Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Omg9500]

https://i.imgur.com/EL9xHtp.gif

My experience with 11.4 and Stale Shares.
Arrow marks the spot where I upgraded from 11.3 to 11.4
The image is 11.3 to left of arrow and 11.4 to the right.

I would say this is a great success in reducing stale shares from 11.3 to 11.4
Also everything else is stable, running cool and hash rates are equal to or greater than all other Claymore versions.

I would say this is a complete success.

where do you get this graph?

Ethermine mining pool.

Yes. Ethermine mining pool.

OK. I am on Nanopool.

[Elange]

Before 11.2 my RX 580 Nitro+ SE (Micron) cards were absolutely stable at 2240 mhz, but 11.2+ causes reboot after 10 seconds of mining. New max frequency is 2080
Other cards (various 570 and 580) still working without issues.

Yep, same thing here, less stable. However, you can use the new -ethi X parameter to reduce intensity. Supposedly, with 11.2 higher intensity was introduced, producing better hashrate.

[BeerMan81]

Success here too, however all is not well just yet.

First, thanks for the stale shares fix on Ethermine, and the 1.5% improvement on hashrate.. We went from 4% to 1% stale shares and 5540 to 5625 MH/s (191 GPUs).

However, every hour (dev fee) there seems to be an issue where random rigs stop mining. Prior to 11.x I had roughly 10-12 days without downtime. This was still happening after upgrading to 11.4. Someone in ethOS chat mentioned that this is related to the new SSL stratum connection. After reverting to the old non-SSL port, the issue went away. So, if anyone is experiencing random mining stoppage, I would suggest you do the same.

Working great now! But, we need a reliable SSL connection. This was a great idea, and I look forward to being able to use it reliably in the future.

[nars28]

Switched to Phoenix miner after being years on Claymore. Phoenix is more lightweight, produces almost same hashrate and is more stable. Stale shares went drastically down. And Claymore had a huge problem for some of my rigs, it was switching between pools like crazy, constantly droping out the connection to main pool. Phoenix fixed this.

[53nsk]

Before 11.2 my RX 580 Nitro+ SE (Micron) cards were absolutely stable at 2240 mhz, but 11.2+ causes reboot after 10 seconds of mining. New max frequency is 2080
Other cards (various 570 and 580) still working without issues.

Question is at what hashrate your cards were running.... My Nitro+ RX580 are running at 1175/850 core and 2200/875 mem and output per card is 31.5 mh/s. this is from claymore 11.4

Same as yours - 31.5 mh/s at 2240, now 30.1 mh/s at 2080.

Before 11.2 my RX 580 Nitro+ SE (Micron) cards were absolutely stable at 2240 mhz, but 11.2+ causes reboot after 10 seconds of mining. New max frequency is 2080
Other cards (various 570 and 580) still working without issues.

Yep, same thing here, less stable. However, you can use the new -ethi X parameter to reduce intensity. Supposedly, with 11.2 higher intensity was introduced, producing better hashrate.

Thanks, gonna investigate this issue later and try ethi too.

[Omg9500]

One difference I discovered between v11.3 and 11.4: one of my cards shows temp. 58 C an the fan at 86% in claymore 11.3... in claymore 11.4 same card at temp 58 the fan is at 96%. settings in claymore TT 60 and FANMAX 85

[Omg9500]

Switched to Phoenix miner after being years on Claymore. Phoenix is more lightweight, produces almost same hashrate and is more stable. Stale shares went drastically down. And Claymore had a huge problem for some of my rigs, it was switching between pools like crazy, constantly droping out the connection to main pool. Phoenix fixed this.

Does Phoenix support dualmining?

[BTC22]

I need a little help guys. I have one AMD card (will be adding more) to my 7 card Nidvia rig. I only want to use Claymore for the AMD card. This is my bat file, but it's still running all the cards. Can someone tell me what I need to do to tweak it?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

-di 0

EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal 0xfe943a6dabf68375754d07044812f76a0dd01d64 -epsw x

[Viaggiatore]

any feedback for stale shares? and what about incorrect shares?

Zero incorrects for 16 hours, 1% stale shares, sometimes 2% and sometimes 0%.

Are you single mining or dual mining? I get incorrects on dual mining, like 4% in 18 hours while no incorrects in single mining...

[big al]

Got 4% incorrect over night again even though I turned down the cards further.  This is dual mining.

Might just revert to 10.6.  The effective rate was much higher and the cards were stable at higher speeds.

[juanichiloco]

Just switched to 11.4 from 11.0, seeing a better hashrate 138 vs 135 with 5x RX570.

