Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Teress]

Claymore, ASM is not suitable for RX460? It is not working, still only etha 0.

What is the speed of RX460 on ETH and on ETH+DCR?

2x RX460 get 24.1 MHs on ETH

each or total?

Oh God, I wrote "2x", that means two cards... If I want to write hashrate for one card I would write "1x"...

[marvykkio]

I went back to version 9.0, and now and unstable them as well, various gpu rise and fall of hasherate, 21, 11 mhs, never had so low hash, what's going on with my standard mod bios was always 28.7 now no more arrive at these speeds
 

[501026666]

Hello ,I using 9.1 for ETH+PASC 
PASC speedup is true ,but ETH speed get -20% down.
WHY?

[jackbox]

Hello ,I using 9.1 for ETH+PASC 
PASC speedup is true ,but ETH speed get -20% down.
WHY?

Press "-" key to lower -dcri value. Find your sweet spot. When I first used 9.1 ETH has was 60% lower until I found the best -dcri value for my card. Once you find that edit your bat file you start the miner with so it is set every time. I wound up getting same ETH speed as 9.0 but my PASC is hashing about 9% faster.

[501026666]

Hello ,I using 9.1 for ETH+PASC 
PASC speedup is true ,but ETH speed get -20% down.
WHY?

EthDcrMiner64.exe -epool eth.f2pool.com:8008 -ewal 0x42b1c31d5f7ba237f6b9eb6b78bd39198302654e -epsw x -dpool stratum+tcp://pasc-asia1.nanopool.org:15555 -dwal 86646-64.300e5beb46d19581.xmr-pc/georgeandy@126.com -dpsw x -dcoin pasc -etht 1000 -dcrt 1000 -ftime 10

that is my parameters

--------------------------------------------
when i using 9.0 . ETH get 22 M   PASC geg 330M
now i try to using 9.1 ETH get 17M PASC get 500M+
any idea to keep my ETH speed on 22M？

[501026666]

Hello ,I using 9.1 for ETH+PASC 
PASC speedup is true ,but ETH speed get -20% down.
WHY?

Press "-" key to lower -dcri value. Find your sweet spot. When I first used 9.1 ETH has was 60% lower until I found the best -dcri value for my card. Once you find that edit your bat file you start the miner with so it is set every time. I wound up getting same ETH speed as 9.0 but my PASC is hashing about 9% faster.

can you share you dcri value ?

[jackbox]

Hello ,I using 9.1 for ETH+PASC 
PASC speedup is true ,but ETH speed get -20% down.
WHY?

EthDcrMiner64.exe -epool eth.f2pool.com:8008 -ewal 0x42b1c31d5f7ba237f6b9eb6b78bd39198302654e -epsw x -dpool stratum+tcp://pasc-asia1.nanopool.org:15555 -dwal 86646-64.300e5beb46d19581.xmr-pc/georgeandy@126.com -dpsw x -dcoin pasc -etht 1000 -dcrt 1000 -ftime 10

that is my parameters

--------------------------------------------
when i using 9.0 . ETH get 22 M   PASC geg 330M
now i try to using 9.1 ETH get 17M PASC get 500M+
any idea to keep my ETH speed on 22M？

You don't have a -dcri value set. Default is 30. As I said while the miner is running use the - and + keys to change the -dcri value. Find the best value for your card and then put that value in the startup string. For example mine is "-dcri 14".

[jackbox]

Hello ,I using 9.1 for ETH+PASC 
PASC speedup is true ,but ETH speed get -20% down.
WHY?

Press "-" key to lower -dcri value. Find your sweet spot. When I first used 9.1 ETH has was 60% lower until I found the best -dcri value for my card. Once you find that edit your bat file you start the miner with so it is set every time. I wound up getting same ETH speed as 9.0 but my PASC is hashing about 9% faster.

can you share you dcri value ?

It is different for every card. Use the - and + keys to find your sweet spot for you card and then put that in your start.bat file.

[501026666]

Hello ,I using 9.1 for ETH+PASC 
PASC speedup is true ,but ETH speed get -20% down.
WHY?

EthDcrMiner64.exe -epool eth.f2pool.com:8008 -ewal 0x42b1c31d5f7ba237f6b9eb6b78bd39198302654e -epsw x -dpool stratum+tcp://pasc-asia1.nanopool.org:15555 -dwal 86646-64.300e5beb46d19581.xmr-pc/georgeandy@126.com -dpsw x -dcoin pasc -etht 1000 -dcrt 1000 -ftime 10

that is my parameters

--------------------------------------------
when i using 9.0 . ETH get 22 M   PASC geg 330M
now i try to using 9.1 ETH get 17M PASC get 500M+
any idea to keep my ETH speed on 22M？

You don't have a -dcri value set. Default is 30. As I said while the miner is running use the - and + keys to change the -dcri value. Find the best value for your card and then put that value in the startup string. For example mine is "-dcri 14".

thank you so much !

