leozzo
Newbie
Offline
Activity: 53
Merit: 0
|
|
June 14, 2016, 01:48:18 PM |
|
Hi all guys,
is there any command to automatically import another previsius saved strategy after XXX bet?
If you use any strategy after some thousand bet you will loose anyway, so i think it's necessary switch it after a bit and again Thank you
Just to be clear, if you play long enough, you're going to lose no matter how advanced your system is or how many systems you use or whatever. You can load and execute advanced mode settings from the programmer mode, so you can write a script that loads new settings and uses it to place bets, or you van use the executefile() or loadfile() function (I can't remember the exact function, check out this video where I use it) to load new programmer mode scripts while betting. There's no setting for the advanced mode that allows you to load new settings after x amount of bets or something. And No, I'm not going to add the feature any time soon Ok, all clear. Thank you for support
|
|
|
|
|
megalox
Member
Offline
Activity: 99
Merit: 10
|
|
June 15, 2016, 11:31:29 AM |
|
so anyone could help me with my betting sequence?
is that possible to make it?
This seems to work. Change the top 4 variables as you like Let me know if there are any issues & how your system works out for you chance=90 multi=10 minbet=0.0000001 minhigh=0.0001
nextbet=minbet rawr=minhigh highbet=false fl=false
function dobet()
if win then fl=true end
if highbet and !win then rawr=rawr*multi highbet=false fl=false end
if highbet and win then rawr=minhigh highbet=false fl=false end
nextbet=minbet
if !win and fl then nextbet=rawr highbet=true fl=false end
end anyone can help me with this script? instead of after 1 loss pre roll, i need i want it 2 or 3 loss streaks before placing bet...so it can adjusted thanks
|
|
|
|
chilly2k (OP)
Legendary
Offline
Activity: 1007
Merit: 1000
|
|
June 15, 2016, 12:46:09 PM |
|
so anyone could help me with my betting sequence?
is that possible to make it?
This seems to work. Change the top 4 variables as you like Let me know if there are any issues & how your system works out for you chance=90 multi=10 minbet=0.0000001 minhigh=0.0001
nextbet=minbet rawr=minhigh highbet=false fl=false
function dobet()
if win then fl=true end
if highbet and !win then rawr=rawr*multi highbet=false fl=false end
if highbet and win then rawr=minhigh highbet=false fl=false end
nextbet=minbet
if !win and fl then nextbet=rawr highbet=true fl=false end
end anyone can help me with this script? instead of after 1 loss pre roll, i need i want it 2 or 3 loss streaks before placing bet...so it can adjusted thanks There is a variable provided called currentstreak. The trick to using it for loses, is realizing it's a negative number for loses. So you could change the code like this. chance=90 multi=10 minbet=0.0000001 minhigh=0.0001 losecount = -2 -- change this to -3 or whatever you want for the lose streak.
nextbet=minbet rawr=minhigh highbet=false fl=false
function dobet()
if win then fl=true end
if highbet and !win then rawr=rawr*multi highbet=false fl=false end
if highbet and win then rawr=minhigh highbet=false fl=false end
nextbet=minbet
if !win and fl and (currentstreak == losecount) then nextbet=rawr highbet=true fl=false end
end
|
|
|
|
megalox
Member
Offline
Activity: 99
Merit: 10
|
|
June 16, 2016, 02:13:50 AM |
|
so anyone could help me with my betting sequence?
is that possible to make it?
This seems to work. Change the top 4 variables as you like Let me know if there are any issues & how your system works out for you chance=90 multi=10 minbet=0.0000001 minhigh=0.0001
nextbet=minbet rawr=minhigh highbet=false fl=false
function dobet()
if win then fl=true end
if highbet and !win then rawr=rawr*multi highbet=false fl=false end
if highbet and win then rawr=minhigh highbet=false fl=false end
nextbet=minbet
if !win and fl then nextbet=rawr highbet=true fl=false end
end anyone can help me with this script? instead of after 1 loss pre roll, i need i want it 2 or 3 loss streaks before placing bet...so it can adjusted thanks There is a variable provided called currentstreak. The trick to using it for loses, is realizing it's a negative number for loses. So you could change the code like this. chance=90 multi=10 minbet=0.0000001 minhigh=0.0001 losecount = -2 -- change this to -3 or whatever you want for the lose streak.
