 109W, GPU3: 44C 89% 124W, GPU4: 47C 89% 139W, GPU5: 56C 89% 116W, GPU6: 53C 89% 108W


In ethos stats I have this ...

default_core:                             1340 1340 1340 1340 1340 1340
default_mem:                              1750 2000 1750 1750 2000 2000
vramsize:                                 8 8 8 8 8 8
core:                                     1340 1340 1340 1340 1340 1340
mem:                                      1750 2000 1750 1750 2000 2000


So, why won`t my RX580 OC ? Something in miner config, but I don`t know what ...

On ETHOS try to go to config (home/ETHOS/local.conf)

And set:

cor 1150 1150 1150 1150 1150 1150
mem 2100 2100 2100 2100 2100 2100

[vladutz1186]

I have problem with PheonixMiner OC in Ethos ...


phoenixminer=flags -mode 1 -proto 2 -wdtimeout 300 -gt 43 -cclock 1150,1257,1150,1150,1257,1257 -mclock 2100,2100,2100,2100,2100,2100 -cvddc 875 -mvddc 875


GPU1: set GPU clocks to 1150 MHz (Vddc 875 mV)
GPU1: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU2: set GPU clocks to 1257 MHz (Vddc 875 mV)
GPU2: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU3: set GPU clocks to 1150 MHz (Vddc 875 mV)
GPU3: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU4: set GPU clocks to 1150 MHz (Vddc 875 mV)
GPU4: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU5: set GPU clocks to 1257 MHz (Vddc 875 mV)
GPU5: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU6: set GPU clocks to 1257 MHz (Vddc 875 mV)
GPU6: set VMEM clocks to 2100 MHz (Vddc 875 mV)
GPU1: 43C 89% 133W, GPU2: 53C 89% 109W, GPU3: 44C 89% 124W, GPU4: 47C 89% 139W, GPU5: 56C 89% 116W, GPU6: 53C 89% 108W


In ethos stats I have this ...

default_core:                             1340 1340 1340 1340 1340 1340
default_mem:                              1750 2000 1750 1750 2000 2000
vramsize:                                 8 8 8 8 8 8
core:                                     1340 1340 1340 1340 1340 1340
mem:                                      1750 2000 1750 1750 2000 2000


So, why won`t my RX580 OC ? Something in miner config, but I don`t know what ...

On ETHOS try to go to config (home/ETHOS/local.conf)

And set:

cor 1150 1150 1150 1150 1150 1150
mem 2100 2100 2100 2100 2100 2100

I know about local.conf ... I`m using ethos from 3 yrs, but with ethminer Now it`s fine, after reboot ! Hope this OC will work, and no crashes

cor f9d411 1230 1257 1230 1230 1257 1257
mem f9d411 2100 2100 2100 2100 2100 2100
dpm f9d411 5 5 5 5 5 5
vlt f9d411 975 975 975 975 975 975


GPUs: 1: 30.324 MH/s (3) 2: 30.230 MH/s (1) 3: 30.318 MH/s (1) 4: 30.329 MH/s (4) 5: 30.234 MH/s (1) 6: 30.229 MH/s (3)
GPU1: 39C 89% 102W, GPU2: 51C 89% 85W, GPU3: 42C 89% 102W, GPU4: 42C 89% 101W, GPU5: 51C 89% 89W, GPU6: 50C 89% 84W
GPUs power: 563.0 W
Eth speed: 181.664 MH/s, shares: 13/0/0, time: 0:15

[Pe_Da]

PhoenixMiner 5.4c (release candidate) is ready. You can download PhoenixMiner 5.4c from here (both Windows and Linux versions):

https://mega.nz/folder/DR8ChZCR#vSVph_yXN27g09ge5EqduQ  (MEGA)

If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvidia cards under Windows):

Code:

   File: PhoenixMiner_5.4c_Windows.zip
    ===================================
   SHA-1: 191f35a6f90c5caa9c95813a1b1737e642f73c67
 SHA-256: 4599daac32507079c96d43ed0f401c09a0d362a59dd7aa828bc8203148f3d193
 SHA-512: 0ed90d35cbe5d04f2c0a0717b1d5f199a79e281b2590687d2448867f3c8fbceb7062c85833653f9c879c6d7b254460eb3f8bcda89f9aa9892a738bc850fdb72a

    File: PhoenixMiner_5.4c_Linux.tar.gz
    ====================================
   SHA-1: f2341079baacdc75e12c7c8976ab25acaa3acaaa
 SHA-256: da3801a37d561bde30bc2b2083310bc2f3e8b2ea674fa0555e3af5d90e3ade2c
 SHA-512: 265db5f014bbfce03bfbc15d8cfbf255903b95f7232f1a9d50a90bae9f49c40786c3644210f4fbad88180c23ab8f7a9937dcc4b63dd53b437522dde5f2ff722f

    File: PhoenixMiner_NVRTC_Windows.zip
    ====================================
   SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
 SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
 SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4

The changes in this release (since 5.4b) include the following:

