tell me the total price including shipping in BTC for Italy code 96014
0.535 BTC with shipping www.omniva.ee
|
|
|
is ok, I'm interested, I'll take what method you want to be paid? ognasty? paypal,?. I ask you peche and my first time that I buy with commitment.
Shipping costs to estonia ? Postal code 76609 I need an image of the working miner with one blade.
|
|
|
do not be offended do not know the price for a knife, But I want to trust. as you want to be paid
Are we still talking about the same thing ? S5 hashing board looks like in this picture Click to enlarge
|
|
|
I do not know, it seems a bit expensive price
If it's expensive, you can sell me your working blade with 100USD + shipping.
|
|
|
Antminer S5+
7700 GH/s 9 btc + shipping 0.35 BTC shipping vith DPD
You can buy 2pc with same sgipping costs.
|
|
|
I loaded the newest S5 firmware onto my S5+ controller ( ports 2,3,6,8 counting from the pcie side work with the S5 firmware loaded ) for the first third and attached an S5 controller to each of the other two thirds. Do not forget, some S5/S5+ burning out, for unknown reasons. I used only S5+ software and even with this 3 x S5 blade burned out. No signs of burning but marks for overheating are each blades. One PSU switched off , so it saved the other four blades for overheating . 2 blade from this miner were already in China. This miner was not at my house, because I do not know what exactly happened. Click to enlarge
|
|
|
Have you tried re-flashing the firmware? That is an odd reaction after two days of stable runtime.
Where you can download S7 firmware?
|
|
|
With 16 or 18 pin data cable connections ?
|
|
|
Has anyone else had an extremely hard time with bitmain support and their s5+? I received my S5+ with a defective hash card, temp was ambient and it was not hashing. Email bitmain support they give me a prepaid UPS label and i ship it back to them. A MONTH later i get my hash card back (same serial) so they did a repair and 2 weeks later it stopped hashing again. So again i email bitmain and now they say i have to pay for shipping back to them and be without a hash card for another month and they refuse to cross ship me a new hashboard ( by this i mean send me a new one and i send the old one back at the same time) I have gonna buy 10 S7's but after this i have little confidence in the company. Yes. From my 3 x S5+ at the moment 6 board are in china or in journey to China or back. At first, bitmain refused send UPS shipping label to DOA arrived S5+ . So I paid 120 euro for 2 x shipping. After that I got two blades, which from one had already come out the radiator. I got shipping label from bitmain , to send it back and yesterday I sent another 4 blades to china. I paid a total of more than 200 euro from shipping S5+ blades. Total've sent 6 blades from DOA arrived miner. Naturally, it affected my S7 purchases. Instead 20x S7 , I bought only four. Even though two of them have not yet been sent, because I paid with USD. See also this http://www.cybtc.com/article-1921-1.html
|
|
|
Shipping costs R1 with 1 USD adapter - 42.94 USD Shipping costs R1 without 1 USD Adapter - 21.47 USD
Shipping costs for 10x R1 - 63.77 USD Shipping costs for 10x R1 with adapter - 127.34 USD
Very expensive Power Adapter for 1 USD.
|
|
|
Ill be buying one today as well. More so for the novelty aspect but I am still excited haha But what I dont like is that the shipping costs more than the router itself -___-
annnnd the US plug adapter is sold out
Shipping costs R1 with 1 USD adapter - 42.94 USD Shipping costs R1 without 1 USD Adapter - 21.47 USD Shipping costs for 10x R1 - 63.77 USD Shipping costs for 10x R1 with adapter - 127.34 USD Very expensive Power Adapter for 1 USD.
|
|
|
S7 blade accurate measurements
The length 209 mm ( 139 mm 70 mm ) The height 148 mm ( 125 mm 23 mm )
|
|
|
***Sorry guys I posted this in the S+ thread instead of here.***
Just received my new beaglebone ... i'm having 4 green light and 1 red on the daughter board .. still no power on the beaglebone ...
anyone has a troubleshoot HOWTO on the daughter board ?
Hard to believe I have receive a DNA from Bitmain :/ (I'm pretty sure the BBB is good)
How much you paid for BBB with shipping ?
|
|
|
I offer 100 USD for working S5 board shipped to Florida, I also need the screws with springs for board, nothing else.
|
|
|
S7 Hashnest Price: 8.0705 BTC 4860 GHs
S7 Batch 3 from bitmaintech Price: 6.971 BTC 4860 GHs
Each S7 buyer has already lost 1-1,5 BTC before S7 starts to mine in hashnest.
|
|
|
Do you have any experience running 4 stock fan on a single S5 BBB/Base plate? I'm thinking of making a 2x S5 and i'm worried 4 Stock fan running at full speed might burn the BBB if it can't support that much power?
Your input would be appreciated.
It is tested with S7 base plate with 6 fan connectors. 4 Stock fan. S5 base plate has only 2 fan connectors. But the S7 has a dedicated connector just to itself for power? Only 2 fan connector isint an issue i would use a Y splitter. I am just wondering whether the board can safely supply the power or not. The answer is - not safely, not long time.
|
|
|
I see the difference on controller on PCI-e going up. Does the "new" one have 9 slots for blades still I could not tell from picture looks like still nine i'm estimating after looking at it again..
Is there more details as far as the housing? I guess I would love to see side by sides if anyone happens to have both.
2 picture says more than 100 dogs bark Click to enlargeClick to enlarge"New" S5+ and "New" S7
|
|
|
Hi guys! Does anyone know what is the model of the adhesive thermal paste Bitmain use to stick the heatsinks? I want to see if the heatsinks are dropping because of the heat. Bitmain states that the miners can work in ambient temperatures of up to 40 ºC and the highest temp they might have had is 28 ºC (room temp), and still, I found 4 boards with heatsinks dropped…
Do not fix it yourself. Send it back to bitmain.
|
|
|
|