nextbet=minbet rawr=minhigh highbet=false fl=false
function dobet()
if win then fl=true end
if highbet and !win then rawr=rawr*multi highbet=false fl=false end
if highbet and win then rawr=minhigh highbet=false fl=false end
nextbet=minbet
if !win and fl and (currentstreak == losecount) then nextbet=rawr highbet=true fl=false end
end it gave me first 2 lost, not the streaks.. if i set lostcount = -2 it just starting script after 2 lost...what i mean is preroll for 2 lossstreak then start the script/ strategy like lose,lose then start, repeat if lose thanks
|
|
|
|
chilly2k (OP)
Legendary
Offline
Activity: 1007
Merit: 1000
|
|
June 16, 2016, 03:30:05 AM |
|
it gave me first 2 lost, not the streaks..
if i set lostcount = -2 it just starting script after 2 lost...what i mean is preroll for 2 lossstreak then start the script/ strategy
like lose,lose then start, repeat if lose
thanks
I'm not understanding. What is the difference between starting the script after 2 losses and pre-rolling for a 2 loss steak and then starting? after reading your comment for the 10th time I think it sunk in. Your saying the betting starts after 2 losses, not necessarily in a row. Based on the code I gave you it shouldn't start until you have 2 losses in a row. The variable currentstreak is for streaks. If you lose it gets set to -1 if you then win it will be 1 if you lose again it's -1. It won't be -2 until you have 2 losses in a row. I didn't write the original script so sometimes it's hard to understand what someone else was trying to do. It looks like the script needs to have one win, and then a loss to start betting. Then after a loss it increases the bet and waits for another loss before betting higher. I copied the code in the last code segment and it seems to do what your asking for. Keep betting the min bet until you get a 2 loss streak and then do the high bet.
|
|
|
|
megalox
Member
Offline
Activity: 99
Merit: 10
|
|
June 17, 2016, 01:49:34 AM |
|
chance=90 multi=10 minbet=0.0000001 minhigh=0.0001 losecount = -2 -- change this to -3 or whatever you want for the lose streak.
nextbet=minbet rawr=minhigh highbet=false fl=false
function dobet()
if win then fl=true end
if highbet and !win then rawr=rawr*multi highbet=false fl=false end
if highbet and win then rawr=minhigh highbet=false fl=false end
nextbet=minbet
if !win and fl and (currentstreak == losecount) then nextbet=rawr highbet=true fl=false end
end
could you help me to add change chance? like prerolling on chance 90% after currentstreak==losecount it will change the chance and put bet, repeat if loss
exp for 2 streaks loss win,win,loss,win,win,loss,loss,BET (change chance)
thanks
|
|
|
|
chilly2k (OP)
Legendary
Offline
Activity: 1007
Merit: 1000
|
|
June 17, 2016, 02:31:21 AM |
|
chance=90 multi=10 minbet=0.0000001 minhigh=0.0001 losecount = -2 -- change this to -3 or whatever you want for the lose streak.
nextbet=minbet rawr=minhigh highbet=false fl=false
function dobet()
chance = 90 -- set default chance
if win then fl=true end
if highbet and !win then rawr=rawr*multi highbet=false fl=false end
if highbet and win then rawr=minhigh highbet=false fl=false end
nextbet=minbet
if !win and fl and (currentstreak == losecount) then <--- This is the block of code that is going to make the high bet nextbet=rawr highbet=true fl=false chance = whatever you want to set it to... end
end
could you help me to add change chance? like prerolling on chance 90% after currentstreak==losecount it will change the chance and put bet, repeat if loss
exp for 2 streaks loss win,win,loss,win,win,loss,loss,BET (change chance)
thanks
I tried running that code, and it was doing the high bet after 2 losses in a row. Anyway.. I've put an update in red above.
|
|
|
|
megalox
Member
Offline
Activity: 99
Merit: 10
|
|
June 17, 2016, 03:00:49 AM |
|
chance=90 multi=10 minbet=0.0000001 minhigh=0.0001 losecount = -2 -- change this to -3 or whatever you want for the lose streak.
