[ANN][BURST] Burst | Efficient HDD Mining | New 1.2.3 Fork block 92000

[mmmaybe]

Update miner-burst-1.141003
https://www.dropbox.com/s/qbtha77wq1mucgc/miner-burst-1.141003.zip?dl=0

Removed:
- Support for Dev's pools (temporarily)

I'm happy to see "temporarily"    When do you think you can implement it?

Thanks 

now i get issues of crashes miner: "ivalid iterator range", after fix it, i'm implement support Dev's pools.

Thank you  Expect a donation when you get it running!

[1714568311]

1714568311

[1714568311]

1714568311

[1714568311]

1714568311

[1714568311]

1714568311

[bipben]

GPU plot generator v3.0.0

This version comes with a multi-GPU support and greatly enhance the global memory consumption (on both CPU and GPU side). I hope that it will fix the bad performances of NVidia cards (I need some feedback on that point).
This version also add a [verify] command to verify a plotted file against a reference file (a C-plotted file for example).

A big thank you to Palad1n for his help on the qualification phase of this version.
With this new version, we hit the maximum bandwidth of a standard mechanical HDD (around 20k nonces/minutes ~= 83MB/s).
We made a test with a SSD disk too, with only one 280x we touch the 33k nonces/minutes.

As the HDD is now bottleneck, there are two options:
  - Use faster hardware (SSD). It is up to you to test it Feel free to share your experience on the forum (hardware configuration, nonces/minutes obtained).
  - Write to multiple disks at the same time (I will put this on the roadmap).

Changelog:
  - Multi-GPU support.
  - [devices.txt] configuration file added.
  - verify command added.
  - list command split in two (listPlatforms and listDevices).
  - More details added in listDevices command.
  - Correlation between <staggerSize> and <globalWorkSize> removed.
  - OpenCL error codes displayed for better debugging.
  - Details added in usages.
  - README updated and improved.
  - CHANGELOG file added.
  - CREDITS file added.
  - LICENSE file added.

Please read the README provided with both the binaries and the sources. As this version introduce new concepts, please read it carefully, especially the [SETUP] part.

Here are the binaries and the source code :
  - Windows x86: https://mega.co.nz/#!vMUWjCZA!IXkIyupOek6t7bOu0qlrYlxvuzVfRS-N4T8sfJ08u-E
  - Windows x64: https://mega.co.nz/#!bEEmiAyK!IeEzk_TrVpLvFpbWGLvkl5tppmgGXDXI3xBbrh2CfGM
  - Linux x86: https://mega.co.nz/#!ud8HnboC!wVU9EwfYWU4mnc67QP1Pienqo4JRm_QJuaE3AJPw5J0
  - Linux x64: https://mega.co.nz/ #!bZExEDaQ!gygiHlkCVLNNbgIFuruQUnV3yrFz8m5pISXsikHPM_g (remove the space before #, link detected as suspicious...)
  - Sources: https://mega.co.nz/#!fBUEEJKD!e5KnEEVIGN0FK3aaHriS6YstfiDNO6lhRTGen8Dh8a8

If you like this software, support me

Official link: https://burstforum.com/index.php?threads/gpu-plot-generator.45/page-6#post-1925

[crazyearner]

Welcome to the latest and greatest social platform venture for crypto-currency and enthusiasts alike. 

Coinblab features a professional and friendly crypto experience with an amazing UI very similar to existing mainstream social platforms.  Utilize IM to chat with crypto friends, link your activity to your favorite sites, join groups, create your coins pages, create blogs, and so much more.  This is already being revered as the ‘Facebook of Crypto’. 

Please come join us as we expand and ultimately become the main and only source for crypto.  We look forward to your membership. 

http://coinblab.com/

#Coinblab

We look forward to seeing more of your spam k thx bye

[mmmaybe]

Wait for it to get 4 conformations, then you're good to go

Conf I rmations.
Go finish elementary school.


Conformation generally means structural arrangement and may refer to:

Conformational isomerism, a form of stereoisomerism in chemistry
Carbohydrate conformation
Cyclohexane conformation
Protein conformation
Conformation activity relationship between the biological activity and the conformation or conformational changes of a biomolecule
Animal breeding[edit]
Equine conformation evaluates the degree of correctness of a horse's bone structure, musculature, and its body proportions
Conformation (dog) to a particular dog breed
Conformation show, a dog show in which dogs are judged according to how well they conform to the established breed type

What do you contribute to this thread....?

It's really sad to see the same kind of posts over and over again from you. Poor little thing who can't find anything more meningful to do  

I hope life gets better for you soon!  

