I've encountered some issues with running the ASIC miner inside the box. Even with a few adjustments, the temperature is around 45°C, the chips temperature is reaching 80°C, and the max hash rate is limited to 45TH. In comparison, I can achieve 75TH in high-performance mode when the ASIC is outside the box. Unfortunately, the noise has become an issue, and it's audible from a few houses away at night.To deal with the noise I get heat problem, I'm considering adding an inline fan on the input side of the box,If anyone has experience or suggestions on this, I'd greatly appreciate it.
I don't think it would work to reduce the temp but I think if you can put an exhaust fan on the end of the duct hose it would help to exhaust hot air out compared to adding a fan on the box but you can try and let see if it would help to reduce the miner temp. |
|
|
|
Find the IP and what device the scammer used I think it's useless because the scammer is always using a VPN only a dumb scammer will let you know the IP and device he uses. Another thing is the guide seems came from this link below. - https://gadgetstouse.com/blog/2023/05/23/find-scammer-location-ip-address/However, you can still use the IP even if he uses a VPN if you get help from some professional who knows more about tracking they can find what scammer use and request IP logs from the VPN provider. |
|
|
|
I feel lucky that I found the owner of the address and he seems like good person and very reputable on this forum  It seems this person rat03gopoh has not replied yet here if he did send BTC back to you. He just recently online 3 hours ago and I believe he will send your BTC soon. You are lucky that it is one of our fellow forum members but if not you won't be able to get your coins back. Next time triple check the copied/pasted address before sending BTC I experience this sometimes that's why I always check multiple times to make sure it will be sent to the right person. |
|
|
|
I have once backed up my phrase key in an online notepad platform called Evernote. I have used it for a couple of months and after some time my wallet was hacked. Some kind of script or something was implemented in my wallet. Every time I try to deposit any native token like ETH, BNB or BTC, they were automatically sent out to a specific wallet address that belongs to the hacker. After that I have done my research and found out that it is highly risky to keep any backup online.
That's pretty bad for storing sensitive keys any online site or 3rd party password manager always has risk and is vulnerable to any attacks. I've used Evernote before for SEO purposes but not for storing any passwords or keys it makes your notes public or I think the owner of Evernote reads them. The best storage for saving your seed backup or private keys digitally is by saving them into an offline device like old phones, encrypted USB flash drive or CD/DVD is also good storage if you want to save your keys for a long-term. |
|
|
|
I hope that you try checking the cable first by switching to another hashboard to confirm if it is just a cable or clean the copper bar with sandpaper as I suggested in my previous post but the sad part you end up sending it for repair. Next time do some troubleshooting first before sending it for repair because sending it back for repair had a shipping cost. Anyway, I'd like to give you a link that you can use for troubleshooting in the future and I hope it will be useful in the future if you experience some issues listed from the link below. - https://support.bitmain.com/hc/en-us/articles/4406645619097-Common-Problems-and-Solutions-for-ANTMINER-19-series- |
|
|
|
Are you saying you have fund in coinbase multi-sig vault and you are able to withdraw your fund from that just with entering the 2FA code and email verification? How is that possible? As already said, they no longer supports multi-sig vault.
I feel you are confusing coinbase mutli-signature wallet with their custodial wallet.
No there is no email verification but only an approval link but it asks for 2FA, I'm using their vault and I usually use it to save a few sat before it always requires approval in my Coinbase account I can approve the withdrawal from the vault but it is still pending and it needs a 2nd approval by a co-signer/secondary email I receive an email from Coinbase(as a secondary email) and the email asks for my secondary approval by clicking the approve button the vault funds will be out within 24hours and will transfer to the main wallet. Please check the video I provided above that is how I withdraw funds out from the vault. |
|
|
|
You are right, but recently I noticed the limit is now 2 indicators allowed for free accounts, or is it just for my account? I have been on a paid plan, until it expired recently. I am waiting for the Black Friday deals, so I can subscribe annually.
No, mine also has a limit they only give 2 indicators if you add more it will ask for a subscription. If you want to use it free without a subscription and you have a Binance account you can use the trading view there by changing the chart mode to TradingView it supports more than 2 indicators than waiting for black Friday to subscribe for a 1-year subscription. |
|
|
|
 https://help.coinbase.com/en/coinbase/managing-my-account/other/the-multisig-vaultCoinbase multisig vault is 2 of 3 multi-signature wallet. One of the keys is owned only by the user. One of them is stored by coinbase and the user has no access to that. One of the keys (which is encrypted) is owned by both coinbase and user. If you own two of the keys, you must be able to spend your fund without relying on Coinbase and without any need to 2FA or email verification. It's weird I didn't receive any update about the vault and they never gave me any keys when I set up my vault. My vault was created in 2015 with 2FA and a secondary email they didn't send me any keys for recovery only the primary and secondary email is my backup to recover my vault. This is weird and now they do have vault recovery on Github that asks for Coinbase, shared, and user xpub keys. @OP I don't think it would ask for a password because mine only asks for a 2FA code when withdrawing after entering the 2FA it will ask if you gonna approve the transaction or not and then the 2nd email will receive a link to approve the transaction. Or check this video below how to withdraw from the vault - https://youtu.be/hM4o-TThT28?si=vHRcWP0sL32y_xcb |
|
|
|
I already did that 2 times, hoping what you were suggesting, and every time only 2 boards appeared, 2 & 3. Number 1 is not appearing.