nextbet=minbet rawr=minhigh highbet=false fl=false
function dobet()
chance = 90 -- set default chance
if win then fl=true end
if highbet and !win then rawr=rawr*multi highbet=false fl=false end
if highbet and win then rawr=minhigh highbet=false fl=false end
nextbet=minbet
if !win and fl and (currentstreak == losecount) then <--- This is the block of code that is going to make the high bet nextbet=rawr highbet=true fl=false chance = whatever you want to set it to... end
end
could you help me to add change chance? like prerolling on chance 90% after currentstreak==losecount it will change the chance and put bet, repeat if loss
exp for 2 streaks loss win,win,loss,win,win,loss,loss,BET (change chance)
thanks
I tried running that code, and it was doing the high bet after 2 losses in a row. Anyway.. I've put an update in red above. it does work correctly only the direction is not ,,lets say pre roll >90 and when bet occur it should be chance 9.9 with roll result > 90 so its like chasing or looking for 2 rolls number above > 90
|
|
|
|
seVell
Newbie
Offline
Activity: 28
Merit: 0
|
|
June 18, 2016, 02:57:24 PM |
|
https://i.imgur.com/v46urKA.png?1What do you think of this strategy? Instead of just this condition: After 4 losses in a row, change the chance to 66 I'd like to have more conditions to stop the losing streaks like this: After 3 losses in a row, change the chance to 55 After 4 losses in a row, change the chance to 66 After 5 losses in a row, change the chance to 70 and so on... Can I do this in the programmer mode?
|
|
|
|
seuntjie
Legendary
Offline
Activity: 1717
Merit: 1125
|
|
June 23, 2016, 06:19:24 AM |
|
What do you think of this strategy? Instead of just this condition: After 4 losses in a row, change the chance to 66 I'd like to have more conditions to stop the losing streaks like this: After 3 losses in a row, change the chance to 55 After 4 losses in a row, change the chance to 66 After 5 losses in a row, change the chance to 70 and so on... Can I do this in the programmer mode? This is definitely possible. A trend I've seen in this thread (and the world in general) is people aren't going to write a script for you just because you ask nicely. They usually don't mind helping you if you provide a script and say: this is what i have done so far, this is what i want it to do, I don't know how to do this, can anyone help me finish it. Or whats wrong and how can I fix it? Alternatively, you can just offer payment. note: Having access/permission to use a "good betting system" is not payment
|
|
|
|
5watt
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 23, 2016, 10:25:05 PM Last edit: June 24, 2016, 07:00:34 AM by 5watt |
|
Isn't this info already in the bot.seuntjie.com website? I thought discussion might be more productive. Do you actually know how to make a good pause/rest/wait function into this bot or were you just teasing me?
Why would you want to pause/rest/wait at all? The time of the bet has no influence on the result of a roll? I really don't see a point to using something like this but since you're asking for it, you can just use sleep(milliseconds:int) sleep(milliseconds:int) yayyy !!! thanks seuntjie, for current primedice suddent disconnect if we go without delay this one really helpfull is there any progamming code to do check every 30s if disconnect to restart dicebot ? thanks
|
|
|
|
Leatherass
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 24, 2016, 09:25:48 PM Last edit: June 24, 2016, 11:13:47 PM by Leatherass |
|
Okay, so after a decent amount of playing around with this dicebot all I can say is that it rocks. I've been playing around with Chilly2k's 2win 39,6% strategy, and decided to modify it abit and this is the result; https://i.gyazo.com/c42d2e5c72b7a0824d7aa1e08e0970d7.pngI've used it with primedice, because they allow 0bets. It most likely will bust at some point so I've decided to withdraw some profit (and there will ofcourse be some for Seuntjie and Chilly2k ). I think it would be ideal to use invest at sites that allow it, and to stop while its in the green. As you can see in the script, I've basically just changed the chance, martimulti (to sustain losestreak from the 20% chance), and ofcourse made a basebet2 to be used when it decides to go for a win. chance = 20 martimulti = 5 basebet = .00000000 basebet2 = .00000001 startbalance = balance nextbet = basebet savefactor = 1.25 target = .01 targetbalance = balance + target bethigh = true low = 0 high = 0 losecount = 0 stopnow = false totallose = 0 wincount = 0 nextwinbet = basebet2 * martimulti go = false set = false
