PhoenixMiner 6.2c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)

[P00P135]

Why are newbies even allowed to post links at this point 

[waywoos]

Why not make it you need 25 posts before allowed to post links?

[bccromer]

I’m mining with 9 x 5500xt 8gb. 4 of the cards work fine, but 5 of the cards take 30 minutes to build the DAG. This doesn’t happen with other miners, so I know it’s not a card issue. Any ideas why this happens?

[UnclWish]

I’m mining with 9 x 5500xt 8gb. 4 of the cards work fine, but 5 of the cards take 30 minutes to build the DAG. This doesn’t happen with other miners, so I know it’s not a card issue. Any ideas why this happens?

All cards switched to compute mode?

[Deafran]

Linux Install for EthOS.. Help needed.

I use EthOS and my rigs are mostly with 5.0 or 5.1 PhoenixMiner. I used the Ethos update option. It refers to GitHub for third party miner install script for Ethos. But it updates the PhoenixMiner to 5.3b edition, not the latest 5.4c edition.

I see instructions to download the .exe file for Windows. Can someone point me towards EthOs Install for 5.4c edition without using Ethos miner manager?

Thanks,

reinstall it

bash <(curl -s https://raw.githubusercontent.com/cynixx3/third-party-miner-installer-for-ethos/master/miner-manager) phoenixminer install

i have done it 3 hours ago and it update the PM to latest

[bitquad]

This user just posted mega links to a fake 5.4d version ...
https://bitcointalk.org/index.php?action=profile;u=28890
Is he banned or something ?

Yes I fell for it and downloaded the file before it was removed. Installed it on my rig. Removed it as soon as I discovered it was bogus.

[Tokechan]

Hi, I have rigs with 6 x p106-100 mining edition and they work just fine with 5.3b (on 382.43 driver version).
But when I update miner to 5.4c it simply doesn't start, miner closes in a second.

I tried updating drivers to 460.89 and 5.4c starts but shows me errors:

NVAPI error in NvapiWrapper.c:316 : -6  
Unable to load NvAPI: error 3
GPU1: unable to init NvAPI with bus ID 65536
GPU2: unable to init NvAPI with bus ID 131072
GPU3: unable to init NvAPI with bus ID 196608
GPU4: unable to init NvAPI with bus ID 262144
GPU5: unable to init NvAPI with bus ID 327680
GPU6: unable to init NvAPI with bus ID 393216

What's wrong? Should I either continue to stay on 5.3b and don't update or there's a better driver to work with p106-100?

[Permonik]

Why the radeon VII is still shown that has only 8GB of RAM? And why it fails prealocating DAG and says that there is not enough vram?
THX

[socks435]

What happen to gtx 1070 why I cant get around 31mh/s now the hr is around 23mh/s even increase mmclock and core ican only get around 24. What happen.?

Im currently set it to -straps 4 as what other suggest but no luck...

[Deafran]

What happen to gtx 1070 why I cant get around 31mh/s now the hr is around 23mh/s even increase mmclock and core ican only get around 24. What happen.?

Im currently set it to -straps 4 as what other suggest but no luck...

thats to low, using PM 5.4c

i got 26,8 minimum, with : PL 80 CC +100 MC +400 (after burner)
using "Ehereum-nanopool.bat" - only change the wallet and worker name

maybe ur cards over heat ...

[theerachate.p]

3060 Ti here - works well, unless...

- I set max overclock at start (only incorrect shares are generated - I need to start lower and increase)
- Epoch changes (same result as above)

Please fix.

happens to me as well (RTX3070), I thought it was a bug on the driver or the bios, I was updating/flashing for 2 hours before figured what you just said lol

[lgregori]

What is your hashrate for 3060 TI?
 I have a Zotac with difficulty gives 57 Mh.
 Card marriage or normal?

[Lindstroem]

Hello,
I have 8 5700XT
My Red Devil & Sapphire 5700XT does not respond to fan commands in phoenixminer nor afterburner with the latest AMD drivers. is there a solution or workaround for this? Can’t use Radeon software as it resets fancurve if the computer crashes and I’ve tried going back to January drivers (20.5.1) where Phoenix fan commands work but NiceHash crashes the computer upon startup and there are other problems with using Phoenix directly.

I’ve read about the core temp limiter to downclock to avoid overheating but the problem is memory temps that reach beyond 96C due to the low fan curves without option to adjust them.

Is there a solution or fix in coming versions for this?