• Added support for DAG epochs up to 500
• Fixed crash (or GPUs not detected error) when using the latest Windows Nvidia drivers 460.79 and 460.89
• Validated support for Nvidia RTX 3090, 3080, 3070, and 3060Ti GPUs. Those still use the current kernels and there are no speed increases from the previous PhoenixMiner release
• Add support for the older AMD Linux driver 19.50-1011208-ubuntu-18.04 (used by some Linux mining OSes and other software)
• Added new kernels to allow mining on AMD Hawaii cards (R9 390, etc.) with the current and future DAG epochs (even with DAG buffer above 4GB for the 8GB cards). Note that the AMD Windows drivers do not support compute mode for Hawaii cards, so the hashrate will be quite low (14-15 MH/s with the current ETH DAG epoch). This problem is fixed under Linux, where you can get the full 29-30 MH/s speed out of the Hawaii cards.

The changes of the previous beta (5.4b) since the last version (5.3b) are:

• New kernels for AMD Vega and Navi GPUs that are slightly faster when the DAG buffer is approaching or passing 4GB in size (the current ETH DAG is close to 4GB). To use these new kernels, you need to use drivers 20.5.1 or later under Win10, or 20.10.x or later under Linux
• Automatic re-running auto-tune as needed when switching to a different DAG buffer type (e.g. when switching from ETH to ETC, or back)
• Added support for the latest AMD Windows 10 drivers 20.12.1 and 20.11.3
• Fixed crash when trying to set -mvddc on very old AMD drivers (including the beta blockchain drivers from 2017)
• Other small fixes and improvements

Some notes on the best (or at least some of the better) drivers for AMD cards:

• If you have 6GB or 8GB card that is at least Polaris (i.e. 470/480/570/580, Vega, Radeon VII, Navi), you should run at least driver 20.5.1 under Windows 10, or driver 20.10.x under Linux.
• If you have 4GB Polaris card (i.e. 470/480/570/580), ideally you should also run drivers 20.5.1 or later. At the very least the drivers should be either 18.12.1.1 to 19.7.5 (inclusive), or 19.12.2 and later. Under Linux, drivers 19.x.x or 20.x.x should be OK for 4GB cards.
• Avoid using the 20.40.x, and 20.45.x drivers under Linux.

Please let us know if you have any problems or questions related to PhoenixMiner 5.4c

Unfortunately still incorrect shares with my radeon RX6800. To bad, switch back to lolminer, they runs quite good ....

[ManuBBXX]

Unfortunately still incorrect shares with my radeon RX6800. To bad, switch back to lolminer, they runs quite good ....

Nothing related, but.. what hashrate can you get with your (wonderful) 6800 ?
And congrats for having grabbed it

[Pe_Da]

Unfortunately still incorrect shares with my radeon RX6800. To bad, switch back to lolminer, they runs quite good ....

Nothing related, but.. what hashrate can you get with your (wonderful) 6800 ?
And congrats for having grabbed it

Thanks, OC&UV about 63-65 MH/s fluctuating with PhoenixMiner but with some defect shares. Not so with Nanominer, Lolminer and Gminer.

[MAX-M4]

When I put -rxboost 1 on bat file, I've this error
https://prnt.sc/vogc65

[Kiawpqe]

When I put -rxboost 1 on bat file, I've this error
https://prnt.sc/vogc65

rxboost 1 is good =  vrm 25
but your error is not opening PM as administrator

[abg00]

When I put -rxboost 1 on bat file, I've this error
https://prnt.sc/vogc65

not supported card

[Cryptomining2003]

thx for updating to 5.4C ! I got my new 3060ti today and mining didnt work...then I saw that there´s a new beta....now it works !!!
now I can mine with my rig and my gaming pc

[dubignyp]

Nvidia 460 driver is wrong with version 5.3b
It is necessary to keep that of the version Nvidia 456, waiting for a new version of miner.
The miner tells me that it does not recognize the GPU in version 460.

[kiki456]

Hello,

No workaround yet for Nvidia 1070? from 32-33 the speed dropped to 25-26.
I remember years ago when we started with this mining it was an issue for AMD cards but still RX 580 performance is ~ 30-31, way better than Nvidia .

Thanks

Try to set parameter

-eres 1

if will not work, then

-eres 0

It helped for me. Look at my messages before in this thread

I try this, not help me. I have always 29,8MH on gtx 1070, before I have 32MH,

Your case is not my one. And it is because calculating becames more complicated. PM developers said that it is a problem of NVidia cards. A year ago or about that I also had 192Mh on 6 cards. MC was +640, PL was 64%, CC was +102 and it costed 750W.

But beginning from about one year ago (may be less) I have time to time decreasing of hashrate and memory overclocking beginning from some values does not increase hashrate. For example now I use for some cards MC +450, but if I will use +640, nothing will bw changed. Moreover, hashrate can be less then if I use +450. So now I have stable 180Mh on 6 cards. And now I use PL 100%, also for one card CC was decreased to +70 (more bigger values does not increase hashrate). And now 180Mh costs me 1000W.