function dobet()
if (lastBet.roll < chance) then low += 1 end if (lastBet.roll > (100 - chance)) then high += 1 end
if (win) then wincount += 1 totallose = 0 newbalance = balance if (high > low) then bethigh = true else bethigh = false end if (wincount == 1 and go) then nextbet = nextwinbet go = false set = false else nextbet = basebet end if (wincount == 2 and previousbet != basebet) then if (stopnow) then stop() end martimulti = 5 nextwinbet = basebet2 * martimulti set = true losecount = 0 if (balance > targetbalance) then -- invest((balance - targetbalance)+target) targetbalance = targetbalance + target newbalance = targetbalance end if (newbalance > startbalance * savefactor) then -- invest(balance-startbalance) targetbalance = startbalance + target startbalance = startbalance * savefactor end end if (wincount == 2) then go = true end else if (wincount == 1 and previousbet != basebet ) then nextwinbet = previousbet * martimulti martimulti = martimulti / 2 if (martimulti < 1.85) then martimulti = 1.85 end losecount += 1 print(losecount) else end wincount = 0 totallose = totallose + 1 if (totallose == 2) then go = true end nextbet = basebet end end EDIT: It will definitely go bust, but it's kinda fun to watch. Might be the luck I had in the first run that made it somewhat viable, oh well, back to the drawing board. Changing the multiplier to a lower number will make it able to sustain longer losestreaks in the winbets, and could be a short-term solution.
|
|
|
|
5watt
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 29, 2016, 07:51:44 AM |
|
when running progammer mode i got this error : System.Xml.XmlException: Encountered unexpected character '<'. at System.Xml.XmlExceptionHelper.ThrowXmlException(XmlDictionaryReader reader, XmlException exception) at System.Runtime.Serialization.Json.XmlJsonReader.ReadAttributes() at System.Runtime.Serialization.Json.XmlJsonReader.ReadNonExistentElementName(StringHandleConstStringType elementName) at System.Runtime.Serialization.Json.XmlJsonReader.Read() at System.Xml.XmlBaseReader.IsStartElement() at System.Xml.XmlBaseReader.IsStartElement(XmlDictionaryString localName, XmlDictionaryString namespaceUri) at System.Runtime.Serialization.XmlReaderDelegator.IsStartElement(XmlDictionaryString localname, XmlDictionaryString ns) at System.Runtime.Serialization.XmlObjectSerializer.IsRootElement(XmlReaderDelegator reader, DataContract contract, XmlDictionaryString name, XmlDictionaryString ns) at System.Runtime.Serialization.Json.DataContractJsonSerializer.InternalIsStartObject(XmlReaderDelegator reader) at System.Runtime.Serialization.Json.DataContractJsonSerializer.InternalReadObject(XmlReaderDelegator xmlReader, Boolean verifyObjectName) at System.Runtime.Serialization.XmlObjectSerializer.InternalReadObject(XmlReaderDelegator reader, Boolean verifyObjectName, DataContractResolver dataContractResolver) at System.Runtime.Serialization.XmlObjectSerializer.ReadObjectHandleExceptions(XmlReaderDelegator reader, Boolean verifyObjectName, DataContractResolver dataContractResolver)
btw in progammer mode / dice bot is this one possible : - restart - reconnect after timeout setting - scan current hash on site thank you
|
|
|
|
seuntjie
Legendary
Offline
Activity: 1717
Merit: 1125
|
|
June 29, 2016, 02:29:11 PM |
|
Can you post your script? and at which site are you betting at? This doesn't look like a programmer mode problem, but the bot doesn't use XML anywhere either, so I'm not sure what's causing your problem.
as for the other questions: bot does it on its own after 30 seconds then again every 2 minutes if the bot can get a connection again where possible, the bot already tries to reconnect. bitdice, betking and fortunejack should be the only ones that doesn't reconnect automatically the bot already does that
|
|
|
|
5watt
Newbie
Offline
Activity: 11
Merit: 0
|
|
June 29, 2016, 06:51:48 PM |
|
Can you post your script? and at which site are you betting at? This doesn't look like a programmer mode problem, but the bot doesn't use XML anywhere either, so I'm not sure what's causing your problem.
