[XMR] Monero - A secure, private, untraceable cryptocurrency

[elrippos friend]

This looks interesting,

https://www.reddit.com/r/onions/comments/ct6zjf/moneromixer_a_simple_tool_to_help_you_anonymously/?utm_medium=android_app&utm_source=share

Where can I get some precompiled binaries. Loool.

I really wish xmr.to would add a few other coins, that's one of the best privacy tools I know of.

I was making a joke of what would be added to recompiled binaries.

Yes i know, if it looks too good to be true it probably is, but a Monero based privacy tool for other alts like ETH would be awesome,  and maybe one day xmr.to adds a few other coins, like ETH.

Edit, I use xmr.to all the time, anytime I send btc, but for ETH it's hard to remove your history

Good fopr the masses, no tool for me 

[gembitz]

This looks interesting,

https://www.reddit.com/r/onions/comments/ct6zjf/moneromixer_a_simple_tool_to_help_you_anonymously/?utm_medium=android_app&utm_source=share

Where can I get some precompiled binaries. Loool.

I really wish xmr.to would add a few other coins, that's one of the best privacy tools I know of.

I was making a joke of what would be added to recompiled binaries.

Yes i know, if it looks too good to be true it probably is, but a Monero based privacy tool for other alts like ETH would be awesome,  and maybe one day xmr.to adds a few other coins, like ETH.

Edit, I use xmr.to all the time, anytime I send btc, but for ETH it's hard to remove your history

Good fopr the masses, no tool for me 

points to double spend bug exchange..hmm looks safe! ha

[BldSwtTrs]

I have restored my Ledger Nano S seeds on another device. When I try to open the GUI with the new device, I get the following error message after entering the password:

"Couldn't open wallet: Wrong Device Status : SW=6930 (EXPECT=9000, MASK=ffff)"

Why is that?
All works fine with the old device.

What version of the Ledger Monero app is running on the new device?

v1.2.2 on the old device (working properly)

v1.3.1 on the new device (with the error message)

What is the version of the Monero GUI software?

Monero GUI software is v0.14.0.0

So any ideas where the problem could come from?

I have tried to restaure another old Ledger Nano S on the new Nano S and I have the same error message.

Basically the GUI works fine with my two old Ledger but I cannot use the GUI after restauring any of them on my new Ledger.

The Monero app version of both old Ledger is 1.2.2 and the version on the new is 1.3.1 (I cannot use the 1.2.2 on the new, because once I restaure the seed I have to install the Monero app through Ledger Manager, and only the last version is available).

[dEBRUYNE]

I have restored my Ledger Nano S seeds on another device. When I try to open the GUI with the new device, I get the following error message after entering the password:

"Couldn't open wallet: Wrong Device Status : SW=6930 (EXPECT=9000, MASK=ffff)"

Why is that?
All works fine with the old device.

What version of the Ledger Monero app is running on the new device?

v1.2.2 on the old device (working properly)

v1.3.1 on the new device (with the error message)

What is the version of the Monero GUI software?

Monero GUI software is v0.14.0.0

So any ideas where the problem could come from?

I have tried to restaure another old Ledger Nano S on the new Nano S and I have the same error message.

Basically the GUI works fine with my two old Ledger but I cannot use the GUI after restauring any of them on my new Ledger.

The Monero app version of both old Ledger is 1.2.2 and the version on the new is 1.3.1 (I cannot use the 1.2.2 on the new, because once I restaure the seed I have to install the Monero app through Ledger Manager, and only the last version is available).

The Ledger Monero app is currently version sensitive, i.e., you can only run GUI v0.14.0.0 in conjunction with Ledger Monero app v1.2.2. Similarly, you can only run GUI v0.14.1.0 in conjunction with Ledger Monero app v1.3.1. Hopefully this helps.

[Hueristic]

Cross Post:

Fuck me I hope this is not a preclude to shilling Monero. I'd hate to see this twat even mentioning it.

If he tweets "SHUM" I'm dumping!

Why is this Tard going there?

