|
Zelek Uther
|
 |
December 01, 2014, 06:44:32 PM |
|
Interesting news  . http://www.coindesk.com/spondoolies-tech-ceo-talks-new-asics-blockchain-lottery-device/Spondoolies-Tech is currently working on two separate designs: a 28nm ASIC set to launch in early 2015, followed by fourth-generation chips manufactured using an unspecified FinFET node. Most cryptocurrency ASIC companies do not disclose their manufacturing partners and Spondoolies is no exception. Instead of describing the new chip as a 14nm or 16nm design, which would more or less identify the foundry, Corem prefers to use "advanced process" FinFET terminology.
...Corem indicated that Spondoolies has made a conscious decision to skip the 20nm node altogether. oooooh that is an exciting morsel  and completely backs up what I said months ago about 20nm being a stepping stone. i like it when raskul is always right Spondoolies-Tech's next-generation platform will not be suitable for home mining, however, as it will feature 10 hashing boards, each with its own PSU. Whoa! 10 power supplies! Interested to see what this will look like... |
Run a Bitcoin node, support the network.
|
|
|
|
|
|
|
|
|
|
|
|
The network tries to produce one block per 10 minutes. It does this by automatically adjusting how difficult it is to produce blocks.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
ElGabo
|
|
December 01, 2014, 06:46:16 PM |
|
When do you guys usually got tracking for the shipment?
I got in e-mail from sales that my order will ship today but no tracking yet.
6 or more hours later Great thanks! Faster then Bitmain. (I usually had them in hand befor got the tracking. Sidenote: It was not problem for me) The only thing why I ask because I usually go to the DHL or UPS depo for the stuff close after it passes cutoms. This run takes me 200km there and 200 more back. So if I got the tracking I can plan my next day or the day after. |
" I'm waiting for my punishment, I know it's on my way
So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
|
raskul
|
|
December 01, 2014, 07:00:15 PM |
|
Interesting news . http://www.coindesk.com/spondoolies-tech-ceo-talks-new-asics-blockchain-lottery-device/Spondoolies-Tech is currently working on two separate designs: a 28nm ASIC set to launch in early 2015, followed by fourth-generation chips manufactured using an unspecified FinFET node. Most cryptocurrency ASIC companies do not disclose their manufacturing partners and Spondoolies is no exception. Instead of describing the new chip as a 14nm or 16nm design, which would more or less identify the foundry, Corem prefers to use "advanced process" FinFET terminology.
...Corem indicated that Spondoolies has made a conscious decision to skip the 20nm node altogether. oooooh that is an exciting morsel and completely backs up what I said months ago about 20nm being a stepping stone. i like it when raskul is always right Spondoolies-Tech's next-generation platform will not be suitable for home mining, however, as it will feature 10 hashing boards, each with its own PSU. Whoa! 10 power supplies! Interested to see what this will look like... one thing is for sure.. it's not going in my mum's garage! |
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
Biffa
Legendary
 Offline
Activity: 3220
Merit: 1220
|
|
December 01, 2014, 08:42:03 PM |
|
Interesting news . http://www.coindesk.com/spondoolies-tech-ceo-talks-new-asics-blockchain-lottery-device/Spondoolies-Tech is currently working on two separate designs: a 28nm ASIC set to launch in early 2015, followed by fourth-generation chips manufactured using an unspecified FinFET node. Most cryptocurrency ASIC companies do not disclose their manufacturing partners and Spondoolies is no exception. Instead of describing the new chip as a 14nm or 16nm design, which would more or less identify the foundry, Corem prefers to use "advanced process" FinFET terminology.