Problem that I was talk about is that MC changes does nothing at all. So with my current settings of CC and PL I had 127Mh on 6 cards.

When I used "-eres 0" (now I use "-eres 1", which also works good) my hashrate was back to 180Mh and hashrate again depends on MC values.

So we are talking about different problems.

Yes, now I understand, we are talking od different problems. Sorry.

I have rig with gtx 1060 6GB. On this card no droping speed on Claymore 25MH CC+120 MC +590, in PM i have 24MH. This is same tehnology as 1070, but no drop speed. How to explan it?

[oniskin]

PhoenixMiner 5.4c (release candidate) is ready. You can download PhoenixMiner 5.4c from here (both Windows and Linux versions):

https://mega.nz/folder/DR8ChZCR#vSVph_yXN27g09ge5EqduQ  (MEGA)

If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvidia cards under Windows):

Code:

    File: PhoenixMiner_5.4c_Windows.zip
    ===================================
   SHA-1: 191f35a6f90c5caa9c95813a1b1737e642f73c67
 SHA-256: 4599daac32507079c96d43ed0f401c09a0d362a59dd7aa828bc8203148f3d193
 SHA-512: 0ed90d35cbe5d04f2c0a0717b1d5f199a79e281b2590687d2448867f3c8fbceb7062c85833653f9c879c6d7b254460eb3f8bcda89f9aa9892a738bc850fdb72a

    File: PhoenixMiner_5.4c_Linux.tar.gz
    ====================================
   SHA-1: f2341079baacdc75e12c7c8976ab25acaa3acaaa
 SHA-256: da3801a37d561bde30bc2b2083310bc2f3e8b2ea674fa0555e3af5d90e3ade2c
 SHA-512: 265db5f014bbfce03bfbc15d8cfbf255903b95f7232f1a9d50a90bae9f49c40786c3644210f4fbad88180c23ab8f7a9937dcc4b63dd53b437522dde5f2ff722f

    File: PhoenixMiner_NVRTC_Windows.zip
    ====================================
   SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
 SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
 SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4

The changes in this release (since 5.4b) include the following:

• Added support for DAG epochs up to 500
• Fixed crash (or GPUs not detected error) when using the latest Windows Nvidia drivers 460.79 and 460.89
• Validated support for Nvidia RTX 3090, 3080, 3070, and 3060Ti GPUs. Those still use the current kernels and there are no speed increases from the previous PhoenixMiner release
• Add support for the older AMD Linux driver 19.50-1011208-ubuntu-18.04 (used by some Linux mining OSes and other software)
• Added new kernels to allow mining on AMD Hawaii cards (R9 390, etc.) with the current and future DAG epochs (even with DAG buffer above 4GB for the 8GB cards). Note that the AMD Windows drivers do not support compute mode for Hawaii cards, so the hashrate will be quite low (14-15 MH/s with the current ETH DAG epoch). This problem is fixed under Linux, where you can get the full 29-30 MH/s speed out of the Hawaii cards.

The changes of the previous beta (5.4b) since the last version (5.3b) are:

• New kernels for AMD Vega and Navi GPUs that are slightly faster when the DAG buffer is approaching or passing 4GB in size (the current ETH DAG is close to 4GB). To use these new kernels, you need to use drivers 20.5.1 or later under Win10, or 20.10.x or later under Linux
• Automatic re-running auto-tune as needed when switching to a different DAG buffer type (e.g. when switching from ETH to ETC, or back)
• Added support for the latest AMD Windows 10 drivers 20.12.1 and 20.11.3
• Fixed crash when trying to set -mvddc on very old AMD drivers (including the beta blockchain drivers from 2017)
• Other small fixes and improvements

Some notes on the best (or at least some of the better) drivers for AMD cards:

• If you have 6GB or 8GB card that is at least Polaris (i.e. 470/480/570/580, Vega, Radeon VII, Navi), you should run at least driver 20.5.1 under Windows 10, or driver 20.10.x under Linux.
• If you have 4GB Polaris card (i.e. 470/480/570/580), ideally you should also run drivers 20.5.1 or later. At the very least the drivers should be either 18.12.1.1 to 19.7.5 (inclusive), or 19.12.2 and later. Under Linux, drivers 19.x.x or 20.x.x should be OK for 4GB cards.
• Avoid using the 20.40.x, and 20.45.x drivers under Linux.

