SRBMiner-MULTI AMD & NVIDIA & INTEL & CPU miner

[doktor83]

Buuuut..... EPIC+ETC=2.9GB+1.28GB=~4.2GB???

Also ZIL+RAVEN > 4GB...

--gpu-buffer-mode 1

[1714194425]

1714194425

[doktor83]

V0.8.2
+ Added possibility to preload dataset/s on 'autolykos2' algorithm with '--gpu-autolykos2-preload' parameter (even on 4Gb cards!)
+ Little faster dataset creation on some GPU's
+ Job notifications are now displayed in console less frequently, unless extended log is enabled
+ Reverted 'autolykos2' kernels for hawaii, tonga and fiji to the ones from ver. 0.7.3
+ Bug fixes in algorithm switching mode ('--multi-algorithm-job-mode 3')

Dataset preloading can increase pool-side hashrate! (that means more profit)
Works even on GPU's with 4Gb!

For example if you set to preload 1 dataset that means it will create the dataset for the current and next block.
When the next block arrives, dataset will get loaded, which means GPU can continue working immediately (without creating the dataset).
Additional GPU memory needed.

There are 2 types of preloading :

If you set preload value to 1 it will constantly keep preloading the next block (preferred for 4-8GB gpu's)
If you set preload value to > 1 it will preload X number of datasets, and when a block arrives that isn't yet loaded, it will be created so miner can start working on it, and then again X number of datasets will get preloaded.

Code:

SRBMiner-MULTI.exe --disable-cpu --algorithm autolykos2 --gpu-autolykos2-preload 1 --pool de.ergo.herominers.com:1180 --wallet 9gj5rYtg1sGwdvoXGJswrSfPBXiXJgmyjZVEQ9p5fvZrCAfu6zT --gpu-boost 3

[SergeySS]

SRBMiner-MULTI.exe --disable-cpu --algorithm firopow --pool solo-firo.2miners.com:9090 --wallet aFwHAcSHFMhS6uTioV5S8LqFL8sxU9KqWw.1 --gpu-boost 3 --log-file 2.txt

Code:

Miner version: 0.8.2                                                                  
OS: windows                                                                           
Windows version: 10.0 build 14393                                                     
Video driver version: 22.19.659.0                                                     
Found 1 OpenCL platform/s                                                             
Platform 0: Advanced Micro Devices, Inc.                                              
Default OpenCL platform set to 0                                                      
Found 2 GPU device/s on platform 0                                                    
Please run miner as administrator/root to enable GPU tweaking                         
GPU0: radeon__tm__rx_480_graphics           [ellesmere    ][ 8192 MB][CU: 36][BUS: 01]
GPU1: radeon__tm__rx_480_graphics           [ellesmere    ][ 8192 MB][CU: 36][BUS: 03]
ADL: enabled                                                                          
Algorithm/s: firopow [0.85% fee]                                                      
Gpu mining: enabled                                                                   
Cpu mining: disabled                                                                  
Watchdog: enabled                                                                     
Gpu tweaking: disabled                                                                
Starting init of worker threads                                                       
A0|GPU0 | [BUS:01] [I:         22]                                                    
A0|GPU1 | [BUS:03] [I:         22]                                                    
AMD ADL initialised successfully! [2 devices]                                         
Finished init of worker threads                                                       
HTTP API disabled                                                                     
Started threads controller                                                            
Connected to solo-firo.2miners.com:9090 [0]                                           
Epoch    : 323 [firopow]                                                              
Preparing DAG, please wait... [firopow]                                               
Couldn't set epoch 323 on GPU1 [0]                                                    
Couldn't set epoch 323 on GPU0 [0]                                                    
E[21]

                                                                               

Video cards 8G, Windows 10. Why am I getting this error?

[doktor83]

SRBMiner-MULTI.exe --disable-cpu --algorithm firopow --pool solo-firo.2miners.com:9090 --wallet aFwHAcSHFMhS6uTioV5S8LqFL8sxU9KqWw.1 --gpu-boost 3 --log-file 2.txt

Miner version: 0.8.2                                                                 
OS: windows                                                                           
Windows version: 10.0 build 14393                                                     
Video driver version: 22.19.659.0                                                     
Found 1 OpenCL platform/s                                                             
Platform 0: Advanced Micro Devices, Inc.                                             
Default OpenCL platform set to 0                                                     
Found 2 GPU device/s on platform 0                                                   
Please run miner as administrator/root to enable GPU tweaking                         
GPU0: radeon__tm__rx_480_graphics           [ellesmere    ][ 8192 MB][CU: 36][BUS: 01]
GPU1: radeon__tm__rx_480_graphics           [ellesmere    ][ 8192 MB][CU: 36][BUS: 03]
ADL: enabled                                                                         
Algorithm/s: firopow [0.85% fee]                                                     
Gpu mining: enabled                                                                   
Cpu mining: disabled                                                                 
Watchdog: enabled                                                                     
Gpu tweaking: disabled                                                               
Starting init of worker threads                                                       
A0|GPU0 | [BUS:01] [I:         22]                                                   
A0|GPU1 | [BUS:03] [I:         22]                                                   
AMD ADL initialised successfully! [2 devices]                                         
Finished init of worker threads                                                       
HTTP API disabled                                                                     
Started threads controller                                                           
Connected to solo-firo.2miners.com:9090

•                                            

Epoch    : 323 [firopow]                                                             
Preparing DAG, please wait... [firopow]                                               
Couldn't set epoch 323 on GPU1

•                                                    

Couldn't set epoch 323 on GPU0

•                                                    

E[21]                                                                                 

Video cards 8G, Windows 10. Why am I getting this error?

