Why all caps?
Because it is a head line.
My little screamer, find first the Edit button . After that I will perhaps answer to your question  |
|
|
|
I see 8.9BTC not 6.6BTC.
you are mistaking my post on bitmaintech's hashnet division. they are offering 10th for 6.66btc they opened the cloud contract and the beast miner on the same day. I purchased the cloud contract as the beast will not work for me until winter power rates start in OCT
This is a BTC loan with very small percentage . |
|
|
|
|
AntMiner S5+ Batch 1
SOLD OUT
|
|
|
|
|
Ordered
2x S5+ with shipping to estonia
18.958 BTC
|
|
|
|
It has got the 18 pin blade connector so you will need later hash boards (V1.91) with the 18 as opposed to 16 pin connector. I do not know what the additional 2 pins do, or if they are anything to do with the additional button on the controller board, or if a 16 pin blade can be used with a 18 pin controller? Perhaps someone does???
Rich
You can use new S5 Hash PCB ( 18 pin connector) with S5 Control PCB (16 pin connectors) Need only a 16 pin cable. Picture of my water cooling S5 project 3 x old blade + 1x new 18 pin blade.  Click on the image |
|
|
|
|
TERM OF USE。
AntRouter Terms of Use
AntRouter is a portable router (the “Product”) with the function of digital coin mining, designed, developed and produced by Bitmain Technologies Limited (“Bitmain”). You should read carefully all the materials related to the Product, including but not limited to Terms of Use (the “Terms”), the product instructions before purchasing and using the Service. Once you use the Product, You are deemed to fully understand and recognize the Terms and other materials, to agree and abide by the Terms and the instructions.
1. Product Use
1.1The Product is a plug-and-play portable router, which need to be connected with internet cable and powered on to act as a wireless router.
1.2 The Product is also a Bitcoin mining device, which you just need to login and bind your AntPool account with the Product in accordance with the instructions.
1.3 The Product is also a charger, which need to insert a USB wire in and connected with your cellphone.
1.4 You shall bear all relating costs incurred in the product use, including but not limited to electric bill and internet access fee.
1.5 The internet signal intensity is influenced by wall and furniture layout, indoor air temperature and humidity, electromagnetic environment, the internet connection speed is determined by telecommunication network provided by the telecommunications operators, and the output of Bitcoin is determined by the Bitcoin rules. The internet signal intensity, connection speed and Bitcoin output are estimation based the idealized model, which is not a promise to you.
2. After-Sale Service
2.1 Bitmain warrants for a repairs period of ninety (90) days from the date of sale (“the date of lodgment“) (the "Warranty Period"). Bitmain assumes no liability for aforementioned warranty claims if the claims result solely from your misuse, negligence, improper installation or unauthorized attempt to repair the parts.
2.2 The repair cost, spare parts cost in the after-sale service will be borne by Bitmain. You shall be responsible for the delivery cost for sending and accepting the Product.
2.3 You shall contact Bitmain’s after-sale person, provide the invoice, receipt, and/or other purchasing certificate before enjoying the after-sale service.
3. Data Security
3.1 You shall use the Product with secure device and internet connectivity, and protect your account information. You shall be responsible for the loss caused by your unsafe use of the Product and information leak.
4. Limitation of Warranty and Liability
4.1 To the maximum extent permitted by applicable law, Bitmain disclaims all other warranties and representations, express or implied, including but not limited to any implied warranty of availability, reliability, correctness, completeness, suitability, no virus.
4.2 To the maximum extent permitted by applicable law, Bitmain shall not be responsible for any incidental, indirect, special or consequential damages or claims (including but not limited to any responsibility arising out of personal injury, private information leak, failure to exercise reasonable care, and compensation for damages caused by negligence or any other pecuniary loss).
5. Miscellaneous
5.1 The formation, execution, performance, interpretation and dispute resolution of the Terms shall be governed by the laws of the People’s Republic of China (not including the law of conflict), without respect to its conflict of laws principles.
5.2 Any dispute or controversy related to this agreement or the performance thereof shall be solved firstly by mutual and amiable ne gotiation; if no agreement is reached, the dispute or controversy shall be brought to the people’s court with jurisdiction of the place where Bitmain is located.
5.3 Bitmain's failure to exercise or delay in exercising any right, power or privilege under theTerms shall not operate as a waiver; nor shall any single or partial exercise of any right, power or privilege preclude any other or further exercise thereof.