Please let us know if you have any problems or questions related to PhoenixMiner 5.4c

1.command "-straps" does not apply to nvidia cards p106-100, in the log file shows that the command applied only to cards 1060,1070ti (580 card is disabled from applying this command)
2.AMD card does not apply command "-tmax 70" (it is not critical)

bat file:
PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 eu1.ethermine.org:4444 -wal 0x2eb6bd2a8fada38a0d95cac98ed6447f5e893edd.asus -coin eth -mode 1 -nvKernel 3 -mi 12 -cdm 0 -retrydelay 45 -rvram -1 -eres 0 -astats 1 -tmax 70 -rmode 2 -pidle 100 -prate 0.062 -straps 0,1,1,1,1 -nvmem 1
pause

log file:
2020.12.19:12:23:12.663: main Phoenix Miner 5.4c Windows/msvc - Release build
2020.12.19:12:23:12.663: main Cmd line: -pool ssl://eu1.ethermine.org:5555 -pool2 eu1.ethermine.org:4444 -wal 0x2eb6bd2a8fada38a0d95cac98ed6447f5e893edd.asus -coin eth -mode 1 -nvKernel 3 -mi 12 -cdm 0 -retrydelay 45 -rvram -1 -eres 0 -astats 1 -tmax 70 -rmode 2 -pidle 100 -prate 0.062 -straps 0,1,1,1,1 -nvmem 1
2020.12.19:12:23:13.289: main CUDA version: 11.0, CUDA runtime: 8.0
2020.12.19:12:23:15.401: main OpenCL driver version: 20.11.2
2020.12.19:12:23:15.424: main Available GPUs for mining:
2020.12.19:12:23:15.424: main GPU1: Radeon RX 580 Series (pcie 1), OpenCL 2.0, 8 GB VRAM, 36 CUs
2020.12.19:12:23:15.424: main GPU2: GeForce GTX 1070 Ti (pcie 2), CUDA cap. 6.1, 8 GB VRAM, 19 CUs
2020.12.19:12:23:15.424: main GPU3: P106-100 (pcie 3), CUDA cap. 6.1, 5.9 GB VRAM, 10 CUs
2020.12.19:12:23:15.424: main GPU4: GeForce GTX 1060 6GB (pcie 4), CUDA cap. 6.1, 6 GB VRAM, 10 CUs
2020.12.19:12:23:15.424: main GPU5: P106-100 (pcie 5), CUDA cap. 6.1, 5.9 GB VRAM, 10 CUs
2020.12.19:12:23:15.424: main ADL library initialized
2020.12.19:12:23:15.453: main NVML library initialized
2020.12.19:12:23:15.520: main Nvidia driver version: 457.30
2020.12.19:12:23:19.120: main Eth: Loading pools from epools.txt
2020.12.19:12:23:19.135: main Eth: the pool list contains 9 pools (2 from command-line)
2020.12.19:12:23:19.135: main Eth: primary pool: ssl://eu1.ethermine.org:5555
2020.12.19:12:23:19.135: main Starting GPU mining
2020.12.19:12:23:19.135: main Matched GPU1 to ADL adapter index 0 (method 1)
2020.12.19:12:23:19.180: main GPU1: AMD driver 20.11.2
2020.12.19:12:23:19.180: main GPU1: Created ADL monitor for adapter 0; overdrive version: 7 (7)
2020.12.19:12:23:19.180: main GPU1: using AMD driver ver 20.11.2
2020.12.19:12:23:19.189: main GPU3: unable to init NvAPI with bus ID 196608
2020.12.19:12:23:19.189: main GPU5: unable to init NvAPI with bus ID 327680
2020.12.19:12:23:19.267: hwmc GPU1: Unable to set max temp 70C (max temp remains 80C)
2020.12.19:12:23:19.267: hwmc GPU1: set power limit 0% (80C max temp)
2020.12.19:12:23:19.381: hwmc GPU2: Set thermal limit to 70 C
2020.12.19:12:23:19.383: hwmc GPU4: Set thermal limit to 70 C
2020.12.19:12:23:19.438: wdog Starting watchdog thread
2020.12.19:12:23:20.333: main Eth: Connecting to ethash pool ssl://eu1.ethermine.org:5555 (proto: EthProxy)
2020.12.19:12:23:20.333: main GPU1: 35C 43% 5W, GPU2: 35C 44% 7W, GPU3: 33C 43% 6W, GPU4: 43C 49% 6W, GPU5: 33C 42% 5W
GPUs power: 28.1 W; total power: 128.1 W; cost: 0.19 USD/day
2020.12.19:12:23:20.462: eths Eth: Connected to SSL ethash pool eu1.ethermine.org:5555 (172.65.207.106)
2020.12.19:12:23:20.652: eths Eth: Send: {"id":1,"jsonrpc":"2.0","method":"eth_submitLogin","worker":"eth1.0","params":["0x2eb6bd2a8fada38a0d95cac98ed6447f5e893edd.asus"]}

