MyRig
Donator
Hero Member
Offline
Activity: 792
Merit: 510
support@myrig.com
|
|
October 05, 2014, 03:27:35 PM |
|
only for s4. Please wait for s3 and s2 update. these software is ok for s3 or onoly s4?
|
Antminer & DragonMint Repair E-mail: support@myrig.com T: @MyRig_com Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
|
|
|
GWilkiejr
Member
Offline
Activity: 60
Merit: 10
|
|
October 05, 2014, 05:43:46 PM |
|
Ok - this is the worst batch of product I have ever gotten from Bitmain. What is going on?? So far I have had 3 units with bad PSU's. (One of them almost caught on fire) All of my settings are factory stock. NO overclocking. One of the units has the amber "alarm" light on the PSU blinking and one unit has what appears to be asci code on the LCD. So of 33 units purchased 5 are down. That's 15 % of my units not running within a few days of implementation. Bitmain I hope you're reading this and thinking of a resolution......
|
|
|
|
GWilkiejr
Member
Offline
Activity: 60
Merit: 10
|
|
October 05, 2014, 05:44:52 PM |
|
Oh yea... and one more thing... When I go to flash the S4 Firmware I get this: "tar: invalid magic tar: short read cp: can't stat '*': No such file or directory" What is the deal?
|
|
|
|
StormTheFront
|
|
October 05, 2014, 06:07:26 PM |
|
Oh yea... and one more thing... When I go to flash the S4 Firmware I get this: "tar: invalid magic tar: short read cp: can't stat '*': No such file or directory" What is the deal? Might be a reading thing This link has only been posted about a dozen times in the past day in this thread. https://dl.dropboxusercontent.com/u/24462711/initramfs.bin.SD-20141003-1.tar.gz5 of 33 units not functioning is no laughing matter, but if you missed that link easily enough then maybe you should RTFM and see if you are doing something wrong Contact the user BitmainWarranty via PM, and try calling their support line too. They will help you. Can't help but imagine you must be doing something terribly wrong to get those results. Still not sure how you missed nearly 3 pages of instruction in this thread regarding the firmware upgrade.
|
|
|
|
IYFTech
|
|
October 05, 2014, 08:32:25 PM |
|
P2pool works. Pools were selected from http://p2pool-nodes.info/If there is a specific pool, you want a try, please let me know! Replied questions:
1. S4 is compatible with p2pool? Yes
Can anyone confirm this? Anyone tried? A screen of an S4 connected to a local node for one minute is hardly proof that it "works" - it's just proof that it's connected. You said the S2 "works" with p2pool also - but it doesn't, not efficiently anyway. Can you post some stats please? Better still, point one at my node for 10 minutes & we can see for sure: stratum+tcp://iyftech.zapto.org:9332 Thanks.
|
|
|
|
manitu
Newbie
Offline
Activity: 22
Merit: 0
|
|
October 05, 2014, 08:48:51 PM |
|
|
|
|
|
ChuckBuck
|
|
October 05, 2014, 08:55:13 PM |
|
Wow was so tempted to get at least 1 or 2 units of the S4 just for the heck of it, but looks like I dodged a bullet with Batch 1.
I'm sure Bitmain will iron out these QA issues by either next batch or batch 3 or 4.
|
|
|
|
MyRig
Donator
Hero Member
Offline
Activity: 792
Merit: 510
support@myrig.com
|
|
October 05, 2014, 10:10:52 PM |
|
@IYFTech One of the techs will try to connect to your pool for 10 minutes shortly. P2pool works. Pools were selected from http://p2pool-nodes.info/If there is a specific pool, you want a try, please let me know! A screen of an S4 connected to a local node for one minute is hardly proof that it "works" - it's just proof that it's connected. You said the S2 "works" with p2pool also - but it doesn't, not efficiently anyway. Can you post some stats please? Better still, point one at my node for 10 minutes & we can see for sure: stratum+tcp://iyftech.zapto.org:9332 Thanks.
|
Antminer & DragonMint Repair E-mail: support@myrig.com T: @MyRig_com Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
|
|
|
IYFTech
|
|
October 05, 2014, 10:17:21 PM |
|
Look forward to seeing the results
|
|
|
|
abshnasko
Newbie
Offline
Activity: 29
Merit: 0
|
|
October 05, 2014, 10:26:10 PM |
|
My antminer s4 is also not working on eligius or ghash, but it's reporting in its own control panel that it's mining at 2000+ gh/s. What is the deal?
|
|
|
|
MyRig
Donator
Hero Member
Offline
Activity: 792
Merit: 510
support@myrig.com
|
|
October 05, 2014, 10:34:57 PM Last edit: October 06, 2014, 12:09:26 AM by BitmainWarranty |
|
Ghash and Eligius pool computability issues are being looked at and worked by the engineers at the moment. Mean time, there is an updated firmware for S4. Just to keep all of you guys safer, the e-mailed version's MD5 is... MD5: 506A7AEACC0FF853A351AC3B20ABB1AF Can test the MD5 after download by using one of the free software. http://sourceforge.net/projects/quickhash/?source=typ_redirectMean wile, if none of these will resolve your issue, please open an account at BTCGUILD.COM and tempoary hash there to avoid any lost mining time. Engineers are working to resolve the issues. Thank you! My antminer s4 is also not working on eligius or ghash, but it's reporting in its own control panel that it's mining at 2000+ gh/s. What is the deal?
|
Antminer & DragonMint Repair E-mail: support@myrig.com T: @MyRig_com Return Address: MyRig 3700 Quebec Street, Unit 100-239, Denver, Colorado 80207, USA
|
|
|
StormTheFront
|
|
October 05, 2014, 10:43:28 PM |
|
My antminer s4 is also not working on eligius or ghash, but it's reporting in its own control panel that it's mining at 2000+ gh/s. What is the deal?