5.4 If any provision of the Terms is found to be partly or fully invalid or otherwise unenforceable by any reason, the remaining provisions of the Terms remain in full force and effect.
|
|
|
|
Why is it necessary to post your PACMiC scam here ? Before somebody start to buy I recommend you read this forum. https://forum.bitmain.com/?utm_source=hashnestYou're lucky if you can get back the original investment  After purchase, there is no need to complain that you were not warned |
|
|
|
scammer. beware
This is not a scam. You can buy a PACMiC on hashnest right now! Actually there is already 3000 of them sold. compared with purchase S5 hashpower directly from Hashnest. |
|
|
|
Also, your HW error rate looks really high relative to what I see on my S5's, is this a byproduct of the quad blade - perhaps the extended cable lengths? I2C/SPI can be pretty sensitive to cable length...
With Original S5 fans I had a better result. About the same error rate per hour, actually. STILL way high on the error rate. I'm starting to think MarkAz has a point on the long cable lengths. My first water cooled S5 which is in the housing of C1 . C1 pump and the radiator with 3x better fans. One long (15cm) and one standard cable. 16 pin version. 10 day error rate 38  |
|
|
|
the power supplies is 40 usd each have 190 units of 1500 watts if take all the power supplies cost wiil be 6800 not include shipping cost https://www.meanwell-web.com/en/product_info.php?products_id=SE-1500-12this is the prodact sp 20 10 units 300 usd each not include shipping cost sp30 now offered to somebody if he want take can talk abaut them again we use escrow the shipping will pay before You'll pay for shipping without escrow and for miners with escrow. After that, you will not see the money ever again , what you payd for shipping. |
|
|
|
Hey Tupsu, any particular reason you did the 4 blade setup? I have the water cooling kit, but haven't installed it yet, and was wondering whether I would do that or not, wasn't sure if it was worth the hassle on the connectors.
Also, your HW error rate looks really high relative to what I see on my S5's, is this a byproduct of the quad blade - perhaps the extended cable lengths? I2C/SPI can be pretty sensitive to cable length...
The reason was that I sent one Controller to bitmaintech warranty. With Original S5 fans I had a better result.  |
|
|
|
may all be a moot point don't know what will be asking price and shipping price of the big one.
You can now calculate. Shipping weight 13 kg. 12,6 kg is 164.66 USD to estonia. (DHL) |
|
|
|
One cautionary note: I'd swear that Bitmain has disabled support for more than two blades on the more recent S5 firmware. You'll also need to work out the issues associated with the fact that there are THREE hashing boards within each "s5 like" section of the S5+ miner. I have no idea what the S5+ firmware will do if it doesn't come up with all 9 hashing blades, or if some of them are S5 and not S5+ blades. Things could get ugly right quick since the number of chips per hashing board, and string topology is different between the S5 and S5+. While it would be nice to intermix stuff, it might well not be possible at this time (or ever).
Works for me with latest S5 firmware. S5.5   Click on the image to view enlarge picture |
|
|
|
I can offer $500 if OP includes the controller with the half dead cube. The cube by itself is useless.
Titan Controller for 75 usd - I take 2pc  |
|
|
|
You can track his profile on Amazon, he isn't selling them at those prices. In fact someone should buy one from him, file an A-Z Claim and return it so he gets suspended. Ethical? God, no. Does he deserve it? Hell yes.
If a dog has nothing to do, then he licks her own eggs... Nice dogi. Where is yours Amazon sales? |
|
|
|
The biggest APW3-12-1600-B2 manufacturing mistake is too short PCI-E cables.The problem is, even the two side by side placed S5 Miner, not to mention S5 + Click on the image to view enlarge picture
|
|
|
|
DHCP is ok for floating devices, or monile/portable - but having DOES management on a larger LAN for a while, it's a NIGHTMARE when you're trying to figure out what the address for a device that FAILED is. MAC addresses are noticeably longer than IP addresses, it's a ton easier to make a mistake reading them - even if you put a note on each machine with the MAC address.
Also, MAC addresses are sorta random (yes, I know about the "manufacturer number" part) while you can assign an IP address yourself in a logical way, like "by rack/shelf/location on shelf" which makes it TRIVIAL to figure out what the address of a failed unit is even if you didn't remember to put a note on it.
Unless you're shifting stuff around a LOT, thre's no REASON to "change an IP" once you've set it. You set it once, it's THERE.
DHCP on a LAN full of non-shifting devices is for the birds.
Why do you have to worry about "various types of interface" when you set a static IP? That seems to be a totally strawman comment.
It seems like you move hardware around a TON more than any network I've ever dealt with, which would make your environment completely different than what I've worked with. My experience is that DHCP makes things a royal PAIN to deal with, STATIC makes them a ton easier.
I use MAC Adress as worker name. If you want to sell miner, you have anyway switch to DHCP before shipping. |
|
|
|
But as soon as I disconnect the stock fan it starts beeping. What can I do?
Try to update a firmware. Here at my work an S5 was running with no fans connected to the I/O board at all (2 fans were connected over MOLEX to 3pin adapters directly to PSU). Last software does not have this capability. Fan1 must be connected. |
|
|
|
|
Show Posts