2020.12.19:12:23:20.754: eths Eth: Received: {"id":1,"jsonrpc":"2.0","result":true}
2020.12.19:12:23:20.754: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2020.12.19:12:23:20.855: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xbc96271800528dc3570e19cf1393d6c88d256f1130b13932db756dea66109cb9","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37db"]}
2020.12.19:12:23:20.855: eths Eth: New job #bc962718 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:23:20.857: GPU1 GPU1: Starting up... (0)
2020.12.19:12:23:20.857: GPU1 GPU1: Generating ethash light cache for epoch #382
2020.12.19:12:23:20.859: GPU2 GPU2: Starting up... (0)
2020.12.19:12:23:20.876: GPU3 GPU3: Starting up... (0)
2020.12.19:12:23:20.893: GPU4 GPU4: Starting up... (0)
2020.12.19:12:23:20.907: GPU5 GPU5: Starting up... (0)
2020.12.19:12:23:22.287: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x7901e983aa13e7aeb874370214021d68edf251dcea9b68ac014b7c90cfc08394","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37db"]}
2020.12.19:12:23:22.288: eths Eth: New job #7901e983 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:23:24.902: GPU1 Light cache generated in 4.0 s (15.8 MB/s)
2020.12.19:12:23:25.304: GPU3 GPU3: Allocating DAG for epoch #382 (3.98) GB
2020.12.19:12:23:25.310: GPU5 GPU5: Allocating DAG for epoch #382 (3.98) GB
2020.12.19:12:23:25.421: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2020.12.19:12:23:25.421: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0)
2020.12.19:12:23:25.562: GPU3 GPU3: Generating DAG for epoch #382
2020.12.19:12:23:25.906: GPU5 GPU5: Generating DAG for epoch #382
2020.12.19:12:23:25.989: GPU1 GPU1: Free VRAM: 7.948 GB; used: 0.052 GB
2020.12.19:12:23:25.989: GPU1 GPU1: Allocating DAG for epoch #382 (3.98) GB
2020.12.19:12:23:26.000: GPU1 GPU1: Generating DAG for epoch #382
2020.12.19:12:23:26.275: GPU4 GPU4: Allocating DAG for epoch #382 (3.98) GB
2020.12.19:12:23:26.281: GPU2 GPU2: Allocating DAG for epoch #382 (3.98) GB
2020.12.19:12:23:26.303: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xa518b84b570a5f6e645704a62127e7ad91aa42fc2947b40c76313852d52a9d1f","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37db"]}
2020.12.19:12:23:26.303: eths Eth: New job #a518b84b from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:23:26.423: GPU4 GPU4: Generating DAG for epoch #382
2020.12.19:12:23:26.427: GPU2 GPU2: Generating DAG for epoch #382
2020.12.19:12:23:27.571: GPU3 GPU3: DAG   9%
2020.12.19:12:23:27.861: GPU1 GPU1: DAG  21%
2020.12.19:12:23:27.896: GPU5 GPU5: DAG   9%
2020.12.19:12:23:28.121: GPU4 GPU4: DAG   8%
2020.12.19:12:23:28.169: GPU2 GPU2: DAG  13%
2020.12.19:12:23:29.227: GPU3 GPU3: DAG  20%
2020.12.19:12:23:29.368: GPU1 GPU1: DAG  43%
2020.12.19:12:23:29.540: GPU5 GPU5: DAG  20%
2020.12.19:12:23:29.638: GPU4 GPU4: DAG  17%
2020.12.19:12:23:29.745: GPU2 GPU2: DAG  27%
2020.12.19:12:23:30.300: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x3ffe5052db5743c81ec2a2522153575ca2a6846a4fdd909e3ae972fa4e81c77f","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37db"]}
2020.12.19:12:23:30.300: eths Eth: New job #3ffe5052 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:23:30.499: main Eth speed: 0.000 MH/s, shares: 0/0/0, time: 0:00
2020.12.19:12:23:30.499: main GPUs: 1: 0.000 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0)
2020.12.19:12:23:30.656: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2020.12.19:12:23:30.758: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x3ffe5052db5743c81ec2a2522153575ca2a6846a4fdd909e3ae972fa4e81c77f","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37db"]}
2020.12.19:12:23:30.876: GPU1 GPU1: DAG  64%
2020.12.19:12:23:30.882: GPU3 GPU3: DAG  31%
2020.12.19:12:23:31.155: GPU4 GPU4: DAG  27%
2020.12.19:12:23:31.183: GPU5 GPU5: DAG  31%
2020.12.19:12:23:31.323: GPU2 GPU2: DAG  41%
2020.12.19:12:23:32.379: GPU1 GPU1: DAG  81%
2020.12.19:12:23:32.538: GPU3 GPU3: DAG  42%
2020.12.19:12:23:32.673: GPU4 GPU4: DAG  36%
2020.12.19:12:23:32.831: GPU5 GPU5: DAG  42%
2020.12.19:12:23:32.834: GPU2 GPU2: DAG  52%
2020.12.19:12:23:33.873: GPU1 GPU1: DAG generated in 7.9 s (518.3 MB/s)
2020.12.19:12:23:33.875: GPU1 GPU1: Using Ethash OCL kernels (Ellesmere; -clkernel 1)
2020.12.19:12:23:33.875: GPU1 GPU1: no -gt value specified, switching to auto-tune
2020.12.19:12:23:33.875: GPU1 GPU1: starting auto-tune process
2020.12.19:12:23:34.190: GPU4 GPU4: DAG  45%
2020.12.19:12:23:34.265: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x6bc283414018a2c666b1e8fcbf3a207a97934595797958d53cdd2981ef962365","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37db"]}
2020.12.19:12:23:34.265: eths Eth: New job #6bc28341 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:23:34.325: GPU3 GPU3: DAG  50%
2020.12.19:12:23:34.410: GPU2 GPU2: DAG  66%
2020.12.19:12:23:34.588: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x0e4620f53122dd75705d268eefda479ef4f080975e6bb3b2bdb44be3038ef9bb","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37dc"]}
2020.12.19:12:23:34.589: eths Eth: New job #0e4620f5 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:23:34.637: GPU5 GPU5: DAG  50%
2020.12.19:12:23:34.707: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x5aa6f9c17480f001790dc94b65edc69f00b52ee9d813d70a6bcfd58526fbb41f","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37dc"]}
2020.12.19:12:23:34.707: eths Eth: New job #5aa6f9c1 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:23:35.577: main Eth speed: 24.021 MH/s, shares: 0/0/0, time: 0:00
2020.12.19:12:23:35.577: main GPUs: 1: 24.021 MH/s (0) 2: 0.000 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0)
2020.12.19:12:23:35.745: GPU4 GPU4: DAG  53%
2020.12.19:12:23:35.985: GPU3 GPU3: DAG  61%
2020.12.19:12:23:35.986: GPU2 GPU2: DAG  80%
2020.12.19:12:23:36.282: GPU5 GPU5: DAG  61%
2020.12.19:12:23:37.263: GPU4 GPU4: DAG  63%
2020.12.19:12:23:37.563: GPU2 GPU2: DAG  94%
2020.12.19:12:23:37.658: GPU3 GPU3: DAG  72%
2020.12.19:12:23:37.929: GPU5 GPU5: DAG  72%
2020.12.19:12:23:38.254: GPU2 GPU2: DAG generated in 11.8 s (345.0 MB/s)
2020.12.19:12:23:38.269: GPU2 GPU2: Using v3 Ethash CUDA kernels (GeForce GTX 1070 Ti)
2020.12.19:12:23:38.677: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xc8e3ae7f5a7cad4ef9dba21d1a7168555a4923a3419096e832c303dc3d4109c3","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37dc"]}
2020.12.19:12:23:38.677: eths Eth: New job #c8e3ae7f from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:23:38.780: GPU4 GPU4: DAG  72%
2020.12.19:12:23:39.317: GPU3 GPU3: DAG  83%
2020.12.19:12:23:39.573: GPU5 GPU5: DAG  83%
2020.12.19:12:23:40.298: GPU4 GPU4: DAG  81%
2020.12.19:12:23:40.655: main Eth speed: 59.395 MH/s, shares: 0/0/0, time: 0:00
2020.12.19:12:23:40.655: main GPUs: 1: 27.314 MH/s (0) 2: 32.081 MH/s (0) 3: 0.000 MH/s (0) 4: 0.000 MH/s (0) 5: 0.000 MH/s (0)
2020.12.19:12:23:40.671: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2020.12.19:12:23:40.671: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0","0x3237aacd883c8531fca40642e8ca89279bc9bf5bd2853668c87e8d0d3de615bb"]}

