Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[tenmoi]

Hi guys, about dual ETH + XVG, how many coins do you actually get on daily basis and which HW and pool do you use?
It used to be a lot several weeks ago when Claymore introduced blake2s with 11.0. Around 700-80 coins/day with 6x RX580 if I remember well, even though all pools were very unstable at the time. Where do we stand today?

Thanks

Running Rx 570 4G. Nlpool. Dual mining at 6880 mz and get 6 xvgs per 3 hours. Unimining is a thief. Don't mind there.

[tenmoi]

Hi

I'm trying to mine keccak-c at http://yiimp.eu/

I use this bat line: stratum + tcp: //yiimp.eu: 5134 -dwal My_wallet_ crea dpsw c = CREA

And it does not work. Do you know if it's possible to mine keccak-c or is only possible keccak with Claymore?

regards!!

I don’t mine keccak, but I think you must type c=CREA as one word, no spaces in the word I mean.

[andrenym00]

Etherum only mining.  I set dcri to 25 and my hash rate went up and seems more stable.  I thought dcri was only  for dual mining? I did this because 11.2 says to press + or- in beginning.

[Cripto Boom]

Hi

I'm trying to mine keccak-c at http://yiimp.eu/

I use this bat line: stratum + tcp: //yiimp.eu: 5134 -dwal My_wallet_ crea dpsw c = CREA

And it does not work. Do you know if it's possible to mine keccak-c or is only possible keccak with Claymore?

regards!!

I don’t mine keccak, but I think you must type c=CREA as one word, no spaces in the word I mean.

I have been trying to mine Creative Coin too but everytime i try it rejects 100% of my shares, so im just mining smartcash right now, however if there is a way to mine Keccak-c and mine creative coin I would rather mine that, If anyone got it to work and wants to help out that would be great

[tmc1989]

Hello guys,

I have 6PCS Sapphire nitro+ rx580 4GB samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?


Thanks

[tenmoi]

Hello guys,

I have 6PCS Sapphire nitro+ rx580 samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?


Thanks

Those cards should do 30.xx if you mod the bios. There are lots of tutorials on YouTube. And check the amount of RAM of your card. 8G cards use different straps from those of 4G ones.

[tmc1989]

Hello guys,

I have 6PCS Sapphire nitro+ rx580 samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?


Thanks

Those cards should do 30.xx if you mod the bios. There are lots of tutorials on YouTube. And check the amount of RAM of your card. 8G cards use different straps from those of 4G ones.

Hello tenmoi,

Mine is 4GB. Do you mean mod mobo bios or GPU bios? I curious why 5 GPUs are in low hashrate. I searched youtube but dont have tutorial to fix this issue.

[torrespr77]

Hello guys,

I have 6PCS Sapphire nitro+ rx580 4GB samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?


Thanks

you should try the appropriate mining special designed AMD drivers, the ones from Aug 23 are a good ones. also BiosMod each card with Atiflash, lot of tutorials out there, look out the BurierOne tutorial on youtube.

[tmc1989]

Hello guys,

I have 6PCS Sapphire nitro+ rx580 4GB samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?


Thanks

you should try the appropriate mining special designed AMD drivers, the ones from Aug 23 are a good ones. also BiosMod each card with Atiflash, lot of tutorials out there, look out the BurierOne tutorial on youtube.

Hello torrespr77,

Special designed AMD driver? Do you mean blockchain driver? https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx Mod mobo bios or each GPU? Because I have no idea what is the issue for this one. I dont found any tutorial by BurierOne.

[patinencomun]

Virus detected v11.2 ... https://www.microsoft.com/en-us/wdsi/threats/malware-encyclopedia-description?Name=Trojan:Win32/CoinMiner!bit
Should I live with that? 

[GoBlack]

I found critical bug with rejected shares (about 1%), you can see them sometimes. Fixing it, I will re-upload v11.2 within an hour.

Yeah I'm having the same problem as the original poster 11.1 works fine but 11.2 gives me a few more MH/s but causes GPU's to crash in the first 10-20 minutes.
I can keep them up only if I dial back the OC settings which defeats the purpose. I'm back on 11.1 again.

[cryptoillusion1]

Virus detected v11.2 ... https://www.microsoft.com/en-us/wdsi/threats/malware-encyclopedia-description?Name=Trojan:Win32/CoinMiner!bit
Should I live with that? 

See 'Known issues' on page 1

[cryptoillusion1]

Hello guys,

I have 6PCS Sapphire nitro+ rx580 4GB samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?


Thanks

you should try the appropriate mining special designed AMD drivers, the ones from Aug 23 are a good ones. also BiosMod each card with Atiflash, lot of tutorials out there, look out the BurierOne tutorial on youtube.

