maxfunky
|
|
July 15, 2021, 01:45:30 AM |
|
Hi I mine using lolminer (SMOS) zombie mode on a rig with rx 580 4gb and a Vega 64 but the vega never start mining do you know if it is possible to do it on the same rig ?
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 15, 2021, 06:35:50 AM |
|
It happens on all miners with the 5700 and old HiveOS version... Install HiveOS with Kernel 5.4.0-hiveos #108, as I see you have a very old Driver AMD 20.20 the most stable is 20.40 that hasn't go a memory bug lead with the 5700xt. If you take the last image realase of update inside HiveOS you will avoid that Free Ram that you have :-)
It was solved on this realease:
0.6-190linux 2021-01-08 LINUX SYSTEM IMAGE New Stable branch Hive Linux client: v0.6-190@201106 Universal boot mode: BIOS | UEFI Linux kernel: v5.4.80-hiveos Drivers version: AMD v20.40, Nvidia: v455.45.01 Universal image with "support from the box" AMD Polaris/Vega/Navi and Nvidia 10xx/16xx/20xx/30xx
Its not possible, i was using TRM for at least 3-4 months and after that 1 month PM without any memory problems. It started when i changed to lolMiner. And if i change back to TRM, there is no problem with memory. It shows 6.6gb free ram all the time. (And if you havent noticed its RAM not VRAM) (5.8gb now :-) ) But i can try to update that driver when i visit the mining site. Last time i tried 20.4, it didnt work, cant remember which card didn't show up. and thanks for advice. Driver 20.20 has a memory leak... is not miner depence. Just update and you will have all solved... but update your complete image to 5.4.0-hiveos #108 the last avaliable in website. You will continue having all the same copying the rig.conf ☺
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 15, 2021, 06:37:26 AM |
|
Hi I mine using lolminer (SMOS) zombie mode on a rig with rx 580 4gb and a Vega 64 but the vega never start mining do you know if it is possible to do it on the same rig ?
Yes it is possible, which is your config line to check what's happening
|
|
|
|
DrX
Member
Offline
Activity: 233
Merit: 20
|
|
July 15, 2021, 06:36:18 PM |
|
It happens on all miners with the 5700 and old HiveOS version... Install HiveOS with Kernel 5.4.0-hiveos #108, as I see you have a very old Driver AMD 20.20 the most stable is 20.40 that hasn't go a memory bug lead with the 5700xt. If you take the last image realase of update inside HiveOS you will avoid that Free Ram that you have :-)
It was solved on this realease:
0.6-190linux 2021-01-08 LINUX SYSTEM IMAGE New Stable branch Hive Linux client: v0.6-190@201106 Universal boot mode: BIOS | UEFI Linux kernel: v5.4.80-hiveos Drivers version: AMD v20.40, Nvidia: v455.45.01 Universal image with "support from the box" AMD Polaris/Vega/Navi and Nvidia 10xx/16xx/20xx/30xx
Its not possible, i was using TRM for at least 3-4 months and after that 1 month PM without any memory problems. It started when i changed to lolMiner. And if i change back to TRM, there is no problem with memory. It shows 6.6gb free ram all the time. (And if you havent noticed its RAM not VRAM) (5.8gb now :-) ) But i can try to update that driver when i visit the mining site. Last time i tried 20.4, it didnt work, cant remember which card didn't show up. and thanks for advice. Driver 20.20 has a memory leak... is not miner depence. Just update and you will have all solved... but update your complete image to 5.4.0-hiveos #108 the last avaliable in website. You will continue having all the same copying the rig.conf ☺ Updated driver to 20.40 and it broke everything, no OC or fan control on RX5600 and RX5700 -> Big problems with over heating... Now back at 20.20, everything working again, added auto restart every week for miner so no more problem With 20.20 also hashrate higher and lower power consumption on RX570 and RX580.
