trexminer (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 283
Merit: 63
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2021, 07:56:12 AM |
|
Hi Worked like a charm so far ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) - Somehow every instance of Trex is suddenly using 11-12% CPU of Ryzen 5. I had to do a Bios reset. Before it was like below 1% CPU usage per instance. I also changed some system settings because recently I added from stock a GTX 970 would not work in Trex for Ergo, ETC. "Can't find nonce with device. Cuda exception. Cuda error not supported." It works fine in miniZ miner. Any Idea about sudden high CPU Usage? Maxwell still supported? I read it should be. Best regards https://github.com/trexminer/T-Rex/wiki/FAQ#high-cpu-usageMaxwell is still supported.
|
|
|
|
trexminer (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 283
Merit: 63
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2021, 08:03:20 AM |
|
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default. The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters (in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set) * ("ethash", "autolykos2") New "--lhr-autotune-step-size" and "--lhr-autotune-interval" parameters for finer control of LHR unlock behaviour * ("ethash", "firopow") Add ETH+FIRO dual mining (use the same OC settings as ETH+RVN) * ("autolykos2") New "--dataset-mode" parameter to enable/disable double buffer mode: 1 - single buffer mode, 2 - double buffer mode (default) * Add SOCKS5 proxy support (see "--proxy" parameter) * New "--temperature-color-mem" parameter to control memory temperature highlighting in console and WebUI * (WebUI) Multiple improvements: - 24H view on the graph - Ability to hide individual charts (power, avg hashrate etc.) on the graph - Recompute average hashrate/power when zooming in the graph - Ability to reorder/hide GPU table columns - Auto-propagation of the miner node list to all nodes
Bug fixes: * ("ethash") RTX 3060 GA104 is not recognised as an LHR card * Veriblock mining is broken since 0.24.2 * (Linux) Log file contains ANSI escape sequences * (WebUI) Log file retrieved through WebUI has trailing zeros
|
|
|
|
nik-qz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2021, 01:46:27 PM |
|
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default. The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters (in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
not bad, on the video card Palit 3080 TI hashrate is about 82-83 with lhr 73 would anyone give the result hashrate given by a regular 3080 video card with lhr?
|
|
|
|
flip4flop
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 11, 2021, 03:22:11 PM |
|
I keep getting an error with ethash algo.
|
|
|
|
overclockerblg
Newbie
Offline
Activity: 26
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 12, 2021, 06:52:40 AM |
|
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default. The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters (in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set) * ("ethash", "autolykos2") New "--lhr-autotune-step-size" and "--lhr-autotune-interval" parameters for finer control of LHR unlock behaviour * ("ethash", "firopow") Add ETH+FIRO dual mining (use the same OC settings as ETH+RVN) * ("autolykos2") New "--dataset-mode" parameter to enable/disable double buffer mode: 1 - single buffer mode, 2 - double buffer mode (default) * Add SOCKS5 proxy support (see "--proxy" parameter) * New "--temperature-color-mem" parameter to control memory temperature highlighting in console and WebUI * (WebUI) Multiple improvements: - 24H view on the graph - Ability to hide individual charts (power, avg hashrate etc.) on the graph - Recompute average hashrate/power when zooming in the graph - Ability to reorder/hide GPU table columns - Auto-propagation of the miner node list to all nodes
Bug fixes: * ("ethash") RTX 3060 GA104 is not recognised as an LHR card * Veriblock mining is broken since 0.24.2 * (Linux) Log file contains ANSI escape sequences * (WebUI) Log file retrieved through WebUI has trailing zeros
How to dualmine ETH+ FIRO? I tried using the bat file inside the miner, but FIRO mining was 0 mh/s and ETH speed was like is was always. I have no LHR cards?
|
|
|
|
trexminer (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 283
Merit: 63
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 12, 2021, 01:38:42 PM |
|
How to dualmine ETH+ FIRO? I tried using the bat file inside the miner, but FIRO mining was 0 mh/s and ETH speed was like is was always. I have no LHR cards?
If you want to dual mine with a non-LHR card you need to manually specify "--lhr-tune 30" (or whatever ETH percentage you like) in your bat file.
|
|
|
|
Dr_Victor
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 12, 2021, 07:01:26 PM |
|
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default. The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters (in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
not bad, on the video card Palit 3080 TI hashrate is about 82-83 with lhr 73 would anyone give the result hashrate given by a regular 3080 video card with lhr? GTX 3080 Ti can give 92+. Try GPU lock (1560) and mem around 10800-11000.
|
yobit.net is banned from signatures
|
|
|
hiroshidw
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 490
Merit: 38
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 12, 2021, 08:31:46 PM |
|
Any chance to add zelcah (flux) ? I love T-Rex but, want to start mining flux, and at this time only Gminer or zmini can mine flux.
|
|
|
|
PeaMine
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 12, 2021, 11:14:20 PM |
|
How to dualmine ETH+ FIRO? I tried using the bat file inside the miner, but FIRO mining was 0 mh/s and ETH speed was like is was always. I have no LHR cards?