Use BTCguild for best results I am finding. Ghash works too. Whatever pool that you choose, be sure to set difficulty manually to 2048
|
|
|
|
abshnasko
Newbie
Offline
Activity: 29
Merit: 0
|
|
October 05, 2014, 11:06:00 PM |
|
I don't see anywhere in eligius where to set this. Can I set it on cgminer?
|
|
|
|
abshnasko
Newbie
Offline
Activity: 29
Merit: 0
|
|
October 05, 2014, 11:15:01 PM |
|
Well, I figured out at least one problem: my S4 was configured totally wrong from the factory. It looks like the firmware was re-used from an S2 machine or something: in /config/asic-freq.config: option 'freq_value' '0781' #200M option 'chip_freq' '200' option 'timeout' '80'
This is not even remotely correct. 0781 isn't a valid value for anything according to the S4 manual, and the timeout is way too high. The manual says for 200MHz, timeout should be 20ms. So I changed it to: option 'freq_value' '0782' #200M option 'chip_freq' '200' option 'timeout' '20'
Then rebooted the S4, and now my Diff1 on Eligius climbed from 256 to 512, to 1.02k, and my hashrate is climbing as well. After 2 minutes, it's now above 1.2TH/s when it used to show only like 50Gh/s. I'll update in a few hours on the status, but things are looking much better.
|
|
|
|
StormTheFront
|
|
October 06, 2014, 12:03:25 AM |
|
I don't see anywhere in eligius where to set this. Can I set it on cgminer?
You have to set it at the pool, BTCguild and Ghash have the option for sure. Looks like you may have nailed it though Hopefully with that information Bitmain can push another firmware relatively quickly
|
|
|
|
abshnasko
Newbie
Offline
Activity: 29
Merit: 0
|
|
October 06, 2014, 12:28:25 AM |
|
Possibly. An hour later, I'm only getting about 1.25TH/s
|
|
|
|
IYFTech
|
|
October 06, 2014, 12:45:52 AM |
|
Look forward to seeing the results And here they are: My DOA/Reject rate instantly climbed from less than 2% to over 18% with the addition of your S4 before you switched it off prematurely It would have been a more accurate test of your S4 with p2pool if you had kept it running for the full 10 minutes - but as we can clearly see by the graph, the S4 does not work efficiently with p2pool, as you wrongly stated earlier with your 1 minute screen. It also didn't get anywhere near 2Th. I was under the impression that Bitmain was doing some major development with their hardware & it's problem with p2pool - but this miner seems to be a bigger version of the poorly performing S2 with p2pool I'm afraid. Can you tell me what settings you were using in cgminer? IYF.
|
|
|
|
abshnasko
Newbie
Offline
Activity: 29
Merit: 0
|
|
October 06, 2014, 01:02:15 AM |
|
I just switched from eligius to ghash.io and set the difficulty to 4096, and I'm getting 1.85TH/s pool-side. Closest I've gotten yet.
|
|
|
|
greaterninja
|
|
October 06, 2014, 01:13:14 AM |
|
I've tried updating the firmware on the S4 and I get a SD directory omitting error.
S4 is not hashing correctly with elgius, so I moved back to ghash.io and set worker difficulty to 2048.
Hashrate at the pool fluctuates between 1.85 and 2.05 Th/s in the last 24 hours. Noticing ghash keeps redirecting me to uk1 and uk2...will test with us servers.
|
|
|
|
PatMan
|
|
October 06, 2014, 01:16:37 AM |
|
Look forward to seeing the results And here they are: My DOA/Reject rate instantly climbed from less than 2% to over 18% with the addition of your S4 before you switched it off prematurely It would have been a more accurate test of your S4 with p2pool if you had kept it running for the full 10 minutes - but as we can clearly see by the graph, the S4 does not work efficiently with p2pool, as you wrongly stated earlier with your 1 minute screen. It also didn't get anywhere near 2Th. I was under the impression that Bitmain was doing some major development with their hardware & it's problem with p2pool - but this miner seems to be a bigger version of the poorly performing S2 with p2pool I'm afraid. Can you tell me what settings you were using in cgminer? IYF. Replied questions:
1. S4 is compatible with p2pool? Yes
2. When do we release the latest firmware? Engineers have released one version of firmware merged cgminer 4.6.1 today, which is now being tested. And we will upload it to bitmaintech.com when it is tested running stably. Please PM us if you have any request about current verson firmware.
3. how to upgrade latest firmware to S2? Now the latest firmware for S3 and S4 is ready to be released soon, that one for S2 is being developed. Stay tuned here.
So, in reality: 1. S4 is compatible with p2pool? NO2. When do we release the latest firmware? Engineers have released one version of firmware merged cgminer 4.6.1 today, which is now being tested. And we will upload it to bitmaintech.com without testing it at all to make sure it works & is flashable.3. how to upgrade latest firmware to S2? 7 weeks ago we said in 2 weeks. So in in 2 weeks.
|
|
|
|
|