Hello torrespr77,

Special designed AMD driver? Do you mean blockchain driver? https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx Mod mobo bios or each GPU? Because I have no idea what is the issue for this one. I dont found any tutorial by BurierOne.

What driver are you using if there are the new ones have you got all GPU in compute mode

If you want to learn how to mod just Google and you will find a lot of tutorials

[tmc1989]

Hello guys,

I have 6PCS Sapphire nitro+ rx580 4GB samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?


Thanks

you should try the appropriate mining special designed AMD drivers, the ones from Aug 23 are a good ones. also BiosMod each card with Atiflash, lot of tutorials out there, look out the BurierOne tutorial on youtube.

Hello torrespr77,

Special designed AMD driver? Do you mean blockchain driver? https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx Mod mobo bios or each GPU? Because I have no idea what is the issue for this one. I dont found any tutorial by BurierOne.

What driver are you using if there are the new ones have you got all GPU in compute mode

If you want to learn how to mod just Google and you will find a lot of tutorials

Now I using the latest driver from sapphiretech. Now I have no idea why my 5 GPU are low hasrate which around 17.xx mhs and only 1 GPU at 25.xx mhs. I googled around but can't find any solution to fix it.

[DBAGI]

Tried 11.2 miner. Worked well for few hours with little more hashrate but after that - constant crashing and after crash I cannot even start it again. Back using 11.1 version.

[cryptoillusion1]

Hello guys,

I have 6PCS Sapphire nitro+ rx580 4GB samsung Chipset, fresh installed Windows 10 x64 on mobo Biostar TB250-BTC. 5 GPUS running at 17.xx mhs and only 1 GPU running at 25.xx mhs. How to fix this issue in order to get all GPUS runnig at 25.xx mhs?


Thanks

you should try the appropriate mining special designed AMD drivers, the ones from Aug 23 are a good ones. also BiosMod each card with Atiflash, lot of tutorials out there, look out the BurierOne tutorial on youtube.

Hello torrespr77,

Special designed AMD driver? Do you mean blockchain driver? https://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx Mod mobo bios or each GPU? Because I have no idea what is the issue for this one. I dont found any tutorial by BurierOne.

What driver are you using if there are the new ones have you got all GPU in compute mode

If you want to learn how to mod just Google and you will find a lot of tutorials

Now I using the latest driver from sapphiretech. Now I have no idea why my 5 GPU are low hasrate which around 17.xx mhs and only 1 GPU at 25.xx mhs. I googled around but can't find any solution to fix it.

have you got all GPU in compute mode

[JoMan]

i think you get around 3-5 xvg/ day for each rx 580...if you have 6 maybe not so profitable to give extra watts/card for 3-5 coins/day

I have 9 x RX 570 and 7 x RX 470
Claymore is reporting about 18 GH/s but nlpool is reporting around 15 GH/s
No many rejected shares so I don't know why there is a discrepancy.
Its early days for me and I need another 24hrs as i was dicking around with the latest AMD driver (well 18.1.1) and trying to get the [Suspicious link removed]pute part working!

Last 24hrs I earned 50 coins but i had a fair bit of downtime
WTM indicates 73 coins per day at a conservative 17 GH/s but note that WTM website difficulty is only 7.9m whereas pool indicates difficulty of 9.25m

Oh yes, its 400w extra over the 16 cards so, it is profitable where I live.

Shallowgas

Running Rx 570 4G. Nlpool. Dual mining at 6880 mz and get 6 xvgs per 3 hours. Unimining is a thief. Don't mind there.

Thanks a lot! I'll give it a try. To directly compare results, I'll set some machines to unimining and some to nlpool.
Any other experiences are more than welcome.

[Pastonia]

Tried 11.2 miner. Worked well for few hours with little more hashrate but after that - constant crashing and after crash I cannot even start it again. Back using 11.1 version.

Reducing the clock frequency will solve that.

[tg88]

Tried 11.2 miner. Worked well for few hours with little more hashrate but after that - constant crashing and after crash I cannot even start it again. Back using 11.1 version.

Reducing the clock frequency will solve that.

I also had to reduce the frequency in some rig's, after that everything normal.

[new24core]

I have a really annoying problem, with one mining rig, where I want to use my onboard GPU as the primary graphics but I can't. In MS Windows 10 I have a scheduled task to reboot once a day.  On one rig all works fine but on the other rig I get the following error :

start building OpenCL program for GPU 0...
.
.
.
Miner cannot initialize for 5 minutes, need to restart miner!
ADL: CAnnot find any AMD adapters.

The funny thing is that once I remote into the rig the miner can then see the cards.

Please note in the log just before is does state that there are 5 cards found.

Anyone seen this problem ?