If you want to dual mine with a non-LHR card you need to manually specify "--lhr-tune 30" (or whatever ETH percentage you like) in your bat file. For those without a LHR card would there be any benefit to this beyond spreading out risk between coins? Also +1 on Flux ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
Datacenter Technician and Electrician. If you have any questions feel free to ask me as I am generally bored looking at logs and happy to help during free time.
|
|
|
trexminer (OP)
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 283
Merit: 63
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 13, 2021, 08:24:57 AM |
|
T-Rex 0.24.7
Bug fixes: * Some command line arguments don't take precedence over the values set in a config file (e.g. "--lhr-autotune-step-size") * (WebUI) Performance degradation introduced in 0.24.6 * (WebUI) Monitoring page shows a blank page if you had 15M or 2H graph views selected on while using an older version of T-Rex * (WebUI) Impossible to set LHR tune values with decimal point
HiveOS users: many of you complained that your hashrate on LHR cards is fluctuating too much compared to the Windows version. The reason is HiveOS sets "hashrate-avr": 30 for T-Rex causing it to report 30-seconds average hashrate as opposed to 1-minute average (default). A temporary solution would be to edit your flight sheet and manually add "hashrate-avr": 60 to the "Extra config arguments" field. Otherwise, we've been told there will be a HiveOS release that fixes it permanently.
|
|
|
|
overclockerblg
Newbie
Offline
Activity: 26
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 13, 2021, 08:53:25 AM |
|
How to dualmine ETH+ FIRO? I tried using the bat file inside the miner, but FIRO mining was 0 mh/s and ETH speed was like is was always. I have no LHR cards?
If you want to dual mine with a non-LHR card you need to manually specify "--lhr-tune 30" (or whatever ETH percentage you like) in your bat file. It gives an error: parse error: Argument: -algo
|
|
|
|
|
nik-qz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 13, 2021, 03:55:00 PM |
|
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default. The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters (in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
not bad, on the video card Palit 3080 TI hashrate is about 82-83 with lhr 73 would anyone give the result hashrate given by a regular 3080 video card with lhr? GTX 3080 Ti can give 92+. Try GPU lock (1560) and mem around 10800-11000. I don’t know where you saw such results, the 3080 ti video card cannot take the core frequency of the locked state in any way, the lhr mechanism will block the video card if it takes more frequency than the set limit value for bypassing lhr and therefore it is impossible to fix the core at a certain high value, which is what I have happens, in fact, therefore, the speed is 82-83mh otherwise it could be higher
|
|
|
|
rafamonteiroo
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 13, 2021, 10:33:07 PM |
|
solved, formatted and re-installed windows 10, and installed the 472.12 nv driver cleanly https://i.imgur.com/6QHCfQo.pngEVGA GTX 1070 core +150 MHz memory +450MHz 28 MH/s130 W Palit RTX 3070 Ti Gaming Pro core fixed 1050 MHz memory +1100 MHz 59 MH/s170W Colorful RTX 3080 Ti Vulkan OC V core fixed 1185 MHz memory +1100 MHz 89 MH/s255 W
|
|
|
|
bigear
Newbie
Offline
Activity: 5
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 14, 2021, 10:10:03 AM |
|
Hi! With versions 0.24.5-0.24.7 I have a problem with dual mining ETH+ERG on 3060ti. I've tried to set --dataset-mode=1, run without any overclock but without success. On version 0.24.2 everything works fine. 20211114 09:34:15 conn1: Using protocol: stratum1. 20211114 09:34:15 conn1: Authorizing... 20211114 09:34:15 conn1: Authorized successfully. 20211114 09:34:15 conn1: ethash epoch: 453, diff: 4.29 G 20211114 09:34:15 conn2: Extranonce is set to: 6722 20211114 09:34:15 conn2: Authorizing... 20211114 09:34:15 GPU #0: intensity 21.3 20211114 09:34:15 conn2: Authorized successfully. 20211114 09:34:15 conn2: autolykos2 block: 619700, diff: 4.00 G 20211114 09:34:20 GPU #0: generating DAG 4.54 GB for epoch 453 ... 20211114 09:34:34 GPU #0: DAG generated [crc: 74767b93, time: 14358 ms], memory left: 2.02 GB 20211114 09:34:34 TREX: Can't find nonce with device [ID=0, GPU #0], cuda exception: CUDA_ERROR_ILLEGAL_ADDRESS, try to reduce overclock to stabilize GPU state 20211114 09:34:34 WARN: Miner is going to shutdown... 20211114 09:34:34 Main loop finished. Cleaning up resources... 20211114 09:34:34 ApiServer: stopped listening on 0.0.0.0:5555 20211114 09:34:35 T-Rex finished.