2020.12.19:12:23:40.773: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xc8e3ae7f5a7cad4ef9dba21d1a7168555a4923a3419096e832c303dc3d4109c3","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37dc"]}
2020.12.19:12:23:40.978: GPU3 GPU3: DAG  94%
2020.12.19:12:23:41.218: GPU5 GPU5: DAG  94%
2020.12.19:12:23:41.814: GPU4 GPU4: DAG  91%
2020.12.19:12:23:42.027: GPU3 GPU3: DAG generated in 16.5 s (247.8 MB/s)
2020.12.19:12:23:42.258: GPU5 GPU5: DAG generated in 16.4 s (249.5 MB/s)
2020.12.19:12:23:42.261: GPU3 GPU3: Using v3 Ethash CUDA kernels (P106-100)
2020.12.19:12:23:42.267: GPU5 GPU5: Using v3 Ethash CUDA kernels (P106-100)
2020.12.19:12:23:42.885: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x293ecdd2bdf017796c0ac73db2ea149ac787089b718f8021eb79c88f86658145","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37dc"]}
2020.12.19:12:23:42.885: eths Eth: New job #293ecdd2 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:23:43.256: GPU4 GPU4: DAG generated in 16.8 s (242.4 MB/s)
2020.12.19:12:23:43.264: GPU4 GPU4: Using v3 Ethash CUDA kernels (GeForce GTX 1060 6GB)
2020.12.19:12:23:45.733: main Eth speed: 127.688 MH/s, shares: 0/0/0, time: 0:00
2020.12.19:12:23:45.733: main GPUs: 1: 25.042 MH/s (0) 2: 32.085 MH/s (0) 3: 23.256 MH/s (0) 4: 23.455 MH/s (0) 5: 23.850 MH/s (0)
2020.12.19:12:23:46.651: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x5781f7745594128490799c1ef723107d73c66bb4bb9f795d0fc1cbae11c3b9fb","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37dc"]}
2020.12.19:12:23:46.651: eths Eth: New job #5781f774 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:23:47.221: GPU3 Eth: GPU3: ETH share found!
2020.12.19:12:23:47.221: eths Eth: Send: {"id":4,"jsonrpc":"2.0","method":"eth_submitWork","params":["0xdad5d42776458c36","0x5781f7745594128490799c1ef723107d73c66bb4bb9f795d0fc1cbae11c3b9fb","0x6b783b719d6c12379652307b08cca9059385d52af508eabc8cea179c658e76ae"]}