[ahsbqt]

Hello,
I have 8 5700XT
My Red Devil & Sapphire 5700XT does not respond to fan commands in phoenixminer nor afterburner with the latest AMD drivers. is there a solution or workaround for this? Can’t use Radeon software as it resets fancurve if the computer crashes and I’ve tried going back to January drivers (20.5.1) where Phoenix fan commands work but NiceHash crashes the computer upon startup and there are other problems with using Phoenix directly.

I’ve read about the core temp limiter to downclock to avoid overheating but the problem is memory temps that reach beyond 96C due to the low fan curves without option to adjust them.

Is there a solution or fix in coming versions for this?

Afterburner 4.6.2 works just fine with saphhire 5700xt pulse and driver 20.8.1

[duketasos]

got a strange prob on my personal computer and one of my rigs. after a day or two teamviewer goes offline (but miner still works for half a day) and in the end this error message appear An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full. Windows 10 latest build drivers: 18.12 and 18.6 . systems have sufficient vram . any suggestions?

[bccromer]

I have a 9 x 5500xt rig. 4 of the cards generate the DAG just fine. The other 5 generate like 1% per minute, meaning it takes a REALLY long time for it to complete. This doesn't happen when I use other miners. Any ideas what might be going on? I prefer Phoenix, but obviously can't use it if that is happening.

Just to give more information, this is running in SMOS. I have tried multiple versions of phoenix back to 5.2e, and I get the same issue.

[waywoos]

Hello,
I have 8 5700XT
My Red Devil & Sapphire 5700XT does not respond to fan commands in phoenixminer nor afterburner with the latest AMD drivers. is there a solution or workaround for this? Can’t use Radeon software as it resets fancurve if the computer crashes and I’ve tried going back to January drivers (20.5.1) where Phoenix fan commands work but NiceHash crashes the computer upon startup and there are other problems with using Phoenix directly.

I’ve read about the core temp limiter to downclock to avoid overheating but the problem is memory temps that reach beyond 96C due to the low fan curves without option to adjust them.

Is there a solution or fix in coming versions for this?

I had this issue.  I think it was 20.1.3 that worked   I used afterburner after that.  None other drivers worked

[doctorman]

3060 Ti here - works well, unless...

- I set max overclock at start (only incorrect shares are generated - I need to start lower and increase)
- Epoch changes (same result as above)

Please fix.

happens to me as well (RTX3070), I thought it was a bug on the driver or the bios, I was updating/flashing for 2 hours before figured what you just said lol

Interesting.. thanks for reporting this.. did you try any other miner see if the same issue persists?
so it is not a driver issue, it is a general rtx 3000 series issue

If I start on +1200 mem clock I can survive  but I still get bunch of invalid shares ,  if i start under +1000mem clock and go up I get no invalid shares even up to 1500+for now I start them at +900 and go up to +1200 since you never know when the Epoch change happens and the whole thing goes down if you have it set above +1250 or so memory clock




I have an MSI and a Zotac  3060 ti ,   Zotac runs hotter and faster , but more prone to invalid shares, same story as above applies to both

I get 59-60 MH on the 900+ mem
and can get close to 64 MH if I go up to +1500 and give it some  power like 66% to 68%

[theerachate.p]

3060 Ti here - works well, unless...

- I set max overclock at start (only incorrect shares are generated - I need to start lower and increase)
- Epoch changes (same result as above)

Please fix.

happens to me as well (RTX3070), I thought it was a bug on the driver or the bios, I was updating/flashing for 2 hours before figured what you just said lol

Interesting.. thanks for reporting this.. did you try any other miner see if the same issue persists?
so it is not a driver issue, it is a general rtx 3000 series issue

If I start on +1200 mem clock I can survive  but I still get bunch of invalid shares ,  if i start under +1000mem clock and go up I get no invalid shares even up to 1500+for now I start them at +900 and go up to +1200 since you never know when the Epoch change happens and the whole thing goes down if you have it set above +1250 or so memory clock




I have an MSI and a Zotac  3060 ti ,   Zotac runs hotter and faster , but more prone to invalid shares, same story as above applies to both

I get 59-60 MH on the 900+ mem
and can get close to 64 MH if I go up to +1500 and give it some  power like 66% to 68%

Here's what I did,
reset every oc settings to stock
start the miner
wait it to load the dag file and everything
let it run for 2-3 minutes
crank the memory oc +1500 in one go

never got invalid shares until it loads the new dag then the issue comes back
hope this help

[UserU]

Why are newbies even allowed to post links at this point 

There's been a wave of spambots posting the same malware. Just avoid them for now.