as for the other questions: bot does it on its own after 30 seconds then again every 2 minutes if the bot can get a connection again where possible, the bot already tries to reconnect. bitdice, betking and fortunejack should be the only ones that doesn't reconnect automatically the bot already does that
i'm testing elmobet66 strategy -- Set Win Chance chance= 66.0
-- Set BaseBet base=0.00000005
nextbet = base initbalance=balance first = true second = false secondwin = false third = false
betcount = 100 resetstats();
-- Before you START, check your Stop Conditions and ZigZag Settings in the Advance Mode
-- Set Stop Conditions and Zigzag Settings Enabled = true Disabled=false
enablezz = false enablesrc = false
-- set profit target here profittarget= 999.00100000
function dobet()
if betcount == 100 then betcount=0 resetseed(); else betcount=betcount+1 end
if (balance) >= profittarget then stop(); print(balance) print("TARGET ACHIEVED!!!") print("You Won") print(profit) print("for this Session") end
done = false
--Randomizer r=math.random(2)
if r == 1 then bethigh=true else bethigh=false end if win then if(first) then nextbet = base end if(second) then secondwin = true second = false third = true done = true end
if(third and !done) then
if (secondwin) then nextbet = base else nextbet = previousbet * 7 end
third = false first = true
end else
if(first and !done) then
first = false second = true done = true
end
if(second and !done) then
secondwin = false second = false third = true done = true
end
if(third and !done) then
third = false first = true print("GOING 4 THE WIN!!!")
if (secondwin) then nextbet = previousbet * 7 else nextbet = previousbet * 12 end
done = true
end end
if (initbalance)/2 < (nextbet) then stop(); print(balance) print("Emergency Stop") print("Large Bet Amount Occurred!") end
end
yes seuntjie, it's really great, but if it can be set lower that 2 mins it will be greater if not, it's ok, because it's my personal problem, vps i rent always disconnected, thank you very much
|
|
|
|
chilly2k (OP)
Legendary
Offline
Activity: 1007
Merit: 1000
|
|
June 29, 2016, 07:52:25 PM |
|
Can you post your script? and at which site are you betting at? This doesn't look like a programmer mode problem, but the bot doesn't use XML anywhere either, so I'm not sure what's causing your problem.
as for the other questions: bot does it on its own after 30 seconds then again every 2 minutes if the bot can get a connection again where possible, the bot already tries to reconnect. bitdice, betking and fortunejack should be the only ones that doesn't reconnect automatically the bot already does that
i'm testing elmobet66 strategy -- Set Win Chance chance= 66.0
-- Set BaseBet base=0.00000005
nextbet = base initbalance=balance first = true second = false secondwin = false third = false
betcount = 100 resetstats();
-- Before you START, check your Stop Conditions and ZigZag Settings in the Advance Mode
-- Set Stop Conditions and Zigzag Settings Enabled = true Disabled=false
enablezz = false enablesrc = false
-- set profit target here profittarget= 999.00100000
function dobet()
if betcount == 100 then betcount=0 resetseed(); else betcount=betcount+1 end
if (balance) >= profittarget then stop(); print(balance) print("TARGET ACHIEVED!!!") print("You Won") print(profit) print("for this Session") end
done = false
--Randomizer r=math.random(2)
if r == 1 then bethigh=true else bethigh=false end if win then if(first) then nextbet = base end if(second) then secondwin = true second = false third = true done = true end
if(third and !done) then
if (secondwin) then nextbet = base else nextbet = previousbet * 7 end
third = false first = true
end else
if(first and !done) then
first = false second = true done = true
end
if(second and !done) then
secondwin = false second = false third = true done = true
end
if(third and !done) then
third = false first = true print("GOING 4 THE WIN!!!")
