DevonMiner
|
|
January 15, 2015, 09:24:36 PM |
|
Let us know what you want to see in Spondoolies-Tech's firmware… We are open to suggestions! What do you want to see implemented in our next firmware releases? We want to hear from you
Others have made some good suggestions, I have a simple request ... that a miner doesn't forget it's timezone. Too many of my miners from SP10/30/20 randomly revert back to the year 2000 after a restart. It's a hit and miss affair to get them to time warp to 2015. I've seen others make comments about this, no idea why it happens, but when it does it screws the graphs up. Thanks for asking.
|
|
|
|
Digitalmocking
|
|
January 15, 2015, 09:30:48 PM |
|
That's kind of interesting.
|
|
|
|
samsonn25
|
|
January 15, 2015, 10:14:59 PM |
|
That's kind of interesting. The upcoming Radeon r9 390x is a beast! Its a shame we cant gpu mine anymore
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
January 15, 2015, 10:15:19 PM |
|
Let us know what you want to see in Spondoolies-Tech's firmware… We are open to suggestions! What do you want to see implemented in our next firmware releases? We want to hear from you
Others have made some good suggestions, I have a simple request ... that a miner doesn't forget it's timezone. Too many of my miners from SP10/30/20 randomly revert back to the year 2000 after a restart. It's a hit and miss affair to get them to time warp to 2015. I've seen others make comments about this, no idea why it happens, but when it does it screws the graphs up. Thanks for asking. It happens if the miner can't reach the pool.ntp.org server to set its time. I'd like more manual control, I don't want my miner to talk to an outside NTP Server if I have my own on the network. I want to turn SSH off unless I need to use it etc. Back to time maybe even be able to manuallys set the time from the GUI
|
|
|
|
DevonMiner
|
|
January 15, 2015, 10:37:18 PM |
|
It happens if the miner can't reach the pool.ntp.org server to set its time.
Thanks Biffa didn't know that. ... manually set the time from the GUI
Sounds good if the pool.ntp.org server isn't playing ball.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
|
January 16, 2015, 05:51:57 AM |
|
I just wanted to thank you for paying attention to mining conditions and lowering price. Very nice to see a company following and listening to miners.
|
|
|
|
shacky
|
|
January 16, 2015, 06:46:31 AM |
|
Hi, Feature for firmware: Make easy to change hostname
|
|
|
|
aclass
|
|
January 16, 2015, 08:13:15 AM |
|
One more feature request: Settings profiles with scheduling Power is less expensive during the night here so I can get more GH at the same price. This will also help miners located in office areas where there is nobody at night.
|
|
|
|
mazedk
|
|
January 16, 2015, 08:17:29 AM |
|
One more feature request: Settings profiles with scheduling Power is less expensive during the night here so I can get more GH at the same price. This will also help miners located in office areas where there is nobody at night. +1 - some Places have almost free power at night. So running it overclocked during the night, and underclock/run normal during the day.
|
|
|
|
phillipsjk
Legendary
Offline
Activity: 1008
Merit: 1001
Let the chips fall where they may.
|
|
January 16, 2015, 08:26:33 AM |
|
+1 - some Places have almost free power at night. So running it overclocked during the night, and underclock/run normal during the day.
That usually happens with nuclear power plants providing base-load. In Ontario (Canada) the price even went negative for a time. (In Alberta the price is only allowed to go to 0 by fiat. (No nuclear power plants though).)
|
James' OpenPGP public key fingerprint: EB14 9E5B F80C 1F2D 3EBE 0A2F B3DE 81FF 7B9D 5160
|
|
|
ShopemNL
Legendary
Offline
Activity: 1025
Merit: 1001
|
|
January 16, 2015, 09:07:43 AM |
|
I have a customer with a bad SP31 prob psu + cables broken (melted) down.... Where can i get support for this...
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
January 16, 2015, 09:09:54 AM |
|
I have a customer with a bad SP31 prob psu + cables broken (melted) down.... Where can i get support for this...
