notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 05:58:49 PM |
|
Was not expecting it today. But nice surprise. Now need to test it and see how it does on speed ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) . If any of you find a great setting please share. Looks like your well on the way to finding one.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4214
Merit: 8357
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 06:01:00 PM |
|
I am getting really good numbers with lower : watts 180 fan 40 volts .062 max volts .068 .55 watt per gh damn good Temp Front / Back T,B 32 °C / 71,65 °C Fan Speed 40 Start Voltage 0.62 / 0.62 / 0.62 / 0.62 Max Voltage 0.67 Max Watts 180 / 180 / 180 / 180 744 watts for 1350 gh = 0.552 watts per gh I am using an evga 1300 g2 ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimagizer.imageshack.us%2Fv2%2F1280x1024q90%2F537%2FU40TpA.png&t=665&c=CLSyMDciFhG8LA)
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 06:05:44 PM Last edit: November 24, 2014, 06:16:40 PM by Spondoolies-Tech |
|
The SP20 can be under-clocked to ~0.5 J/GH, depending on cooling ambient temperature and specific ASIC batch.
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 06:06:32 PM |
|
Within 1-2 days we'll reach to "shipping from stock" status.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 06:07:55 PM |
|
The SP20 can be under-clocked to ~0.5 J/GH, depending on cooling and specific ASIC batch.
Very Impressive! Looks like I will be using this unit for quite a long time ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
Biodom
Legendary
Offline
Activity: 3850
Merit: 4227
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 06:13:45 PM |
|
The SP20 can be under-clocked to ~0.5 J/GH, depending on cooling and specific ASIC batch.
Cooling?
|
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 06:16:12 PM |
|
The SP20 can be under-clocked to ~0.5 J/GH, depending on cooling and specific ASIC batch.
Cooling? Ambient temperature.
|
|
|
|
Biodom
Legendary
Offline
Activity: 3850
Merit: 4227
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 06:19:33 PM |
|
The SP20 can be under-clocked to ~0.5 J/GH, depending on cooling and specific ASIC batch.
Cooling? Ambient temperature. any specifics? it has to be hot (>25C), cold (<18C) or in a specific range?
|
|
|
|
raskul
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 06:23:00 PM |
|
fabulous. i bought the evga 1600 80+ gold ( i like some head(room) ) ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) so i'll see what sort of numbers i can get with that, when it arrives**funny private joke. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
Guy Corem (OP)
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 06:24:22 PM |
|
The SP20 can be under-clocked to ~0.5 J/GH, depending on cooling and specific ASIC batch.
Cooling? Ambient temperature. any specifics? it has to be hot (>25C), cold (<18C) or in a specific range? Measurements were done with Emerson 1600. It offers (according to spec) minimal efficiency of 92% in our tested working points @25C ambient.
|
|
|
|
nhminer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 06:57:32 PM |
|
The SP20 can be under-clocked to ~0.5 J/GH, depending on cooling and specific ASIC batch.
Cooling? Ambient temperature. any specifics? it has to be hot (>25C), cold (<18C) or in a specific range? Measurements were done with Emerson 1600. It offers (according to spec) minimal efficiency of 92% in our tested working points @25C ambient. Is there anyway to cut the fan speed to less than 40? I plan on under clocking and am interested in reducing noise.
|
BCH - 1EshwUEg9LRbY5WMSw7bkBGQUYQeenkcet
|
|
|
zvisha
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 07:40:11 PM |
|
The SP20 can be under-clocked to ~0.5 J/GH, depending on cooling and specific ASIC batch.
Cooling? Ambient temperature. any specifics? it has to be hot (>25C), cold (<18C) or in a specific range? Measurements were done with Emerson 1600. It offers (according to spec) minimal efficiency of 92% in our tested working points @25C ambient. Is there anyway to cut the fan speed to less than 40? I plan on under clocking and am interested in reducing noise. edit /etc/mg_custom_rate via ssh
|
|
|
|
nhminer
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 07:48:22 PM |
|
Is there anyway to cut the fan speed to less than 40? I plan on under clocking and am interested in reducing noise.
edit /etc/mg_custom_rate via ssh looks like this is a new file miner-FL1444045011# ls mg* -1mg_custom_mode mg_custom_mode_sp20 mg_custom_mode_sp30 mg_disabled_asics mg_disabled_asics_sp20 mg_disabled_asics_sp30 mg_generic_psu mg_psu_limit mg_try_12v_fix mg_work_mode miner-FL1444045011# What is the format to include the 30% fan rate?