[burstcoin]

Hey, @burstcoin or uray or someone else, with assetBalances->balanceQNT , why does it give never give you decimals? How can I find where to put the decimal?

Internally everything is done with integer math. Divide by 100000000.(8 zeros)

[Irontiga]

Hey, @burstcoin or uray or someone else, with assetBalances->balanceQNT , why does it give never give you decimals? How can I find where to put the decimal?

Internally everything is done with integer math. Divide by 100000000.(8 zeros)

$bidOrder->priceNQT * $assetBalance->balanceQNT /100000000

gives me different numbers based on the digits of non-zeroes....see what i mean >>> http://127.0.0.1:8125/burst?requestType=getAccount&account=BURST-KHTJ-G3H7-LD2Q-H7LJ6. BMPOOL has 15, which is right, but HardInvest shows 2861 which should be 286.1

EDIT: $bidOrder->priceNQT * $assetBalance->balanceQNT /100000000 this bit actually is fine, but the problem comes in when I'm trying to just show the balance in that asset(so how many of that asset the account has)

[crazyearner]

Not sure what going on made few shares and now {"result":"Passphrase does not match reward recipient"}  any idea why keep on continuing to get problem after problem with this anyone know how to resolve this problem as I had working didn't change anything at all and now get this problem

[burstcoin]

Not sure what going on made few shares and now {"result":"Passphrase does not match reward recipient"}  any idea why keep on continuing to get problem after problem with this anyone know how to resolve this problem as I had working didn't change anything at all and now get this problem

If that just happened once or twice and you didn't change anything it's possible the pool did a rescan on the blockchain. If that is the case, the pool wasn't caught up, and gave the wrong result for ~15 seconds, and everything is probably fine.

[crazyearner]

Not sure what going on made few shares and now {"result":"Passphrase does not match reward recipient"}  any idea why keep on continuing to get problem after problem with this anyone know how to resolve this problem as I had working didn't change anything at all and now get this problem

If that just happened once or twice and you didn't change anything it's possible the pool did a rescan on the blockchain. If that is the case, the pool wasn't caught up, and gave the wrong result for ~15 seconds, and everything is probably fine.

I am continuing to get this result when submitting shares to pool

{"baseTarget":"2505256","height":"19128","generationSignature":"469ccf5b7cfcc776
69154100c5d04a602a6d74744e073b02b54f3b55d99e7a7f"}
New best: 17160993207923721836:2650
Submitting share
{"result":"Passphrase does not match reward recipient"}
{"baseTarget":"2505256","height":"19128","generationSignature":"469ccf5b7cfcc776
69154100c5d04a602a6d74744e073b02b54f3b55d99e7a7f"}

[twig123]

GPU plot generator v3.0.0

This version comes with a multi-GPU support and greatly enhance the global memory consumption (on both CPU and GPU side). I hope that it will fix the bad performances of NVidia cards (I need some feedback on that point).
This version also add a [verify] command to verify a plotted file against a reference file (a C-plotted file for example).

A big thank you to Palad1n for his help on the qualification phase of this version.
With this new version, we hit the maximum bandwidth of a standard mechanical HDD (around 20k nonces/minutes ~= 83MB/s).
We made a test with a SSD disk too, with only one R9 290x we touch the 33k nonces/minutes.

As the HDD is now bottleneck, there are two options:
  - Use faster hardware (SSD). It is up to you to test it Feel free to share your experience on the forum (hardware configuration, nonces/minutes obtained).
  - Write to multiple disks at the same time (I will put this on the roadmap).

Changelog:
  - Multi-GPU support.
  - [devices.txt] configuration file added.
  - verify command added.
  - list command split in two (listPlatforms and listDevices).
  - More details added in listDevices command.
  - Correlation between <staggerSize> and <globalWorkSize> removed.
  - OpenCL error codes displayed for better debugging.
  - Details added in usages.
  - README updated and improved.
  - CHANGELOG file added.
  - CREDITS file added.
  - LICENSE file added.

Please read the README provided with both the binaries and the sources. As this version introduce new concepts, please read it carefully, especially the [SETUP] part.