Directly from Spondoolies, email support@spondoolies-tech.com
|
|
|
|
-ck
Legendary
Offline
Activity: 4256
Merit: 1644
Ruu \o/
|
|
January 16, 2015, 10:31:05 AM |
|
Let us know what you want to see in Spondoolies-Tech's firmware… We are open to suggestions! What do you want to see implemented in our next firmware releases? We want to hear from you, although we cannot make any promises to implement any suggestion, we will try out best to make it work. Post suggestions here in the thread…
I would like to see target temperature support whereby the firmware constantly adjusts fanspeed to the lowest possible RPM that will maintain the device just below a target temperature. Where cgminer drivers have had the ability to adjust fanspeed continuously, I have coded up this feature into them but the fanspeed control is not within cgminer on sp gear.
|
Developer/maintainer for cgminer, ckpool/ckproxy, and the -ck kernel 2% Fee Solo mining at solo.ckpool.org -ck
|
|
|
nhminer
|
|
January 16, 2015, 02:11:43 PM |
|
Let us know what you want to see in Spondoolies-Tech's firmware… We are open to suggestions! What do you want to see implemented in our next firmware releases? We want to hear from you, although we cannot make any promises to implement any suggestion, we will try out best to make it work. Post suggestions here in the thread…
I would like to see target temperature support whereby the firmware constantly adjusts fanspeed to the lowest possible RPM that will maintain the device just below a target temperature. Where cgminer drivers have had the ability to adjust fanspeed continuously, I have coded up this feature into them but the fanspeed control is not within cgminer on sp gear. Temperature range along with scheduling would be nice; Support other pool options in addition to Failover; Unreasonable wishlist -- Allow me to set my efficiency and have the SP20 auto adjust watts/volts/temp/fan/etc to obtain
|
BCH - 1EshwUEg9LRbY5WMSw7bkBGQUYQeenkcet
|
|
|
sjc1490
|
|
January 16, 2015, 03:47:57 PM |
|
Quick question for those that have had SPT Miners for a while. I have one SP20 that when you try to go to home page you get a 404 page not found. The url that displays is the Miner's IpAddress/cgi-bin/luci . The miner works fine otherwise and I can access the other pages setup etc just by putting the url for that page in directly. I have tried updating firmware and that didn't fix it. Has anyone had this before and is there an easy fix or am I looking at a recover or flash? Thanks
|
BTC ADDRESS: 12Qwd8VKLQ4xF44ytHXBpCAKuF9VknG4X2
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
|
January 16, 2015, 04:51:25 PM |
|
Quick question for those that have had SPT Miners for a while. I have one SP20 that when you try to go to home page you get a 404 page not found. The url that displays is the Miner's IpAddress/cgi-bin/luci . The miner works fine otherwise and I can access the other pages setup etc just by putting the url for that page in directly. I have tried updating firmware and that didn't fix it. Has anyone had this before and is there an easy fix or am I looking at a recover or flash? Thanks
Clear the browser cache
|
|
|
|
aclass
|
|
January 16, 2015, 05:06:05 PM |
|
luci is from your Ants. Clear cache or change the IP of the miner Quick question for those that have had SPT Miners for a while. I have one SP20 that when you try to go to home page you get a 404 page not found. The url that displays is the Miner's IpAddress/cgi-bin/luci . The miner works fine otherwise and I can access the other pages setup etc just by putting the url for that page in directly. I have tried updating firmware and that didn't fix it. Has anyone had this before and is there an easy fix or am I looking at a recover or flash? Thanks
|
|
|
|
Mart0n
Newbie
Offline
Activity: 5
Merit: 0
|
|
January 16, 2015, 05:08:26 PM |
|
Hi, Feature for firmware: Make easy to change hostname +1 Would you please share, "the difficult way" of changing the hostname of the SP3x. I followed the steps in the guide here, but it did not help: http://www.cyberciti.biz/faq/linux-change-hostname/I am still with the old hostname:( Is anyone else has found a way of changing it? Thank you.
|
|
|
|
Biodom
Legendary
Offline
Activity: 3906
Merit: 4372
|
|
January 16, 2015, 05:58:17 PM |
|
Did anybody tried to run SP30 more energy efficiently? If yes, care to share the settings and what the energy consumption/hashing speed will result? I have my units in hosting, so cannot play with settings as easily as with SP20 at home.
|
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
|
January 16, 2015, 06:12:52 PM |
|
Did anybody tried to run SP30 more energy efficiently? If yes, care to share the settings and what the energy consumption/hashing speed will result? I have my units in hosting, so cannot play with settings as easily as with SP20 at home.
I tried a quick test and I used start voltage .60 and set the max PSUs to 750W and it worked just fine. Can't remember stats because as I said it was just a quick test. Maybe I will have more spare time in week-end.
|
|
|
|
|