Cause you are using the old blockchain driver which can't allocate big buffers, and the DAG for Firo is 4+GB.
You need to use newer drivers, 19.x or newer

[SergeySS]

I will not change the driver. Ether works fine and there is enough buffer.

[Branko]

I will not change the driver. Ether works fine and there is enough buffer.

First you say its not fine, then you say its fine. Whats your problem, then?

[sxemini]

I will not change the driver. Ether works fine and there is enough buffer.

First you say its not fine, then you say its fine. Whats your problem, then?

He will mine firo, and firo not working, but eth work with the old driver. He will not change the driver because he think the cards use more wattage with newer driver XD

I will not change the driver. Ether works fine and there is enough buffer.

Ok you are using and 4 years old beta driver? You found your failure? You will not change anything, then don´t cry like a baby  

[deedeeranged]

I will not change the driver. Ether works fine and there is enough buffer.

First you say its not fine, then you say its fine. Whats your problem, then?

He will mine firo, and firo not working, but eth work with the old driver. He will not change the driver because he think the cards use more wattage with newer driver XD

I will not change the driver. Ether works fine and there is enough buffer.

Ok you are using and 4 years old beta driver? You found your failure? You will not change anything, then don´t cry like a baby  

Sergey55 also asked this in the TRM thread where he has the same issue. I think I also said he needs to update drivers.

[doktor83]

No driver update, no firo mining, no problem.

[klondike_bar]

is verthash supported for R9 270X cards (2GB hawaii)? Obviously very old GPUs but great space heaters

[doktor83]

V0.8.3
+ Performance increase on 'heavyhash' algorithm for GPU's (up to ~20% on some cards)
+ Fixed issue with recognising some GPU's on newer drivers (broken since v0.8.1)
+ Reworked hashrate reporting/stats - now reporting average for 1 min / 1 hr / 6 hr / 12 hr (in API too)

Upgrade to this version if you are mining OpticalBitcoin, it will give you a nice hashrate boost!

[doktor83]

V0.8.3
+ Performance increase on 'heavyhash' algorithm for GPU's (up to ~20% on some cards)
+ Fixed issue with recognising some GPU's on newer drivers (broken since v0.8.1)
+ Reworked hashrate reporting/stats - now reporting average for 1 min / 1 hr / 6 hr / 12 hr (in API too)

Upgrade to this version if you are mining OpticalBitcoin, it will give you a nice hashrate boost!

work well... stable mining
ı have a little bug
in miner screen Autotune period report 0,00 hs "gray lines"

basically it works but can't write to the screen

Might do something with the changes i made on how hashrate is calculated/stored. Going to check it out.

[noko59]

How do you turn off Awesome Miner from opening up what it perceives as a failed miner? Mining ERGO with SRBMiner-Multi-0-8-2. It will over time just keep opening up additional miners all trying to mine ERGO without closing one that is actually mining anyways. Frustrating. Did not have this problem before until recently.

[kissmarx]

I'm currently mining ERGO and I wonder what could have caused this error: GPU3 result validation failed [autolykos2]?

Code:

[2021-11-19 08:53:56] GPU0[t1] result accepted [  129ms] [autolykos2][1]
[2021-11-19 08:54:07] GPU2[t1] result accepted [  115ms] [autolykos2][1]
[2021-11-19 08:54:16] GPU3 result validation failed [autolykos2]
[2021-11-19 08:54:30] GPU2[t0] result accepted [  170ms] [autolykos2][1]
[2021-11-19 08:54:36] GPU5[t0] result accepted [  101ms] [autolykos2][1]

[deedeeranged]

I'm currently mining ERGO and I wonder what could have caused this error: GPU3 result validation failed [autolykos2]?

Code:

[2021-11-19 08:53:56] GPU0[t1] result accepted [  129ms] [autolykos2][1]
[2021-11-19 08:54:07] GPU2[t1] result accepted [  115ms] [autolykos2][1]
[2021-11-19 08:54:16] GPU3 result validation failed [autolykos2]
[2021-11-19 08:54:30] GPU2[t0] result accepted [  170ms] [autolykos2][1]
[2021-11-19 08:54:36] GPU5[t0] result accepted [  101ms] [autolykos2][1]

Pls state OS and videocards used otherwise it a guessing game.

[doktor83]

I'm currently mining ERGO and I wonder what could have caused this error: GPU3 result validation failed [autolykos2]?

Code:

[2021-11-19 08:53:56] GPU0[t1] result accepted [  129ms] [autolykos2][1]
[2021-11-19 08:54:07] GPU2[t1] result accepted [  115ms] [autolykos2][1]
[2021-11-19 08:54:16] GPU3 result validation failed [autolykos2]
[2021-11-19 08:54:30] GPU2[t0] result accepted [  170ms] [autolykos2][1]
[2021-11-19 08:54:36] GPU5[t0] result accepted [  101ms] [autolykos2][1]

It means your GPU got a result that did not pass validation on the CPU. Usually this is related to OC.

[Eddo25]

Hi Doktor83, thanks for the great miner. I have a few things to say about srbminer:

1. Works with R9 280(x) gpu's.
2. Slower than teamredminer and spminer.
3. Intensity isn't working right in 0.8.3. It shows 0kh hashrate during tuning and doesn't work.

This is all for vertcoin mining. Thanks

[UniJo]

Is it possible to dual mine oBTC + eth? Because heavyhash is more core focused and Eth memory focused.

[Branko]

Devfee pool not reachable

[doktor83]

V0.8.4
+ Performance increase on 'heavyhash' algorithm for GPU's
+ Fixed display of hashrate while doing gpu auto tune process
+ Changed GPU temperature to show 'edge' value instead of 'hotspot'