[∞ YH] solo.ckpool.org 2% fee solo mining USA/DE 255 blocks solved!

[philipma1957]

No thanks blocks are now 40000 usd

We hit  2 worth 10,000 each
I also hit one worth 12,000 I mined .1 btc at this address


http://solo.ckpool.org/users/1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje


because nicehash cheated a guy a block.

Another guy said  he would point his s7 at the same address for a weekend.
I woke up Sunday morning with a 25 coin deposit in the address

so:
I gave 8.3  to the guy that was fucked a block
I gave 8.3 to the guy that pointed his s-7
I kept 8.3 for me.


the records are back in this thread.
https://bitcointalk.org/index.php?topic=763510.msg11413679#msg11413679

[KingZee]

Please don't spam this thread.
And write you're special questions, in a dedicated thread.
By stupid comments, I meant really stupid comments.

We've been going through this comments over and over again.
Theres no way for me to lie about anything, because you will see our hash rate, you will see the amount of bitcoins stored in a block and etc.

I have been doing a lot of different groups in the past, including solo mining.
And I have no intension in doing anything that you wrote.

If you thing that's way to risky, just don't participate, its up to you to decide.
Its just fun, the adrenaline and etc... when all of us are trying to find a block!

I don't know why the people who instantly go on the defensive and start to insult me, make me question them even more.

Your only trust ratings are from 3 years ago. I still stand by what I said, it's not easy for a third party to see your hash rate because you'll be purchasing multiple rigs. It's not easy to judge if you made a fair split because you could lie about your own share. Or of course, you could just blatantly scam the full amount and exit.

Why not see if philipma1957 would do it?

He did it back in the day and paid off 2 blocks.

I think he hit a third one  and helped out a guy that was fucked by nicehash.

It was when coins were 400-500 and blocks were 25 coins.

Of course, a trusted member or escrow that has been proved to handle that many funds before is probably a safer investment.
-----------------
EDIT:

No thanks blocks are now 40000 usd

We hit  2 worth 10,000 each
I also hit one worth 12,000 I mined .1 btc at this address

Even him knows how much burden it is to take such a responsability. I know you're trusted, but now I personally respect you a lot more philipma1957.

[philipma1957]

Please don't spam this thread.
And write you're special questions, in a dedicated thread.
By stupid comments, I meant really stupid comments.

We've been going through this comments over and over again.
Theres no way for me to lie about anything, because you will see our hash rate, you will see the amount of bitcoins stored in a block and etc.

I have been doing a lot of different groups in the past, including solo mining.
And I have no intension in doing anything that you wrote.

If you thing that's way to risky, just don't participate, its up to you to decide.
Its just fun, the adrenaline and etc... when all of us are trying to find a block!

I don't know why the people who instantly go on the defensive and start to insult me, make me question them even more.

Your only trust ratings are from 3 years ago. I still stand by what I said, it's not easy for a third party to see your hash rate because you'll be purchasing multiple rigs. It's not easy to judge if you made a fair split because you could lie about your own share. Or of course, you could just blatantly scam the full amount and exit.

Why not see if philipma1957 would do it?

He did it back in the day and paid off 2 blocks.

I think he hit a third one  and helped out a guy that was fucked by nicehash.

It was when coins were 400-500 and blocks were 25 coins.

Of course, a trusted member or escrow that has been proved to handle that many funds before is probably a safer investment.
-----------------
EDIT:

No thanks blocks are now 40000 usd

We hit  2 worth 10,000 each
I also hit one worth 12,000 I mined .1 btc at this address

Even him knows how much burden it is to take such a responsability. I know you're trusted, but now I personally respect you a lot more philipma1957.

I went back and check  2 blocks at 25 coins each was 50 blocks  value about 12000 for the two.

the 1 I split 3 ways  was 25 coins at 500 a coin about 12000 grand I gave away 8000 of that.

The difference here is a block is 3500 x 12 = 42000  and you could hit 2 not one.  So I am holding 84k say  10k is mine and the other 74k is  is split 7 ways.  I could have KYC issues  passing  the 10,000 to 7 different people

Or my core with 3 hdd backups could crash and burn.  I don't have 70k  laying around to pay if that happens.

[achkn]

To increase luck of ckpool i point my cursed Antminer S9 to http://solo.ckpool.org/users/18mtqKcCZdi29R9efXRSvvGk3djua9WXN8
When i turn it on - always after a short time someone finds a block.

[DaCryptoRaccoon]

Ok guys, this block is taking forever.
I think its time to go, for a group solo round )
Been a long time since we did something like this.

Ive created a topic : https://bitcointalk.org/index.php?topic=5099979.new#new
And we will start in a week.

