|
my problem is not your a thief and steal someone's code , i hope your not my problem is the FEE I wish you would give us a some way to pay to unlock it instead you say if i don't like it don't use it ,my repose back is I have to if I want to mine and use windows sense i don't write code and not to good at it. or I would write my own and wouldn't use your miner and as it stands once there is a working version of silent army for windows, i won't use it , right now i have to . I don't hate you, we all have to make a living some way or another . i hope you understand why i feel like i do and why . I'm sure you will ignore this because you don't care .
thanks top .
|
|
|
|
|
Don't know if this helps but if you use after burner see if boost is on in after burner . not sure if 280x have that my 280 not X does and having it on lower speeds on mine but it's only one card and 280 not the X and disable ULPS
my 280 not X
one card with boost off and disabled ULPS . no over clocking.
ZEC - Total Speed: 47.000 H/s, Total Shares: 3174, Rejected: 17, Time: 09:31
|
|
|
|
V3 was running fine. After compile V4 (and some other tests) i get this:
edwin@edwin-ubuntu:~/silentarmy$ ./silentarmy
Connecting to us1-zcash.flypool.org:3333
Solver 0.0: unexpected banner "/home/edwin/silentarmy/sa-solver: /usr/local/cuda-8.0/targets/x86_64-linux/lib/libOpenCL.so.1: no version information available (required by /home/edwin/silentarmy/sa-solver)"
Solver 0.1: unexpected banner "/home/edwin/silentarmy/sa-solver: /usr/local/cuda-8.0/targets/x86_64-linux/lib/libOpenCL.so.1: no version information available (required by /home/edwin/silentarmy/sa-solver)"
Stratum server sent us the first job
Mining on 1 device
pipe closed by peer or os.write(pipe, data) raised exception.
pipe closed by peer or os.write(pipe, data) raised exception.
pipe closed by peer or os.write(pipe, data) raised exception.
Can anyone help?
what version of Ubuntu ? and how long ago did you install that version of v4 of v4 it was last updated 5 hour ago according to https://github.com/mbevand/silentarmy/tree/master Latest commit 5228f1d 5 hours ago @mbevand mbevand *properly* fix 32-bit compilation warnings or you can get the tag version four which was updated Latest commit 1dc5663 18 hours ago @mbevand mbevand release v4 |
|
|
|
|
LIke Cryptozillah said buy the cheapest one and mode, i did and it works just as good as the one that cost 20 bucks more only diffidence I saw was two or 3 fans over one and one bios not two that's with any 470 or 480 card till the 490 comes out then it changes some.
|
|
|
|
Is this a stand-alone miner, or does it need a Pi / PC with BFGMiner?
How are these miners controlled?
Even with Bitmain's release of the latest S9 batches, I am severely thinking of buying some Avalons,
if it follows how all the other Avalon's work , one PI can control 6 or more, from what they are saying you may be able to chain a lot more to gather. tip there is a internal controller so be very care full with updates you can brick one . and it works on orange PI's now unless they dropped that , me and Avalon had a little falling out over gear i didn't buy direct they pretty much told go me f off unless i had bought it direct or pay very high price to replace some thing that should only cost 30 bucks and they give no support to non direct buys . so i stop keeping up on the Avalon 7 . and CGMMINER only works unless you are willing to send a miner to Luke the DEV of BFG hell make it work or convince Avalon to do it . Avalon did support BFG at one point not sure what happen . |
|
|
|
Took yalls advice and I am now on a fresh install of 14.02. I installed the drivers using sudo apt-get install fglrx I got to the point of "make" and get:
mine@mine:~/silentarmy$ make
gcc -std=gnu99 -pedantic -Wextra -Wall -ggdb -Wno-deprecated-declarations -Wno-overlength-strings -I"/opt/AMDAPPSDK-3.0/include" -c -o main.o main.c
main.c:15:19: fatal error: CL/cl.h: No such file or directory
#include <CL/cl.h>
^
compilation terminated.
