not.you
Legendary
Offline
Activity: 1726
Merit: 1018
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 06:26:59 PM |
|
The blue wire trick works same as on the S1's if you want to bring your temps down.
|
|
|
|
tempestb
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 06:33:13 PM |
|
Whatever you do, don't cut the blue wire! Ok, now cut the blue wire.
|
1D7JwRnoungL1YQy7sJMsqmA8BHkPcKGDJ We mine as we dream... Alone
|
|
|
Swimmer63
Legendary
Offline
Activity: 1593
Merit: 1004
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 06:33:57 PM |
|
Wow it really looks like Bitmain dropped the ball on these. ALL the S1's were rock solid and everybody got the same hash rate. Plus everyone could overclock if you so desired.
These S3's have hash rates all over the board. Some work right some dont.
My units are running at 440 GH right out of the box with stock clock. Guess I was lucky, but luck shouldn't have anything to do with it.
Wonder if they will fix these problems or just keep pumping out defective units ?
Bob
No - S1's hashrate varied as all miners do.
|
|
|
|
BCTANN
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/question.gif) |
July 23, 2014, 06:46:18 PM |
|
![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Has anyone figured out how to fix the seemingly random beep ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Everything seems to be functioning properly on my set of S3's, except for the random beep. I've seen breadcrumbs of others experiencing this issue and some novel band-aid repairs, but no serious fix yet. Symptom:Unit randomly sounds a single notification beep; similar to p.o.s.t beep when booting a desktop PC with a missing keyboard. Issue:Unknown. Troubleshooting:Reviewed and verified settings on unit. Reviewed network settings. Reviewed unit and network logs. Flashed firmware. Used traffic monitor for disconnect notification. Resolution:Unknown. A few (novel) band-aids have been offered, but no serious fix to date.
|
|
|
|
iglasses
Legendary
Offline
Activity: 1148
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 06:47:39 PM |
|
It's an open item...been some solutions itt but right now there is no magic 'stop beeping' button.
|
I only have a signature because I'm allowed.
|
|
|
Biodom
Legendary
Offline
Activity: 3878
Merit: 4300
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 06:57:30 PM |
|
![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Has anyone figured out how to fix the seemingly random beep ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Everything seems to be functioning properly on my set of S3's, except for the random beep. I've seen breadcrumbs of others experiencing this issue and some novel band-aid repairs, but no serious fix yet. Symptom:Unit randomly sounds a single notification beep; similar to p.o.s.t beep when booting a desktop PC with a missing keyboard. Issue:Unknown. Troubleshooting:Reviewed and verified settings on unit. Reviewed network settings. Reviewed unit and network logs. Flashed firmware. Used traffic monitor for disconnect notification. Resolution:Unknown. A few (novel) band-aids have been offered, but no serious fix to date. re beeps: 1. did you try to switch it off in web gui? 2. In my case(s) there is a perfect correlation between pool switching difficulty setting and a single "beep"
|
|
|
|
faetos
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:02:25 PM |
|
Got both units today and happily hashing on defaults at 450Gh/s for each unit. No issues at all.
Thank you, Bitmain. I am a very happy customer.
|
|
|
|
Biodom
Legendary
Offline
Activity: 3878
Merit: 4300
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:10:07 PM |
|
Got both units today and happily hashing on defaults at 450Gh/s for each unit. No issues at all.
Thank you, Bitmain. I am a very happy customer.
my ups is always coming after 6:30pm here. 2 more units expected today as well. 450 at the pool or in web gui?
|
|
|
|
faetos
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:17:38 PM |
|
Got both units today and happily hashing on defaults at 450Gh/s for each unit. No issues at all.
Thank you, Bitmain. I am a very happy customer.
my ups is always coming after 6:30pm here. 2 more units expected today as well. 450 at the pool or in web gui? It's settled to more like 440 and that is on the webui. Power draw is low, which is good. I got lucky and rushed home and was able to sign for it as soon as I walked in the door. I felt like a kid on Xmas which is a bit silly, but I love this stuff. I'm going to let them burn in for a bit before I start mucking with frequencies or I may just let them be. They have no hardware errors on either box. Only 1 of my S1s was that lucky.
|
|
|
|
BCTANN
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:23:48 PM |
|
![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Has anyone figured out how to fix the seemingly random beep ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Everything seems to be functioning properly on my set of S3's, except for the random beep. I've seen breadcrumbs of others experiencing this issue and some novel band-aid repairs, but no serious fix yet. Symptom:Unit randomly sounds a single notification beep; similar to p.o.s.t beep when booting a desktop PC with a missing keyboard. Issue:Unknown. Troubleshooting:Reviewed and verified settings on unit. Reviewed network settings. Reviewed unit and network logs. Flashed firmware. Used traffic monitor for disconnect notification. Resolution:Unknown. A few (novel) band-aids have been offered, but no serious fix to date. re beeps: 1. did you try to switch it off in web gui? 2. In my case(s) there is a perfect correlation between pool switching difficulty setting and a single "beep" Excellent! How did you verify the correlation between pool difficulty increase/decrease? I'd like to do the same. I didn't switch off the disco notification setting because I want to know when there is a legitimate connectivity issue.