if (secondwin) then nextbet = previousbet * 7 else nextbet = previousbet * 12 end
done = true
end end
if (initbalance)/2 < (nextbet) then stop(); print(balance) print("Emergency Stop") print("Large Bet Amount Occurred!") end
end
yes seuntjie, it's really great, but if it can be set lower that 2 mins it will be greater if not, it's ok, because it's my personal problem, vps i rent always disconnected, thank you very much For the error posted above try changing if (initbalance)/2 < (nextbet) then to if ((initbalance)/2 < (nextbet)) then The parens might be messing with the parser. Just my wild ass guess...
|
|
|
|
megalox
Member
Offline
Activity: 99
Merit: 10
|
|
July 06, 2016, 04:42:05 AM |
|
Hello Programmer..
could you please help me to make script for this betting sequence?
double every lose until it hit 2 green streaks,,
exp:
case 1
roll1 : 10 lose roll2 : 20 lose roll3 : 40 win roll4 : 40 win
back to base
case 2
roll 1: 10 lose roll 2: 20 lose roll 3: 40 win roll 4: 40 lose roll 5: 80 win roll 6: 80 win
back to base
it will double for every lose and back if win
thanks
|
|
|
|
seuntjie
Legendary
Offline
Activity: 1717
Merit: 1125
|
|
July 06, 2016, 06:07:33 AM |
|
Hello Programmer..
could you please help me to make script for this betting sequence?
double every lose until it hit 2 green streaks,,
exp:
case 1
roll1 : 10 lose roll2 : 20 lose roll3 : 40 win roll4 : 40 win
back to base
case 2
roll 1: 10 lose roll 2: 20 lose roll 3: 40 win roll 4: 40 lose roll 5: 80 win roll 6: 80 win
back to base
it will double for every lose and back if win
thanks
You don't need a script to do this, it can be done in the advanced mode. I'll post the exact settings as bit later as I'm about to go into a meeting
|
|
|
|
AXCESS
Newbie
Offline
Activity: 17
Merit: 0
|
|
August 05, 2016, 07:50:24 PM |
|
Hi, can somebody help me out to extend the script of chilly2k. I have tried it and tried it but none of my changes work. I'm not a programmer :/ What i want to change in this script is as follows. What this script do is if the first loss streak comes in it will keep betting on basebet, after 1 win it wil try to bet with a high value to get losses back like previousbet * 10, when it fails it wil betting the same again but and will wait till wins come in, then again after the losses and 1 win it wil bet much bigger bet size to get all previous losses back including the 1st time. If this is keep going you will loose everything. The change what i'm looking for is when the 1st loss strike comes in it will behave as original and doing basebets till first win and then it will do the bigbet like previousbet * 10. The when it wins turn to basebet but when it fails then do martingale till win and then return to basebet. Hope my discription is clear and someone can help me out. Sorry for the bad english Many thanks. Here is the original script: chance = 39.6 martimulti = 40 basebet = .00000001 startbalance = balance nextbet = basebet savefactor = 1.25 target = .01 targetbalance = balance + target bethigh = true low = 0 high = 0 losecount = 0 stopnow = false totallose = 0 wincount = 0 nextwinbet = basebet * martimulti go = false set = false function dobet() if (lastBet.roll < chance) then low += 1 end if (lastBet.roll > (100 - chance)) then high += 1 end if (win) then wincount += 1 totallose = 0 newbalance = balance if (high > low) then bethigh = true else bethigh = false end if (wincount == 1 and go) then nextbet = nextwinbet go = false set = false else nextbet = basebet end if (wincount == 2 and previousbet != basebet) then if (stopnow) then stop() end martimulti = 40 nextwinbet = basebet * martimulti set = true losecount = 0 if (balance > targetbalance) then invest((balance - targetbalance)+target) targetbalance = targetbalance + target newbalance = targetbalance end if (newbalance > startbalance * savefactor) then invest(balance-startbalance) targetbalance = startbalance + target startbalance = startbalance * savefactor end end if (wincount == 2) then go = true end else if (wincount == 1 and previousbet != basebet ) then nextwinbet = previousbet * martimulti martimulti = martimulti / 2 if (martimulti < 1.85) then martimulti = 1.85 end losecount += 1 print(losecount) else end wincount = 0 totallose = totallose + 1 if (totallose == 2) then go = true end nextbet = basebet end end
|
|
|
|
|