[ANN] Expanse (EXP) - 1st Stable fork of Ethereum (New Algo + PirlGuard)

[ivcelmik]

Hi Oc when you will set a pool?

[1714123841]

1714123841

[1714123841]

1714123841

[1714123841]

1714123841

[1714123841]

1714123841

[defaced]

Hi Oc when you will set a pool?

He could goahead and get everything setup, find peers and such, then when the new genesis comes out launch it.

[ivcelmik]

Hi Oc when you will set a pool?

He could goahead and get everything setup, find peers and such, then when the new genesis comes out launch it.

Ok thx

[GoldenEye]

Status Ubuntu 14.04 x64; Dual Stack (IPv4/IPv6);  Port 41356 UDP open (both IPv6 and IPv4)

After updating from github no change:
- no peer automatically found
- adding manually f944 successful
admin.addPeer("enode://f944c6702a78a0cbcd6505b76daff069dad2e45ff88896c475da2bef47091c88e5b4042211233e397ad958be998003a2674151e60719c5fdeeff5f8cc2c231a1@74.196.59.103:42786")
- adding peers given in OP failed
admin.addPeer("enode://4055ec69e53df4bfecb95e3b65c28e4f2a1145a3bdc4d85d077b552248cf159951afd649f044783bebf48b902fbc0e96978c76236fd4ab3d5ef7d95d72b84ee5@[::]:42786")

==> it seemed that only peers could be added manually, which contained an IPv4 address
==> peers given by the unspecified IPv6 addresss [::] were not found

So I tested to disable the IPv6 Stack:
bingo:

> admin.peers
[{
    Caps: "exp/60, exp/61",
    ID: "15a6ddec7c2e7fc67686557975b41c6308525a69c8ce56747d6ae9c7e9dc8910a4624443ffc1270 01f72f8f8fca4a67d04906e72d725d7b39dbff4454b8b2b28",
    LocalAddress: "192.168.0.101:41356",
    Name: "Gexp/v1.1.3/windows/go1.4.2",
    RemoteAddress: "68.197.12.14:42786"
}, {
    Caps: "exp/60, exp/61",
    ID: "4055ec69e53df4bfecb95e3b65c28e4f2a1145a3bdc4d85d077b552248cf159951afd649f044783 bebf48b902fbc0e96978c76236fd4ab3d5ef7d95d72b84ee5",
    LocalAddress: "192.168.0.101:60407",
    Name: "Gexp/v1.1.3-df8d5237/linux/go1.4",
    RemoteAddress: "45.55.217.136:42786"
}, {
    Caps: "exp/60, exp/61",
    ID: "f944c6702a78a0cbcd6505b76daff069dad2e45ff88896c475da2bef47091c88e5b4042211233e3 97ad958be998003a2674151e60719c5fdeeff5f8cc2c231a1",
    LocalAddress: "192.168.0.101:57212",
    Name: "Gexp/v1.1.2-74cee8c3/linux/go1.4",
    RemoteAddress: "74.196.59.103:42786"
}]

It seems, if IPv6 stack is enabled, the node tries to find peers using IPv6 only.
This will fail, because no peer is listening on an open IPv6 port.

Strange:
After reenabling the IPv6 Stack all is working well.
Seems that the node is caching known peers (like bitcon (peers.dat)

I cannot check this now, but perhaps this will help:
admin.addPeer("enode://4055ec69e53df4bfecb95e3b65c28e4f2a1145a3bdc4d85d077b552248cf159951afd649f044783bebf48b902fbc0e96978c76236fd4ab3d5ef7d95d72b84ee5@0.0.0.0:42786")

@defaced
any comments?

[defaced]

Status Ubuntu 14.04 x64; Dual Stack (IPv4/IPv6);  Port 41356 UDP open (both IPv6 and IPv4)

After updating from github no change:
- no peer automatically found
- adding manually f944 successful
admin.addPeer("enode://f944c6702a78a0cbcd6505b76daff069dad2e45ff88896c475da2bef47091c88e5b4042211233e397ad958be998003a2674151e60719c5fdeeff5f8cc2c231a1@74.196.59.103:42786")
- adding peers given in OP failed
admin.addPeer("enode://4055ec69e53df4bfecb95e3b65c28e4f2a1145a3bdc4d85d077b552248cf159951afd649f044783bebf48b902fbc0e96978c76236fd4ab3d5ef7d95d72b84ee5@[::]:42786")

==> it seemed that only peers could be added manually, which contained an IPv4 address
==> peers given by the unspecified IPv6 addresss [::] were not found

So I tested to disable the IPv6 Stack:
bingo:

> admin.peers
[{
    Caps: "exp/60, exp/61",
    ID: "15a6ddec7c2e7fc67686557975b41c6308525a69c8ce56747d6ae9c7e9dc8910a4624443ffc1270 01f72f8f8fca4a67d04906e72d725d7b39dbff4454b8b2b28",
    LocalAddress: "192.168.0.101:41356",
    Name: "Gexp/v1.1.3/windows/go1.4.2",
    RemoteAddress: "68.197.12.14:42786"
}, {
    Caps: "exp/60, exp/61",
    ID: "4055ec69e53df4bfecb95e3b65c28e4f2a1145a3bdc4d85d077b552248cf159951afd649f044783 bebf48b902fbc0e96978c76236fd4ab3d5ef7d95d72b84ee5",
    LocalAddress: "192.168.0.101:60407",
    Name: "Gexp/v1.1.3-df8d5237/linux/go1.4",
    RemoteAddress: "45.55.217.136:42786"
}, {
    Caps: "exp/60, exp/61",
    ID: "f944c6702a78a0cbcd6505b76daff069dad2e45ff88896c475da2bef47091c88e5b4042211233e3 97ad958be998003a2674151e60719c5fdeeff5f8cc2c231a1",
    LocalAddress: "192.168.0.101:57212",
    Name: "Gexp/v1.1.2-74cee8c3/linux/go1.4",
    RemoteAddress: "74.196.59.103:42786"
}]

It seems, if IPv6 stack is enabled, the node tries to find peers using IPv6 only.
This will fail, because no peer is listening on an open IPv6 port.