Has anyone tested to see if there is much increase in power usage at the wall with the newest version?

[Viaggiatore]

Got 4% incorrect over night again even though I turned down the cards further.  This is dual mining.

Might just revert to 10.6.  The effective rate was much higher and the cards were stable at higher speeds.

So exactly like me, I'll revert back to 11.1 until this issue with dual will be sorted out

[Bigdrago]

I need a little help guys. I have one AMD card (will be adding more) to my 7 card Nidvia rig. I only want to use Claymore for the AMD card. This is my bat file, but it's still running all the cards. Can someone tell me what I need to do to tweak it?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

-di 0

EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal 0xfe943a6dabf68375754d07044812f76a0dd01d64 -epsw x

Insert -di 0 into config.txt

[mayers8851]

any feedback for stale shares? and what about incorrect shares?

Zero incorrects for 16 hours, 1% stale shares, sometimes 2% and sometimes 0%.

Are you single mining or dual mining? I get incorrects on dual mining, like 4% in 18 hours while no incorrects in single mining...

Single mining.

[slymbal007]

Success here too, however all is not well just yet.

First, thanks for the stale shares fix on Ethermine, and the 1.5% improvement on hashrate.. We went from 4% to 1% stale shares and 5540 to 5625 MH/s (191 GPUs).

However, every hour (dev fee) there seems to be an issue where random rigs stop mining. Prior to 11.x I had roughly 10-12 days without downtime. This was still happening after upgrading to 11.4. Someone in ethOS chat mentioned that this is related to the new SSL stratum connection. After reverting to the old non-SSL port, the issue went away. So, if anyone is experiencing random mining stoppage, I would suggest you do the same.

Working great now! But, we need a reliable SSL connection. This was a great idea, and I look forward to being able to use it reliably in the future.

https://i.imgur.com/lqukTnf.png

https://medium.com/@bitfly/ethermine-stratum-security-upgrade-d2245076e1b5

use ssl://eu1.ethermine.org:5555 for example.Reliable SSL server

[janding]

Success here too, however all is not well just yet.

First, thanks for the stale shares fix on Ethermine, and the 1.5% improvement on hashrate.. We went from 4% to 1% stale shares and 5540 to 5625 MH/s (191 GPUs).

However, every hour (dev fee) there seems to be an issue where random rigs stop mining. Prior to 11.x I had roughly 10-12 days without downtime. This was still happening after upgrading to 11.4. Someone in ethOS chat mentioned that this is related to the new SSL stratum connection. After reverting to the old non-SSL port, the issue went away. So, if anyone is experiencing random mining stoppage, I would suggest you do the same.

Working great now! But, we need a reliable SSL connection. This was a great idea, and I look forward to being able to use it reliably in the future.

https://medium.com/@bitfly/ethermine-stratum-security-upgrade-d2245076e1b5

use ssl://eu1.ethermine.org:5555 for example.Reliable SSL server

If you're using 11.3 or 11.4 the devfee connection still goes to the secure ssl port 5555, even though you may have set it up to use the non secure
port 4444 connection for mining. That's what I see in the logs. Changing to the 4444 port should not help anyone's situation as far as I can tell if
you're using .3 or .4 versions. If I'm wrong please let me know.

[BTC22]

I need a little help guys. I have one AMD card (will be adding more) to my 7 card Nidvia rig. I only want to use Claymore for the AMD card. This is my bat file, but it's still running all the cards. Can someone tell me what I need to do to tweak it?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

-di 0

EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal 0xfe943a6dabf68375754d07044812f76a0dd01d64 -epsw x

Insert -di 0 into config.txt

Seems to have done it. Thanks again.

[BTC22]

I need a little help guys. I have one AMD card (will be adding more) to my 7 card Nidvia rig. I only want to use Claymore for the AMD card. This is my bat file, but it's still running all the cards. Can someone tell me what I need to do to tweak it?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

-di 0

EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal 0xfe943a6dabf68375754d07044812f76a0dd01d64 -epsw x

Insert -di 0 into config.txt

Seems to have done it. Thanks again.

Yeah, it's still reading all cards. I don't get  it.

[atecubanoS]

Guys,

Which is the best ETH mining pool?

I'm using Suprnova but I don't know if it is good or if I should change to another one...

Thanks

[j2james]

Changes made in v11.4 are related only to AMDs or to NVIDIAs too? I am asking because my Nvidia rigs can run without crashed only on v10.6 version. v11 above is a tragedy for Nvidias

For me too. I have tried to use any 11.x version, but all of them have strange hashrate. It is less then in 10.6. So I rolled back again to 10.6 (