Hey guys, is dual mining dead? They just ship Baikal Giant-B and all the dual coin profit just drop ~90%
dcr, sia mining is dead, but only one pascal asic atm so pascal is still good for dual mining
|
|
|
Anyone else mining pascalcoin to poliniex ?
I have been mining it for a few days now on nanpool, they send my 1 pascal payouts but nothing arrives on polo
I'm using the correct account and payment id payload
the same problem, the first one has come to yes, next one not sorry what do you mean?
|
|
|
Anyone else mining pascalcoin to poliniex ?
I have been mining it for a few days now on nanpool, they send my 1 pascal payouts but nothing arrives on polo
I'm using the correct account and payment id payload
|
|
|
Fedex is always the best option IMO when ordering from Bitmain. After they marked as shipped I'm pretty much guaranteed to receive the order within 2 days. All of my Fedex orders ship faster than the UPS orders and I'd also like to throw out that I've had 3 orders caught in a warehouse by UPS for over a week. I called UPS and they said that it was happening to THOUSANDS of orders from Bitmain, for some reason they would hold them in warehouse for weeks and then ship them. This is after Bitmain marks as shipped. I was able to get my hands on 2 of the A3's but I am debating about whether or not I want to sell them on eBay or if I want to mine with them. I've sold quite a few miners on eBay with no hassle, I've always put "AS is all warranty will be done through BITMAIN, no seller remorse no returns no refunds accepted" i'm just worried with this one though if someone could actually go through with it. Anyone had a buyer on eBay try to return something because they changed their mind? even though you state no returns or no refunds especially due to buyers remorse?
I wish I knew this before. I read somewhere that UPS is "somewhat" safe with Bitmain for US customers since the shipping price is higher than Fedex and "some" customs fees are priced in and it "may" not get held in customs.. Ordered on 1/18 with UPS and no shipping notification yet... Ive always got dhl orders in 3 days
|
|
|
What's dying is the gaming economy. With this GPU mining craze, Gamers pockets are crying from Overpriced Limited stock GPU. Even NVDia left a note to distributors, "don't sell Graphic Cards to miners but to gamers".
More variety of ASIC, less chances of industrial level of mining to use GPUs. It's a Win-Win for Gamers, Bitmain and Large-scale Miners.
a single rx500 is not making $4 a day where do u get that number from? more likw $2.50 a day max
|
|
|
thats a good price , i might take them off your hands if My A3 is as profitable as they claim
|
|
|
@bubbajo - thanks I ordered one, btw how do you control the fan speed with these since there is no speed knob
That unit isn't adjustable AFAIK. Fan speed would have to be controlled via BIOS I guess? ok ill pass on those
|
|
|
they ship a few days after they confirm address
|
|
|
I'm in the USA and used UPS and still no shipping paid on 2018-01-17 20:07 so I feel cheated others are getting it faster. Yep, my payment was credited one minute after yours, I used UPS also, no tracking number and showing unshipped. Seems like everyone with tracking info used DHL or Fedex. I guess thats good to know in the future. I used DHL like I always do no shipping and mine is before his and yours i think theres no rhyme or reason, but i did get 3 power supplies too
|
|
|
I'm in the USA and used UPS and still no shipping paid on 2018-01-17 20:07 so I feel cheated others are getting it faster. 2018-01-17 15:50:56 is when i paid before you no shipping no tracking fuck me I also ordered 3 PSU though but those should not delay this so lame
|
|
|
how are you controlling case fans on the ONDA 8 gpu board ?
I got two fan header splitters and have 4 140mm maglev fans on the board , actualy i want to do six with splitters eventually
I noticed some of the fans are not spinning at max speed I have two in the back blowing towards to front , and two in front set up as exhaust fans
how do you set the fans to to basically go at max speed or at least 80%
these are PWM fans btw
i just used a 4 channel fan controller powered from a molex. if all you want is 100% they make molex to pwm adapters that should run your fans at 100%, but a quick search shows they are kinda pricey for what you get. https://m.newegg.com/products/9SIACJF64S3550something like that? $15 though kinda pricy , but the cheapest i could find this would allow me to set all the fans to say 80 percent right? yes something along those lines, something with a rotary control to set speed. cant comment on that particular one (the spelling is crazy bad and that doesnt inspire confidence) but thats the idea. set anywhere from off to 100% manually. sounds good thanks https://www.amazon.com/SilverStone-System-Cables-Black-CPF04/dp/B00VNW556I@bubbajo - thanks I ordered one, btw how do you control the fan speed with these since there is no speed knob
|
|
|
how are you controlling case fans on the ONDA 8 gpu board ?