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 15, 2021, 07:18:47 PM |
|
It happens on all miners with the 5700 and old HiveOS version... Install HiveOS with Kernel 5.4.0-hiveos #108, as I see you have a very old Driver AMD 20.20 the most stable is 20.40 that hasn't go a memory bug lead with the 5700xt. If you take the last image realase of update inside HiveOS you will avoid that Free Ram that you have :-)
It was solved on this realease:
0.6-190linux 2021-01-08 LINUX SYSTEM IMAGE New Stable branch Hive Linux client: v0.6-190@201106 Universal boot mode: BIOS | UEFI Linux kernel: v5.4.80-hiveos Drivers version: AMD v20.40, Nvidia: v455.45.01 Universal image with "support from the box" AMD Polaris/Vega/Navi and Nvidia 10xx/16xx/20xx/30xx
Its not possible, i was using TRM for at least 3-4 months and after that 1 month PM without any memory problems. It started when i changed to lolMiner. And if i change back to TRM, there is no problem with memory. It shows 6.6gb free ram all the time. (And if you havent noticed its RAM not VRAM) (5.8gb now :-) ) But i can try to update that driver when i visit the mining site. Last time i tried 20.4, it didnt work, cant remember which card didn't show up. and thanks for advice. Driver 20.20 has a memory leak... is not miner depence. Just update and you will have all solved... but update your complete image to 5.4.0-hiveos #108 the last avaliable in website. You will continue having all the same copying the rig.conf ☺ Updated driver to 20.40 and it broke everything, no OC or fan control on RX5600 and RX5700 -> Big problems with over heating... Now back at 20.20, everything working again, added auto restart every week for miner so no more problem With 20.20 also hashrate higher and lower power consumption on RX570 and RX580. I hope you update the image of HiveOS soon as I said you then all will go perfectly ... meanwhile you will continue having the autoreboot when free memory ends...
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 17, 2021, 07:09:28 AM |
|
Testing Silicion Lottery... 3080 : 96Mhs at 201W with Memory Temp 78C Same Model : Without pushing it 205W and 82C Memory Temp... (I haven't push it up yet)
|
|
|
|
dedizonesv2
Jr. Member
Offline
Activity: 152
Merit: 3
|
|
July 18, 2021, 06:08:36 PM |
|
Testing Silicion Lottery... 3080 : 96Mhs at 201W with Memory Temp 78C Same Model : Without pushing it 205W and 82C Memory Temp... (I haven't push it up yet) I tested the last version lolminer, and it's a shame because under ETC and ETH we consume more WATT than other software, I have uploaded this internally, I hope you will find how optimized
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 18, 2021, 09:32:06 PM |
|
Testing Silicion Lottery... 3080 : 96Mhs at 201W with Memory Temp 78C Same Model : Without pushing it 205W and 82C Memory Temp... (I haven't push it up yet) I tested the last version lolminer, and it's a shame because under ETC and ETH we consume more WATT than other software, I have uploaded this internally, I hope you will find how optimized How can consume more watts?? are you using Fixed Core or Power Limit? It hasn't been any update in ETHASH only for the 3060...
|
|
|
|
dedizonesv2
Jr. Member
Offline
Activity: 152
Merit: 3
|
|
July 19, 2021, 07:05:52 AM |
|
Testing Silicion Lottery... 3080 : 96Mhs at 201W with Memory Temp 78C Same Model : Without pushing it 205W and 82C Memory Temp... (I haven't push it up yet) I tested the last version lolminer, and it's a shame because under ETC and ETH we consume more WATT than other software, I have uploaded this internally, I hope you will find how optimized How can consume more watts?? are you using Fixed Core or Power Limit? It hasn't been any update in ETHASH only for the 3060... Yes i try 24H and lolminer more +-100w Exemple: lolminer 3827w, other miner 3780w Lolminer: 4014W Today add cards other miner: 3914W i verified on the wall + linky (an electricity company meter) it is not a big consumption either but just sometimes a little tour in the code to optimize it :* i use locked core in hiveos
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 20, 2021, 09:00:11 PM |
|
Testing Silicion Lottery... 3080 : 96Mhs at 201W with Memory Temp 78C Same Model : Without pushing it 205W and 82C Memory Temp... (I haven't push it up yet) I tested the last version lolminer, and it's a shame because under ETC and ETH we consume more WATT than other software, I have uploaded this internally, I hope you will find how optimized How can consume more watts?? are you using Fixed Core or Power Limit? It hasn't been any update in ETHASH only for the 3060... Yes i try 24H and lolminer more +-100w Exemple: lolminer 3827w, other miner 3780w Lolminer: 4014W Today add cards other miner: 3914W i verified on the wall + linky (an electricity company meter) it is not a big consumption either but just sometimes a little tour in the code to optimize it :* i use locked core in hiveos Really interesting... in my case comparative with CUDA 1.31 for example in 3070 and 3080 are 2-3W less with some others miners.... It is true, I use low Core with low Memory and I can reduce Watts and stress lot less the GPUs.. About the new card is nearly I lolMiner 190W and 134W in the other miner... I think that's to much difference?
|
|
|
|
dedizonesv2
Jr. Member
Offline
Activity: 152
Merit: 3
|
|
July 21, 2021, 09:34:20 PM |
|
Testing Silicion Lottery...