...Corem indicated that Spondoolies has made a conscious decision to skip the 20nm node altogether. oooooh that is an exciting morsel and completely backs up what I said months ago about 20nm being a stepping stone. i like it when raskul is always right Spondoolies-Tech's next-generation platform will not be suitable for home mining, however, as it will feature 10 hashing boards, each with its own PSU. Whoa! 10 power supplies! Interested to see what this will look like... one thing is for sure.. it's not going in my mum's garage! Under the bed then? |
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7851
'The right to privacy matters'
|
|
December 01, 2014, 10:21:41 PM
Last edit: December 01, 2014, 10:45:07 PM by philipma1957 |
|
well I have one in hand . One shipping and in Germany One marked shipped no tracking. this will give me 3 sp20's I think I should buy one more. Need some more coins. And it is done just purchased # 4 used raskul's link tx id https://blockchain.info/tx/09eac4c6708a9ee9c63ac570df72f77fc5c899f7521b7500a0536393accaaae1I will run 4 sp20's and 4 s-3's on 3 evga 1300's and 1 evga 1600 should give me 7-8th and I am done til feb for gear. |
|
|
|
|
DevonMiner
|
|
December 01, 2014, 10:51:19 PM
Last edit: December 01, 2014, 11:09:13 PM by DevonMiner |
|
One marked shipped no tracking.
Received a confirmation Sponds email that a SP20 had shipped today, but unusually it said 'Being shipped via Other' and no shipping docs attached. All previous orders had quoted a DHL waybill number so I could track along with attached shipping docs ... now I can't track anything. (UPS works so much better in the UK). |
|
|
|
|
|
raskul
|
|
December 01, 2014, 10:55:22 PM |
|
used raskul's link
thanks phil, looks like those block tx fees at mmpool are gonna be all yours for the foreseeable.  i'll have some catching up to do. very much appreciated that you used my link again... when biffa's is far prettier  |
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
|
raskul
|
|
December 01, 2014, 10:56:09 PM |
|
[quote author=raskul link=topic=521520.msg9710087#msg9710087 date=1417460415]
[quote author=Zelek Uther link=topic=521520.msg9709936#msg9709936 date=1417459472]
[quote author=raskul link=topic=521520.msg9708340#msg9708340 date=1417448263]
[quote author=Biodom link=topic=521520.msg9708324#msg9708324 date=1417448195]
Interesting news ;).
http://www.coindesk.com/spondoolies-tech-ceo-talks-new-asics-blockchain-lottery-device/
[quote]Spondoolies-Tech is currently working on two separate designs: a 28nm ASIC set to launch in early 2015, followed by fourth-generation chips manufactured using an unspecified FinFET node. Most cryptocurrency ASIC companies do not disclose their manufacturing partners and Spondoolies is no exception. Instead of describing the new chip as a 14nm or 16nm design, which would more or less identify the foundry, Corem prefers to use "advanced process" FinFET terminology.
...Corem indicated that Spondoolies has made a conscious decision to skip the 20nm node altogether.[/quote]
[/quote]
oooooh that is an exciting morsel ;D
and completely backs up what I said months ago about 20nm being a stepping stone.
i like it when raskul is always right
[/quote]
[quote]Spondoolies-Tech's next-generation platform will not be suitable for home mining, however, as it will feature 10 hashing boards, each with its own PSU.[/quote]
Whoa! 10 power supplies! Interested to see what this will look like...
[/quote]
one thing is for sure.. it's not going in my mum's garage!
[/quote]
Under the bed then? i'll consult with the missus on that one  |
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
December 01, 2014, 11:14:06 PM |
|
used raskul's link
thanks phil, looks like those block tx fees at mmpool are gonna be all yours for the foreseeable. i'll have some catching up to do. very much appreciated that you used my link again... when biffa's is far prettier LOL but you have a much better story than me  |
|
|
|
|
raskul
|
|
December 01, 2014, 11:17:51 PM |
|
used raskul's link
thanks phil, looks like those block tx fees at mmpool are gonna be all yours for the foreseeable. i'll have some catching up to do. very much appreciated that you used my link again... when biffa's is far prettier LOL but you have a much better story than me damn mate, you don't know half of it. www.thescribe.euit still hurts like hell to know that everything i wrote there was from personal experience. sorry, gone o/t. just to assure though.. the story has a happy ending i *think* lol |
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
|
December 02, 2014, 04:40:50 AM |
|
Those Sp20's in an isolated room or away from family living? Just cause of the noise. |
|
|
|
RoadStress
Legendary
Offline
Activity: 1904
Merit: 1007
|
|
December 02, 2014, 05:00:58 AM |
|
LOL but you have a much better story than me Nice sig! |
|
|
|
philipma1957
Legendary
Offline
Activity: 4116
Merit: 7851
'The right to privacy matters'
|
|
December 02, 2014, 05:03:27 AM |
|
Those Sp20's in an isolated room or away from family living? Just cause of the noise. They are not loud if you downclock. I would say medium vs loud. At 70 and 80 settings they are loud. My fan is set to 40 on the one I have. my sp20 uses only 730 watts and 1300gh this is about 0.56 watts they are also in the attached garage so sound isolates from my living area. I am trying to find the lowest settings I can do on this machine. Reminds me a lot of running GPU's back in the day. Underclock saved a ton of power and heat. |
|
|
|
opentoe
Legendary
Offline
Activity: 1274
Merit: 1000
Personal text my ass....
