[ANN] [ASIC-RESISTANT] UltraCoin (UTC) - Ultrafast 6 second transactions!!

[regnevacs]

ok

[1714588435]

1714588435

[1714588435]

1714588435

[Mikebeav3r]

Nice retort Cointradero And rightly so.

[red5standingby]

My 280x settings. Getting 140khs x 4 cards.

setx GPU_FORCE_64BIT_PTR=1
setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
del *.bin
ultracoinminer -o stratum+tcp://ultra.leetpools.net:3333 -u [username] -p [password] --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -s 1 -E 10 -I 18 -g 1 --gpu-engine 1100 --gpu-memclock 1500 --thread-concurrency 24000 --auto-fan --gpu-powertune 20 --queue 0 --temp-target 70 --temp-overheat 80 --gpu-fan 75-95

[joawaywego]

ugh...had to set -I 12 to get rid of HW errors. I have 3x 7950s each at 66kh right now.

put:  -G 1 -I 18 -W 512 --thread-concurrency 35840   rest of your setting should be fine.
                                                           (1792 x 20)
See if that gets you to 120Kh/s range

thanks for the suggestions. my config file and miner thank you. i'm getting 114kh at -I 18

[noobyonekenobi]

Settings for 270x @ 83.5kh  ... no HW errors

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 17 --thread-concurrency 24000 --gpu-engine 1000 --gpu-memclock 1400 --gpu-powertune 20

mine crashed by this setting

[fredeq]

My 280x settings. Getting 140khs x 4 cards.

setx GPU_FORCE_64BIT_PTR=1
setx GPUMAXALLOCPERCENT 100
setx GPUUSESYNC_OBJECTS 1
del *.bin
ultracoinminer -o stratum+tcp://ultra.leetpools.net:3333 -u [username] -p [password] --scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -w 256 -s 1 -E 10 -I 18 -g 1 --gpu-engine 1100 --gpu-memclock 1500 --thread-concurrency 24000 --auto-fan --gpu-powertune 20 --queue 0 --temp-target 70 --temp-overheat 80 --gpu-fan 75-95

Getting same khash, sadly many hw errors.

[imginy]

okay I have my 7950's doing 125 Kh/s each no HW errors

I'm running -w 512  -I 18 -TC 35k-40k    1050/1500 and 1080/1600 clocks

Really just changed the TC and dropped intensity as I was running 19.   Tc in the 35k -40K range not changing WU yet.   Can't say whats optimal there atm

this helped me my on my 7950.

any advice for 280x?

I don't have any of the new cards.  However the 280's seem to end up similar to 7950's I believe.   Try running similar settings, just change TC to 40,960  (2048 x 20)

Thanks for your help it got my 280x and 7950 both over 100.

I have switched my 280x back to 2 threads though 70 hashes because it was making my pc unusable.

[Jarod1231]

Settings for 270x @ 83.5kh  ... no HW errors

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 17 --thread-concurrency 24000 --gpu-engine 1000 --gpu-memclock 1400 --gpu-powertune 20

mine crashed by this setting

88.8kh now, took out gpu-engine and mem-clock and got better hash

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 17 --thread-concurrency 26000 --gpu-powertune 20

[regnevacs]

ok ill share it to you guys..

eventhough i didnt get any thanks or love.  

TC 18432 I 12

same settings on before N factor.

gracias

[fredeq]

Well thats it, I am buying 2x 8gb ram tomorrow

[imginy]

Someone is dumping very hard on mint right now.

need some buy support really all my buys been eaten on poloniex and mint.

[joawaywego]

here's the working config file for my 3x 7950 machine.

"intensity" : "15,18,18",
"vectors" : "1,1,1",
"worksize" : "512,512,512",
"kernel" : "scrypt-jane,scrypt-jane,scrypt-jane",
"sj-nfmin" : "4",
"sj-nfmax" : "30",
"sj-time" : "1388361600",
"lookup-gap" : "0,0,0",
"thread-concurrency" : "35840,35840,35840",
"shaders" : "0,0,0",
"gpu-engine" : "850-1000,850-1000,850-1000",
"gpu-fan" : "25-80,25-80,25-80",
"gpu-memclock" : "1250,1250,1250",
"gpu-memdiff" : "0,0,0",
"gpu-powertune" : "20,20,20",
"gpu-vddc" : "1.031,1.031,1.031",
"temp-cutoff" : "90,90,90",
"temp-overheat" : "80,80,80",
"temp-target" : "70,70,70",
"api-mcast-port" : "4028",
"api-port" : "4028",
"api-listen" : true,
"api-allow" : "w:127.0.0.1",
"auto-fan" : true,
"expiry" : "10",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "1",
"log" : "5",
"no-pool-disable" : true,
"queue" : "0",
"scan-time" : "1",
"no-submit-stale" : true,
"scrypt" : true,
"scrypt-jane" : true,
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"

I'm pulling 334kh with a WU of 340. My system is stable and vddc for each card is holding at 1.031, core clock at 1000 and memory clock at 1250.

[AizenSou]

ok ill share it to you guys..

eventhough i didnt get any thanks or love.  

TC 18432 I 12

same settings on before N factor.

gracias

I only get 75khs with your setting. What are your others settings like gpu-engine, worksize, lookup-gap, gpu-threads e.g?

Thanks

[alekseev555]

280x: gpu 1000
gpu-memclock 1500
intensity 12
thread-concurrency 16384
~130 kh/s, no HW

[Darrell]

ok ill share it to you guys..

eventhough i didnt get any thanks or love.  

TC 18432 I 12

same settings on before N factor.

gracias

Thank you very much sent you 10 utc

280x pulling 130kh/s
7970 lagging behind at 115kh/s

much improved though

[fredeq]

280x: gpu 1000
gpu-memclock 1500
intensity 12
thread-concurrency 16384
~130 kh/s, no HW

Thats with gpu threads 2 or 1?

[Puycheval]

Total net hash rate went from ~1400 MH/s down to ~200 MH/s...
Seems like many rigs didn't handle the N change very well.

[regnevacs]

ok ill share it to you guys..

eventhough i didnt get any thanks or love.  

TC 18432 I 12

same settings on before N factor.

gracias

Thank you very much sent you 10 utc

280x pulling 130kh/s
7970 lagging behind at 115kh/s

much improved though

TY  ..i think this can pull @ 150 most, ill try to tweak it more.

[noobyonekenobi]

Settings for 270x @ 83.5kh  ... no HW errors

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 17 --thread-concurrency 24000 --gpu-engine 1000 --gpu-memclock 1400 --gpu-powertune 20

mine crashed by this setting

88.8kh now, took out gpu-engine and mem-clock and got better hash

--scrypt-jane --sj-nfmin 4 --sj-nfmax 30 --sj-time 1388361600 -I 17 --thread-concurrency 26000 --gpu-powertune 20

Got mine to 88.7 but my display driver always crashed and my monitor went black i can only see my mouse pointer. Im just monitoring it via mobile remote

[alekseev555]

280x: gpu 1000
gpu-memclock 1500
intensity 12
thread-concurrency 16384
~130 kh/s, no HW

Thats with gpu threads 2 or 1?

gpu-threads 2