|
ManuBBXX
|
 |
December 17, 2020, 02:00:49 PM |
|
Same technique here. I start miner for DAG with +1000 And then +1500 with PL55% on my 2 3060ti's Result here : 130W, 62.7 mhs Can't get any higher. I'm satisfied enough though with this  You have to see if that translates to that hashrate at the pool. Yes, hashrate is the same on pool (2miners) |
|
|
|
|
saga56
Newbie
 Offline
Activity: 6
Merit: 0
|
|
December 17, 2020, 02:16:24 PM |
|
Hi there. Having some problems with my RIG (2x rx580 NITRO + 8GB with PhoenixMiner 5.3b Windows) Recently started my RIG again, update the drivers to 19.7.5. The problem is sometimes at startup one GPU get lower hashrate, like 6mh/s, the other one gets normal speeds. What I think is the time to update DAG file in each GPU, one of them get to 100% first. I get 63~64mh/s when both get to start well. Someone have a solution for this? Image attatch https://imgur.com/W187TrN |
|
|
|
|
Littlegrand
Jr. Member
Offline
Activity: 104
Merit: 5
|
|
December 17, 2020, 03:41:18 PM |
|
Ubuntu 20.4 Server AMDpro 20.30 Rx570 4gb
I am having issues with one of my miners.(other miner is same cards) Some of the cards I cannot use as I receive constant errors and when mining I get a few of the same errors here and there. I tried swapping risers and am suspecting maybe a motherboard issue. The error is:
pcieport 0000:00:1b.2: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (TransmitterID)
pcieport 0000:00:1b.2: AER: device [8086:a29a] error status/mask=00001000/00002000
pcieport 0000:00:1b.2: AER: [12] Timeout
On the cards that will not work its a screen full of this then eventually a screen full of:
[drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125
Any ideas?
Thanks
|
|
|
|
|
|
JayDDee
|
|
December 17, 2020, 04:40:19 PM |
|
Ubuntu 20.4 Server AMDpro 20.30 Rx570 4gb
I am having issues with one of my miners.(other miner is same cards) Some of the cards I cannot use as I receive constant errors and when mining I get a few of the same errors here and there. I tried swapping risers and am suspecting maybe a motherboard issue. The error is:
pcieport 0000:00:1b.2: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (TransmitterID)
pcieport 0000:00:1b.2: AER: device [8086:a29a] error status/mask=00001000/00002000
pcieport 0000:00:1b.2: AER: [12] Timeout
On the cards that will not work its a screen full of this then eventually a screen full of:
[drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125
Any ideas?
Thanks
A motherboard problem seems likely or possibly a bad card shorting out the PCIe bus. Test one card at a time in each slot. Anything that changes the problem is suspect. It could be just one slot in which case you could skip that slot if you don't want to buy a new motherboard yet. |
|
|
|
|
alucard20724
|
|
December 17, 2020, 04:48:28 PM |
|
Ubuntu 20.4 Server AMDpro 20.30 Rx570 4gb
I am having issues with one of my miners.(other miner is same cards) Some of the cards I cannot use as I receive constant errors and when mining I get a few of the same errors here and there. I tried swapping risers and am suspecting maybe a motherboard issue. The error is:
pcieport 0000:00:1b.2: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (TransmitterID)
pcieport 0000:00:1b.2: AER: device [8086:a29a] error status/mask=00001000/00002000
pcieport 0000:00:1b.2: AER: [12] Timeout
On the cards that will not work its a screen full of this then eventually a screen full of:
[drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125
Any ideas?
Thanks
A motherboard problem seems likely or possibly a bad card shorting out the PCIe bus. Test one card at a time in each slot. Anything that changes the problem is suspect. It could be just one slot in which case you could skip that slot if you don't want to buy a new motherboard yet. also check all the connectors for the PSU for the pci-e connectors. you might have one going bad...i.e. connectors melting, breaking from continuous use... i.e. wear and tear. |
|
|
|
|
ak313
Newbie
Offline
Activity: 14
Merit: 0
|
|
December 17, 2020, 06:02:16 PM |
|
WHY lolminer is giving better hashrate on ETH with 4G card
phoenix 202 mh
lolminer 222
large difference
|
|
|
|
|
Stihlus
Newbie
Offline
Activity: 31
Merit: 0
|
|
December 17, 2020, 06:23:06 PM |
|
Hello, No workaround yet for Nvidia 1070? from 32-33 the speed dropped to 25-26. I remember years ago when we started with this mining it was an issue for AMD cards but still RX 580 performance is ~ 30-31, way better than Nvidia  . Thanks |
|
|
|
|
Littlegrand
Jr. Member
Offline
Activity: 104
Merit: 5
|
|
December 17, 2020, 06:38:06 PM |
|
Ubuntu 20.4 Server AMDpro 20.30 Rx570 4gb
I am having issues with one of my miners.(other miner is same cards) Some of the cards I cannot use as I receive constant errors and when mining I get a few of the same errors here and there. I tried swapping risers and am suspecting maybe a motherboard issue. The error is:
pcieport 0000:00:1b.2: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (TransmitterID)
pcieport 0000:00:1b.2: AER: device [8086:a29a] error status/mask=00001000/00002000
pcieport 0000:00:1b.2: AER: [12] Timeout
On the cards that will not work its a screen full of this then eventually a screen full of:
[drm:amdgpu_cs_ioctl [amdgpu]] *ERROR* Failed to initialize parser -125
Any ideas?