I got two fan header splitters and have 4 140mm maglev fans on the board , actualy i want to do six with splitters eventually
I noticed some of the fans are not spinning at max speed I have two in the back blowing towards to front , and two in front set up as exhaust fans
how do you set the fans to to basically go at max speed or at least 80%
these are PWM fans btw
i just used a 4 channel fan controller powered from a molex. if all you want is 100% they make molex to pwm adapters that should run your fans at 100%, but a quick search shows they are kinda pricey for what you get. https://m.newegg.com/products/9SIACJF64S3550something like that? $15 though kinda pricy , but the cheapest i could find this would allow me to set all the fans to say 80 percent right? yes something along those lines, something with a rotary control to set speed. cant comment on that particular one (the spelling is crazy bad and that doesnt inspire confidence) but thats the idea. set anywhere from off to 100% manually. sounds good thanks
|
|
|
did you read the guide, it says first set up the board and bios, then install windows i just went and plugged all in and then set up windows and was ok
windows is the best os for rigs, I got 30
|
|
|
lol same smh , i need the money most too to help with my kitchen remodel /cry
|
|
|
not to burst anyones bubble but... WHAT WILL THE ANTMINER A3 REALLY PRODUCE? In short, if Bitmain does produce 100,000 Antminer A3s, each Antminer A3 would mine 1 / 100,000 of the daily block reward. As 100,000 Antminer A3s would yield a new global Siacoin hash rate of 815 PH/s, or 815,000 TH/s – about 1600x the current hash rate – it makes the entire current hash rate effectively negligible. Therefore, using some quick, back-of-the-envelope math: The current daily block reward is ~$159,000 worth of Sia coin (just set your hashrate = global hashrate on any linear calculator of your choice). Given the above, this implies that if Bitmain sells 100,000 Antminer A3s, each one will net $1.59 per day. 50,000 units sold would yield $3.18 per day. 10,000 units would yield $15.90 per day, which puts it in line with Bitcoin and Litecoin’s recent daily profitability. Unless of course, the price of Siacoin dramatically appreciates… http://theminersunion.com/2018/01/17/obelisk-tech-clients-breathe-sia-of-exasperation-as-bitmain-releases-a3s/100k units in 2 days? even bitmain cant produce that much gear i think its established that that batch was. no more than 8 to 20k units
|
|
|
how are you controlling case fans on the ONDA 8 gpu board ?
I got two fan header splitters and have 4 140mm maglev fans on the board , actualy i want to do six with splitters eventually
I noticed some of the fans are not spinning at max speed I have two in the back blowing towards to front , and two in front set up as exhaust fans
how do you set the fans to to basically go at max speed or at least 80%
these are PWM fans btw
i just used a 4 channel fan controller powered from a molex. if all you want is 100% they make molex to pwm adapters that should run your fans at 100%, but a quick search shows they are kinda pricey for what you get. https://m.newegg.com/products/9SIACJF64S3550something like that? $15 though kinda pricy , but the cheapest i could find this would allow me to set all the fans to say 80 percent right?
|
|
|
Here is quotes from Sia Discord "Price explosion Look at all coins before and after asics Ltc-$4 asic 200+ Dash $200- asic dash$800 Btc300 asic btc-13,000 Imagin ether asic"
I think really better buy sia now, and sold it after 1-2 week, than buy A3
you cant buy an A3 anyways, point is moot lol
|
|
|
how are you controlling case fans on the ONDA 8 gpu board ?
I got two fan header splitters and have 4 140mm maglev fans on the board , actualy i want to do six with splitters eventually
I noticed some of the fans are not spinning at max speed I have two in the back blowing towards to front , and two in front set up as exhaust fans
how do you set the fans to to basically go at max speed or at least 80%
these are PWM fans btw
|
|
|
is that form even legit ?
|
|
|
|