[BldSwtTrs]

I have restored my Ledger Nano S seeds on another device. When I try to open the GUI with the new device, I get the following error message after entering the password:

"Couldn't open wallet: Wrong Device Status : SW=6930 (EXPECT=9000, MASK=ffff)"

Why is that?
All works fine with the old device.

What version of the Ledger Monero app is running on the new device?

v1.2.2 on the old device (working properly)

v1.3.1 on the new device (with the error message)

What is the version of the Monero GUI software?

Monero GUI software is v0.14.0.0

So any ideas where the problem could come from?

I have tried to restaure another old Ledger Nano S on the new Nano S and I have the same error message.

Basically the GUI works fine with my two old Ledger but I cannot use the GUI after restauring any of them on my new Ledger.

The Monero app version of both old Ledger is 1.2.2 and the version on the new is 1.3.1 (I cannot use the 1.2.2 on the new, because once I restaure the seed I have to install the Monero app through Ledger Manager, and only the last version is available).

The Ledger Monero app is currently version sensitive, i.e., you can only run GUI v0.14.0.0 in conjunction with Ledger Monero app v1.2.2. Similarly, you can only run GUI v0.14.1.0 in conjunction with Ledger Monero app v1.3.1. Hopefully this helps.

It does help. Thank you.

[dEBRUYNE]

I have restored my Ledger Nano S seeds on another device. When I try to open the GUI with the new device, I get the following error message after entering the password:

"Couldn't open wallet: Wrong Device Status : SW=6930 (EXPECT=9000, MASK=ffff)"

Why is that?
All works fine with the old device.

What version of the Ledger Monero app is running on the new device?

v1.2.2 on the old device (working properly)

v1.3.1 on the new device (with the error message)

What is the version of the Monero GUI software?

Monero GUI software is v0.14.0.0

So any ideas where the problem could come from?

I have tried to restaure another old Ledger Nano S on the new Nano S and I have the same error message.

Basically the GUI works fine with my two old Ledger but I cannot use the GUI after restauring any of them on my new Ledger.

The Monero app version of both old Ledger is 1.2.2 and the version on the new is 1.3.1 (I cannot use the 1.2.2 on the new, because once I restaure the seed I have to install the Monero app through Ledger Manager, and only the last version is available).

The Ledger Monero app is currently version sensitive, i.e., you can only run GUI v0.14.0.0 in conjunction with Ledger Monero app v1.2.2. Similarly, you can only run GUI v0.14.1.0 in conjunction with Ledger Monero app v1.3.1. Hopefully this helps.

It does help. Thank you.

You're welcome.

[visdude]

I haven't really been following the mobile wallet scene. That said, is there currently one (preferably FOSS for Android) that's capable of importing a view-only wallet from monero-gui for primarily montoring incoming transactions/balances in real time while I'm out and about?

[TheFuzzStone]

I haven't really been following the mobile wallet scene. That said, is there currently one (preferably FOSS for Android) that's capable of importing a view-only wallet from monero-gui for primarily montoring incoming transactions/balances in real time while I'm out and about?

https://www.monerujo.io/

[visdude]

I haven't really been following the mobile wallet scene. That said, is there currently one (preferably FOSS for Android) that's capable of importing a view-only wallet from monero-gui for primarily montoring incoming transactions/balances in real time while I'm out and about?

https://www.monerujo.io/

Thanks. I'll check it out. I actually installed one of the early releases of Monerujo and explored it a little bit but never got to use it. I don't think the view-only wallet feature was implemented back then.

[takose46]

I haven't really been following the mobile wallet scene. That said, is there currently one (preferably FOSS for Android) that's capable of importing a view-only wallet from monero-gui for primarily montoring incoming transactions/balances in real time while I'm out and about?

https://www.monerujo.io/

Thats very very nice! Its also good that its open source but i would like to see it on iOS too... Also, is anybody experienced from here doing the code reviews/checks  ? Some nasty things can happen to android Apps, when nobody checks their code..

[pressing207]

I have restored my Ledger Nano S seeds on another device. When I try to open the GUI with the new device, I get the following error message after entering the password:

"Couldn't open wallet: Wrong Device Status : SW=6930 (EXPECT=9000, MASK=ffff)"

Why is that?
All works fine with the old device.