Strange:
After reenabling the IPv6 Stack all is working well.
Seems that the node is caching known peers (like bitcon (peers.dat)

I cannot check this now, but perhaps this will help:
admin.addPeer("enode://4055ec69e53df4bfecb95e3b65c28e4f2a1145a3bdc4d85d077b552248cf159951afd649f044783bebf48b902fbc0e96978c76236fd4ab3d5ef7d95d72b84ee5@0.0.0.0:42786")

@defaced
any comments?

That seems like an accurate description of what is happening

[GoldenEye]

That seems like an accurate description of what is happening

And what could be the solution for the average inexperienced user?
I think the client discover peers using IPv6 and IPv4 connections or it should prevent IPv6 connections.
And that should take place before the main launch, to allow a fair distribution!!

[CryptoBeef]

hi, i'm CryptoBeef !

https://i.imgur.com/ibYzNuG.png

let's go

[GoldTiger69]

Me GPU mining on windows to a linux daemon on my local network

What miner is it?  And how do you point the miner towards your daemon?
I can only use ethminer on the same box that's running the daemon. I tried using my local ip address and several rpc ports but it can't connect

[GoldenEye]

please update the Linux instructions in OP (needed installing on a fresh Ubuntu 14.04)

sudo apt-get install git binutils bison gcc make libgmp3-dev curl
touch ~/.bashrc             (if file not exist, the installer creates no entry and gvm will not be found)
bash < <(curl -s -S -L https://raw.githubusercontent.com/moovweb/gvm/master/binscripts/gvm-installer)
<logout><login>      (to take change in .bashrc in effect)
gvm install go1.4
gvm use go1.4 --default
git clone -b develop http://www.github.com/expanse-project/go-expanse.git 
cd go-expanse
make gexp

[benjy33]

https://drive.google.com/file/d/0B6-zgS8gYXFaRmtfeEpLZTFqZzA/view?usp=sharing

Everyone on windows having problems give this zip a try.

It comes with 64 bit version of gexp and bat files that make the process smooth as possible.

Report back please.

Yeees...now connected and working.

hello help me please?

Download this from https://drive.google.com/file/d/0B6-zgS8gYXFaRmtfeEpLZTFqZzA/view?usp=sharing
 and then

Step-1 new account (passwords are invisible, enter password, hit enter, enter password again, hit enter)
Step-2 genesis (just click that) but u have to edit the file and replace geth with gexp then u close it with CTRL+C
Step-3 Start Expanse
Step-4 gpu_mining_solo

ok thank you very much and it seems that this undermining and how I see my balance as is transferred thanks

[ocminer]

Pool is ready for pre-reg:

https://exp.suprnova.cc

I'll launch the pool approx 6-8 hours after coin launch, so there is plenty of time for you guys to solo and get the rigs etc. running

[kohonez]

please update the Linux instructions in OP (needed installing on a fresh Ubuntu 14.04)

sudo apt-get install git binutils bison gcc make libgmp3-dev curl
touch ~/.bashrc             (if file not exist, the installer creates no entry and gvm will not be found)
bash < <(curl -s -S -L https://raw.githubusercontent.com/moovweb/gvm/master/binscripts/gvm-installer)
<logout><login>      (to take change in .bashrc in effect)
gvm install go1.4
gvm use go1.4 --default
git clone -b develop http://www.github.com/expanse-project/go-expanse.git 
cd go-expanse
make gexp

That works! thank you!

[kondiomir]

Anyone knows how to check my wallet balance ?

[randywald]

Pool is ready for pre-reg:

https://exp.suprnova.cc

I'll launch the pool approx 6-8 hours after coin launch, so there is plenty of time for you guys to solo and get the rigs etc. running

Awesome! I will switch to the pool after some hours or days of solo mining.

[arloseb]

Much more interesting then the other scam eth fork coin out some weeks ago with big premine.

And there is also a legit dev here.

[anderson705]

Anyone knows how to check my wallet balance ?

web3.fromWei(exp.getBalance(exp.coinbase))   

[go6ooo1212]

I finish the guide with step 3 , with that console :

Code:

instance: Gexp/v1.1.3/windows/go1.4.2
 datadir: C:\Users\Joro\AppData\Roaming\Expanse
coinbase: 0x7b19037db71f10bd38c9a5e1608e6f50e7af2a87
at block: 7785 (Sun, 13 Sep 2015 22:35:33 EEST)
modules: admin:1.0 db:1.0 debug:1.0 exp:1.0 miner:1.0 net:1.0 personal:1.0 shh:1
.0 txpool:1.0 web3:1.0
>

[CowboyKiller]

Much more interesting then the other scam eth fork coin out some weeks ago with big premine.

And there is also a legit dev here.

Pity this premine is 44x larger than Shifts.

[kondiomir]

Anyone knows how to check my wallet balance ?

web3.fromWei(exp.getBalance(exp.coinbase))   

What a command. Thanks a lot btw

[BitcoinForumator]

Couple of noob issues for Win 64:

Step 1 new account - OK
Step 2 - OK I guess
Step 3 - I get "Fatal: blockchain db err: The process cannot access the file..."
Step 4 -