[Ursul0]

Shit this is awesome.... Is there something like this for Android?

https://play.google.com/store/apps/details?id=ua.com.bcmob.claymoresdualminermonitor

[Mindworker]

After installing the creator update for Windows 10, i get the message “ethdcrminer64.exe has stopped working“. In the details it's called “bex64“ error. Anybody out there with similar problems or ideas how to solve this? The regular ethminer.exe is still working. Sgminer is also working as usual.
Any hints are appreciated!

install new drivers

I already installed the latest Radeon drivers, they are from April, which version so you mean?

[Vasyok55555]

The problem has not changed, after the reboot of the miner, the whole system hangs.
It is necessary to use r-1

Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal AMD+NVIDIA GPU Miner.
=========================

Latest version is v9.1:

[piposen]

Hi there, hope you can help me out. Im trying to start claymore miner but after poolinfo it closes the window (crashes?)

Im really new and that is my first time im trying to mine with Claymore.

I have a MSI H270 PC MATE Board with 16GB Ram (4x4gb) and i3 Processor

Win10 64bit

Single AMD RX480 Nitro+ OC no rizer of course. (Driver 17.10.1711 Crimson)

ethminer 0.9.41 genoil is working with proxy on ethermin.org with 24mh/s

start.bat for Claymore

EthDcrMiner64.exe -epool eu2.ethermine.org:4444 -ewal 0xDea95688970af2C164d7Ff804501d3a03265d424.serveri3 -epsw x

Screenshot:
https://s10.postimg.org/txq79y1gp/claymore.png

Thanks a lot!

[Klaasje]

Hi there, hope you can help me out. Im trying to start claymore miner but after poolinfo it closes the window (crashes?)

Im really new and that is my first time im trying to mine with Claymore.

I have a MSI H270 PC MATE Board with 16GB Ram (4x4gb) and i3 Processor

Win10 64bit

Single AMD RX480 Nitro+ OC no rizer of course. (Driver 17.10.1711 Crimson)

ethminer 0.9.41 genoil is working with proxy on ethermin.org with 24mh/s

start.bat for Claymore

EthDcrMiner64.exe -epool eu2.ethermine.org:4444 -ewal 0xDea95688970af2C164d7Ff804501d3a03265d424.serveri3 -epsw x

Screenshot:


Thanks a lot!

wrong link to pool EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xDea95688970af2C164d7Ff804501d3a03265d424.serveri3 -epsw x

[piposen]

Hi there, hope you can help me out. Im trying to start claymore miner but after poolinfo it closes the window (crashes?)

Im really new and that is my first time im trying to mine with Claymore.

I have a MSI H270 PC MATE Board with 16GB Ram (4x4gb) and i3 Processor

Win10 64bit

Single AMD RX480 Nitro+ OC no rizer of course. (Driver 17.10.1711 Crimson)

ethminer 0.9.41 genoil is working with proxy on ethermin.org with 24mh/s

start.bat for Claymore

EthDcrMiner64.exe -epool eu2.ethermine.org:4444 -ewal 0xDea95688970af2C164d7Ff804501d3a03265d424.serveri3 -epsw x

Screenshot:
https://s10.postimg.org/txq79y1gp/claymore.png

Thanks a lot!

wrong link to pool EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xDea95688970af2C164d7Ff804501d3a03265d424.serveri3 -epsw x

Thank you! I tried this now:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xDea95688970af2C164d7Ff804501d3a03265d424.serveri3 -epsw x

Same Result: 

https://s13.postimg.org/xh86xne47/claymore2.png


without the "setx" also same

[aarons6]

Shit this is awesome.... Is there something like this for Android?

https://play.google.com/store/apps/details?id=ua.com.bcmob.claymoresdualminermonitor

i would highly suggest against opening port 3333 on your router and using an app like this to control your miners.. doing so would let anyone with your ip address change settings..

this app seems to be mostly designed to be used on your home network when you are connected with wifi.

[vapourminer]

What is the speed of RX460 on ETH and on ETH+DCR?

12 eth only, 11.6/184 eth/dcr. visiontek 4 gb, -dcri 32

asm=off

[Arnoldent]

What is the speed of RX460 on ETH and on ETH+DCR?

12 eth only, 11.6/184 eth/dcr. visiontek 4 gb, -dcri 32

asm=off

It is too bad that we cannot use ASM.

[Teress]

What is the speed of RX460 on ETH and on ETH+DCR?

12 eth only, 11.6/184 eth/dcr. visiontek 4 gb, -dcri 32

asm=off

It is too bad that we cannot use ASM.

Claymore wrote me, that to work ASM on RX460 he must build separate binary for this card. Maybe he will do it in future, maybe not. It would be nice. I think if there will be more people who wants it too, than he will do it.

[jackbox]

What is the speed of RX460 on ETH and on ETH+DCR?

12 eth only, 11.6/184 eth/dcr. visiontek 4 gb, -dcri 32

asm=off

It is too bad that we cannot use ASM.

Claymore wrote me, that to work ASM on RX460 he must build separate binary for this card. Maybe he will do it in future, maybe not. It would be nice. I think if there will be more people who wants it too, than he will do it.

Are the RX 460 still power efficient enough that at those low hash rates people can still make money if they haven't already ROI'd on the card?