|
|
|
|
nik-qz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 14, 2021, 03:18:42 PM |
|
Friends, I have the following problem, it doesn't show clocks and power consumption, any tips?
windows 10 + 472.12 nvidia driver
solved, formatted and re-installed windows 10, and installed the 472.12 nv driver cleanly Colorful RTX 3080 Ti Vulkan OC V core fixed 1185 MHz memory +1100 MHz 89 MH/s255 W Apparently the LHR mechanism is individual and depends on the consumption of the video card, on my video card on the same drivers I can achieve somewhere 85-86 megahashes, while increasing the memory frequency over 850 MHz is not effective, the speed does not increase, and the LHR limit is reduced, as well as any locks with the parameters lock-cclock, lock-cv only reduce the speed, the optimal value is 0 I think this is due to the fact that with an increase in the clock frequency of the memory, the total consumption of the card increases and ultimately it exceeds a certain limit set for the LHR to operate ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.ibb.co%2FzGYrHF1%2F11.png&t=665&c=svnywaZBeS7bTg)
|
|
|
|
tutorialevideo
Legendary
Offline
Activity: 1161
Merit: 1001
Don`t invest more than you can afford to lose
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 14, 2021, 07:32:09 PM |
|
On 3080 normal AORUS
0: Gigabyte NVIDIA RTX 3080 10GB94.02.71.80.06 1455/10151 70.91 HASH
SImplemining
|
|
|
|
Dr_Victor
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 15, 2021, 07:15:23 PM |
|
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default. The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters (in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
not bad, on the video card Palit 3080 TI hashrate is about 82-83 with lhr 73 would anyone give the result hashrate given by a regular 3080 video card with lhr? GTX 3080 Ti can give 92+. Try GPU lock (1560) and mem around 10800-11000. I don’t know where you saw such results, the 3080 ti video card cannot take the core frequency of the locked state in any way, the lhr mechanism will block the video card if it takes more frequency than the set limit value for bypassing lhr and therefore it is impossible to fix the core at a certain high value, which is what I have happens, in fact, therefore, the speed is 82-83mh otherwise it could be higher It is so funny to hear from you fairy tales. https://imgur.com/AcLZqqt
|
yobit.net is banned from signatures
|
|
|
nik-qz
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 15, 2021, 09:56:14 PM |
|
T-Rex 0.24.6
* ("ethash") Improve LHR unlocker, LHR tune value increased from 71 to 74 by default. The new LHR tune scale is somewhat different, so it's recommended to let autotune find the optimal parameters (in other words, for the first run, remove "--lhr-autotune-mode" and "--lhr-tune" parameters from your bat file if they are set)
not bad, on the video card Palit 3080 TI hashrate is about 82-83 with lhr 73 would anyone give the result hashrate given by a regular 3080 video card with lhr? GTX 3080 Ti can give 92+. Try GPU lock (1560) and mem around 10800-11000. I don’t know where you saw such results, the 3080 ti video card cannot take the core frequency of the locked state in any way, the lhr mechanism will block the video card if it takes more frequency than the set limit value for bypassing lhr and therefore it is impossible to fix the core at a certain high value, which is what I have happens, in fact, therefore, the speed is 82-83mh otherwise it could be higher It is so funny to hear from you fairy tales. https://imgur.com/AcLZqqtshow your core frequency, the real one, which is displayed in hwinfo, for example, since on my 3080 TI cards it cannot be blocked and it constantly jumps up and down I do not deny that such a result is possible, but my video card gives out otherwise
|
|
|
|
haliy-2017
Newbie
Offline
Activity: 74
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 16, 2021, 02:47:25 PM |
|
Hi Worked like a charm so far ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) - Somehow every instance of Trex is suddenly using 11-12% CPU of Ryzen 5. I had to do a Bios reset. Before it was like below 1% CPU usage per instance. I also changed some system settings because recently I added from stock a GTX 970 would not work in Trex for Ergo, ETC. "Can't find nonce with device. Cuda exception. Cuda error not supported." It works fine in miniZ miner. Any Idea about sudden high CPU Usage? Maxwell still supported? I read it should be. Best regards If you experience high CPU usage by T-Rex miner process on Windows and your NVIDIA drivers are 471.11 or newer, the most likely cause is the "Hardware-accelerated GPU Scheduling" feature. To disable it, go to Start -> Settings -> Display -> Graphics settings, and turn it off.
|
|
|
|
|