untalented
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:17:35 PM |
|
Funny but the best settings for hd7950 (1044/1500Mhz) on my rigs is the same like on 280x -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --expiry 10 --scan-time 1 --queue 0 Hd 7950 works ~100khs without HW errors is good for me. Someone maybe have better results on hd7950? here's my sapphire rig 3x 7950's. Also have 3x powercolors they are 125Khs ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FTQTQbut.jpg&t=665&c=hUvuFoKFY82oxQ) good thing I check too; hadn't noticed room temp...whoops I've tried exact multipliers, at least on scrypt, and they never hashed as well as TC's close to them in intervals of about 60 TC. And I can't go above 33,000 wihtout one card getting the error 4 - blah blah blah something about enqueing a kernel. Basically I don't have enough RAM to run 4 cards at a TC higher than 32xxxx. I actually tried 33,792 (approx) and it works okay... except 1 card doesn't load. I actually raised the "-w" because I was having card failures at lower numbers. I typically have never moved it from 256 and thought a lower number would work but it failed worse. Much like when I had 8xxx as the TC, I got nothing but HW for some reason. This N is messing with my cards pretty badly.
did you by chance try doing -G 2 instead? 16,896 and 18,304 and 19,712 just another thought ;P Protagonus Can you post your settings hd7950?
|
|
|
|
nanoprobe
Legendary
Offline
Activity: 980
Merit: 1000
Traveling in subspace
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:18:38 PM |
|
Best settings for me on 280x:
setx GPUMAXALLOCPERCENT 100 setx GPUUSESYNC_OBJECTS 1 ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0
Now getting Rejects. Getting a small % of rejects is normal. It's HW errors that should be 0 I am not getting any Accepts and HW errors.It just finds blocks but not Accepts. Was it working before the N-factor changed?
|
You'll never know what you're living for until you know what you're willing to die for. Never look back, something might be gaining on you.
|
|
|
Ookami999
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:19:26 PM |
|
Anyone have a working config for ASUS R9 280x? Everything I try gives me HW errors. ![Embarrassed](https://bitcointalk.org/Smileys/default/embarrassed.gif) try --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -g 2 -w 256 -I 12 --lookup-gap 2 --thread-concurrency 16484 --gpu-engine 1000 --gpu-memclock 1500Still HW errors. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) 4x Asus R9 280x rig with 4gb of RAM running solid 130kh/s with no HW errors and no Rejects
--thread-concurrency 16484 -g 2 -I 12 -w 256 --lookup-gap 3 --gpu-powertune 20 --gpu-engine 1190 --gpu-memclock 1500
If it helps, donations are appreciated.
UgXqeXFF95SXntHDdHJnBX6SnvjGJmUQGN
Anyone have a working config for ASUS R9 280x? Everything I try gives me HW errors. ![Embarrassed](https://bitcointalk.org/Smileys/default/embarrassed.gif) try --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -g 2 -w 256 -I 12 --lookup-gap 2 --thread-concurrency 16484 --gpu-engine 1000 --gpu-memclock 1500Still HW errors. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Try TC 16 384 instead if 16484 Tried that also. I have tried literally every config I saw here, nothing worked for me. It is strange tho cause before the N-Factor change I had no problems at all. This is my config BTW : --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 --thread-concurrency 16384 -g 2 -I 12 -w 256 --lookup-gap 2 --gpu-memclock 1500 --gpu-engine 1100 --gpu-powertune 20 --temp-cutoff 90 --expiry 1 --scan-time 1 --queue 0 --no-submit-stale --temp-overheat 85 Try lookup-gap 3I love you! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Getting ~ 120kh/s now without HW errors!
|
|
|
|
sameev29
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:20:56 PM |
|
Best settings for me on 280x:
setx GPUMAXALLOCPERCENT 100 setx GPUUSESYNC_OBJECTS 1 ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0
Now getting Rejects. Getting a small % of rejects is normal. It's HW errors that should be 0 I am not getting any Accepts and HW errors.It just finds blocks but not Accepts. Was it working before the N-factor changed? I didnt mine it before.Just trying now. I gave you a message,please look.
|
|
|
|
untalented
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:24:02 PM |
|
Best settings for me on 280x:
setx GPUMAXALLOCPERCENT 100 setx GPUUSESYNC_OBJECTS 1 ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0
Now getting Rejects. Getting a small % of rejects is normal. It's HW errors that should be 0 I am not getting any Accepts and HW errors.It just finds blocks but not Accepts. Use ultraminer from first page https://bitcointalk.org/index.php?topic=413978.0
|
|
|
|
sameev29
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:26:33 PM |
|
Best settings for me on 280x:
setx GPUMAXALLOCPERCENT 100 setx GPUUSESYNC_OBJECTS 1 ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0
Now getting Rejects. Getting a small % of rejects is normal. It's HW errors that should be 0 I am not getting any Accepts and HW errors.It just finds blocks but not Accepts. Use ultraminer from first page https://bitcointalk.org/index.php?topic=413978.0You mean to download 'Windows GPU | Mirror' on first page?
|
|
|
|
nanoprobe
Legendary
Offline
Activity: 980
Merit: 1000
Traveling in subspace
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:28:07 PM |
|
Best settings for me on 280x:
setx GPUMAXALLOCPERCENT 100 setx GPUUSESYNC_OBJECTS 1 ultracoinminer -o stratum+tcp://ultra.nitro.org:3337 -u xxx -p xxx--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -g 2 -I 12 --thread-concurrency 16384 --no-submit-stale --lookup-gap 2 --expiry 10 --scan-time 1 --queue 0
Now getting Rejects. Getting a small % of rejects is normal. It's HW errors that should be 0 I am not getting any Accepts and HW errors.It just finds blocks but not Accepts. Was it working before the N-factor changed? I didnt mine it before.Just trying now. I gave you a message,please look. Replied. Sounds like you're using the wrong version of cgminer.
|
You'll never know what you're living for until you know what you're willing to die for. Never look back, something might be gaining on you.
|
|
|
imginy
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 224
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:29:44 PM |
|
come on lets pump this coin.