make: *** [main.o] Error 1
mine@mine:~/silentarmy$
did you install AMD-APP-SDKInstaller-v3.0.130.136-GA-linux64 then link some thing like this even may or may not need to edit this file CD / root
sudo nano .bashrc
put at the bottom #AMD APP SDK
export AMDAPPSDKROOT=/opt/AMDAPPSD-3.0
export AMDAPPSDKSAMPLESROOT=/opt/AMDAPPSDK3.0/
export LD_LIBRARY_PATH=${AMDAPPSDKROOT}lib/x86_64:${LD_LIBRARY_PATH}
export ATISTREAMSDKROOT=$AMDAPPSDKROOT then use sudo ln -sf /opt/AMDAPPSDK-3.0/include/CL /usr/include
sudo ln -sf /opt/AMDAPPSDK-3.0/lib/x86_64/* /usr/lib then after reboot there may be another problem with the i couldn't figure out in 14 so i tired 15 it works greats . I think that's what they meant by You may need to specify the paths to the locations of your OpenCL C headers and libOpenCL.so if the Makefile does not find them:
$ make OPENCL_HEADERS=/path/here LIBOPENCL=/path/ there is a better way but that worked for me . |
|
|
|
|
if that doesn't work try ubuntu 15.10 i had to use 15 i don't get the speeds they get with ubuntu 16, im guessing its the driver and something about sa-solver is only available in 14 so I'm guessing the same for 15.10 more a driver issue then any thing, if, AMD would give those cards support, those cards can use 16 unless some one figured out a way .
yup it runs the same on 15 as 14 i just tested it with ethOS i think there fglrx version is Ubuntu 14 , same speeds as i get in 15 on my PC using it direct it should being interesting once this is ported to windows to see what speeds they can get with older cards or even 470 and 480 . sense it has the drivers we need to do it in Ubuntu 14 .
|
|
|
|
|
I know that i just had to post it for fun , but I'll bet some will try and waste cash and not because of this post .
I would like to see what it does but I'm not wasting 300 bucks to find out.
|
|
|
|
Hey, would anyone here happen to know why the silent army version of this miner always crashes on my RX 480? The normal version works just fine, but a little slower. I'm using the default settings if that helps. I appreciate any help I can get.  bugs does for every one till either a more stable update is released or SA v5 for windows, comes out then we may not need this updated but it would be cool to see but do understand if not, |
|
|
|
|
i hope it stays that way so what if the price drops what counts is will it last after the smoke clears im buying a few more AMD card at the end of the month, so i hope it works i really don't want to go back to ETH unless a miner is made that dual mines both with the power usage of Zec , which might not be possible but who know some amazing things are done .
|
|
|
|
|
china did invent below , i Miss read some place about the first PC my bad . i admit it. as for that higher power thing no comment .
Printing
Paper
Gunpowder
Compass
and more
|
|
|
|
|
Chinese made the first PC . before him it was a that board thing with beads on it, i forget what they called it back then . most of the stuff we have these day the Chinese invented we cloned it in the western world and made most of it better . i read some place they even invented crypto currencies. to some extent . but china being china like it is now didn't let kind of stuff into the world till years after it was made or invented.
|
|
|
|
oh no! now we got the win-realease of SA3-kernel fast gpu miner for everyone, not only for linux-miner what a pity  adaseb asked for win-build instruction (see the SA-topic 09/29/2016) and nobody helped - you got what you got  and that's bad because some of us are lazy windows user and called that from time to time . we can't have it ? . and never saw were adaseb asked  . I`m not lazy and can compile with the help of MinGV, but who cares Linux only  why so? ask mrbI don't like using Linux but will use if needed, it's not that i'm lazy like others put it I just agree it's a matter of what you like and don't like, i did test Silent army with Ubuntu 16 they did make it super easy to install you can monitor temps fan speed adjust it in Ubuntu 16 now it is much easy to do and there are lots of apps that do it and it is by far faster then Claymore's ZCash Miner and it is funny how Claymore's ZCash Miner came out with in mins after V3 was released or seemed that way . windows 10 made it even easy to use Ubuntu with Ubuntu on windows 10 you don't need MinGV, unless you use other version of windows then go for it and it works well but is only version 14 they are looking into upgrading that to 16 and make moving around between file systems a lot better then it is now . i saw some one in the SA post actually did it with Ubuntu on 10 . Linux only Huh why so? ask mrb who knows maybe that all he uses and use to, like I am with windows and who cares true were getting windows soon I just hope it's not to late . |
|
|
|
|
1x to 16x riser no difference other then how safe each version is i think the highest version out is V6 at the moment and how well built they are and there are some cheap version of V3 which is the most used Version it looks like, V6 if there isn't a higher one is the best built safest one from what ive seen,and cost the same as any of them, i use three of version 6 over V3 and there is no deceases in hash.
|
|
|
|
|
Show Posts