I would be up for turning a few of my miners back on to a group solo mine if this was to go ahead and phil was the escrow for it
Not mega power but every little helps

10x v9's
4 s9
7 S3

[minefarmbuy]

To increase luck of ckpool i point my cursed Antminer S9 to http://solo.ckpool.org/users/18mtqKcCZdi29R9efXRSvvGk3djua9WXN8
When i turn it on - always after a short time someone finds a block.

Cursed? Sounds like a lucky charm.

[KingZee]

I was going to send a PM again to ck but thought maybe I'd ask for a community answer to have the opinion of different people, I'm trying to rent a few rigs and gamble a little of my funds on this.

I tried miningrigrentals and I had a miner with a slightly high rejection rate, ck told me it's probably the firmware of the miner and I'm inclined to believe him. I was going to try nicehash now, I used this : https://api.nicehash.com/poolver.jsp

Error: Difficulty too low.
Your pool is shown as incompatible therefore we encourage you to contact pool operator to make sure that the pool is using minimal/starting pool share difficulty which is compatible with our service (and thus compatible with today's miners), please send them following link: https://www.nicehash.com/help/which-mining-pools-are-supported. Thank you!

Can this be related to the fact that ckpool solo hasn't hit a block in months? I'm honestly a complete noob with miners so I'm just here asking for more info. Thanks.

[citronick]

I was going to send a PM again to ck but thought maybe I'd ask for a community answer to have the opinion of different people, I'm trying to rent a few rigs and gamble a little of my funds on this.

I tried miningrigrentals and I had a miner with a slightly high rejection rate, ck told me it's probably the firmware of the miner and I'm inclined to believe him. I was going to try nicehash now, I used this : https://api.nicehash.com/poolver.jsp

Error: Difficulty too low.
Your pool is shown as incompatible therefore we encourage you to contact pool operator to make sure that the pool is using minimal/starting pool share difficulty which is compatible with our service (and thus compatible with today's miners), please send them following link: https://www.nicehash.com/help/which-mining-pools-are-supported. Thank you!

Can this be related to the fact that ckpool solo hasn't hit a block in months? I'm honestly a complete noob with miners so I'm just here asking for more info. Thanks.

You should read the main post on page 1.

====

Configuration:
Just point your miner to: stratum+tcp://solo.ckpool.org:3333 or port 443
Asicminer tube/prisma owners need to point to a special proxy at solo.ckpool.org:3335
If you use an incompatible rental service that refuses to work on port 3333 try port 4334

[chillfactr]

I was going to send a PM again to ck but thought maybe I'd ask for a community answer to have the opinion of different people, I'm trying to rent a few rigs and gamble a little of my funds on this.

I tried miningrigrentals and I had a miner with a slightly high rejection rate, ck told me it's probably the firmware of the miner and I'm inclined to believe him. I was going to try nicehash now, I used this : https://api.nicehash.com/poolver.jsp

Error: Difficulty too low.
Your pool is shown as incompatible therefore we encourage you to contact pool operator to make sure that the pool is using minimal/starting pool share difficulty which is compatible with our service (and thus compatible with today's miners), please send them following link: https://www.nicehash.com/help/which-mining-pools-are-supported. Thank you!

Can this be related to the fact that ckpool solo hasn't hit a block in months? I'm honestly a complete noob with miners so I'm just here asking for more info. Thanks.

You should read the main post on page 1.

====

Configuration:
Just point your miner to: stratum+tcp://solo.ckpool.org:3333 or port 443
Asicminer tube/prisma owners need to point to a special proxy at solo.ckpool.org:3335
If you use an incompatible rental service that refuses to work on port 3333 try port 4334

as citronik said above.   
if you do some reading all the asnwers are here
thank you -ck

the regular address gets blocked due to low diff

but port 4334 working like a charm at 1000000 diff 

[xasmer]

Hello.
I need to point my miner to: stratum+tcp://solo.ckpool.org:3333
Is it correct to write like this in miner (antminer s9): "solo.ckpool.org:3333" without "stratum+tcp://"
Do I need to rewrite all my miners? Now they are working like this "solo.ckpool.org:3333" without "stratum+tcp://"
What is the difference?

[o_solo_miner]

Hello.
I need to point my miner to: stratum+tcp://solo.ckpool.org:3333
Is it correct to write like this in miner (antminer s9): "solo.ckpool.org:3333" without "stratum+tcp://"
Do I need to rewrite all my miners? Now they are working like this "solo.ckpool.org:3333" without "stratum+tcp://"
What is the difference?

stratum+tcp is the difference!
you should use: stratum+tcp://solo.ckpool.org:3333

[xasmer]

But what is the difference?