I'm putting everything I got in to it.
|
|
|
|
Navyman47
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 96
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:30:54 PM |
|
I love you! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) Getting ~ 120kh/s now without HW errors! ![Kiss](https://bitcointalk.org/Smileys/default/kiss.gif)
|
|
|
|
red5standingby
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:32:27 PM |
|
imginy, if it didn't take forever to get btc from coinbase, I'd be jumping in that pool with you. Hopefully tonight. I hate coinbase.
|
|
|
|
fredeq
Legendary
Offline
Activity: 1537
Merit: 1005
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:34:15 PM |
|
Sigh, I spam for lookup-gap 3 on last 3 pages but noone listens. Are my posts invisible...
Edit: Sorry for bitching, had a rough day.
|
|
|
|
lemfuture
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:37:49 PM |
|
Sigh, I spam for lookup-gap 3 on last 3 pages but noone listens. Are my posts invisible...
or maybe you're blocked? ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
1ADLcfwTofFXb95pKhebpeRkJ4WTWsvQXB
|
|
|
Navyman47
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 96
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:38:04 PM |
|
Sigh, I spam for lookup-gap 3 on last 3 pages but noone listens. Are my posts invisible...
I listened and I thank you. I continued to spread the word.
|
|
|
|
untalented
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:39:19 PM |
|
we need good setting for 290/290x without HW errors. 250 UTC waiting ![Cool](https://bitcointalk.org/Smileys/default/cool.gif)
|
|
|
|
imginy
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 224
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:39:54 PM |
|
imginy, if it didn't take forever to get btc from coinbase, I'd be jumping in that pool with you. Hopefully tonight. I hate coinbase.
Hopefully only way is up from here
|
|
|
|
Ookami999
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:40:54 PM |
|
Sigh, I spam for lookup-gap 3 on last 3 pages but noone listens. Are my posts invisible...
Sorry I did not saw your posts. I love you too then! ![Kiss](https://bitcointalk.org/Smileys/default/kiss.gif) About something else now, does anyone tried CPU mining? I tried with yacoin CPU miner but didn't made it work.
|
|
|
|
NewSapUser
Newbie
Offline
Activity: 52
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:41:28 PM |
|
many HW:
cgminer version 3.7.2 - Started: [2014-03-01 00:17:28] -------------------------------------------------------------------------------- (5s):476.6K (avg):472.5Kh/s | A:4032 R:160 HW:47 WU:270.2/m ST: 2 SS: 0 NB: 31 LW: 2456 GF: 0 RF: 0 Connected to ultra.nitro.org diff 64 with stratum as user *****.3 Block: 3762c0cd... Diff:2 Started: [00:32:07] Best share: 1.98K -------------------------------------------------------------------------------- [P]ool management [G]PU management ettings [D]isplay options [Q]uit GPU 0: 56.0C 2437RPM | 94.58K/94.86Kh/s | A: 768 R: 0 HW: 7 WU: 49.2/m I:16 GPU 1: 44.0C 2359RPM | 94.60K/94.86Kh/s | A:1024 R:64 HW:14 WU: 70.5/m I:16 GPU 2: 56.0C 2378RPM | 94.58K/94.86Kh/s | A: 704 R: 0 HW:11 WU: 45.7/m I:16 GPU 3: 52.0C 2424RPM | 94.60K/94.86Kh/s | A: 736 R: 0 HW: 9 WU: 48.6/m I:16 GPU 4: 48.0C 2335RPM | 94.30K/94.65Kh/s | A: 800 R:96 HW: 6 WU: 56.3/m I:16 --------------------------------------------------------------------------------
conf: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_USE_SYNC_OBJECTS 1 ultracoinminer --scrypt-jane -o stratum+tcp://ultra.nitro.org:3337 -u *******.3 -p aercbz!@# --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 16 -s 1 -g 1 -w 256 -v 1 --thread-concurrency 16384 --gpu-engine 1100 --gpu-memclock 1400 --gpu-powertune 20 --gpu-fan 60%
what wrong? why many HW?
|
|
|
|
dooman13
Newbie
Offline
Activity: 56
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:45:24 PM |
|
some of the top hashers are at 28000kh..how? 10000 rigs?
|
|
|
|
Navyman47
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 96
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:45:31 PM |
|
Website Maintenance Dear Binarians Since our launch we have been encouraged through your support and cooperation in making the exchange a success. During this week you highlighted several bugs that have hindered your experience on the platform. Listening to our community and following your lead on how we should conduct our services is embedded in our culture. In line with this and the priority we give to ensuring your experience is seamless, fun and memorable. The dev team have been given a time frame of two weeks to address all issues and return the platform bug free. We also want to take this opportunity to assure you that all successful candidates will have their $50 pre loaded in their accounts on our return. Binary Fund Team Here we go again. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
Protagonus
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 28, 2014, 08:46:10 PM |
|
here's my sapphire rig 3x 7950's. Also have 3x powercolors they are 125Khs ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.imgur.com%2FTQTQbut.jpg&t=665&c=hUvuFoKFY82oxQ) good thing I check too; hadn't noticed room temp...whoops Protagonus Can you post your settings hd7950? --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 18 -w 512 -g 1 --gpu-engine 1080 --gpu-memclock 1600 --gpu-powertune 20 --thread-concurrency 35840 --queue 0 --scan-time 1 --expiry 8 --no-submit-stale
|
|
|
|
|