What version of the Ledger Monero app is running on the new device?

v1.2.2 on the old device (working properly)

v1.3.1 on the new device (with the error message)

What is the version of the Monero GUI software?

Monero GUI software is v0.14.0.0

So any ideas where the problem could come from?

I have tried to restaure another old Ledger Nano S on the new Nano S and I have the same error message.

Basically the GUI works fine with my two old Ledger but I cannot use the GUI after restauring any of them on my new Ledger.

The Monero app version of both old Ledger is 1.2.2 and the version on the new is 1.3.1 (I cannot use the 1.2.2 on the new, because once I restaure the seed I have to install the Monero app through Ledger Manager, and only the last version is available).

The Ledger Monero app is currently version sensitive, i.e., you can only run GUI v0.14.0.0 in conjunction with Ledger Monero app v1.2.2. Similarly, you can only run GUI v0.14.1.0 in conjunction with Ledger Monero app v1.3.1. Hopefully this helps.

Monero is one of the few coins with a large growth prospect.

[hd49728]

I am not familiar with tools to check basic stuffs of Monero, so I want to ask for help.
Are there tools (sites) that I can use to follow history total daily transaction of Monero (volume, number of transactions, UTXOs, etc.)?
I much appreciate your help if someone can help me with this question.

[chickromero]

I haven't really been following the mobile wallet scene. That said, is there currently one (preferably FOSS for Android) that's capable of importing a view-only wallet from monero-gui for primarily montoring incoming transactions/balances in real time while I'm out and about?

https://i.imgur.com/q2Dr9Th.gifhttps://www.monerujo.io/

Thats very very nice! Its also good that its open source but i would like to see it on iOS too... Also, is anybody experienced from here doing the code reviews/checks  ? Some nasty things can happen to android Apps, when nobody checks their code..

This wallet looks cool. I'll second that about the iOS version. For now, it works for me - I'm mainly on Android anyway. Thanks for sharing.

[Hueristic]

I am not familiar with tools to check basic stuffs of Monero, so I want to ask for help.
Are there tools (sites) that I can use to follow history total daily transaction of Monero (volume, number of transactions, UTXOs, etc.)?
I much appreciate your help if someone can help me with this question.

https://moneroblocks.info/

Check out the rich list.

https://moneroblocks.info/richlist

[anubizz]

This looks interesting,

https://www.reddit.com/r/onions/comments/ct6zjf/moneromixer_a_simple_tool_to_help_you_anonymously/?utm_medium=android_app&utm_source=share

Where can I get some precompiled binaries. Loool.

I really wish xmr.to would add a few other coins, that's one of the best privacy tools I know of.

I was making a joke of what would be added to recompiled binaries.

Yes i know, if it looks too good to be true it probably is, but a Monero based privacy tool for other alts like ETH would be awesome,  and maybe one day xmr.to adds a few other coins, like ETH.

Edit, I use xmr.to all the time, anytime I send btc, but for ETH it's hard to remove your history

Yes these guys are great! There is nothing bad to say about xmr.to
But i would be happy if they add an exchange option without having to set a fixed BTC ammount at the beginning. So: you get an monero address and send your avaliable monero to it, without fixing an ammount. And you get the exchanged ammount payed out, depending on monero sent.

[HSCrew]

Monero is Numero Uno !!!

[phishead]

Hey guys, just made some new cold storage notes that are a non-for-profit effort to raise money for the dev fund/CCS proposal.

Check it out here

https://bitcointalk.org/index.php?topic=5182081.new#new

[binaryFate]

Yes these guys are great! There is nothing bad to say about xmr.to
But i would be happy if they add an exchange option without having to set a fixed BTC ammount at the beginning. So: you get an monero address and send your avaliable monero to it, without fixing an ammount. And you get the exchanged ammount payed out, depending on monero sent.

Soon a feature will be added to specify the amount in XMR (instead of BTC).
Estimate is in a month.

[gembitz]

Hey guys, just made some new cold storage notes that are a non-for-profit effort to raise money for the dev fund/CCS proposal.

Check it out here

https://bitcointalk.org/index.php?topic=5182081.new#new

butterfly labs?    Lol!!