|
|
December 02, 2014, 05:14:01 AM |
|
Those Sp20's in an isolated room or away from family living? Just cause of the noise. They are not loud if you downclock. I would say medium vs loud. At 70 and 80 settings they are loud. My fan is set to 40 on the one I have. my sp20 uses only 730 watts and 1300gh this is about 0.56 watts they are also in the attached garage so sound isolates from my living area. I am trying to find the lowest settings I can do on this machine. Reminds me a lot of running GPU's back in the day. Underclock saved a ton of power and heat. I have an attached garage too, but I keep my car in it. Only a single car garage. Winter time is nice for running gear in there, but when it gets hot, the garage gets over 100 degrees so that's not even an option. I have C1's spread all over right now doing a pretty good job of keeping my heat off for now. Just issues with one. Add them up and my SP10, around 5.5TH/s. |
|
|
|
Barbara123
Newbie
Offline
Activity: 3
Merit: 0
|
|
December 02, 2014, 06:00:11 AM |
|
I was specifically referring to barabara, who in the emails where i asked for a discount neglected to mention any sale and in fact advised me to buy asap... would it not THEN have been logical to mention there is a sale starting imminently...? OK, so will you (SPT) honor the 100USD discount seeing as my order is still 'pending & unfulfilled' $940.00 ? Yes, we will honor the $100. Please e-mail me at sales@spondoolies-tech.com. Barbara Barbara, I have a support ticket open with you. Why are you not replying to my emails, it has been 5 days now since your last and only reply advising me to try the SP20 firmware on my SP10? Barbara, still waiting for a reply for my support ticket. Can i please get some assistance, going on week 3 now? Write to my skype (don't just add contact, write a message - I don't see people who just add contact for some reason). To Edgar, please e-mail us at support@spondoolies-com. I need to see why you have not had a response - I cannot identify this from the blog posts. Thanks |
|
|
|
|
|
ElGabo
|
|
December 02, 2014, 07:03:15 AM |
|
Just an update. Got the tracking from Dhl 4 hours ago. |
" I'm waiting for my punishment, I know it's on my way
So cut, cut, cut me up and fuck, fuck, fuck me up"
|
|
|
|
raskul
|
|
December 02, 2014, 08:20:28 AM |
|
Just an update. Got the tracking from Dhl 4 hours ago. Excellent  |
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
December 02, 2014, 09:14:42 AM
Last edit: December 02, 2014, 09:29:02 AM by Biffa |
|
My last one: - Paid Friday 28th Nov 1AM
- Confirmation Friday 1:30AM
- Shipped email Sunday: 3PM
- Picked up Tel Aviv Sunday 11PM
- Currently in UK customs since Tuesday 1AM
|
|
|
|
|
raskul
|
|
December 02, 2014, 09:20:56 AM |
|
My last one: - Paid Friday 20th Nov 1AM
- Confirmation Friday 1:30AM
- Shipped email Sunday: 3PM
- Picked up Tel Aviv Sunday 11PM
- Currently in UK customs since Tuesday 1AM
i presume you paid via bank tx? |
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
December 02, 2014, 09:27:54 AM |
|
My last one: - Paid Friday 28th Nov 1AM
- Confirmation Friday 1:30AM
- Shipped email Sunday: 3PM
- Picked up Tel Aviv Sunday 11PM
- Currently in UK customs since Tuesday 1AM
i presume you paid via bank tx? Nope [edit] 28th not 20th sorry |
|
|
|
|