|
|
|
|
Biodom
Legendary
Offline
Activity: 3878
Merit: 4300
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:35:49 PM |
|
![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Has anyone figured out how to fix the seemingly random beep ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Everything seems to be functioning properly on my set of S3's, except for the random beep. I've seen breadcrumbs of others experiencing this issue and some novel band-aid repairs, but no serious fix yet. Symptom:Unit randomly sounds a single notification beep; similar to p.o.s.t beep when booting a desktop PC with a missing keyboard. Issue:Unknown. Troubleshooting:Reviewed and verified settings on unit. Reviewed network settings. Reviewed unit and network logs. Flashed firmware. Used traffic monitor for disconnect notification. Resolution:Unknown. A few (novel) band-aids have been offered, but no serious fix to date. re beeps: 1. did you try to switch it off in web gui? 2. In my case(s) there is a perfect correlation between pool switching difficulty setting and a single "beep" Excellent! How did you verify the correlation between pool difficulty increase/decrease? I'd like to do the same. I didn't switch off the disco notification setting because I want to know when there is a legitimate connectivity issue. I was looking at the web gui, saw the diff change and heard the beep a fraction of a second later- and it happened 3 times already.
|
|
|
|
|
Beans
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:40:40 PM |
|
One of the temps on my s3 is showing 248 which is keeping the fans at full speed. Otherwise it seems to be working. Anyone else have this problem?
|
|
|
|
windpath
Legendary
Offline
Activity: 1258
Merit: 1027
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:41:25 PM |
|
p2pool.org is NOT directly affiliated with p2pool, it is a p2pool node operated by an individual. http://minefast.coincadence.com is my p2pool node, if you click the link you quoted above you will see exactly what I'm earning. The official homepage for the p2pool project is: http://p2pool.in/
|
|
|
|
jonnybravo0311
Legendary
Offline
Activity: 1344
Merit: 1024
Mine at Jonny's Pool
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:48:35 PM |
|
One of the temps on my s3 is showing 248 which is keeping the fans at full speed. Otherwise it seems to be working. Anyone else have this problem?
248??? You might want to shut that unit down ASAP. That is completely unsafe. Your units should never be reporting anywhere near that high.
|
Jonny's Pool - Mine with us and help us grow! Support a pool that supports Bitcoin, not a hardware manufacturer's pockets! No SPV cheats. No empty blocks.
|
|
|
faetos
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:49:38 PM |
|
One of the temps on my s3 is showing 248 which is keeping the fans at full speed. Otherwise it seems to be working. Anyone else have this problem?
What are you baking in there? It should shut off at 80C. Both of mine are no higher than 41C. Either the temperature gauge is way off or you've got thermal paste spread all over it like peanut butter.
|
|
|
|
windpath
Legendary
Offline
Activity: 1258
Merit: 1027
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:50:32 PM |
|
One of the temps on my s3 is showing 248 which is keeping the fans at full speed. Otherwise it seems to be working. Anyone else have this problem?
248??? You might want to shut that unit down ASAP. That is completely unsafe. Your units should never be reporting anywhere near that high. I'm sure its a faulty temp sensor.... Carefully touch the case, if its not hot enough to broil a chicken then its not 248C.
|
|
|
|
not.you
Legendary
Offline
Activity: 1726
Merit: 1018
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:56:04 PM |
|
So when you guys are removing the heatsink to clean it up, are you taking the blades out of the chasis first and and going after the inner heatsink? I got two underperformers and one has a perpetual x on one of the chips in the gui so before I contact bitmain about these POS's I want to give that a shot.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8492
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:57:23 PM |
|
So when you guys are removing the heatsink to clean it up, are you taking the blades out of the chasis first and and going after the inner heatsink? I got two underperformers and one has a perpetual x on one of the chips in the gui so before I contact bitmain about these POS's I want to give that a shot.
Did you ever set it at freq 212.5 to see what you get?
|
|
|
|
faetos
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
July 23, 2014, 07:58:12 PM |
|
One of the temps on my s3 is showing 248 which is keeping the fans at full speed. Otherwise it seems to be working. Anyone else have this problem?
248??? You might want to shut that unit down ASAP. That is completely unsafe. Your units should never be reporting anywhere near that high. I'm sure its a faulty temp sensor.... Carefully touch the case, if its not hot enough to broil a chicken then its not 248C. If it is could you send us some pics of you broiling a chicken on it? That'd be classic.
|
|
|
|
|