|
BCH - 1EshwUEg9LRbY5WMSw7bkBGQUYQeenkcet
|
|
|
philipma1957
Legendary
Offline
Activity: 4214
Merit: 8357
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 08:02:46 PM |
|
fabulous. i bought the evga 1600 80+ gold ( i like some head(room) ) ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) so i'll see what sort of numbers i can get with that, when it arrives**funny private joke. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) I think you could run 2 units on that psu
|
|
|
|
raskul
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 08:24:15 PM |
|
fabulous. i bought the evga 1600 80+ gold ( i like some head(room) ) ![Tongue](https://bitcointalk.org/Smileys/default/tongue.gif) so i'll see what sort of numbers i can get with that, when it arrives**funny private joke. ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) I think you could run 2 units on that psu well, it's like this.. once i'm done doing what i'm doing with it at home, it's going into a unit i have millions of miles from the earth where it will mine eternally on free electric.. so i'll be cranking it up to 11, and reckoned i'll need good headroom in the PSU... then again, you have me thinking, it may be worthwhile trying that PSU with 2 units... hmmm, indecision.
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 08:39:36 PM |
|
The SP20 can be under-clocked to ~0.5 J/GH, depending on cooling and specific ASIC batch.
Cooling? Ambient temperature. any specifics? it has to be hot (>25C), cold (<18C) or in a specific range? Measurements were done with Emerson 1600. It offers (according to spec) minimal efficiency of 92% in our tested working points @25C ambient. Is there anyway to cut the fan speed to less than 40? I plan on under clocking and am interested in reducing noise. It could be that these fans don't even start to spin up till they get a certain amount of voltage equivalent to 40 on the UI.
|
|
|
|
stan258
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 11:04:18 PM |
|
I don't run the coolest cold aisles in the world and I'm suprised at this last order of SP 20's hitting 1650 gh stable. Very content customer on this last round. The first batch I cannot get past 1545 GH. Watts fan everything at max. I even swapped placment with the new one to see if I have a bigger airflow problem then I already know is brewing up. But same results, just better Asics I suppose.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4214
Merit: 8357
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 11:22:31 PM |
|
I don't run the coolest cold aisles in the world and I'm suprised at this last order of SP 20's hitting 1650 gh stable. Very content customer on this last round. The first batch I cannot get past 1545 GH. Watts fan everything at max. I even swapped placment with the new one to see if I have a bigger airflow problem then I already know is brewing up. But same results, just better Asics I suppose.
after seeing my results try under clock and under volt I am using 747 watts to get 1380gh
|
|
|
|
stan258
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 24, 2014, 11:32:39 PM |
|
I don't run the coolest cold aisles in the world and I'm suprised at this last order of SP 20's hitting 1650 gh stable. Very content customer on this last round. The first batch I cannot get past 1545 GH. Watts fan everything at max. I even swapped placment with the new one to see if I have a bigger airflow problem then I already know is brewing up. But same results, just better Asics I suppose.
after seeing my results try under clock and under volt I am using 747 watts to get 1380gh I will run one from the October and one front this batch with your settings later tonight. Had to go to the regular job.
|
|
|
|
RchGrav
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
November 25, 2014, 12:17:51 AM |
|
Is there anyway to cut the fan speed to less than 40? I plan on under clocking and am interested in reducing noise.
edit /etc/mg_custom_rate via ssh looks like this is a new file miner-FL1444045011# ls mg* -1mg_custom_mode mg_custom_mode_sp20 mg_custom_mode_sp30 mg_disabled_asics mg_disabled_asics_sp20 mg_disabled_asics_sp30 mg_generic_psu mg_psu_limit mg_try_12v_fix mg_work_mode miner-FL1444045011# What is the format to include the 30% fan rate? Even better you could just change the PHP file so that you don't have to keep manually editing the mg_custom_mode_sp20 file... Old code <select name="FAN" id="fan_speed_select"> <?php for($i = 40; $i < 101; $i += 10){ printf('<option value="%d" %s>%d</option>' } ?> </select>
New code <select name="FAN" id="fan_speed_select"> <?php for($i = 30; $i < 101; $i += 10){ printf('<option value="%d" %s>%d</option>' } ?> </select>
You can find this in /var/www/SP2x/settings.php around line 312 in Sp20 firmware version 2.5.27.. or you could probably just search the file for fan_speed_select.
|
4C 6F 6E 67 4C 69 76 65 42 69 74 63 6F 69 6E Qba'g lbh unir nalguvat orggre gb qb?
|
|
|
|