Here are the binaries and the source code :
  - Windows x86: https://mega.co.nz/#!vMUWjCZA!IXkIyupOek6t7bOu0qlrYlxvuzVfRS-N4T8sfJ08u-E
  - Windows x64: https://mega.co.nz/#!bEEmiAyK!IeEzk_TrVpLvFpbWGLvkl5tppmgGXDXI3xBbrh2CfGM
  - Linux x86: https://mega.co.nz/#!ud8HnboC!wVU9EwfYWU4mnc67QP1Pienqo4JRm_QJuaE3AJPw5J0
  - Linux x64: https://mega.co.nz/ #!bZExEDaQ!gygiHlkCVLNNbgIFuruQUnV3yrFz8m5pISXsikHPM_g (remove the space before #, link detected as suspicious...)
  - Sources: https://mega.co.nz/#!fBUEEJKD!e5KnEEVIGN0FK3aaHriS6YstfiDNO6lhRTGen8Dh8a8

If you like this software, support me

Official link: https://burstforum.com/index.php?threads/gpu-plot-generator.45/page-6#post-1925

Awesome!
Are we able to plot with large stagger sizes in this version?

[SpeedDemon13]

GPU plot generator v3.0.0

This version comes with a multi-GPU support and greatly enhance the global memory consumption (on both CPU and GPU side). I hope that it will fix the bad performances of NVidia cards (I need some feedback on that point).
This version also add a [verify] command to verify a plotted file against a reference file (a C-plotted file for example).

A big thank you to Palad1n for his help on the qualification phase of this version.
With this new version, we hit the maximum bandwidth of a standard mechanical HDD (around 20k nonces/minutes ~= 83MB/s).
We made a test with a SSD disk too, with only one R9 290x we touch the 33k nonces/minutes.

As the HDD is now bottleneck, there are two options:
  - Use faster hardware (SSD). It is up to you to test it Feel free to share your experience on the forum (hardware configuration, nonces/minutes obtained).
  - Write to multiple disks at the same time (I will put this on the roadmap).

Changelog:
  - Multi-GPU support.
  - [devices.txt] configuration file added.
  - verify command added.
  - list command split in two (listPlatforms and listDevices).
  - More details added in listDevices command.
  - Correlation between <staggerSize> and <globalWorkSize> removed.
  - OpenCL error codes displayed for better debugging.
  - Details added in usages.
  - README updated and improved.
  - CHANGELOG file added.
  - CREDITS file added.
  - LICENSE file added.

Please read the README provided with both the binaries and the sources. As this version introduce new concepts, please read it carefully, especially the [SETUP] part.

Here are the binaries and the source code :
  - Windows x86: https://mega.co.nz/#!vMUWjCZA!IXkIyupOek6t7bOu0qlrYlxvuzVfRS-N4T8sfJ08u-E
  - Windows x64: https://mega.co.nz/#!bEEmiAyK!IeEzk_TrVpLvFpbWGLvkl5tppmgGXDXI3xBbrh2CfGM
  - Linux x86: https://mega.co.nz/#!ud8HnboC!wVU9EwfYWU4mnc67QP1Pienqo4JRm_QJuaE3AJPw5J0
  - Linux x64: https://mega.co.nz/ #!bZExEDaQ!gygiHlkCVLNNbgIFuruQUnV3yrFz8m5pISXsikHPM_g (remove the space before #, link detected as suspicious...)
  - Sources: https://mega.co.nz/#!fBUEEJKD!e5KnEEVIGN0FK3aaHriS6YstfiDNO6lhRTGen8Dh8a8

If you like this software, support me

Official link: https://burstforum.com/index.php?threads/gpu-plot-generator.45/page-6#post-1925

Would it be more beneficial for hdds to run in RAID arrays now, ie. RAID0? As for ssds, that not a very cost efficient alternative...lol.....I'll send you some burst and thank you for all the efforts, more likely the middle to end of next week.

[Palad1n]

GPU plot generator v3.0.0

This version comes with a multi-GPU support and greatly enhance the global memory consumption (on both CPU and GPU side). I hope that it will fix the bad performances of NVidia cards (I need some feedback on that point).
This version also add a [verify] command to verify a plotted file against a reference file (a C-plotted file for example).

A big thank you to Palad1n for his help on the qualification phase of this version.
With this new version, we hit the maximum bandwidth of a standard mechanical HDD (around 20k nonces/minutes ~= 83MB/s).
We made a test with a SSD disk too, with only one R9 290x we touch the 33k nonces/minutes.

As the HDD is now bottleneck, there are two options:
  - Use faster hardware (SSD). It is up to you to test it Feel free to share your experience on the forum (hardware configuration, nonces/minutes obtained).
  - Write to multiple disks at the same time (I will put this on the roadmap).