Thanks
A motherboard problem seems likely or possibly a bad card shorting out the PCIe bus. Test one card at a time in each slot. Anything that changes the problem is suspect. It could be just one slot in which case you could skip that slot if you don't want to buy a new motherboard yet. also check all the connectors for the PSU for the pci-e connectors. you might have one going bad...i.e. connectors melting, breaking from continuous use... i.e. wear and tear. Good advise(I had changed the riser on the wrong card I believe) Just got linux up and running. I have the problem diagnosed down to 2 cards now as I realized that linux does not see the cards the same as windows.... How do I relate PM's gpu number IE(1,2,3,4 etc) to the physical card? I tried stopping the card etc but the fans seem to always run under linux...Any ideas? Thanks |
|
|
|
|
Eid0s
Newbie
Offline
Activity: 1
Merit: 0
|
|
December 17, 2020, 06:51:48 PM |
|
Hello everyone, if you can help me; merci beaucoup !
I tried everything i could think of but i guess i'm really bad with this stuff.
I have a rig 6x580 which works perfectly but i can't seem to make my NVIDIA 1070 mine on my gaming pc.
Anyone has an idea for me ?
I thought it was Windows defender (which i disabled and/or added an exception)
Then i thought it was the driver thingy (explained on the front page) did all the steps and still miner doesnt start.
I have a feeling it's a dumb mistake on my part, any one has a clue ?
(Raised virtual memory to 36k, just in case) nada..
Here is where i get stuck:
---------------------------------------
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_FORCE_64BIT_PTR 0
SUCCESS: Specified value was saved.
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_MAX_HEAP_SIZE 100
SUCCESS: Specified value was saved.
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_USE_SYNC_OBJECTS 1
SUCCESS: Specified value was saved.
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_MAX_ALLOC_PERCENT 100
SUCCESS: Specified value was saved.
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_SINGLE_ALLOC_PERCENT 100
SUCCESS: Specified value was saved.
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>PhoenixMiner.exe -pool eu1.ethermine.org:14444 -pool2 us1.ethermine.org:14444 -wal 0x8F5114f9E496d35fb155cD1B1Fd43aF592e554ed.TinyMiner2 -proto 2 -nvidia -eres 0 -daglim 1
Phoenix Miner 5.3b Windows/msvc - Release build
-----------------------------------------------
CUDA version: 11.0, CUDA runtime: 8.0
Available GPUs for mining:
GPU1: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>pause
Press any key to continue . . .
---------------------------------------------------------------------------------------
What am i forgetting..jeez.
Thanks for any input
|
|
|
|
|
|
br2459
|
|
December 17, 2020, 07:52:02 PM |
|
Hello everyone, if you can help me; merci beaucoup !
I tried everything i could think of but i guess i'm really bad with this stuff.
I have a rig 6x580 which works perfectly but i can't seem to make my NVIDIA 1070 mine on my gaming pc.
Anyone has an idea for me ?
I thought it was Windows defender (which i disabled and/or added an exception)
Then i thought it was the driver thingy (explained on the front page) did all the steps and still miner doesnt start.
I have a feeling it's a dumb mistake on my part, any one has a clue ?
(Raised virtual memory to 36k, just in case) nada..
Here is where i get stuck:
---------------------------------------
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_FORCE_64BIT_PTR 0
SUCCESS: Specified value was saved.
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_MAX_HEAP_SIZE 100
SUCCESS: Specified value was saved.
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_USE_SYNC_OBJECTS 1
SUCCESS: Specified value was saved.
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_MAX_ALLOC_PERCENT 100
SUCCESS: Specified value was saved.
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>setx GPU_SINGLE_ALLOC_PERCENT 100
SUCCESS: Specified value was saved.