3080 : 96Mhs at 201W with Memory Temp 78C
Same Model : Without pushing it 205W and 82C Memory Temp... (I haven't push it up yet)
I tested the last version lolminer, and it's a shame because under ETC and ETH we consume more WATT than other software, I have uploaded this internally, I hope you will find how optimized How can consume more watts?? are you using Fixed Core or Power Limit? It hasn't been any update in ETHASH only for the 3060... Yes i try 24H and lolminer more +-100w Exemple: lolminer 3827w, other miner 3780w Lolminer: 4014W Today add cards other miner: 3914W i verified on the wall + linky (an electricity company meter) it is not a big consumption either but just sometimes a little tour in the code to optimize it :* i use locked core in hiveos Really interesting... in my case comparative with CUDA 1.31 for example in 3070 and 3080 are 2-3W less with some others miners.... It is true, I use low Core with low Memory and I can reduce Watts and stress lot less the GPUs.. About the new card is nearly I lolMiner 190W and 134W in the other miner... I think that's to much difference? I rollback driver nvidia last version to 460.39 and I will redo the test between lolminer and another that I use
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 22, 2021, 01:19:05 PM |
|
Testing Silicion Lottery...
3080 : 96Mhs at 201W with Memory Temp 78C
Same Model : Without pushing it 205W and 82C Memory Temp... (I haven't push it up yet)
I tested the last version lolminer, and it's a shame because under ETC and ETH we consume more WATT than other software, I have uploaded this internally, I hope you will find how optimized How can consume more watts?? are you using Fixed Core or Power Limit? It hasn't been any update in ETHASH only for the 3060... Yes i try 24H and lolminer more +-100w Exemple: lolminer 3827w, other miner 3780w Lolminer: 4014W Today add cards other miner: 3914W i verified on the wall + linky (an electricity company meter) it is not a big consumption either but just sometimes a little tour in the code to optimize it :* i use locked core in hiveos Really interesting... in my case comparative with CUDA 1.31 for example in 3070 and 3080 are 2-3W less with some others miners.... It is true, I use low Core with low Memory and I can reduce Watts and stress lot less the GPUs.. About the new card is nearly I lolMiner 190W and 134W in the other miner... I think that's to much difference? I rollback driver nvidia last version to 460.39 and I will redo the test between lolminer and another that I use Are you testing with 3060 rigs? Only for the driver choose Curiosity
|
|
|
|
dedizonesv2
Jr. Member
Offline
Activity: 152
Merit: 3
|
|
July 22, 2021, 03:03:30 PM |
|
Are you testing with 3060 rigs? Only for the driver choose Smiley Curiosity No, i have only 3060Ti, 3070 and 3080 ^_^ sorry
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 26, 2021, 12:20:35 PM |
|
Are you testing with 3060 rigs? Only for the driver choose Smiley Curiosity No, i have only 3060Ti, 3070 and 3080 ^_^ sorry Really nice rigs... I found that lastest drivers are better in case a Riser fail... What I found is that, lastest drivers can ommit better waiting for the riser information. at least in old rigs where the risers are not in best situation...