Changelog:
  - Multi-GPU support.
  - [devices.txt] configuration file added.
  - verify command added.
  - list command split in two (listPlatforms and listDevices).
  - More details added in listDevices command.
  - Correlation between <staggerSize> and <globalWorkSize> removed.
  - OpenCL error codes displayed for better debugging.
  - Details added in usages.
  - README updated and improved.
  - CHANGELOG file added.
  - CREDITS file added.
  - LICENSE file added.

Please read the README provided with both the binaries and the sources. As this version introduce new concepts, please read it carefully, especially the [SETUP] part.

Here are the binaries and the source code :
  - Windows x86: https://mega.co.nz/#!vMUWjCZA!IXkIyupOek6t7bOu0qlrYlxvuzVfRS-N4T8sfJ08u-E
  - Windows x64: https://mega.co.nz/#!bEEmiAyK!IeEzk_TrVpLvFpbWGLvkl5tppmgGXDXI3xBbrh2CfGM
  - Linux x86: https://mega.co.nz/#!ud8HnboC!wVU9EwfYWU4mnc67QP1Pienqo4JRm_QJuaE3AJPw5J0
  - Linux x64: https://mega.co.nz/ #!bZExEDaQ!gygiHlkCVLNNbgIFuruQUnV3yrFz8m5pISXsikHPM_g (remove the space before #, link detected as suspicious...)
  - Sources: https://mega.co.nz/#!fBUEEJKD!e5KnEEVIGN0FK3aaHriS6YstfiDNO6lhRTGen8Dh8a8

If you like this software, support me

Official link: https://burstforum.com/index.php?threads/gpu-plot-generator.45/page-6#post-1925

And you Cryo, very big thanks!
Version 3.0 came out great and at the moment it has everything you need to begin now to create a lot of plots without problems.

Steps for creating this version taken from the author is not a short time. Respect him for that!

I transferred to Cryo 5000 Burst. Good people, I will always support!

[mmmaybe]

GPU plot generator v3.0.0

This version comes with a multi-GPU support and greatly enhance the global memory consumption (on both CPU and GPU side). I hope that it will fix the bad performances of NVidia cards (I need some feedback on that point).
This version also add a [verify] command to verify a plotted file against a reference file (a C-plotted file for example).

Official link: https://burstforum.com/index.php?threads/gpu-plot-generator.45/page-6#post-1925

Thanks alot  Have done some initial testing on nvidia, and I think it's faster but foremost it can handle much larger stagger sizes. And I'm just on tiny 750ti's

Donation incmming 

[crazyearner]

Who ever the owner of http://burstpool.ddns.net/ needs to fix pool as I cant mine on it and constantly getting passphrase incorrect and no logner submitting shares

Just gone back onto http://burst-pool.cryptoport.io to check and this is working perfectly fine submitting and working

[bathrobehero]

GPU plot generator v3.0.0

Awesome!

Fooling around a bit with it, 2 x 780 Ti went over 60k n/m and I'm fairly certain they could have gone higher if it weren't for the I/O limitation.

The highest stagger I could reach was 16383 which is just below 4GB RAM which is the maximum it could allocate even though I have 16 GB. And that is completely regardless of VRAM amount.

[Tommo_Aus]

Hi all,

I've setup a BURST pool at http://tompool.org:82, it appears to be working however I'm not seeing the share tally change. I only have about 800GB plotted so far but the other miner has around 6TB. Is this simply a case of low plotting power meaning the shares are too insignificant to be counted in 2 decimal places or am I missing a setting?

The best share I've seen on the pool so far is 41 years :/

Greatly appreciate any help!

Bump :-)

[coinits]

C-CEX lost my deposit again. Over 6000 BURST. I wonder how long, if ever, it will take to get my coins back this time?

Come on C-CEX. No need of this.

[Irontiga]

--Announcement--

new blockex, still has problems with the balance of assets showing up wrong, but value is right. Will keep making it better, this is just a start.

http://blockex.burstcoin.info

[koko2530]

Buy hash power @ cryptomining.farm

http://cryptomining.farm/mining.html

 

[mmmaybe]

GPU plot generator v3.0.0

This version comes with a multi-GPU support and greatly enhance the global memory consumption (on both CPU and GPU side). I hope that it will fix the bad performances of NVidia cards (I need some feedback on that point).
This version also add a [verify] command to verify a plotted file against a reference file (a C-plotted file for example).

Official link: https://burstforum.com/index.php?threads/gpu-plot-generator.45/page-6#post-1925

Getting the following error message some times:

Code:

[ERROR] std::exception

Running 5 devices, within their memory limits. Any ideas...?