Prior to my first restart, on the GUI, as I saw the hash rate dropping, I checked the boards and number 1 appeared in red with 0 hash. After I restarted the unit the first time, the board #1 did not appear anymore. Only 2 & 3.
It could be, as Dave suggested, that a contact got loose during the transportation, however I am reluctant of opening up the unit as this might void the warranty, so I am waiting for customer support to respond to my messages, and take it from there.
Can you share your miner logs I just want to check the logs if the 1st hashboard is still detected while it's not running properly we can maybe find the issue under the logs and give you some suggestions to try. I guess that the 1st hashboard might had poor contact with the copper bar cleaning it with sandpaper might solve this. |
|
|
|
|
It seems you got an email from a scammer.
Are you sure we talking about Coinbase?
Another thing is why the email from Coinbase said you can only access the vault funds if you have these two keys?
The weird thing is there is no announcement from Coinbase that they are going to terminate Vault Wallet and honestly creating a Vault Wallet does not generate a private key it requires only 2FA and another email as co-signer.
What I guess is you receive an email from a scammer and the scammer might be asking for your backup keys and password.
If they ask then don't send any keys because Coinbae never asks for any sensitive data(like private keys and password).
|
|
|
|
|
I think he talks about the vault wallet from Coinbase and actually, there is no tool that you can use to recover the Coinbase vault.
If your Coinbase account was created in 2016 then to withdraw your funds from the vault is by providing your 2nd email(co-signer).
Based on my experience when I withdraw my funds from the Vault Coinbase emails me on my two emails with a link "Approve withdrawal" You should click approve withdrawal if you want to take your BTC out of the vault.
If you can access your Coinbase account you should be able to withdraw funds from the vault but the problem is if you still have control of your 2nd email?
|
|
|
|
Regarding remote software for monitoring and control, do you have any recommendations for software that allows me to control my ASIC miners? I've been using FMS, but I've encountered limitations with specific commands. I'm considering developing an automation script to schedule mining during high-performance hours and power off during the night. Any insights on which software might work best for this purpose would be greatly appreciated.
I think Awesomeminer supports this unit model but I don't know if it supports schedule/automation for this unit. Another problem is this tool needs a paid subscription so not worth using if you only have one unit. So only the FMS tool that I could recommend if you can't find other commands from the FMS tool there is a list of commands that I know check my post below also check the link for APIs you can maybe able to use them in your unit. - https://bitcointalk.org/index.php?topic=5381842.msg59012568#msg59012568Take note you still need to set up a VPN or SSH tunnel if you want to connect to your home network while you are outside I think TeamViewer is fine if you have an extra PC that you can run 24/7 in your home or only run it when you go outside. |
|
|
|
|
That's bad news for those who use cryptowat.ch I sometimes use this to learn and to test some strategies and their tool is completely free to use and a good alternative for tradingview.
I think there is still another charting tool for free like I think MetaTrader or stay with TradingView(The free service is more than enough to analyze the chart) these two are free to use and a good alternative for cryptowat.ch.
|
|
|
|
|
Armory wallet does not work if your Bitcoin core is pruned it needs to download the whole blockchain to make Armory work and the current blockchain size is not 435GB it's more than 500 GB.
About extracting the private key you can backup the private key by going to wallet properties> backup> export key list.
If you don't want too much hassle then use Electrum wallet you can import private keys from Armory to Electrum wallet.
|
|
|
|
There are some DIY guides to make a soundproof box on YouTube why not follow their guide like the one below or get some idea on how to make a soundproof box. - https://youtu.be/3YTW0PGOYb0?si=6DLsSLISjVLSwwOuAnd about the tool to monitor and configure your miner's fan speed, you can use the FMS tool but the problem is there is no command to turn on and off a miner currently there is no tool that can able to do that. Only the reboot command exists on the FMS tool. About remoting a miner outside your home I think you will need to set up a VPN for this to be able to access it even if you are far from home. |
|
|
|
Have you read my previous post in your previous thread? I suggested to try to use https://iancoleman.io/bip39/ and then download it to run it offline. The tool supports ETH you can paste the seed backup from Mycelium and you should see all private keys of your seed backup that you can use to import to Metamask. |
|
|
|
|
It seems you get information from ChatGPT Bitcoin is not controlled by any authority or any financial institution bitcoin is decentralized and no one controls it.
And why would you compare USDT to Bitcoin they are too different.
USDT is stable, yes and you will never see this to be volatile the same as Bitcoin because it was created as stable as USD.
|
|
|
|
I don't think this one would work I never tested this but you can try it might work. I suggest you to try extracting all private keys from your HD seed backup from your Mycelium Ethereum account to find the exact ETH address you looking for. In order to do that you will need a tool like this link below make sure to change the coins into ETH and then paste the seed backup. - https://iancoleman.io/bip39/(don't forget to run this tool page on an offline device for safety purposes) After you paste scroll to the bottom you will see all ETH addresses from your seed if you can't find it there click more rows or edit it from 20 to 150 or more then use the find in page with your browser and paste the exact address you looking for. Once you find it scroll to the right to get the private key you can use it to import it directly to Metamask. |
|
|
|
|
Show Posts