2020.12.19:12:23:47.221: eths Eth: Share actual difficulty: 8794 MH
2020.12.19:12:23:47.327: eths Eth: Received: {"id":6,"jsonrpc":"2.0","result":true}
2020.12.19:12:23:47.327: eths Eth: Received: {"id":4,"jsonrpc":"2.0","result":true}
2020.12.19:12:23:47.327: eths Eth: Share accepted in 106 ms
2020.12.19:12:23:47.561: main GPU1: 43C 49% 65W, GPU2: 43C 49% 108W, GPU3: 42C 49% 85W, GPU4: 49C 56% 81W, GPU5: 43C 49% 82W
GPUs power: 420.8 W; total power: 520.8 W; cost: 0.78 USD/day
2020.12.19:12:23:49.061: hwmc GPU2: set VRAM strap 1 (-vmt1 25 -vmt2 20 -vmt3 0 -vmr 33)
2020.12.19:12:23:50.681: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x75ed0c56c466da0437e8eac30f70c6be2d0d21612a57c2ae55932155bbf663de","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37dc"]}
2020.12.19:12:23:50.681: eths Eth: New job #75ed0c56 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:23:50.686: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2020.12.19:12:23:50.788: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x75ed0c56c466da0437e8eac30f70c6be2d0d21612a57c2ae55932155bbf663de","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37dc"]}
2020.12.19:12:23:50.811: main Eth speed: 126.429 MH/s, shares: 1/0/0, time: 0:00
2020.12.19:12:23:50.811: main GPUs: 1: 23.553 MH/s (0) 2: 32.113 MH/s (0) 3: 23.345 MH/s (1) 4: 23.455 MH/s (0) 5: 23.963 MH/s (0)
2020.12.19:12:23:53.702: hwmc GPU4: set VRAM strap 1 (-vmt1 25 -vmt2 20 -vmt3 0 -vmr 33)
2020.12.19:12:23:54.637: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x16b096cc8a873a0cab67d3b82ef0623da683502fb6053b6ed853d40da2b97c6c","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37dc"]}
2020.12.19:12:23:54.637: eths Eth: New job #16b096cc from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:23:55.889: main Eth speed: 125.773 MH/s, shares: 1/0/0, time: 0:00
2020.12.19:12:23:55.889: main GPUs: 1: 22.709 MH/s (0) 2: 32.269 MH/s (0) 3: 23.355 MH/s (1) 4: 23.467 MH/s (0) 5: 23.973 MH/s (0)
2020.12.19:12:23:58.630: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x80e7247b1b391ce31c5d4c01f6fcd6e2c2ccb4f9aac9355c987cc503d9e5a775","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37dc"]}
2020.12.19:12:23:58.630: eths Eth: New job #80e7247b from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:24:00.701: eths Eth: Send: {"id":5,"jsonrpc":"2.0","method":"eth_getWork","params":[]}

2020.12.19:12:24:00.701: eths Eth: Send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x0","0x3237aacd883c8531fca40642e8ca89279bc9bf5bd2853668c87e8d0d3de615bb"]}

2020.12.19:12:24:00.803: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0x80e7247b1b391ce31c5d4c01f6fcd6e2c2ccb4f9aac9355c987cc503d9e5a775","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37dc"]}
2020.12.19:12:24:00.967: main Eth speed: 130.035 MH/s, shares: 1/0/0, time: 0:00
2020.12.19:12:24:00.967: main GPUs: 1: 26.717 MH/s (0) 2: 32.437 MH/s (0) 3: 23.371 MH/s (1) 4: 23.515 MH/s (0) 5: 23.995 MH/s (0)
2020.12.19:12:24:02.530: hwmc GPU1: Unable to set max temp 70C (max temp remains 80C)
2020.12.19:12:24:02.530: hwmc GPU1: set power limit 0% (80C max temp)
2020.12.19:12:24:02.644: eths Eth: Received: {"id":0,"jsonrpc":"2.0","result":["0xe17e1183cc67ed924850a8989845ac84378420da11a8da0ff3a7253c758d8373","0xd3d0aa11197dcdcfcb3ad3c73d415af47299bddb47fda6081d31d9dd06462f6a","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0xaf37dc"]}
2020.12.19:12:24:02.644: eths Eth: New job #e17e1183 from ssl://eu1.ethermine.org:5555; diff: 4000MH
2020.12.19:12:24:05.435: main 

[sxemini]