Hello.
I need to point my miner to: stratum+tcp://solo.ckpool.org:3333
Is it correct to write like this in miner (antminer s9): "solo.ckpool.org:3333" without "stratum+tcp://"
Do I need to rewrite all my miners? Now they are working like this "solo.ckpool.org:3333" without "stratum+tcp://"
What is the difference?

stratum+tcp is the difference!
you should use: stratum+tcp://solo.ckpool.org:3333

[gOCe]

Well in strict sense you need to CONNECT at:
stratum+tcp://solo.ckpool.org:3333

What you TYPE depends on your firmware.

You can type any of this 4:

stratum+tcp://solo.ckpool.org:3333
solo.ckpool.org:3333
stratum+tcp://solo.ckpool.org:3333#xnsub
solo.ckpool.org:3333#xnsub

the thing is you cant CONNECT whitout stratum+tcp://
BUT most of the firmwares just add it for you (check on the miner status and you see is already there)

And the most important thing is the status "Alive" in "Miner Status"

But what is the difference?

Hello.
I need to point my miner to: stratum+tcp://solo.ckpool.org:3333
Is it correct to write like this in miner (antminer s9): "solo.ckpool.org:3333" without "stratum+tcp://"
Do I need to rewrite all my miners? Now they are working like this "solo.ckpool.org:3333" without "stratum+tcp://"
What is the difference?

stratum+tcp is the difference!
you should use: stratum+tcp://solo.ckpool.org:3333

[Bitcguru77]

And this is correct for european miners, right?

stratum+tcp://de.ckpool.org:3333

BR.
Steff

[gOCe]

Yes

stratum+tcp://de.ckpool.org:3333
stratum+tcp://de.ckpool.org:3333#xnsub

Any of this must work.

And this is correct for european miners, right?

stratum+tcp://de.ckpool.org:3333

BR.
Steff

[gOCe]

But also if you want check the real latency.

To check how close nodes are to you, you need to use a tcp ping program, since some of the nodes you can't use a standard ping.

On windows, check here for psping that will do a tcp ping: Microsoft psping https://docs.microsoft.com/en-us/sysinternals/downloads/psping
e.g. psping -4 -n 10 de.ckpool.org:3333
      psping -4 -n 10 solo.ckpool.org:3333

Yes

stratum+tcp://de.ckpool.org:3333
stratum+tcp://de.ckpool.org:3333#xnsub

Any of this must work.

And this is correct for european miners, right?

stratum+tcp://de.ckpool.org:3333

BR.
Steff

[Bitcguru77]

But also if you want check the real latency.

To check how close nodes are to you, you need to use a tcp ping program, since some of the nodes you can't use a standard ping.

On windows, check here for psping that will do a tcp ping: Microsoft psping https://docs.microsoft.com/en-us/sysinternals/downloads/psping
e.g. psping -4 -n 10 de.ckpool.org:3333
      psping -4 -n 10 solo.ckpool.org:3333

Yes

stratum+tcp://de.ckpool.org:3333
stratum+tcp://de.ckpool.org:3333#xnsub

Any of this must work.

And this is correct for european miners, right?

stratum+tcp://de.ckpool.org:3333

BR.
Steff

Hi.

Thanks for the info.

BR.
Steff

[tfroehlichiii]

Hello Everyone!
   I have been looking around and can't seem to find a solid answer to this. What message will cgminer present if I discover a block? I'm sorry if this has already been answered, I just can't seem to find the answer on here. I know ck will post in this forum when someone gets a block and of course I would just keep my eye on my BTC wallet, but I was just curious what would be presented in cgminer.

   Sorry for the super noob question, I'm just happy to be here and to be a part of this. 

Thank you so much!

[Lafu]

Hello Everyone!
   I have been looking around and can't seem to find a solid answer to this. What message will cgminer present if I discover a block? I'm sorry if this has already been answered, I just can't seem to find the answer on here. I know ck will post in this forum when someone gets a block and of course I would just keep my eye on my BTC wallet, but I was just curious what would be presented in cgminer.

   Sorry for the super noob question, I'm just happy to be here and to be a part of this.  

Thank you so much!

It would looks like this !



Source :  Google Link

[tfroehlichiii]

Hello Everyone!
   I have been looking around and can't seem to find a solid answer to this. What message will cgminer present if I discover a block? I'm sorry if this has already been answered, I just can't seem to find the answer on here. I know ck will post in this forum when someone gets a block and of course I would just keep my eye on my BTC wallet, but I was just curious what would be presented in cgminer.

   Sorry for the super noob question, I'm just happy to be here and to be a part of this.  

Thank you so much!

It would looks like this !

https://up.picr.de/34969901ak.png

Source :  Google %3Ftopic%3D384345.0&docid=8apNLbRRjqyHeM&tbnid=2MUtBtJq_n7Y1M%3A&vet=1&w=639&h=301&itg=1&source=sh%2Fx%2Fim]Link

Bitcguru77, thank you so much for shining some light on this along with providing an example image.

Much appreciated!