|
|
|
|
dedizonesv2
Jr. Member
Offline
Activity: 152
Merit: 3
|
|
July 26, 2021, 04:12:45 PM |
|
Are you testing with 3060 rigs? Only for the driver choose Smiley Curiosity No, i have only 3060Ti, 3070 and 3080 ^_^ sorry Really nice rigs... I found that lastest drivers are better in case a Riser fail... What I found is that, lastest drivers can ommit better waiting for the riser information. at least in old rigs where the risers are not in best situation... well I have last generation risers with 8 capacitor + the small coil above 150 (often 100). I find that I have better performance with the nvidia 460.39 drivers I redid the tests, I really have a bad hashrate / share / watt with lolminer, I consume more for less sharing
|
|
|
|
mrbugera2
Jr. Member
Offline
Activity: 85
Merit: 2
|
|
July 27, 2021, 02:39:36 PM |
|
|
|
|
|
miner29
|
|
July 27, 2021, 04:50:44 PM |
|
guys third gpu shows 0, any ideas? thanks
That is GPU 0 that is showing 0.00 hash. Probably need to watch miner output when it starts to see error message why its not hashing. Is gpu0 a 4gb rx580? Also is your driver anywhere near current? Windows uses some of the memory of the first video card for some reason (linux does not suffer this). Post up what the miner is showing when spinning up and any error message it is showing about gpu0. Also your command line.
|
|
|
|
mrbugera2
Jr. Member
Offline
Activity: 85
Merit: 2
|
|
July 28, 2021, 02:13:55 PM |
|
guys third gpu shows 0, any ideas? thanks
That is GPU 0 that is showing 0.00 hash. Probably need to watch miner output when it starts to see error message why its not hashing. Is gpu0 a 4gb rx580? Also is your driver anywhere near current? Windows uses some of the memory of the first video card for some reason (linux does not suffer this). Post up what the miner is showing when spinning up and any error message it is showing about gpu0. Also your command line. 1) no its 8gb 2) driver is crimson beta old version (but it worked 1 week ago with no problems) 3) miner stil works with no error message 4) command line? can you explain what this means and how to post it p.s i have updated to new driver but still the same.. and then downgraded again thanks for your reply
|
|
|
|
miner29
|
|
July 28, 2021, 06:15:44 PM |
|
guys third gpu shows 0, any ideas? thanks
That is GPU 0 that is showing 0.00 hash. Probably need to watch miner output when it starts to see error message why its not hashing. Is gpu0 a 4gb rx580? Also is your driver anywhere near current? Windows uses some of the memory of the first video card for some reason (linux does not suffer this). Post up what the miner is showing when spinning up and any error message it is showing about gpu0. Also your command line. 1) no its 8gb 2) driver is crimson beta old version (but it worked 1 week ago with no problems) 3) miner stil works with no error message 4) command line? can you explain what this means and how to post it p.s i have updated to new driver but still the same.. and then downgraded again thanks for your reply Command line means the actual text that is executing the miner. Have you tried swapping gpu2 with gpu0? If the problem moves with the gpu then its something with gpu. If the problem remains on the gpu0 slot then its not the gpu. Take one step at a time trying to eliminate items. The other advise i would recommend is to try a linux mining os that can handle both types of cards and runs off a memory stick (so you can easily switch back to windows by removing memstick). I know mmpos can do this and beleive hiveOS can also if not there are several. But get one and try after trying above. Something is messed up just gotta isolate down to the culprit.
|
|
|
|
jgonzi
Member
Offline
Activity: 639
Merit: 19
|
|
July 29, 2021, 02:04:19 PM |
|
guys third gpu shows 0, any ideas? thanks
That is GPU 0 that is showing 0.00 hash. Probably need to watch miner output when it starts to see error message why its not hashing. Is gpu0 a 4gb rx580? Also is your driver anywhere near current? Windows uses some of the memory of the first video card for some reason (linux does not suffer this). Post up what the miner is showing when spinning up and any error message it is showing about gpu0. Also your command line. 1) no its 8gb 2) driver is crimson beta old version (but it worked 1 week ago with no problems) 3) miner stil works with no error message 4) command line? can you explain what this means and how to post it p.s i have updated to new driver but still the same.. and then downgraded again thanks for your reply Command line means the actual text that is executing the miner. Have you tried swapping gpu2 with gpu0? If the problem moves with the gpu then its something with gpu. If the problem remains on the gpu0 slot then its not the gpu. Take one step at a time trying to eliminate items. The other advise i would recommend is to try a linux mining os that can handle both types of cards and runs off a memory stick (so you can easily switch back to windows by removing memstick). I know mmpos can do this and beleive hiveOS can also if not there are several. But get one and try after trying above. Something is messed up just gotta isolate down to the culprit. Completely agree... Linux mining will help you in this configs too
|
|
|
|
|