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>PhoenixMiner.exe -pool eu1.ethermine.org:14444 -pool2 us1.ethermine.org:14444 -wal 0x8F5114f9E496d35fb155cD1B1Fd43aF592e554ed.TinyMiner2 -proto 2 -nvidia -eres 0 -daglim 1
Phoenix Miner 5.3b Windows/msvc - Release build
-----------------------------------------------
CUDA version: 11.0, CUDA runtime: 8.0
Available GPUs for mining:
GPU1: GeForce GTX 1070 (pcie 1), CUDA cap. 6.1, 8 GB VRAM, 15 CUs
C:\Users\Gab\Desktop\PhoenixMiner_5.3b_Windows_AMD_NVIDIA (Password-phoenix)>pause
Press any key to continue . . .
---------------------------------------------------------------------------------------
What am i forgetting..jeez.
Thanks for any input
Did you download the miner from this forum or from another location? The ones from other locations are malicious.. |
|
|
|
Geniusvzla
Jr. Member
Offline
Activity: 38
Merit: 1
|
|
December 17, 2020, 08:13:16 PM |
|
Hi there. Having some problems with my RIG (2x rx580 NITRO + 8GB with PhoenixMiner 5.3b Windows) Recently started my RIG again, update the drivers to 19.7.5. The problem is sometimes at startup one GPU get lower hashrate, like 6mh/s, the other one gets normal speeds. What I think is the time to update DAG file in each GPU, one of them get to 100% first. I get 63~64mh/s when both get to start well. Someone have a solution for this? Image attatch  Hi, I have those cards in my rigs, that happened to me and I managed to solve it by lowering the memory clock, you can start from 2000 MHz onwards. I don't know what memory model you have (Samsung, Hynix or Micron) or the other configurations. It is important that you check if you are generating memory errors with this HWiNFO64 application because many of the failures come from those memory errors |
|
|
|
|
bit-sokol
Newbie
Offline
Activity: 48
Merit: 0
|
|
December 17, 2020, 08:35:03 PM |
|
Hello everyone, if you can help me; merci beaucoup !
I had this errors with the 460.79 Nvidia driver. I'm waiting for Phoenix's solution and more DAG epoch to be added. |
|
|
|
|
ninenep89
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 17, 2020, 10:05:44 PM |
|
Hi. I just started getting interested in mining. Can I mine Bitcoin on CPU with Phoenix Miner? Thank you for your help.  |
|
|
|
|
Shlimann
Jr. Member
Offline
Activity: 54
Merit: 5
|
|
December 17, 2020, 10:07:50 PM |
|
Hi. I just started getting interested in mining. Can I mine Bitcoin on CPU with Phoenix Miner? Thank you for your help. Try it, Satoshi you have not been interested in mining for a long time) |
|
|
|
|
ninenep89
Newbie
Offline
Activity: 4
Merit: 0
|
|
December 17, 2020, 10:11:51 PM |
|
Hi. I just started getting interested in mining. Can I mine Bitcoin on CPU with Phoenix Miner? Thank you for your help. Try it, Satoshi you have not been interested in mining for a long time) What is Satoshi? I'm asking about Bitcoin and the Phoenix Miner program... |
|
|
|
|
bit-sokol
Newbie
Offline
Activity: 48
Merit: 0
|
|
December 17, 2020, 10:13:27 PM |
|
i see an error:
No available GPUs for mining. Please check your drivers and/or hardware
i use 460.79 Nvidia
|
|
|
|
|
Semtex72
Newbie
Offline
Activity: 55
Merit: 0
|
|
December 17, 2020, 11:01:03 PM |
|
Is there a serious bug in 5.3b? Perhaps its secretly mining dev fee?
Othput is fine against ethermine, everything looks normal. However nothing is reported at the site. Seems to happen after about 24 hours.
We are talking several rigs here...
|
|
|
|
|
lgregori
Newbie
Offline
Activity: 25
Merit: 3
|
|
December 17, 2020, 11:09:07 PM |
|
Is there a serious bug in 5.3b? Perhaps its secretly mining dev fee?
Othput is fine against ethermine, everything looks normal. However nothing is reported at the site. Seems to happen after about 24 hours.
We are talking several rigs here...
most likely this is overclocking |
|
|
|
|
Shlimann
Jr. Member
Offline
Activity: 54
Merit: 5
|
|
December 17, 2020, 11:15:40 PM |
|
I am seriously worried that the developer will disappear like Claymore.
Therefore, you need to add DAG Epoch support to the program in advance.
|
|
|
|
|
|
miner29
|
|
December 17, 2020, 11:17:20 PM |
|
I am seriously worried that the developer will disappear like Claymore.
Therefore, you need to add DAG Epoch support to the program in advance.
The dev doesnt need to do anything. Maybe try asking nicely instead of demanding. The dev owes you nothing. |
|
|
|
|
|