PhoenixMiner 5.4c (release candidate) is ready. You can download PhoenixMiner 5.4c from here (both Windows and Linux versions):

https://mega.nz/folder/DR8ChZCR#vSVph_yXN27g09ge5EqduQ  (MEGA)

If you want to check the integrity of the downloaded file, please use the following hashes (you need the last file PhoenixMiner_NVRTC_Windows.zip only if you want to mine BCI with Nvidia cards under Windows):

Code:

    File: PhoenixMiner_5.4c_Windows.zip
    ===================================
   SHA-1: 191f35a6f90c5caa9c95813a1b1737e642f73c67
 SHA-256: 4599daac32507079c96d43ed0f401c09a0d362a59dd7aa828bc8203148f3d193
 SHA-512: 0ed90d35cbe5d04f2c0a0717b1d5f199a79e281b2590687d2448867f3c8fbceb7062c85833653f9c879c6d7b254460eb3f8bcda89f9aa9892a738bc850fdb72a

    File: PhoenixMiner_5.4c_Linux.tar.gz
    ====================================
   SHA-1: f2341079baacdc75e12c7c8976ab25acaa3acaaa
 SHA-256: da3801a37d561bde30bc2b2083310bc2f3e8b2ea674fa0555e3af5d90e3ade2c
 SHA-512: 265db5f014bbfce03bfbc15d8cfbf255903b95f7232f1a9d50a90bae9f49c40786c3644210f4fbad88180c23ab8f7a9937dcc4b63dd53b437522dde5f2ff722f

    File: PhoenixMiner_NVRTC_Windows.zip
    ====================================
   SHA-1: ff6fa5e018adbd52caf631c42b7c2fac7ce48a51
 SHA-256: 8087757169405d51ea8ba818347fb05d0450aef985c29272165070346eb5a54a
 SHA-512: 7b2d832f7f40578bb1f501d5174467f5ae06612e601dab769fd56d39da48a471b18c6373435a485155f70fec4017d8378797bf1e1dfe5d62fee30fa6a1d992c4

The changes in this release (since 5.4b) include the following:

• Added support for DAG epochs up to 500
• Fixed crash (or GPUs not detected error) when using the latest Windows Nvidia drivers 460.79 and 460.89
• Validated support for Nvidia RTX 3090, 3080, 3070, and 3060Ti GPUs. Those still use the current kernels and there are no speed increases from the previous PhoenixMiner release
• Add support for the older AMD Linux driver 19.50-1011208-ubuntu-18.04 (used by some Linux mining OSes and other software)
• Added new kernels to allow mining on AMD Hawaii cards (R9 390, etc.) with the current and future DAG epochs (even with DAG buffer above 4GB for the 8GB cards). Note that the AMD Windows drivers do not support compute mode for Hawaii cards, so the hashrate will be quite low (14-15 MH/s with the current ETH DAG epoch). This problem is fixed under Linux, where you can get the full 29-30 MH/s speed out of the Hawaii cards.

The changes of the previous beta (5.4b) since the last version (5.3b) are:

• New kernels for AMD Vega and Navi GPUs that are slightly faster when the DAG buffer is approaching or passing 4GB in size (the current ETH DAG is close to 4GB). To use these new kernels, you need to use drivers 20.5.1 or later under Win10, or 20.10.x or later under Linux
• Automatic re-running auto-tune as needed when switching to a different DAG buffer type (e.g. when switching from ETH to ETC, or back)
• Added support for the latest AMD Windows 10 drivers 20.12.1 and 20.11.3
• Fixed crash when trying to set -mvddc on very old AMD drivers (including the beta blockchain drivers from 2017)
• Other small fixes and improvements

Some notes on the best (or at least some of the better) drivers for AMD cards:

• If you have 6GB or 8GB card that is at least Polaris (i.e. 470/480/570/580, Vega, Radeon VII, Navi), you should run at least driver 20.5.1 under Windows 10, or driver 20.10.x under Linux.
• If you have 4GB Polaris card (i.e. 470/480/570/580), ideally you should also run drivers 20.5.1 or later. At the very least the drivers should be either 18.12.1.1 to 19.7.5 (inclusive), or 19.12.2 and later. Under Linux, drivers 19.x.x or 20.x.x should be OK for 4GB cards.
• Avoid using the 20.40.x, and 20.45.x drivers under Linux.

Please let us know if you have any problems or questions related to PhoenixMiner 5.4c

Hello Phönixminer, please add worker to etc hash, we can´t set worker name in etc hash. Asked 2 times in the past.

[PhoenixMiner]

(reserved)

[PhoenixMiner]

PhoenixMiner 5.4c is officially released. You can find the download link and the checksums in the first post of this thread.

It is the same release as the one that was posted yesterday, so if you are already running it, there is no need to upgrade.

[sxemini]

PhoenixMiner 5.4c is officially released. You can find the download link and the checksums in the first post of this thread.

It is the same release as the one that was posted yesterday, so if you are already running it, there is no need to upgrade.

Any support or you go the same way like claymore and ignore any questions?